Digitalization freelance

"A steady stream and self-control will harness curiosity and passion"

Drafter / Designer, Engineer, Inspector

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

I am an Environmental Engineer with Sustainability Engineering master’s degree. I am a highly motivated engineer, experienced on variety of different environmental, construction and energy sectors, with excellent understanding of Project Management, Environmental Management System, Maintenance, Landfill, Waste to Energy, Water and Wastewater Treatment, Regularity Compliance, GHG Calculation and Reduction, Data Analysis and Reporting.

* 7 years experience in QHSE Implementation on Plant and Construction. * 6 years experience in mastered project workflow from Budgeting, DED, Bidding, and Scheduling to Supervision and Reporting. * Proficient in PFD, P&ID, AutoCAD, SAP2000, Lifting Plan Calculation, Scaffolding Supervision, Wastewater Management, Drone Pilot. * Have multidisciplinary knowledge of Mechanical, Electrical, Automation, Process safety and even experience in calculating IRR, NPV, BEP in green project feasibility studies.

Engineer, Superintendent, Manager

With 20 years of experience in drafting and engineering design, I specialize in P&ID drafting, SolidWorks modeling, AutoCAD customization, and automation solutions to optimize engineering workflows. My experience spans across different industries including O&G, PetroChemical, Mining, food, industrial, and automotive manufacturing, where I’ve delivered high-precision designs, process diagrams, and automation tools to streamline operations. 🔹 What I Offer: ✔ P&ID Drafting & CAD Administration – Expertise in iDrawings, SmartPlant P&ID, AutoCAD, and AVEVA. ✔ SolidWorks 3D Modeling – Design of mechanical parts, assemblies, and industrial fixtures. ✔ AutoCAD & SolidWorks Automation – Custom scripts, LISP routines, and macros for efficiency. ✔ Excel & Database Integration – Automating reports, data processing, and engineering calculations. ✔ Project Management – 4+ years of leading projects, coordinating teams, and delivering quality results. I thrive on efficiency, accuracy, and automation, ensuring every project execution is optimized for quality on-time deliverable. Whether you need detailed P&IDs, 3D models, or custom automation solutions, I can deliver cost-effective, high-quality results tailored to your needs.

Drafter / Designer, Manager, Supervisor / Technician, Other

Fast learner, fast adaptation and hard working

Drafter / Designer, Engineer

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Electrical Engineer with 12 years of working experience in engineering, construction, commissioning, hook-up within Oil & Gas industry.

Engineer

A professional geophysicist with +20 years of international exposure in exploration and development of oil and with core knowledge in rock physics, geological modeling, seismic data acquisition, processing, , prospect & leads generator, and seismic interpretation with business development & new venture skill sets. Had been involved in total of 45 wells drilling campaign of both operational and well proposal with FDP, FFR, and asset acquisition experiences in Southeast Asia.

Manager, Supervisor / Technician

am a highly motivated and result-oriented Oil & Gas Professional with a demonstrated history of track record over 23 years of experience. Substantial exposure to diverse and complex operations and business environment at different levels both locally and internationally. Passionate to developing people and creating an environment for people to be at their best. Core Competencies: • Highly skilled in process safety management, operations management, efficiency improvement, strategies development, functional & Organisational excellence. • Highly experienced in upstream / midstream Production Operations at numerous levels with excellent exposure in project execution, pre-commissioning, commissioning, start-up and operation of large scale, world class facilities • A strong, collaborative team player able to influence and advise project teams on clients safety and operational expectations. • Highly experienced in Operations Readiness & Work Management/Safe Systems / Control of Work systems with an emphasis on development and continuous improvement • Track record of National Workforce Development from hands-on coaching, mentoring and assessing to Competency System Development • Experienced in harsh working conditions and multicultural environments & fully conversant with industry standards and best practices with a strong operational safety attitude. • Cope well under pressure, communicate effectively within a team environment. Excellent troubleshooting and analytic skills. Areas of Expertise / Working Facilities: • Central Control Room Operations, Production / Process Optimisation and Troubleshooting. • Wellhead Operation, Well Testing, Inlet Separation by Slug Catcher, Gas Dehydration by Molsieve & Glycol TEG. • LPG Recovery by Turbo-Expander Cryogenic Process, NGL Recovery, Sulphur Recovery SRU and Export Gas Compression. • Crude Oil Degassing Stations DGS, Crude Oil Treatment (Sour & Waxy), Dehydrators, Desalter and Export Operations. • Well Testing, Production Optimisation, Produced Water Treatment, Water Injection & Gas Lift Operation. • Piping flow lines Pigging Operations and Chemical Injection. • Amine Gas Treatment, LNG, LPG, NGL, Tank Farm Operation and Crude Oil Pumping Stations. • Power Generation, RO System, Nitrogen & IA Package,, Flare KO / ATM, LP, HP Flare & Propane Refrigeration. • Annual Plant Shut Down Preparations, Coordination and Management. • On Job Trainer OJT (On Job Training of Expat and Local Nationals). My detailed cv is attached here for your review. I hope to hear from you soon. Best Regards, Arshad Hussain I Production Operations Supervisor Eni International Zubair Oil Field Basra Iraq Pakistan: +923067488968

Superintendent, Supervisor / Technician, Engineer, Manager

Experienced Subsea Engineer with a demonstrated excellent history of works in the oil & energy industry. Skilled in Gas, Petroleum, Inspection, Professional Services, and Onshore Operations. Strong information technology professional with a Bachelor of Electrical & Electronic Engineering focused in Electrical and Systems Engineering from Nanyang Technological University.

Engineer, Supervisor / Technician

Experienced and accomplished Exploration Geophysicist with 15+ years in conventional and unconventional resource exploration. Demonstrated expertise in seismic interpretation, structural and stratigraphic mapping, and integrating geophysical data with well data to identify prospective opportunities. Skilled in designing and interpreting seismic data to produce reliable maps and attributes that drive exploration success. Collaborative leader in multidisciplinary teams, ensuring geophysical insights guide exploration, resource assessment, and operational decisions effectively.

My working in Project Chevron Pasific Indonesia, Pertamina Hulu Rokan and PT Bumi Siak Pusako. I am Supervisor Operation, Supervisor All Project and QA/QC Engineer.

Engineer, Inspector, Supervisor / Technician

More than 20 years of work experience in upstream and downstream, oil and gas industry specifically as an exploration & production (E&P) offshore facility engineer, refinery process engineering specialist, crude oil trader, and petroleum fuels retailer. Possess deep industry knowledge and competency in business development, customer relationship management (CRM), sales, marketing & trading, enterprise resource planning (ERP), supply-chain procurement & management, logistics, and, project engineering & management.

Manager, Engineer, Drafter / Designer

More than 5 Years of experience as drafter and 1 year experience as administrator of Smartplant Piping and Instrumentation Diagram software. Knowledgeable in data management and data customization within Smartplant P&ID such as create and update intelligent drawing, generate plant reports respect to requirement. Manage and create symbols, create new select list and properties as per drawing standard. Eager to explore new experiences and challenges to develop my career and personality. As an extrovert person, being a proactive, hardworking, team player, leadership and problem-solving skills may be a good match and very related to my interest to be one of the assistants that you need.

Drafter / Designer

1) Highest Qualification: B. Tech in Petrochemicals Technology/ Engineering, MBA Operation 2) Total Experience: 8 years 3) Domain:Oil & Gas, Petrochemicals and speciality Chemicals 4) Technical Expertise: Complete FEED & Detail Engineering, Simulation softwares experience like HTRI, Aspen Plus/Hysys, AFT Fathom, Pipenet, value engineering for clients for cost optimization.

Engineer

As a experienced supply chain, business and technical leader in oil and gas industry with over 20 years of experience, I have a proven track record of resolving complex issues for stakeholders and delivering industry-leading performance in various roles.   My key accomplishments include winning the 2023 Supply Chain Global Excellence Award for War on Waste leadership and motivation to team, being recognized as one of the elite group of 50 honorees worldwide. I also hold an Advanced Professional Skills in Logistics certification and am a Chartered Professional Engineer with a focus on Leadership and Management, Risk Engineering, and Chemical Engineering. I am passionate about driving innovation, efficiency, and sustainability, and I am always eager to learn new skills and technologies to enhance my performance and contribute to the success of my organization.

Superintendent, Manager

I am scheduled to conclude my training contract as a GEES in January 2025 and I am keen on exploring executive positions within your company. With a background in Human Resources I have gained valuable experience in recruitment processes managing allowances for scholars and fostering relationships with prominent accounting firms. I did a lot of event and collaborate with the other teams and did once a month event that targeted almost 300 participants of PETRONAS employee and the outsider. Due to freeze hiring in PETRONAS, I am willing to continue my Graduate Program in the other company to show my abilities and my superior can be my solid reference for my performance during in PETRONAS finance.

Other

I have 18 years experience in drilling and Workover supervisor position in oil and gas fields

I am a master mariners, specialist on LNG aspect both carrier and fsru. With more than 15 years experience on LNG projects.

Superintendent

Well-experienced in managing oil and gas project delivery for both  brownfield & greenfield, from initiation phase up to operational phase,  mainly the onshore & offshore infrastructure and process facilities,  substructure, modules, pipelines, floaters. Also well-experienced in  managing topsides major maintenance, hook up and commissioning  activities and decommissioning of onshore & offshore facilities which  essentially demands a wholesome in depth understanding and  commands a hands-on and practical know-how in managing and  delivering complex capital project Thirty-two (32) years of experience in oil and gas industries mainly on shore and offshore projects management and delivery s. Experienced in setting up a functional engineering and project delivery  department, established processes, adequate infra structures and  supports systems, meeting relevant local government statutory and  regulatory approval.  Experienced in identifying, initiating, negotiating and clinching  collaborative efforts to form strategic partnership for the purpose of  exploring potential business opportunities for mutual benefits of the  parties involved

Superintendent, Manager, Engineer, Other