Pressure Vessel freelance

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Experienced Company Reps/Engineer/Supervisor/Inspector/Auditor (QA&QC/Welding/Subsea Structure/Coating/Structure/Piping & NDT)

Inspector, Supervisor / Technician, Engineer, Superintendent

I am a mechanical engineer by education, with a wide variety of experience in offshore/subsea systems. I have spent a lot of time designing and building offshore/subsea systems, but I have also spent a lot of time in the field installing and testing them, so I am comfortable in both situations--and ideally in a role that bridges both.

Engineer

SUMMARY – Engineering Experience and Expertise Simon is a Chartered Engineer specialising in chemical and process engineering. He has extensive experience throughout the world on high-profile projects with experience in project development as well as design through to commissioning. He provides expert advice and technical assessments to government agencies and energy companies. Simon has extensive experience in a career spanning over 38 years. He works in the process industries, mainly but not exclusively in oil and gas, with experience on projects from feasibility and concept studies through to commissioning and operation. He has strong experience and expertise in engineering and design of offshore and onshore projects. He has expertise in oil production and processing including production and flow assurance, material selection and corrosion, oil/ gas/ water 3 phase separation, oil stabilisation, oil dehydration, pumping, metering, pipelines. He has expertise in gas processing that includes gas dehydration, gas sweetening, mercury removal, cryogenic gas dewpointing, gas compression, and utilities such as fuel oil and fuel gas treatment. He has good knowledge of offshore fixed, subsea, and floating structures used in field development such as FPSO, FSO, jacket, spar, TLP, and risers as required for shallow water, deep water, and ultra-deep water fields. He has good knowledge of Flow Assurance and experience with a variety of fluids including sour oil and gas, heavy oil, waxy, emulsifying oil and HPHT. He is familiar with many national and international regulations, recommended practices, codes, and standards. He has good experience of cost estimating as well as economic assessment during concept selection and operational asset reviews. He has specialised computer software skills with cost estimating software such as QUE$TOR. This includes preliminary project schedules and cost phasing. He also has experience of asset valuation during Acquisition and Disposal and limited experience of portfolio modelling. He has also assessed the value of information from proposed appraisal drilling. He is experienced in the application of project development procedures such as opportunity framing and stage-gate peer reviews and has experience of value engineering, the management of studies and small teams. He has worked on FEED studies and detailed design projects as well as plant commissioning and start-up. Simon can prepare and deliver presentations to a variety of audiences and has some good technical report writing skills. He has a good understanding of geoscience, reservoir, production, and well engineering in field development as well as other surface engineering disciplines such as mechanical and piping encountered in production process facilities.

Engineer, Manager

Having 14 years of experience in For Refinery(RCC Pertamina RU VI), Power Plant(Coal Fired Suge Belitung, Mobile Power Plant Banda Aceh), Petrochemical(Sriwijaya Fertilizer, Banggai Amonia Plant), Geothermal (Lahendong Geothermal), FPSO(Feed Inpex Masela FPSO,Inpex Ichthys FPSO, FPSO Petronas 1), Well Head Platform(Tutung Platfotm, OO-OX Platform), LNG Plant(Donggi Senoro LNG,FEED Malaysia LNG Train 9) projects in FEED, detailed engineering design and construction support, as Senior, and Engineer in Mechanical Static and Piping Pipeline Engineering design (Offshore and Onshore Project) Pre-Service, and In-Service (Greenfield and Brownfield), with a variety of projects in Oil and Gas Industry. Experience working with National and Multinational Company for Oil and Gas Company (Client-side), EPCI company (Contractor) and Engineering Consultant Company. Mechanical Piping engineering expertise/experience includes the following: •        Piping Stress Analysis and Piping Material of fixed offshore platform, and Floating Offshore ,Refinery, Power Plant,Pertochemical and Geothermal, LNG Plant for feasibility study, conceptual, basic engineering, FEED, detailed design, and EPC/EPCM projects. •        Mechanical Engineer For Static Equipment(Pressure Vessel, Pig receiver, Reactor, Flare Stack, Regenerator, Orifice Chamber,etc), Rotating Equipment (Pump, Compressor, Turbine), Package Equipment(CO2 Snuffing Package, N2 Package, Crude Oil Crude Oil Stabilization Package, Dilution Water Package, Produced Water Treatment Package, Chemical Injection Package) •        Experience in detail engineering and EPC project for mechanical and piping analyses of offshore structure (jackets and topsides) for Green Field and Brown Field Project during in-service and pre-service conditions such as in-place analysis, seismic analysis, fatigue analysis, lifting analysis, load-out analysis, and transportation/tow analysis. Detail design through local checks that covered connections, supports member strengthening, plate design, etc. Review of Design Drawings and Shop Drawing and coordinate interdisciplinary engineer tasks in the detail engineering stage. •        Reviewed, provided necessary recommendations, and approved EPC Contractor both offshore and onshore Greenfield and Brownfield Mechanical Piping engineering-related deliverables (Calculation, Drawings, and 3D Model). Providing and consolidating Company comments for the associated discipline in respect to the detailed design of onshore and offshore for Pre-service & in-service analysis, Pipe supports, Equipment supports, foundations, etc., during the EPC phase to ensure the Offshore Platform scope of supply is engineered, designed, and integrated to the overall project design and is consistent with project requirements. •        Prepared Material Take-Off (MTO) and Preparation of RFQ (Request for Quotation) and Technical Bid Evaluation (TBE), Commercial bid evaluation, clarification, reviewing vendor documents, and selecting qualified subcontractor at Procurement stage for Piping material. •        Attended Regular Internal, External, and Kick of Meeting (KOM), HAZID and HAZOP meetings, construction review meetings, coordination, and technical meetings with the internal project team, vendor, and subcontractor. •        Has strongly knowledge in the engineering/design, especially the piping material selection, piping components, pipe support, stress analysis, corrosion/erosion, painting, welding, QA/QC, construction, PDMS and piping codes & standards •        Familiar with piping design code and standard and related software e.g. Caesar •        Extensive experience in detailed equipment layout design, 3D model review incorporating piping design, operation and maintenance requirement. •        Experienced in engineering, fabrication, pre-commissioning and commissioning of piping component. •        Experienced in high H2S and high CO2 gas contents including the design of CRA material i.e. Inconel,Alloy •        Experienced in high temperature / high pressure (HPHT) facilities •        Having knowledge Carbon Capture Storage Utilities (CCSU) technology. Main Equipment of Carbon Capture Storage Utilities (CCSU) technology are Compressor,CO2 absorber, Coolers, Pulsation dampers and Diaphragm pump

Engineer

Able to take any challenges, able to work in various culture and environmental, self-motivated person, able to make a rational decision with limit of authority, hardworking, responsible and supportive to team member.

Drafter / Designer

WITH 30YRS AS COMMISSIONING AND START UP ENGINEER MAINLY IN LNG PLANTS OVERSEAS, 8YRS IN LIBYA LNG, 8YRS IN NIGERIA WITH SHELL LNG INCLUDING COMMISSIONING AND OPERATIONG 4 NEW LNG PLANTS INCLUDING ALL ASSOCIATED UTILITIES, LNG SHIP LOADING, CONDENSATE LOADING, GAS EXPORT COMPRESSORS,ALSO IMPLEMENT ELECTRONIC PTW SYSTEMS, INVOLVED WITH ALL CONSTRUTION MANAGEMENT TEAMS. AND NUMEROUS LNG PROJECTS WORLD WIDE AS COMMISSIONING ENGINEER/MANAGER

Engineer

A highly motivated individual with great ambition to progress my career within 3D modelling & Engineering as part of a professional organization. I am a very dedicated hard working individual who is keep to learn. I take pride in my work and I am very conscientious. OBJECTIVE To obtain a challenging position with a growing company that will provide an opportunity to utilized my knowledge of Computer Aided Drafting /design continuing my personal growth where my positive attitude, integrity and strong desire to succeed will contribute to the company's success.

Drafter / Designer

I am an experienced FEA Engineer with over 10 years of expertise in the offshore, subsea and marine industry. My career has been dedicated to solving complex engineering challenges using advanced simulation techniques, primarily leveraging ANSYS software. I specialize in structural analysis and design, linear and nonlinear analyses, fatigue assessment, lifting analysis and various other analyses. With a strong foundation in engineering principles and a proven ability to deliver accurate and reliable analyses, I am passionate about optimizing designs to enhance safety, efficiency, and performance in demanding environments. My hands-on experience with industry standards and collaborative approach to problem-solving make me a valuable contributor to multidisciplinary teams. I am now seeking an opportunity to bring my skills and experience to a dynamic organization, where I can continue to advance innovative engineering solutions for the offshore and marine sector.

Engineer