Start Up freelance

* Total experience in the Oil and Gas Industry is more than 24 years, with details of 6 years in the field of oil refinery operations, and 18 years in the field of processing facility design (consisting of 15 years onshore and 3 years offshore) both in Indonesia and abroad (Sultanate of Oman and Brunei Darussalam) * Extensive experience in Concepts, FEED (Front End Engineering Design), DD (Detailed Design) for onshore/offshore processing facilities, refinery operations (Crude Oil Distillation Unit, Naphtha Hydro Treating Unit and Catalytic Reforming Unit) and also start-up & commissioning. * Experience in process studies (flow assurance study, dispersion study, etc.) and proficient in several process simulation software (HYSYS/UniSim, Shell FRED, FLARESIM, PIPESIM and OLGA).

Engineer

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Having more than 17 years of experience in EPC Company as process & commissioning/startup engineer, executing various projects in energy sector (oil refinery, gas processing, gas pipeline, LPG facility), petrochemical, lubricant, waste water treatment plant, green field & brown field.   Responsible for Front End Engineering Design (FEED), bidding phase, Detail Engineering, construction phase, precommissioning, commissioning, start-up, performance test.

Engineer, Manager

Dedicated and focused Senior Mechanical Technician with extensive expertise in mechanical maintenance and work preparation in the oil and gas sector. Seeking a challenging role where to supervise and coordinate mechanical tasks and preparing work procedures will contribute to optimizing operations and maintaining equipment reliability.

Supervisor / Technician

Luis Antonio, is a motivated, energetic, accomplished professional with extensive experience in the upstream oil and gas: Drilling, Workover, Completion, P&A Wells Projects and Decommissioning Well Operations as well. Determined and Decisive; Uses Initiative to Develop Effective Solutions to Problems and Provide Technical Support to Resolve Challenges of the Well Engineering Planning-Design, and Rig/Well-Site Operational Support. Results-Driven, Logical and Methodical Approach to

Engineer

This is to hereby submit my candidature, against the existing "Snr. Process Engineer" role. Kindly note that I hold a Bachelors of Engineering (B.E) chemical engineering degree , and I am experienced (17+ years) in natural gas sweetening/ dehydration, compression, LPG /NGL Recovery / oil stabilization, petrochemical, and plastic (PET resin) manufacturing plants' process design (Basic/ FEED and detailed engineering), project execution/pre-mechanical completions checking, pre-commissioning, commissioning, startup and operations. I am skilled at; 1. Process design (Conceiving of the Simulations; HMB, Hydraulics Studies, Equipment Sizing, Design documents and Manuals etc)  2. Pre-commissioning, commissioning and startup as well as the Process operations of; a) Petrochemical b) Plastic resin production c) Natural gas processing (sweetening, dehydration and LPG recovery), d) oil handling, multiphase flowlines and separation e) Gathering and dispatch systems & metering. f) Crude oil, LPG storage, metering and dispatch systems. g) OSBL/ Process utilities including Flare, Firewater network,Fuel gas, I/A & N2, P/W etc 3. Process and Operational Safety  4. Project execution/ Interfacing. Moreover, I am well versed in process plant design documents such as the PFDs, P&IDs, C&E matrix, Philosophies, Data sheets, Manuals. I have generated and been a part of the teams that developed SOPs I have been scribe and part of the several Safety studies (HAZID, HAZOP,SIL) I have working experience with applicable national and international codes & standards including but not limited to APIs, ASME, NFPA etc. I am a steadfast team player and also I would come handy in prolonged field assignments and different locations as well. Further to above please note that from Aug 01st, I am immediately available to join

I work as Chief Rig Mechanic With 15 years of experience working in all stages of oil and gas field evaluation and development, their goal is to search for hydrocarbons in the most effective way and solve any operational problems. I can also be responsible for using drilling tools and techniques and getting the most out of old or poorly performing wells during the entire extraction process. It also reduces the impact of drilling on the environment and ensures compliance with environmental protection laws

Aeronautical Engineer and brazilian entrepreneur, I'm looking for opportunies for my company to work with engineer not only in Brazil but also abroad. Passionate about new technologies, Airplanes and Energy transition, I'm eager to help your company accomplish your main tasks. Looking forward to hearing from you! Best regards, Abner.

WITH 30YRS AS COMMISSIONING AND START UP ENGINEER MAINLY IN LNG PLANTS OVERSEAS, 8YRS IN LIBYA LNG, 8YRS IN NIGERIA WITH SHELL LNG INCLUDING COMMISSIONING AND OPERATIONG 4 NEW LNG PLANTS INCLUDING ALL ASSOCIATED UTILITIES, LNG SHIP LOADING, CONDENSATE LOADING, GAS EXPORT COMPRESSORS,ALSO IMPLEMENT ELECTRONIC PTW SYSTEMS, INVOLVED WITH ALL CONSTRUTION MANAGEMENT TEAMS. AND NUMEROUS LNG PROJECTS WORLD WIDE AS COMMISSIONING ENGINEER/MANAGER

Engineer

Good Day !     Please refer my resume for the above mentioned position, I have great experience and knowledge on oil and gas Upstream Operations. Total Experience - 13.8 Years Plant & Equipment Handling - Wellhead, crude stabilization unit, Vapour recovery unit, Single,FPSO operation, offshore upstream production development,two and multi stage gas compressor, barge Loading and monitoring,Water treatment plant(CPI,IGF,NSF), HDPU,Tank Farm, molecular sieve dryer, Slug catcher,Three-phase separator, water/Gas injection, Artificial lifting,SRP or Beam pump,Booster Compressor, Exchangers, Chiller, Fin-fan cooler, Pumps,Scrubber, Integrated water bath heater, IAC Compressor, Glycol dehydration unit, LPG and LNG operations, DCS,SCADA,Pigging, Hot Tapping, Startup and shutdown activities, well testing / integrity / Slickline/ Coil tubing coordination, Safety critical equipments, safety equipment Weekly/Monthly test run,, P&ID Marking, etc. Documents Handling- LOG SHEET PREPARATION,PTW,SOP PREPARATION, MOC INITIATIVE, DAILY REPORT PREPARATION, WELL DATA MANAGEMENT, FRONT LINE MAINTENANCE, SAP,PROCESS SAFETY MANAGEMENT, FIELD CHECK LISTS MAINTAINING, SAFETY EQUIPMENT AND PLANT EQUIPMENT STATUS RECORDS, ETC. Thanks & Regards Mohamedigbal Abdulrazack  +919003510026(india) +2347057791089(Nigeria)

Superintendent, Manager

Profile: An experienced Subsea Controls Lead Engineer, currently responsible for the design, build, testing and delivery of a new state of the art in-riser control system. Other experience includes successfully delivering the FEED, design engineering, testing, commissioning, and start up of the Subsea Control System for Total's 70 well, 20 manifold deep-water Kaombo project. Chartered Engineering qualified (CEng) with over 8 years' experience that has covered all stages of major projects, including leadership and management responsibilities. To complement this diverse wealth of experience is a 1st Class Engineering Master's Degree with Honours, obtained from the highly prestigious University of Glasgow. A well-rounded Professional Engineer with charisma and passion that becomes infectious to others. Obtains a natural ability to read difficult situations quickly which has been a formidable skill when leading a team and developing fellow colleagues. Ensures a high focus on Client requirements as well as timely results, always adhering to HSE and others well-being.

Engineer

Top-performing Project Logistics and Materials Professional with 32 years industry experience, diverse and flexible experience in Green and Brownfield International Frontier locations on and off-shore, leading project teams & Contractors through diligent Site Safety Leadership during:   ·       Setting up of In-Country Infrastructure, Supply Bases, Fabrication Facilities in remote locations ·       The Fabrication, Installation and Commissioning of SPS/SURF developments in Ultra Deep Water ·       FPSO Shipyard preparedness and Sail away through to HUC ·       LNG construction from early works to commissioning and systems handover. ·       Experienced in Off-shore Installation operations on Pipelay vessels, MPCV’s and Cable Laying ·       Decommissioning and Recycling of recovered Subsea Infrastructure   16 years of Major Operator experience, excellent Contractor performance management. A collaborative communicator focused on building relationships. Owning the scope, building team morale, having a bias for action, spotting trends through data analysis and acting on them

Chief Mechanic / Maintenance Supervisor with 20+ years' offshore and onshore experience across Southeast Asia, Russia, Turkmenistan, Australia, and the Middle East. * Led shipyard commissioning and mechanical construction projects (Letourneau 116 Jack Ups) from build supervision to operational handover. * Maintained NOV TDS top drives, Letourneau draw works, Caterpillar 3512C/3516C engines, mud systems, hydraulics, pneumatics, ballast, bilge, and BOP systems. * Managed preventive maintenance programs, API-standard overhauls, and SAP/AMOS-based maintenance systems. * Supervised multinational crews across mechanical, electrical, hydraulic, and welding teams in high-pressure environments. * Delivered equipment reliability improvements, minimized downtime, and consistently met safety and operational targets. * Communicated across drilling, marine, and project management departments to align maintenance strategies with operational goals. Available for offshore, shipyard, or commissioning projects requiring strong mechanical leadership, technical knowledge, and a safety-first approach.

Inspector, Superintendent, Supervisor / Technician

Innovative and results-driven Project Manager with over 10 years of experience in oil and gas production, Process Optimization, Hydrocarbon Allocation, Chemical Engineering, Upstream and Midstream chemical technical support. Improvement focused expert in flow assurance support, integrity management. Skilled in delivering measurable outcomes through frameworks like OKRs and QBRs, I thrive in fast-paced/Agile environments by driving efficiency, fostering collaboration, and aligning projects with company objectives. Adept at leading cross-functional teams and solving complex challenges, I bring expertise in cost reduction, sustainability, and HSE compliance.

I have extensive experience in oil & gas, manufacturing industry setting which include both production and maintenance. I am well versed and versatile in both the operation of production and equipment repair, installation and troubleshooting. Basic understanding of Quality Management System ISO9001

Supervisor / Technician

Degree - Executive Bachelor in Industrial Engineering Technology (Mechanical & Maintenance), Diploma in Engineering Technology in Mechanical & Maintenance with More than 23 years of OIL & GAS hands-on experience in the varies Project in oil and gas Green/Brown Field, EPCC, EPCC+I, TOPSITE, SUBSEA and Pipeline Coating and Installation. Entrusted to handle and manage important role in overall project package and organization itself. Proven capability to lead in coordinating and managing from initiation stage Engineering (Detail Engineering), Procurement, Pre-fabrication and Construction onshore, offshore installation (Hook-up and Commissioning) and Handover to operation (asset owner). Task project and operation execution, strong thinker and highly motivated. Good in communication skill, exceptional work ethics and discipline, and good understanding on organization, relationship building and HSE. Involving in Inspection Engineering Technical, Quality Control Inspection and Assurance, Coating/Painting Subsea, Pipeline and Upstream, Material Coordination and Management, Project Expediting & Procurement, Heavy Structural Fabrication Installation, Pipeline Coating and Installation, Fabrication/modification Piping and Vessel maintenance/Integrity, Hook Up/Commissioning and Logistic. Ensure all Critical inspection or activities in accordance to applicable written standard, Codes and procedure and Comply with HSE. Conversant with the International Codes and Standard (ASME / AWS /ANSI / ASNT / API / ASTM / BS / ISO Quality Procedures).

Inspector, Superintendent, Engineer, Manager, Other

Emergency medical experts

Other

Led operations and business initiatives for world-class organizations like ICI, OMV, Shell, BP, and SLB, driving efficiency and maximizing asset performance across multiple geographies. • Served as SD2 Project Operations Manager for BP, managing a $28 billion Shah Deniz 2 project, ensuring successful commissioning, start-up, and seamless transition to operations. • Delivered strategic leadership across multi-billion-dollar projects, focusing on operational excellence, risk management, and business transformation in the oil, gas, and petrochemical sectors. • Holds a Bachelor degree in Electronic Engineering (Pakistan) & PgCert in Risk & Safety Management (UK).

Im an Mechanical Engineer with 30 years of upstream experience

Manager, Superintendent