Rotating freelance

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Dynamic and accomplished chemical engineer with a wealth of industry experience, adept at navigating complex  challenges with poise and strategic logic. Proven track record in orchestrating multiple competing tasks to ensure  seamless project execution from conceptualization to completion. A progressive, technically-savvy leader with a  keen analytical mindset, dedicated to driving continuous process and procedural improvements that enhance  outcomes and align with organizational strategic goals.   Expert in cost and budget control, consistently delivering projects within financial constraints while maximizing  efficiency and value. Known for a collaborative approach to building and managing business relationships, adept at  resolving issues, translating complex information clearly, and fostering strong rapport across all levels, both  internally and externally, in traditional and remote distributed environments. 

Engineer, Manager, Translator

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Mechanical engineer experienced in maintenance, inspection, training and designing fields of fluid power systems, lifting, static and rotating equipment. Passionate in 3D designing, additive manufacturing, rapid prototyping, and simulation analysis. Attained the NCEES FE mechanical exam pass and eager to obtain the professional licensure.

Engineer, Drafter / Designer

● Mechanical equipment, process engineering and material handling equipment knowledge. ● Total 15 years of working experience in engineering of mechanical equipment for offshore platform Oil and Gas industries, FPSO Topside equipment and Power plant industry. ● Experience work together with commercial team, QA/QC team, logistic and construction engineer in EPCC company. ● Working experience inclusive of FEED, Pre-bid engineering, and detail engineering. ● Attend Factory Acceptance Test. ● To reply Site technical query or provide support at site if required. ● Equipment knowledge covering static, rotating and packaged equipment e.g., Gas turbine driven equipment, pumps, lifesaving appliances, screw compressor, filters, packaged equipment etc. ● Experience of dealing with many EPC Contractors and equipment Vendors. ● Familiar with International Codes and Standards and wide range of client's specification, ● Knowledgeable in interdisciplinary activities for the integration of packages / equipment. ● Experience working with global team.

Engineer

EXPERIENCE : HAVING 12 YEARS OF EXPERIENCE IN INDUSTRIAL FIELD, WELDING, QUALITY CONTROL (QC), MECHANICAL & PIPING TESTING, FACTORY ACCEPTANCE TEST (FAT) INSPECTION & COMMISIONNING, TURNAROUND IN OIL & GAS (ONSHORE & OFFSHORE), POWER PLANT, SHIPBUILDING CONSTRUCTION PROJECT AS PROJECT COORDINATOR, MECHANICAL & PIPING INSPECTOR, QC SUPERVISOR/COORDINATOR AND QA/QC ENGINEER.

Engineer, Inspector

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

I am a person having experienced in construction management, mechanical, piping, fabrication professional working with large construction teams with a career spanning over fifteen years in the energy sector, power plant, refinery, and mining. Proven track record in leading large contractor teams and delivering on billion dollar complex construction projects from conception right through to commissioning and operational handover. Hands on, Fast action, Persistence,Resilience and Agile in handling many cases for achieving company’s goal.

Engineer, Superintendent, Manager

Experienced Heavy Equipment Maintenance with a demonstrated history of working in the retail, forestry, mining, construction and power power plant industries. Skilled in preventive & corrective maintenance and have skill on transfered knowladges as mechanical trainer.

Engineer, Inspector, Other, Supervisor / Technician

Detail-oriented Mechanical Engineering graduate with 2 years of experience in the oil and gas industry, specializing in Asset Reliability, Availability, and Maintainability. Proven track record of contributing to Turnaround and Inspection teams, with hands-on involvement in asset integrity, corrosion management, and regulatory compliance. Strong technical skills, paired with a problem-solving and analytical mindset, allow for effective decision-making in fast-paced environments. Passionate about continuous learning and eager to contribute to dynamic engineering teams that drive operational excellence.

Engineer

1. Qatar Gas 2. Aramco 3. NPCC 4. MCDERMOTT

Supervisor / Technician, Engineer

●Engineered/Constructed/Commissioned 250+projects worldwide: 150+ small $1-$10 million; 75 medium $10-$99 million; 16 large $100-$900 million; & 10 mega-projects of $1 to $24 billion. ●Successfully Managed – Up to 30 concurrent projects. ●Licensed Professional Engineer: California & Alaska, can be licensed anywhere worldwide by comity. ●Education: BSME from University of California, Berkeley (always in the top 5, worldwide). ●Upstream Oil & Gas: 36 Oil & Gas Production / Separation / Reinjection / Shipping Facilities; Sealift modules to 2,600T/2320mT; 100s of Drillsites / Truckable Modules to 40T/36mT; 4000mi/6400km of Gathering / Injection Lines up to 60”/1500mm x 740psig/50barg and 24”/600mm x 3,280psig/221barg. ●Midstream Oil & Gas: 18,260mi / 29,216km of Transport Pipelines. Diameters to 60” / 1.5m & pressures to 5230psig / 361barg. Largest: 48” / 1.2m x 1180psig / 80barg x 800mi / 1280km and 40” / 1m x 1480psig / 100barg x 2400mi / 4000km (onshore, offshore, oil, gas, products, CO2, batching, spiking, conversions, reversals)., 75 Pump Stations; 45 Compressor Stations; 100+ Meter Stations; 3 underground gas storage plants; 11 major Terminals (marine, pipeline, railroad, truck, piers, loading arms, AFFF, recycle pipelines, fixed & floating roof tanks to 500,000bbl / 60,000cm, gas storage bullets and spheres). ●Downstream Oil & Gas: 6 Refineries (including 2 majors $3.5B & $1.5B; 30 concurrent turnaround projects), 1 Gas Plant; 20 retail gasoline / diesel / lubricant / LPG stations; 4 distribution centers. ●BU Power Plants Combined-Cycle CoGeneration: 40 to 50 MWe backup power plants as part of larger projects. ●BU Power Plants Diesel: 150+ 0.25 to 4.5 MWe backup power / remote main power plants as part of larger projects. ●Power Plants Solar: 300+ 0.25 to 2.5 MWe off-grid valve & meter station power as part of larger projects.

Manager

I have 17 years experience in fabrication. Can execute inspection activity base on clients specifications. Monitoring and supervised all fabrication activity according with project procedure. Prepared and compile all related documents on every stage of inspection activity.

Inspector, Supervisor / Technician

I have over 30 years of experience in brown and green field development, FPSOs, flow assurance and water treatment

Engineer

·       Professional Technologist, (Ts, Oil and Gas) by MBOT, Certified Offshore Crane Inspector API RP 2D, LEEA Appointed Person for Lifting, Vibration Analyst CAT I, Registered under Board of Engineers Malaysia. ·       Total of 18 years professional experience in Oil and Gas operating company as Staff Engineer, Sr Engineer (Root Cause Analysis/Defect Elimination, and Mechanical Team Lead. ·       Technical Authority for Lifting and Lifting equipment, HVAC, and mechanical packages under Technical Services Team. ·       Experienced in vast variety of equipment & troubleshooting (Rotating & Static), Facilitate and Lead Root Cause Analysis & Defect Elimination tasks.  ·       Experienced in developing maintenance plans, maintenance strategy, SCE verification/audit, equipment  life cycle analysis, spare part & contracts management. Strong knowledge of CMMS system (SAP) ·       Excellent ability to manage and coordinate vendor/contractor to perform maintenance, installation and commissioning activity.  ·       Collaborate with various discipline engineers, managers and vendors to assess the maintenance needs of equipment and prioritize tasks based on urgency, availability of parts, and production schedules

Engineer, Manager, Superintendent

PT. Pertamina

Drafter / Designer, Engineer, Inspector, Manager, Other, Supervisor / Technician

I have 3 years of experience in the industrial sector, mainly in mechanical engineering, quality control, and risk management. I spent 1 year as a Mechanical Engineer on a 5000 MTPD methanol plant project, focused on the installation of static and rotating equipment, including major packages like the Waste Heat Recovery System and Air Separation Unit. I then worked as a QC Mechanical Inspector on the same plant, ensuring equipment met all quality standards before startup. Currently, I work in risk management, supporting the client in developing an enterprise risk framework, policy, and risk register. While this has given me valuable insight into project risks and strategic planning, I’m now looking to return to a technical engineering role where I can apply my hands-on experience and continue growing in the field.

Engineer

Having more than 14 years of relevant experience at Manufacturing, Fabrication and Oil & Gas Industries as Quality  control, Engineering and Construction. Projects such as Module Yard LNG Construction, FPSO Topside Platform, Central Process  Platform, Well Head Platform, Jacket Topsides, Refinery-Pipe rack, Bridges and Spools Fabrication. Worked for various roles in  Piping disciplines (Production, Field/Site Construction, Material) Maintenance, HOF (Hot Oil Flushing) Bolting & Flange  Management (Joint Integrity Inspection), Testing (Hydro test, Pneumatic Test), Purging & GALT (Gross Air Leak Test), Pipeline  Process, Pre-Commissioning and Process Mechanical Commissioning) and phases including interfacing with Engineering, QAQC,  Procurement, Safety, Commissioning, Sub-Contractor and Company. Proven ability to advise, manage and complete the projects to  the highest standard with a meticulous attention to detail with agreed deadline. 

Engineer, Superintendent, Supervisor / Technician

Mechanical Background 21 years Hands on experience in Static/Rotating Eqpt Maintenance, Projects, commissioning,

Engineer, Superintendent

Certified Project Management Professional with 18+ years of experience managing large EPCM/EPCI projects in mechanical engineering for the Oil & Gas industry (offshore and onshore), as well as in marine and shipbuilding projects. Adept at leading multi-disciplinary teams to deliver projects safely, on time, and within budget.

Engineer, Manager