·      Forty-three years in the Safety, Industrial & Petroleum Industry. [February 1979-Present]   ·      Sixteen years as the Senior Canadian [Newfoundland] Government OH&S Officer for the offshore drilling industry, service companies and industrial onshore sites.   ·      Twenty-one years overseas experience in hostile and harsh/ hostile environments in safety and training.   ·      Work & Regulatory experience on Semi-Submersibles / Jack-ups / DP ships / Barges / Tenders / Pipe Lay Vessels/ Production Platforms/ Land Drilling and Work Over operations.   ·      Safety Specialist/Manager for the Government of Saudi Arabia in Al-Jubal, K.S.A.   ·      Senior HSE Manager for Nabors Drilling International in Dhahran, Saudi Arabia.   ·      Senior HSE Advisor & HSE Manager for Pride International in Chad, Africa.   ·      PHSE Manager - Project Management Team for National Petroleum Construction Company in Abu Dhabi, U.A.E.   ·      PHSE Engineer - Project Management Team for Eni Iran BV in Darquain, Iran.   ·      PHSE Manager - Project Management Team for Angola Drilling Company in Luanda, Angola.   ·      Drilling Standards Safety Specialist for Brunei Shell Petroleum [BSP] in Darussalam, Brunei.   ·      Safety Engineer for Sonangol P&P in Luanda, Angola & Accra, Ghana.   ·      Senior HSE Advisor for Petro Canada in Tripoli, Libya.   ·      HSE Advisor for Flint Energy Services Ltd.  in Ft. McMurray, Alberta   ·      Senior HSE Advisor for Genel Energy International in Dahuk, Iraq   ·      Senior HSE Advisor for Sterling Energy International Ltd. in Sulaymaniyah, Iraq   ·      HSE Advisor for Onyx International Inc. in Saskatchewan, Canada ·      Senior HSSE Advisor with BP/ Rumaila Operating Organization [ROO] in Basra, Iraq.   ·      Drilling EHS Operations Team Lead for Tullow Oil in Accra, Ghana.   ·      Safety Training Coordinator for Smedvig Asia in Pointe Noire, Congo.   ·      Senior Consultant with National Safety Consultants Co. Inc. [1983-1988]   ·      Owner & Senior Consultant with World Wide Safety Co. [1996 – Present]   ·      President S & D Communications Ltd. [1988]   ·      Certified Competent Toastmaster [CTM] from Toastmasters International. [1990]   ·      Canadian Registered Safety Professional – CRSP [1989]   ·      Safety Degrees from the United Nations thru World Safety Organization [WSO] with two specialties as below.   ·      Certified Safety and Security Director – CSSD [1986]   ·      Certified Safety Executive – CSE [1986]   ·      Certified Safety Manager – CSM [1986]   ·      Certified Safety Specialist in "Occupational Health & Safety" [CSS OHS] [2002]   ·      Certified Safety Specialist in "Oil Well Drilling and Systems" – CSS [OWD&S] [2002]   ·      Certified Professional Manager – P. Mgr. [2007]   ·      Police Trained Professional Accident Investigator – RCMP & RNC [1980’s]   ·      Assisted in Investigation of the Ocean Ranger rig sinking disaster – [1982 – 1984].   ·      Government OHS Officer for the fabrication of the Hibernia GBS platform for offshore Eastern Canada.   ·       Countries worked – Canada/ Egypt/ Saudi Arabia/ Chad/ U.A.E/ Iran/ Angola/ Algeria/ Congo/ Ghana/ Libya/ Thailand/ Kurdistan/ Iraq and Brunei.   ·      International Membership in the Association for Canadian Registered Safety Professionals [1984].   ·      International Member in World Safety Organization - United Nations [1986].   ·      Member International Institute Risk & Safety Management [2012]   ·      Member Association for Canadian Registered Safety Professionals [1989]   ·      Government representative on Board of Directors “Safety Engineering Technology” Program for Memorial University of Newfoundland - Marine Institute of Canada [1984-1986].   ·      Refer " LinkedIn" professional profile –   https://www.linkedin.com/in/david-russell-crsp-cssd-cse-csm-css-ohs-owds-ctm-86a62a1b0/

Manager, Superintendent, Inspector

More than 12 years’ experience in Oil & Gas, Manufacturing Heavy Equipment, and Power Plant fabrication. Qualified Welding Inspector CSWIP 3.2, CSWIP 3.1 and CSWIP 3.0 certified by TWI Certification. ASNT Level II NDT Inspection is certified by the Offshore Technology Institute (OTI). Qualified Painting inspector certified by Lapis Baja Inspektindo. Qualified for Installation and Assembling of Small GRP Pipe and Fitting certified by ORI Group. Demonstrates strong attention to detail in inspection weld quality. Comes with a Bachelor of Mechanical Engineering degree. Having experience to develop QC procedure base on Client Specification, Project Specification, Code and Standard applicable (AWS, ASME, MOTS, API, ISO, DNV). Undertaken Projects covering a wide range of Oil & Gas structures, Pipe Rack foundations, Substation module, Well Head and Riser Platforms, Accommodation Platform, Process Platform, FPSO modules, and Power Plant.

Inspector, Supervisor / Technician, Other

Hello, how are you? I would like to share a bit about my professional background, which I consider highly valuable. Since graduating, I have gained extensive experience working with various companies across the contractor, consultancy, shipyard, and oil & gas sectors, covering areas such as engineering, procurement, construction, and management (EPCM). With over five years of experience as a Procurement Engineer, I have contributed to multiple diverse projects in organizations that value diversity, equity, and inclusion. I am always eager to take on new challenges and explore opportunities in engineering, procurement, and other technical roles

Engineer, Drafter / Designer, Other, Superintendent, Supervisor / Technician, Manager, Inspector

I am a highly skilled and dedicated Construction Supervisor and Welding Inspector with over 10 years of experience in the oil and gas and energy industry. Throughout my career, I have successfully managed numerous construction projects from start to finish, ensuring they are completed on time, within budget, and to the highest quality and safety standards. As a Construction Supervisor I have a strong background in leading cross-functional teams and coordinating with designers, engineers, contractors, subcontractors, and stakeholders to ensure the seamless execution of projects. My exceptional organizational and problem-solving skills have enabled me to effectively handle complex construction challenges, making timely adjustments and implementing innovative solutions when necessary. As a Welding/QaQc Inspector certified by CSWIP 3.1, with in-depth understanding of API 1104, AWS D1.1, ASME (B31.3, B31.1, Section II, V and IX) and PTS (Petronas Technical Specification) to ensure fabrication and inspection comply with these industry code and specifications. In additional, I possess strong skills in interpreting various technical documents to the welding process and mechanical testing, including isometrics drawings, shop drawings and blueprints. I excel in understanding and deciphering these documents and ensuring that welding procedures and specifications align with the provided schematics.  With a keen eye for detail and a commitment to safety, I have consistently delivered projects that exceed client expectations while adhering to strict regulatory requirements. I am constantly seeking opportunities to stay updated on the latest industry trends and technologies, allowing me to incorporate innovative practices into my work. In summary, my extensive experience in construction management, combined with my strong leadership, problem-solving, and communication skills, make me a valuable asset in successfully managing construction projects. I am passionate about delivering excellence, and I thrive in challenging and dynamic environments.  

Inspector, Supervisor / Technician

Oil & Gas/Petrochemical professional with over 20 yrs of experience maintaining complex and hazardous industrial facilities & plants and leading large multinational & multidisciplinary teams. Resourceful team player capable of making independent decisions in challenging and stressful situations, always ready to take initiative and leadership when required. Life motto: keep it simple and efficient as possible, but safety always comes 1st!!!

Superintendent

Electrical & Instrumentation Engineer with experience in detailed engineering work, material requisition, and coordination for construction and installation activities. Proficient in ETAP, AutoCAD, Dialux Evo, and PLC programming for Omron, Siemens, and Mitsubishi.

Engineer

Dear Hiring Manager,   I am writing to express my interest in the current position at your company. With over 9 years of experience in project engineering and client relationship management within the oil and gas and marine sectors, I am excited about the opportunity to contribute my skills and expertise to your esteemed company.   In my current role as a Project Engineer at ADC Energy Ltd, I have successfully driven sales initiatives that resulted in substantial revenue growth and increased market share. My strong technical background, coupled with my ability to build and maintain client relationships, has enabled me to identify and capitalize on emerging market trends and opportunities. I am adept at conducting thorough market analysis, developing strategic sales plans, and delivering customized solutions that address clients' needs.   My experience at Pronal Sdn Bhd has further solidified my proficiency in managing complex sales cycles and leading cross-functional teams to achieve project objectives. By fostering collaborative relationships with stakeholders and delivering on promises, I have consistently exceeded sales targets and contributed to overall business growth. My commitment to understanding customer pain points has allowed me to tailor solutions that not only meet but exceed expectations, enhancing customer satisfaction and loyalty.   Holding an MBA in General Management and a degree in Electrical & Electronics Engineering, I bring a unique blend of technical knowledge and sales acumen to the table. I am eager to leverage my expertise in the marine industry to help your company achieve its sales objectives and enhance its market presence.   Thank you for considering my application for the position. I look forward to the opportunity to discuss how my experience and vision align with the goals of your team. I am available for an interview at your earliest convenience.   Sincerely,   Ahmed Mukhtar

Engineer

The most potential in Quality Health Safety and Environment position starting with Field Executor until Management which have direct roles to the operation of Oil & Gas companies either International or National scale such as: PTTEP-MOGE Myanmar, Pertamina Refinery Unit V, Pertamina Hulu Kalimantan Timur (PHKT), Arabian Gulf Oil Company (AGOCO), British Petroleum, Total EP Indonesia, ExxonMobil, Chevron Indonesia Company, Virginia Indonesia Oil Company (VICO), PTTEP Thailand, Pertamina EP and Medco Energy as well as Weatherford and Scomi Oiltools as Service Company that have enriched acknowledgement of QHSE ethics, codes and standards from their daily basis through various levels (Officer, Supervisor, until Manager). For over 20 years overall period of working experiences that initiated from non-technical works, by will and opportunity, made me become involved in this technical function on Oil & Gas Operation and Exploration either Constructions or Development Projects.

Supervisor / Technician, Superintendent

More than 12 years Include in Oil & Gas, Marine, and Power Plant. I Have experience about Inspection, Document, Installation, Engineering, Commissioning. I like to teamwork & have never leave a project under bad condition. it gives a good sense of achievement and job satisfaction to me

Inspector, Engineer, Drafter / Designer

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

I am graduate of Chemical Engineering in 2022 with a GPA of 3.87 and the most outstanding student in the Faculty of Engineering in 2021. I have several internship and organizational experience for 3 years. I am a fresh graduate who always wants to learn something new, a hard worker, and has a high responsibility. I have good communication, public speaking, and leadership skills. I can work in a team or individually and can adapt quickly. I have expertise in using Microsoft Office as well as several process simulations software. I have interested in process engineer, production operator or staff, quality control, research and development, and anything else related.

Engineer

I have more than 14 years career experiences in various major Oil & Gas EPCIC/EPC project. Currently, I serve for Dialog Energy Sdn. Bhd. as role of Senior Project Engineer (Mechanical & Piping). I am member of Board of Engineers Malaysia (with Reg. No: G179141A) since year of 2012. My main strengths and functions are mainly in mechanical engineering package and fabrication engineering with some project management capabilities. I am very cooperative person either individually or in a team, I assure you that willing to work in minimum supervision to complete the work or task given to me with considering the quality of work with safety and quality manners. You will find me as a well- organized individuality with excellent analytical and problem-solving skills. I thrive on new challenges, and my innovative approach to systems and improvement, along with my desire to learn, will prove to be a greatest asset to the industries.

Engineer

A Welding Engineer and Welding Inspector with 4+ years of experience. Qualified international welding engineer and certified welding inspector with demonstrated history of working on worldwide project of energy, oil, and gas industry. Skilled in metallurgy, NDT, welding inspection, and welding engineering. Strong quality control and quality assurance. Familiar with international standards and codes.

Engineer

Experience in Oil & Gas general industrial field and Terminal. Current position as Junior Tankage Engineer that manage Tankage department efficiently to ensure excellent departmental performance and optimized the resources effectively.

Engineer

Boasting a solid 6-year track record as an Electrical Engineer, developing expertise in a variety of project fields such as Power Plants, Oil and Gas, Petrochemicals, and Small Buildings. Proficiency extends across all project development phases, from tender/proposal stages, feasibility studies (FS), Front-End Engineering Design (FEED), Detailed Engineering Design (DED), to engineering in the EPC phase. A substantial number of technical documents have been successfully produced and delivered, supporting a diverse range of company projects. These encompass comprehensive electrical calculation reports, system studies using ETAP, simulations via DIALux software, design basis, specifications, data sheets and single line diagram. My clientele spans from state-owned companies (PERTAMINA and PLN) to private enterprises (Wilmar Indonesia and E&E Gas Shd Bhd). Also has expertise as Upstream Oil & Gas Company Project Development Engineer regarding to Final Investment Decision (FID), Plan of Development (POD), Project Summary (PS), Authorization of Expenditure (AFE), Budget Scheduling (BS), Work Program and Budgeting (WP&B), Placed into Service (PIS). Reliability and dexterity have been key in contributing to engineering service companies and upstream oil and gas companies. Committed to delivering top-tier engineering solutions that drive project success and foster organizational growth.

Engineer, Drafter / Designer

A seasoned Governance, Risk and Compliance professional with 16 years of solid experience in financial/insurance, diversified conglomerate business covering both enterprise, operational risk, regulatory compliance with exposure in financial crime compliance, data privacy, Integrity, WB, ABAC, TPRM, business continuity and board governance which will be able to add-value to any organizations. In addition, I have prior working experience for approximately 6 years in the corporate advisory, internal audit, business consulting and corporate recovery before embarking my career in the risk and compliance function. For the past few years (since 2020), I have also successfully completed and delivered several high impact projects and being recognised as a high potential employee (HIPO).

Other, Manager

ROTATING

Engineer

Experienced Drilling Engineer skilled in planning and execution of complex wells with high emphasis on HSE. Strong background of working in both office and field-based roles across four countries in challenging environments. Well versed with all stages of a well delivery cycle. Knowledge of drilling engineering tools include Compass, WellPlan, Stress Check, WellCAT and Open Wells (Landmark suite).

Engineer

A sound Engineer working in Pakistan largest oil and company for than five years, working in operations, safety, process design, logistics, feed design, planning scheduling, procurement, design change, Hazop, risk assessments, collaborating with environmental agencies to work in a controlled environment. More leading the engineering teams from front as a part of management.

Engineer, Supervisor / Technician, Manager

• 20 years of experience in the oil and gas industry; strong background in field operations and project management • Excellent interpersonal skill; ability to build and foster positive working relationship with diverse professionals comprising of clients, stakeholders, vendors, and engineering peers • Good leadership skills with experience in coordinating, leading and coaching personnel • In-depth knowledge of the industry Health, Safety and Environment (HSE) policies and an active participant in HSE programs and activities • International experience with overseas work assignments at various locations in Asia and Africa

Engineer, Supervisor / Technician

Working at various onshore and offshore projects including maintenances work, routine inspection during shut-down and fabrication stage for more than 15 years as QA/QC Engineer and Welding Inspector. Work nature included visual inspection, witnessed testings, witness/co-ordinate NDT activities, and prepares/review all required documentation. Familiar with QA/QC document system, traceability record and familiar with standard and specification related

Engineer, Inspector, Manager, Supervisor / Technician

Greetings!! Briefly, I am Ashish Shrivastava, Independent Engineering Consultant (with group of freelancers) core being Piping stress with 15+ years of experience. I have done wide range of stress analysis in different sectors like Offshore/onshore, Marine, LNG/LPG, Petrochemical, Solar/ Thermal powerplants.    I take turnkey projects of pipe stress analysis  My client list has MNCs names like KBR, Technip energies, RINA-SPA along with long list of startups and small companies.  I would be happy if you can consider my profile for pipe stress analysis work that would like to outsource. I assure you this will help you reduce schedule and cost by 40%.

Engineer, Manager, Superintendent

Technical Manager with over 15 years’ experience on major international energy project in Energy and Renewable business. With personal achievement * 43 projects fully completed in time, quality & budget * Handle subvendor bankruptcy with 12M$ project

Certified Coating Inspector with more than 17 years' experience in various protective coat ings for EPC projects , oil & gas, onshore/offshore facilities fabrication, maintenance and marine coatings industry. Comprehensive problem solving abilities, dedicated to maintaining quality standards, have a good verbal and written communication skills, ability to deal with people diplomatically, will ingness to learn, team facilitator, creative thinking, innovative thoughts, easily adjustable to environment.

Supervisor / Technician, Inspector, Engineer, Superintendent

A qualified and experienced inspector for more than 10 years specializing in Oil & Gas industry onshore and offshore. Have worked with a wide range of equipment, including piping and structure inspection, painting inspection, valve inspection and etc. Able to develop and review welding procedure specifications (WPS), qualifying welders tests (WPQT), inspection test plans (ITP), QA/QC documents/procedures review. Familiar in certain codes and clients' technical specifications which have helped me develop a keen eye for detail and the ability to identify issues and concerns that need to be addressed.

Inspector