Commissioning freelance

Please refer to the attached CV

Engineer, Superintendent, Manager

I am thirty-three years of age, married and in good health condition. I was graduated from Institute of Technology Sepuluh Nopember, Surabaya in 2013. My scholastic record is satisfactory and also skilled at Instrument & Control, 10 years of total experience, with 8 years in Instrument Engineer. I am be able to use English both oral and written, computer literate, able to use Instrument Field Device, and Metering System, also familiar with English Correspondences and Administration duties. Now, I am working as Sr. Technical Support Engineer at PT. CONTROL SYSTEMS ARENA PARA NUSA. I am willing to learn and work very well with others and anxious to put my knowledge into practical. The reason is a field of interest that I wrestled instrument engineer, where at the lecture I really liked the course and the results I achieved in the great lecture. The challenges will I face is adaptation to the new environment and the equipment that I did not previously know, but I will make every effort to achieve the targets I had planned.

Engineer, Superintendent

* More than 10 years of experience across India, Abu Dhabi, Iraq, Oman, Kuwait & Qatar as Piping Engineer, Piping Supervisor, Construction Supervisor in executing Oil & Gas projects. * Worked on fabrication & erection activities of U/G & A/G piping, CS, SS, LTCS & as in live and new plant. * Worked for Piping, Structure, Equipment, Cladding and all Mechanical related work. * Proficient with Eng. codes & specifications like ASME B.31.3, B.31.1, ASME-16.5 NACE standards * Rich experience of preparing piping related drawings like isometric, general arrangement, P&ID, pipe support drawings, plan, plant smart viewer (3D) and structure drawings * Perform piping Line Check and writing punch list then carrying out A punch clearing work prior to hydro test. * Supervised & led teams, allocated work profiles, prepared various reports and reported to the management & client. * Successfully led completion of projects MEGA TURN AROUND 2021 EP1 Machine Replacement Shutdown Project (QAPCO) Mesaieed, Doha Qatar, Kuwait New Refinery Project Package-5 Al-Zour (KNRP) Kuwait, Sohar Refinery Improvement Project (SRIP) Oman, Central Processing Facility (CPF) Badra Oil Field Iraq, Asab F F D Project Abu Dhabi (UAE) * Erection and alignment of fractionation columns, stripper column, sweetening and stabilization column, sour water stripper column and Amine regeneration column, Compressor, Turbine, Exchanger, Condenser, Pumps and Lube oil skid. * Erection and alignment of flare HP and LP knock out drums, slag catcher, water draw of vessels, electrostatic deserters, stage separators, fin-fan coolers, heat exchangers, purge bins, instrument air and plant air receivers, degassing gas boots, fuel gas scrubber, nitrogen purification vessel. * Supervise for installation of 1.6 KM onshore and 1.7 KM offshore Sulphur Belt Conveyor System including main Conveyor structure, 5 Transfer Tower structure, Magnetic Separator, Elevated Gallery, Ship loader and all Cladding work. * Skilled in executing piping erection, punch listing, hydro testing, and commissioning activities of complete piping system. * Collaborated with cross-functional teams to ensure completion of project. * Excellent communication & interpersonal skills with strong analytical, problem-solving, and organizational capabilities

Engineer, Superintendent, Supervisor / Technician, Inspector, Other

Over 20 years of design and project background mainly served for Oil & Gas industries, factories, high rises and commercial buildings. Experienced in various project stages such as feasibility studies, conceptual and preliminary design, FEED, DED, Tendering, project execution for green fields and brown fields, EPCC projects including vendor and authority management. Professional Engineers registration with the Board of Engineers Malaysia (BEM), ASEAN Chartered Professional Engineer (ACPE), Professional Technologist registration with Malaysia Board of Technologists (MBOT) and certified Electrical Supervisor PE1-1kV by Malaysia Energy Commission. Well versed with international standards and Malaysia regulations (ABE1990, PPE1994, PTS, IEC, IEEE, IET).

Engineer, Superintendent

I have 9 years experience at engineering and contruction (Oil and Gas, Power plant and industry) looking for profesional career and sucsess. I have specialities : Mechanical rotating and static (Steam & gas turbine, Generator, Compressor, general sentrifugal verttical and horizontal pump, fan & blower, and related machinery machine). Installation, completion and commisioning phase responsibility

Inspector, Engineer, Supervisor / Technician

Over 13 years' work experience in Conceptual Study, Front End Engineering Design, and Detail Engineering including construction of Oil & Gas sector (onshore & offshore) both upstream and downstream as Process Lead Engineer, Sr. Process Engineer, Process Engineer and has knowledge of applicable codes & standards.

Engineer

I have experience at EPC, power plants and oil&gas projects with Siemens, BP, GE, thyssenkrupp Uhde as freelancer. I am responsible for all electrical work as check list for every system then do test for cables, motors, transformers, Battery room, switchboard LV, MV, HV and put all parameters for all types CB then prepare all ECC documents requirements for handover systems to commissioning team with all LOP to close it with Client and help him to prepare TOP. I can cooperate with all team members to cover all problems we have for systems. I also speak Deutsch, French, English and Arabic, I can work in whole Africa beside Asia and all world no problems to willing anywhere.

Engineer, Superintendent, Supervisor / Technician

RUMENTATION AND CONTROL SYSTEM ENGINEER ▪ Having over 21+ years of experience in Basic & Detailed engineering, Testing, Installation, Pre-commissioning & Commissioning, and startup up activities of Instrumentation and control systems. ▪ Expertise in with Emergency Shutdown System (ESD/IPS), Fire and Gas System (FGS), High-Integrity Pressure Protection System (HIPPS), Burner Management System (BMS) and Distributed Control Systems (DCS). ▪ Experience in interfacing with various third-party control system communication packages through TCP/IP Modbus and OPC protocols. ▪ Knowledge in HAZOP, SIL determination and evaluation process. ▪ Proficiency in designing, implementation & testing of wide range of I/O, basic control functions, interlocks, Sequences, Operator interface and other control components. ▪ Expertise in managing engineering teams and provide technical guidance and mentoring as necessary. ▪ Proven abilities in swiftly ramping up projects with competent cross-functional skills and on time execution. ▪ Familiar with Piping and Instrumentation Diagram, Process Flow Diagram, Control Narratives, Cause and Effect diagrams, Shutdown hierarchy, Instrument data sheet.

Engineer, Manager, Superintendent

Instrument and control engineer with over Eight years of experience. I'm looking for a role that uses my skills and develops them further. I have excellent organizational and planning skills. I'm flexible about working hours and can work shifts.

Engineer

A results-oriented, highly accomplished and attentive Hook-Up & Commissioning Engineer with 10+ years of experience in project management, operations management and successful implementation of projects, programmes and solutions in the Oil & Gas, Petrochemical, Electronics Manufacturing and Supply Chain industries. Extensive experience in handling various projects and turnarounds offshore / onshore involving Hook-Up, QAQC, Pre-Commissioning, Commissioning & Start-Up, Site Operations and Maintenance of instrumentation & control, electrical, mechanical and piping system.

Engineer

Project Document Management professional with 20 years of experience with Oil & Gas, LNG, EPC, FPSO, Construction, Mining and Industrial Engineering. As working for Client and PM /CM organization I am responsible for Developing, Creation and implementation of Documents management system Procedure and Process on projects / Organizations. Using Different Electronic Document Management System (EDMS) Application like Aconex, Share Point, and Primavera Contract Management Creation of Automated Workflow as per project Contractual Communication Protocol. Provide Documents Management Training to Internal and external stake holders of Project / Organization. Hiring and Managing Document Management Team on Projects. Conducted External Audit with Quality team as per ISO 9001:2015 Standards. ● Aconex ● EDMS Configuration ● Vendor Selection ● Quality (QA/QC) Control ● Project Document Control ● Process Management ● Project Coordination ● ISO Auditing ● Workflow Management ● Document Validation

Manager, Supervisor / Technician, Inspector, Engineer

 Experienced, highly-skilled and proficient Senior Instrument Engineer professional, holds17 years of experience in technical field, analysis and troubleshooting to identify issues for complex projects with an advanced detail-focused approach to perform inspections, calibration, overhauling and loop checking of Instrumentation system. Skilled at providing technical guidance to optimize layouts, systems and offering innovative solutions; expert at managing, planning, developing and maintaining large-scale construction projects  Performance-oriented individual possesses great potential at ensuring all Electrical activities are delivered according to requirements. Adapt at adjusting changes in schedule, team structure, assignment parameters, and organizational goals. Skilled at offering unparalleled integrity, initiative, resourcefulness, consistency, and diligence in achieving project completions, on time & budget  Task-focused individual skilled at testing and maintaining existing systems, analyzing data and presenting findings, and providing consultancy support. Dynamic individual capable of working and liaising in multi-disciplinary project teams. Proficient at diagnosing malfunctioning systems, proposing modifications and retesting products to ensure conformance to design & equipment specifications

Engineer

1. Negotiation 2. Financial consultancy 3. Diplomatico 4. CAPEX, OPEX, WBS 5. Project management

Result-oriented Mechanical Piping Engineer with more than 10 years of experience in Hook-Up and Commissioning (HUC) project management seeking an opportunity to expand career and contributes ideas through engineering/management project which further develop my strong leadership, communication, teamwork and technical skills.

Engineer, Supervisor / Technician, Manager

Instrumentation and Control System Professional with fifteen years of experience in Onshore/ Offshore/FPSO Oil and Gas, production facilities. Areas of expertise include process automation, calibration and maintenance support which involves the commissioning of new control system in the production facilities, technology transfers, up gradation of oil and gas production facility. Specialist in Configuring and troubleshooting of DCS, PLS, ICSS , F&G , SCADA, RTU and Field Instruments

Engineer, Superintendent, Manager

Excellent personnel with analytical skills and strong knowledge of Construction, Hook-up, Pre-Commissioning, Commissioning, Start-up, and Maintenance works not limited to engineering, planning, procurement, construction, installation, acceptance test that characterise this highly skilled professional with total of 17 years of experiences including more than 10 years of offshore experience.

Manager, Engineer, Superintendent

Project Turnover and Completion Coordinator

Engineer, Manager

Petroleum Engineering Graduate with 1+ years of experience in Cathodic Protection, Subsea Inspection, IRM (Inspection, Repair and Maintenance), Diesel Engine maintenance, Non-Destructive Testing, and Rig Services. Proven track record of success in managing projects, leading teams, and ensuring timely and efficient execution. Seeking an entry-level position to apply technical skills and contribute to the success of a dynamic organization.

Engineer, Inspector

I am a highly motivated, self-starting, and seasoned project professional with 33 years of experience employed by Chevron in oil, gas, and LNG facilities and infrastructure. I have worked in all project phases, including Concept, FEED, Alternative Selection, Detailed Design, Procurement, Execution, Systems Completion, Commissioning, and Handover, in the project, engineering, procurement, fabrication, construction, systems completion, Hook-up and Commissioning, and project close-out and initial start-up support manager positions. I am a Chartered Mechanical Engineer, Eur ING, CEng, FIMechE, FEI, PMP, and AIGPE Quality Champion accredited. I am a team player, committed to being Incident and injury Free, protecting the environment and quality in delivering all my projects, and relishing developing people to their full potential. I have experience in troubleshooting issues experienced during initial start-up, providing solutions, and coordinating vendor support and claims

I'm an electrical engineer with 16 years working experience in EPC projects, ( Power Oil&Gas) I'm looking a new challenge where I can grow in my careers

Superintendent

I have experience in the Independent Power Producer, starting from project, commissioning until operating and maintenance. I have the capability for Permit to Work (PTW) and able to use of Computerized Maintenance Management System (CMMS) as a work order system. Also, I am capable of Preventive Maintenance, Corrective Maintenance, Minor and Major Overhaul of Main Steam Turbine and apparatus. The others, I handled spare part check list availability and involved the power plant modification. I am capable to handle maintenance activity and make a report also for the all of rotating and static equipment such as steam turbines, various types of pumps, compressors, valves, heaters, etc.

Engineer

A seasoned chemical engineer with about 30 years of International experience in upstream oil & gas, refining, Renewables and LNG industry. Experience ranges from concept engineering, front end studies, techno-economic feasibility studies, detail engineering, start-up/commissioning assistance and Asset management. My greatest strength is in providing integrated engineering & asset management solutions to maximize value to the business.

Engineer, Manager

 I have good work knowledge of Control Room, Well Testing; well head TOWER operations, RMS, SIMOPS Operations, Water injection and Gas injection, Plant maintenance, Pre-commissioning and Commissioning, Start up, shut down activities, Monitoring Parameters, Shift handover

Supervisor / Technician, Other

I am Specialist of Material and Senior Material

Superintendent, Manager, Inspector, Supervisor / Technician, Other

Reliable Electrical Commissioning Engineer in Oil & Gas, Grid substation, Power Plant Operations, Maintenance, Project Management, Site subordination Troubleshooting & Team Management and business enhancements that enable individuals and organizations to improve the quality and productivity. Well presented with excellent communication skills and having a "Commercial approach" to solving problems and developing business.

Engineer