Hire the best freelancers in mechanical for your project
Adib Sofwan is a highly skilled Engineer with 7 years of experience in the construction and oil and gas sectors. He has a proven track record in project management, leadership, communication, and planning, particularly in the execution of mechanical static and package equipment. Adib is well-versed in international standards such as ASME, API, FEM, BS, EN, PetroBras Standards, and PETRONAS Technical Standards (PTS). He has successfully collaborated with esteemed clients including Petronas, PetroBras, Sapura Energy, Dialog, and Top Glove. Adib possesses extensive hands-on experience and proficiency in utilizing Solidworks and AutoCAD for designing safety catch net systems, shoring supports, and 2D and 3D access scaffolds. He is now actively seeking a dynamic role where he can work closely with senior management, further develop his technical skills, and expand his knowledge in project management around the world.
Engineer
Asset Integrity Management EMAS Asset Integrity Management · Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. · Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. · Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. · Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. · Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells · Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. · Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project · Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. · Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster · Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster · Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster · Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc. Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) · Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK · Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster · Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 · Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster · Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. · Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period. Safety & Constructability Review Studies Drop Object Protection – KND Platform · Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster · Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines · Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster · Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex · Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. · Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster · Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) · Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification. Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: · Conducted Pre-Project Kick-Off Meeting activities, including: · Defining the Scope of Work · Establishing the Project Schedule · Developing the Master Deliverables Register · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. · Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: · Performed Steady-State Flow Assurance Analysis using PIPESIM. · Developed the Subsea Production System Report detailing subsea configurations and system integrity. · Created the Design Basis for Process, outlining key process parameters and design considerations. · Formulated the Overall Field Development Scheme to optimize production and operational efficiency. · Developed the Brownfield Modification Report for integration with existing facilities. · Engineering Studies & Reporting: · Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. · Conducted a Concept Screening Assessment to evaluate viable development options. · Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. Feasibility Study for FB-1 Market & Commercial Analysis: · Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. · Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. · Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: · Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. · Process Safety & Design Evaluation: · HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: · Two tie-in options: MPPL or Existing WHP · Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 · Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant · Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements. BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification · Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. · Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: · Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. · Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: · Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: · Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: · Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. · Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: · Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. · Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: · Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis · Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency · Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration · Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield · Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. · Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. · Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. · Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. · Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. · System testing, commissioning, and performance verification to ensure operational readiness. · Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. · Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. · Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.
Engineer
30 + Years: Started career from pressure vessel manufacturing industry for Refinery, petrochemical plant and boiler equipment and employed in the oil and gas industry Offshore and Onshore Projects pipeline, plant piping and above ground storage tank projects since 1993. Familiar with all aspect of the QHSE function from FEED, input to EPC bid/tenders' stage and participate pre and post tender clarifications, writing PMT procedures, review and approval.
Engineer, Manager
* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage
Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician
He has over 23 years of industrial experience working in energy and utilities industry performing inspection, assessment and providing specialist advice/solution, leadership and mentoring in quality, with over 17 years in the capacity of supervisor up to acting Company Site Representative (CSR). He is a Welding/NDT Inspector by training, however for the most part of his career as a quality personnel, most of the time he dealt with multi disciplinary missions. His high proficiency in welding QC therefore, is strongly backed by demonstrated competencies and knowledge in other associated disciplines i.e. structural, piping, mechanical packages equipment (static and common rotating equipment), Mechanical Joints Integrity, protective coatings and vibration basics. He is also stands in as a Construction Supervisor when required, with significant contribution to the field works progress. Consistently upgrading his career where from year 2008 onwards he continued as a quality team member represented esteemed end users and EPCC such as PETRONAS, Woodside Energy, Eni, Shell, Saipem and Foster Wheeler etc. In year 2012 he was heavily involved in subsea projects performed vendor surveillance for the manufacturing of drilling and wells completion equipment such as wellheads, Christmas trees (XT) including its associated equipment and tools, Subsea Control Modules (SCM), production manifolds and pipelines (WPQT/WQT and multi joints fabrication). Extensive hands on experiences in multiple disciplines and project cycles has made him versatile, adaptable to the fast track project environment, able to anticipate problems and further provide solutions in wider perspective besides make timely decisions in daily activities relevant to the specific project. He had attained distinguished track records in delivering Quality Management System (QMS) programs through his commitment towards “Do It Right First Time” and continuous improvement in numerous major projects related to hydrocarbon processing equipment and facilities ranging from greenfield development to brownfield modification (including plants reconstruction, rejuvenation, revamp and turnaround).
Inspector, Supervisor / Technician
Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.
Engineer, Inspector
Multi-skilled project management professional with more than 20 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.
Manager, Superintendent, Engineer
More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards
Inspector, Supervisor / Technician, Engineer, Superintendent
Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.
Engineer, Superintendent, Supervisor / Technician, Inspector
● Mechanical equipment, process engineering and material handling equipment knowledge. ● Total 15 years of working experience in engineering of mechanical equipment for offshore platform Oil and Gas industries, FPSO Topside equipment and Power plant industry. ● Experience work together with commercial team, QA/QC team, logistic and construction engineer in EPCC company. ● Working experience inclusive of FEED, Pre-bid engineering, and detail engineering. ● Attend Factory Acceptance Test. ● To reply Site technical query or provide support at site if required. ● Equipment knowledge covering static, rotating and packaged equipment e.g., Gas turbine driven equipment, pumps, lifesaving appliances, screw compressor, filters, packaged equipment etc. ● Experience of dealing with many EPC Contractors and equipment Vendors. ● Familiar with International Codes and Standards and wide range of client's specification, ● Knowledgeable in interdisciplinary activities for the integration of packages / equipment. ● Experience working with global team.
Engineer
To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.
Engineer, Manager
Hi Im Aiman .For your information,this year I am 29 years old. I graduated from University Technology Malaysia with a Bachelor Degree in Naval Architecture and Offshore Engineering.Currently , I am Project Application Engineer in Lutz Jesco East Asia Sdn Bhd since 2019 which has mostly been involved in Water Treatment Plant and chemical plants . Before this , I have been working in the oil and gas industry for 2 years as a project engineer at Petrico Engineering Sdn Bhd (2017-2019) of which which have successfully managed various projects throughout these years. I am aware that the company has been engaged in some exciting projects and initiatives in the industry in recent years. As you can see, I have been involved in similar work and I could greatly contribute to your company’s goals in the future. I am highly passionate to work in this industry. In addition, I also have high competencies in AutoCad, Solidwork,PV-elite and Maxsurf which will be an added value to your organisation. Attached herewith is my CV and certificate for your kind reference .I really look forward to meeting with you and discussing my qualification in more detail Thanks
Engineer
Mechanical engineer experienced in maintenance, inspection, training and designing fields of fluid power systems, lifting, static and rotating equipment. Passionate in 3D designing, additive manufacturing, rapid prototyping, and simulation analysis. Attained the NCEES FE mechanical exam pass and eager to obtain the professional licensure.
Engineer, Drafter / Designer
I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.
Engineer, Inspector, Superintendent, Supervisor / Technician
•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc…
Manager, Superintendent
Dear Recruiter, Let me introduce myself, my name is Agung Setya Wicaksana, a highly motivated and experienced Project Engineer with 5 years of professional experience, I have gained extensive knowledge and skills in Engineering and Project Management, which I believe will be essential to help and enhance the operations of your company. I executed and managed projects, where I learned value engineering or best practices techniques and strategies that helped me in achieving project objectives. Besides, my strengths in problem-solving, planning, and teamwork have helped me excel in my previous role. I was responsible for procedure or Method of Statement project execution, cost and budget management throughout the projects' lifecycle, and project expenditure. I have been involved in the planning and scheduling of projects, ensuring that they meet the required deadlines and other objectives. I have also been experienced in identifying issues that arise in projects, coming up with effective solutions in a timely manner while collaborating with team members and stakeholders to ensure timely execution. My team-oriented mindset helps me to work collaboratively with cross-functional teams, ensuring that everyone strives toward a common goal and I am eager to apply them to further advance my contributions to the company.
Engineer, Other
Over two decades of experience in design office and fieldwork combined for both offshore and onshore environments, managing related scope of work for oil and gas facilities in both green and brown field. Performed various duties and responsibilities throughout career in every facet of asset life cycle, covering engineering, construction, offshore hook-up & commissioning, plant start-up, and offshore facilities operation activities. Additionally, led a successful offshore campaign for asset’s end of life cycle, seeing through production cessation, facilities’ hydrocarbon free status, asset demobilization, field’s plug and abandonment, and decommissioning activities with occasional involvement in shutdown campaign. Recently involved in one of high capacity FPSO, executing Detailed Engineering Design for Petrobras’ P82 FPSO including procurement support and FEED verification activities, as well as involvement in FEED for Malaysia’s first CCS (Carbon Capture & Storage) facilities at Kasawari CCS. Prior to joining Ranhill-Worley, Faroak has expanded his experience in mechanical engineering and overall facilities functionality, leading overall campaign of Hook-Up & Commissioning for Mubadala’s Pegaga (SK320) until early phase of operation. End-to-End experience in mechanical equipment engineering and application, primarily in rotating and packaged equipment encompassing DED, FEED, feasibility study, HUC, O&M and asset revitalisation for topside facilities, in various roles and functions. Sound knowledge and experience with field activities including operational duties, commissioning, hands-on experience in equipment alignment, fault findings and troubleshooting. Also equipped with experience and understanding of process scheme and requirement with the knowledge of essential components of instruments, electrical and other multi-disciplines requirement. All these experience and involvement have supplemented value added knowledge to every role and function at any execution phase. Well versed in overall roles and functions in EPCIC framework, managing team of engineers executing engineering activities, procurement support, contract management, vendor package management, bid evaluation to PO issuance, fabrication, testing (FAT), inspection and delivery and hook-up commissioning & start-up, meeting the quality and delivery within the specification, schedule, and budget whilst keeping adherence to HSE values. Understand risk, change control, and interface management between disciplines, departments, and other stake holders. Capable to support tender proposals including CTR’s preparation and generation of scopes of work, and engineering studies for mechanical and HUC activities. Management experience with strengths in leadership, communication, negotiation, with the ability to provide solution to engineering and operational problems, as demonstrated among others leading field operation at Repsol’s South Angsi ‘A’, HUC at Mubadala Energy and detailed engineering for Petrobras’ P82. Good in nurturing and guiding young engineers and developing high performance team.
Engineer, Manager, Other, Superintendent
* An experienced engineer with a strong interest in projects that require both conceptual and analytical thinking * Fully committed to exploring new challenges in unfamiliar environments * Always eager to learn new skills and techniques from anyone, regardless of their industry * Open-minded and adaptable, with a passion for continuous growth and improvement
Engineer
Total 3 years’ experience in the oil and gas industry as an HVAC engineer for HVAC contractors and consultants. Worked on HVAC system design for onshore and project management. Knowledge in the design of HVAC systems such as heat load, duct pressure loss, equipment selection, air distribution system etc. Major experience in project management, Engineering works, technical evaluations, cost estimation, Operation and maintenance, and preparing HVAC system documents and drawings. Total 4 years’ experience in M&E systems for industrial and commercial buildings. Worked on ACMV, HVAC systems, Building Automation Systems (BAS) for HVAC installation and testing, and commissioning. Major worked in the semiconductor industry and focused on the cleanroom system which included design and build, renovation and improvement of HVAC system.
Engineer, Manager
EXPERIENCE : HAVING 12 YEARS OF EXPERIENCE IN INDUSTRIAL FIELD, WELDING, QUALITY CONTROL (QC), MECHANICAL & PIPING TESTING, FACTORY ACCEPTANCE TEST (FAT) INSPECTION & COMMISIONNING, TURNAROUND IN OIL & GAS (ONSHORE & OFFSHORE), POWER PLANT, SHIPBUILDING CONSTRUCTION PROJECT AS PROJECT COORDINATOR, MECHANICAL & PIPING INSPECTOR, QC SUPERVISOR/COORDINATOR AND QA/QC ENGINEER.
Engineer, Inspector
Results-driven Mechanical Engineer with 17 years of experience in the oil and gas sector, specializing in static, mechanical package equipment and engineering design assurance. Adept at project execution, risk assessment, and vendor coordination, with a proven track record of delivering complex engineering solutions for major oil and gas projects. Strong analytical skills, excellent teamwork, and a commitment to continuous improvement.
Engineer
I am Fairol Hasbullah, a dedicated and skilled Structural and Project Engineer with over 10 years of hands-on experience in metal fabrication, structural steel, and piping construction, particularly within the oil & gas and heavy industrial sectors. My technical foundation is backed by a Diploma in Engineering Technology (Metal Fabrication) and certifications in Tool & Die Mechanical Engineering. Throughout my career, I have contributed to various high-profile EPC and EPCC projects involving pressure vessels, skid structures, subsea pipeline field joint coating, offshore riser clamps, passive fire protection, and large-scale grouting/flooding systems. I bring strong expertise in Autocad 2D/3D design (including isometric, P&ID, and BOM), CNC programming, project costing, fabrication procedures, and lifting/loadout operations. I am highly adaptable, detail-oriented, and well-versed in coordinating with multidisciplinary teams to meet project timelines and client specifications. With a deep understanding of fabrication processes and safety standards, I aim to deliver high-quality, cost-effective engineering solutions on every project.
Engineer
Diploma in Quality Engineering Technology, with over 6 years of experience in quality control and welding inspection, I have worked across various companies like Hamdan Abdullah Sdn Bhd (HASB), Faiz Engineering Services Sdn Bhd (FESSB), and Seremban Engineering Berhad (SEB), providing expertise in welding and fabrication inspections. I specialize in ensuring compliance with industry standards and client specifications, managing critical inspections for pressure vessels, structural frames, and piping. My experience includes material handling, safety and compliance management, calibration, flange integrity, and non-destructive testing (NDT) techniques like UT and MPI. As a Freelance Offshore QC Welding Inspector, I lead inspection teams, provide training, and ensure accurate documentation, maintaining high-quality standards throughout the project lifecycle. I also oversee coatings and surface treatments, ensuring compliance with safety and quality regulations.
Inspector
Experienced Heavy Equipment Maintenance with a demonstrated history of working in the retail, forestry, mining, construction and power power plant industries. Skilled in preventive & corrective maintenance and have skill on transfered knowladges as mechanical trainer.
Engineer, Inspector, Other, Supervisor / Technician
Mechanical Engineering graduate with solid field and project engineering experience in the oil and gas industry. Proven ability to manage equipment readiness, control valve installation, and pump sagging EPCC projects. Skilled in interpreting technical drawings, coordinating fabrication and commissioning activities, and ensuring compliance with project specifications. Adept at working with rotary machinery such as power tongs and collaborating with cross-functional teams to deliver timely and cost-effective solutions. Detail-oriented, adaptable, and driven to contribute to engineering excellence in high-demand environments
Engineer