Commissioning freelance

Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.

Engineer, Superintendent, Supervisor / Technician, Inspector

Process engineer with more than 6 years of experiences in various petrochemical projects at all phases starting from Feasibility Study until handover at Project Completion. Adept in process technical and commercial evaluation, value engineering, and interfacing work with multiple stakeholders. Consistently perform excellent communication skills and capability to thrive under pressure.

Engineer

Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.

Engineer

Electrical engineer with more than 12+ years of experience at Oil & Gas sector. Familiar with PTS, IEC, EX requirement on electrical package. Experience with Detail Design Engineering, Electrical inspection, Construction, Pre-commissioning & Commissioning. Has involve in EPCC, PCC, Brownfield, and Greenfield & Hook-up Commissioning.

Engineer

Bachelor's degree in Mechatronics Engineering with 14 years of extensive experience in project management across various organizational levels and portfolios. Expertise includes sub-contractor management, client interactions, and adaptability to diverse working environments. Proficient in navigating management setups, contract execution strategies, and project-specific requirements. Well-versed in government and local regulations, client-specific standards, and international best practices (DEP, ASME, API), as well as design and operational codes/standards. Demonstrated ability to effectively oversee and managing project budgets and funds, with a strong foundation in contract management and procurement.

Manager

Result driven, dedicated and quality-focused engineer offering 14 years of experience in oil and gas industry with a history of working well In fast-paced challenging and team-oriented environments. Transforming goals into actionable plans and providing positive leadership to cross- functional teamma. Hands on experience working with mechanical, civil, electrical and collaborating with oil and gas companies for the completion of projects.

Engineer, Manager

* Total experience in the Oil and Gas Industry is more than 24 years, with details of 6 years in the field of oil refinery operations, and 18 years in the field of processing facility design (consisting of 15 years onshore and 3 years offshore) both in Indonesia and abroad (Sultanate of Oman and Brunei Darussalam) * Extensive experience in Concepts, FEED (Front End Engineering Design), DD (Detailed Design) for onshore/offshore processing facilities, refinery operations (Crude Oil Distillation Unit, Naphtha Hydro Treating Unit and Catalytic Reforming Unit) and also start-up & commissioning. * Experience in process studies (flow assurance study, dispersion study, etc.) and proficient in several process simulation software (HYSYS/UniSim, Shell FRED, FLARESIM, PIPESIM and OLGA).

Engineer

Seeking challenging position in Mechanical with growing organization that can enable me to apply my knowledge, skills and experience in the best interests of organization to further my personal and organization goals. Professional Experience • Thirteen years vast experience in Machinery/mechanical/Maintenance field different Organization Onshore and Offshore pre-commissioning, Commissioning, Start-Up & Maintenance field such as, Oil & Gas Industry (FPSO) and merchant vessel. Leverage strong values & substantial Technical experience to continuous moves ahead & strive s to achieve high professional capabilities thereby adding values to organization and s elf. An effective communicator with excellent relationship management skills and stro ng analytical, leadership, problem solving & organizational abilities. Career summary Oil and Gas ( FPSO ) Industry Experience • 5 years of experience on FPSO, Offshore Maintenance and Operations of Engine Room and Topside machinery. • Major Contribution to Conversion and commissioning of traditional oil tanker in to FPSO and sail away to location. • Compliance and pro-active with Safety and Environmental procedures. • Daily Job Planning and Supervision. • Fully conversant with Offshore PTW system and major contributor in Job Safe Analysis (Risk Assessment) to all routine and critical jobs. • Yearly (TAR) Turn Around :- Job Planning and execution and supervision • Conversant with Fire and Gas System, Plant behaviour on ESD0, ESD1 and ESD2 • Engine Room and Top side Steam Plant Operation and Maintenance Panning, scheduling, supervising. • Continuous Training to local Watch Keepers. • Creating and establishing safe working practices/procedures for E/R and topside operations/ maintenance. • MDO bunkering and Oil Record Book updation.

Engineer, Supervisor / Technician

Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides

Engineer, Manager, Inspector

More than 20 years of extensive experiences in various fields of Instrumentation and Control i.e. construction supervision, E&I/Hazardous area inspection, mechanical completions, engineering, pre-commissioning, commissioning and start-up for offshore/onshore oil and gas project such as Wellhead Platforms, Gas Compression Packages, Process Modules, FPSO and Central Process Platform (CPP). Hands-on experiences in control systems such as PLC and HMI Programming, familiar with ICSS system, Modbus Communication, Bently Nevada BN3500 system, Variable Speed Drive, LV motor, MV Motor, LV MCC and MV MCC, with strong technical knowledge and experience in troubleshooting in commissioning activities.

Engineer, Inspector, Supervisor / Technician

Senior Instrument and Control System Engineer with 20 years of experience in project execution, design validation, and commissioning of instrumentation systems across petrochemical, power generation plants, and oil & gas sectors. Proven ability to coordinate multidisciplinary engineering activities, prepare technical documentation, and support construction teams during installation and commissioning phases. Extensive experience in validating vendor-supplied control valves, process sensors, and safety elements in compliance with international standards

Engineer, Supervisor / Technician, Superintendent, Inspector

More than 17 (seventeen) years of working experiences in various aspect of Project Management at EPCIC organization for Onshore and Offshore Oil & Gas industries. Proven skill in Project Management – job planning, manpower and resource planning, costing & budgeting, job execution, interface management, project coordination, quality control, quality assurance, regulatory compliance and HSE implementation. Excellent exposure on various project for engineering, procurement, supply chain, fabrication, construction, delivery of offshore campaign readiness, pre-comm/commissioning, and startup. Exposure to green and brown field, onshore construction, installation hook up work, top side, wellhead platform, jacket, risers, subsea pipeline, subsea aids, jetty, FSRU breasting dolphin, HDPE pipeline installation. Demonstrated ability to lead cross-functional teams, communication, and relation building skills, work effectively at all level management – communication and collaboration with Client, Internal organization, and Supplier.

Manager, Engineer

I am a passionate instrument engineer with ten strong years of experiences specializing in Instrumentation & Controls, Fire & Gas and Telecommunication systems spans from oil & gas to construction industries. I offer a unique combination of technical expertise, strong interpersonal skills, and unwavering commitment to excellence. I am confident in my ability to contribute effectively to any project in the instrument engineering field

Engineer

Experiences on Field Instrumentation and Control System for over 17th years in Oil and Gas Industry, especially at Engineering (Study, Pre-FEED, FEED, DED for Green or Brownfield), Fabrication, Construction, Pre-commissioning, and Coordination such as leading and interfacing work. Focus and concern to deliver project within cost, time, safe, reliable, and effective. Actively contribute on speeding project and takes priority on critical patch such long lead item and design input to supplier. Able determine project scope and boundary limit including for cost, time and resource estimation. Hard working reliable, trustworthy and respect to other.

Engineer, Manager

Well versed in project delivery from design up to commissioning, electrical engineering to multi-discipline liaising for proper integration. Package engineer for gas/diesel engine generators, transformer, UPS, DCS and Solar Power System. Coordinating construction work sequence, work schedule to the subcontractor. Adaptable to operate new software.

Engineer

To obtain a significant and challenging position in an organization, where a resourceful experience and skills will add value to a specialization operation. I aspire to take creative and diversified task to become globally competitive and eager to learn and incorporate latest techniques in real life applications. Working knowledge of IEEE, IEC and other regulatory requirements of power systems. An effectivecommunicator withstrong motivational and influencing skills and demonstrated ability to deliver deadlines.

Engineer, Drafter / Designer

Outstanding of 11 years of working experience & product specialist involving in customer’s project management for Mechanical Static & Rotating Equipment, Electrical & Instrumentation Systems (EIS), Special Piping (SP) Item, Heat-Ventilation & Air-Conditioning (HVAC) & Life-Saving Appliances (LSA) packages for offshore platform, onshore plant & marine shipping, Industrial Refrigeration for Food & Beverages, also Mechanical, Electrical, & Piping (MEP) for Commercial Buildings and Waterworks / Wastewater. Possessing a wealth of expertise and a proven track record to any organization especially end-users (operator). Flexible working as engineer, well-equipped to navigate the complexities of the industry and drive successful outcomes for any project. I undertake with knowledgeably of Philosophy, Functionality, Designability, Operability, and Maintainability (P.F.D.O.M.) of respective packages.

Engineer, Manager, Drafter / Designer

Dear Hiring Manager,   I am writing to express my interest in the current position at your company. With over 9 years of experience in project engineering and client relationship management within the oil and gas and marine sectors, I am excited about the opportunity to contribute my skills and expertise to your esteemed company.   In my current role as a Project Engineer at ADC Energy Ltd, I have successfully driven sales initiatives that resulted in substantial revenue growth and increased market share. My strong technical background, coupled with my ability to build and maintain client relationships, has enabled me to identify and capitalize on emerging market trends and opportunities. I am adept at conducting thorough market analysis, developing strategic sales plans, and delivering customized solutions that address clients' needs.   My experience at Pronal Sdn Bhd has further solidified my proficiency in managing complex sales cycles and leading cross-functional teams to achieve project objectives. By fostering collaborative relationships with stakeholders and delivering on promises, I have consistently exceeded sales targets and contributed to overall business growth. My commitment to understanding customer pain points has allowed me to tailor solutions that not only meet but exceed expectations, enhancing customer satisfaction and loyalty.   Holding an MBA in General Management and a degree in Electrical & Electronics Engineering, I bring a unique blend of technical knowledge and sales acumen to the table. I am eager to leverage my expertise in the marine industry to help your company achieve its sales objectives and enhance its market presence.   Thank you for considering my application for the position. I look forward to the opportunity to discuss how my experience and vision align with the goals of your team. I am available for an interview at your earliest convenience.   Sincerely,   Ahmed Mukhtar

Engineer

I have experience in offshore and onshore job for more than 9 years in Process Control System, Shutdown, Fire and Gas System engineering from design to software development. Total of 12 years including my earlier career in manufacturing. I have found my true passion and seeking for onsite working environment for new challenges and to improve my knowledge in instrumentation. I look forward to hands on jobs and believe knowledge and hands on experience are needed to truly understand and improve any system.

Engineer

Highly motivated and dedicated professional with a passion for project management and document control since 2013. Philosophical studies graduate with a proven track record of combining hard work, strong work ethic, and effectively handling multiple responsibilities. Possesses extensive knowledge in office administration, production planning, project administration, document control, and project management support. With over 5 years of experience as an administrator, adept at implementing strategies, developing and refining processes, and delivering comprehensive reports to senior management. Proficient in JD Edwards, ACCPAC, HRIS, and the Microsoft Office Suite. Works collaboratively as a team member, valuing effective communication and information sharing at every step, areas of expertise included : • Project Management • Production Planner •

Supervisor / Technician

Highly motivated and results-driven HSE professional seeking a challenging role in the oil and gas industry. Offering expertise in process safety support, HSE supervision, PTW coordination, and project management. Dedicated to maintaining HSE standards, ensuring compliance, and promoting a culture of safety. Committed to driving operational excellence and fostering a safe working environment.

Well versed in planning with exceptional problem solving and troubleshooting skills seeking a position in which these skills can be utilized and enhanced for betterment. Adept in carefully diagnosing and assessing issues and offering viable solutions.

Engineer

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

Hard Driven hands- on project, construction & commissioning personnel with more than 10 years of operation in oil and gas industry from downstream to upstream scope of work. Able to hold position in multiple layers in organization and independent in most working condition. A team player who listens and understand. Proven track record in major project worth up to RM200mln. At least 2 major EPCC and 2 major shutdown belts in hand.

Engineer, Manager, Superintendent, Supervisor / Technician

Graduate in Bachelor of Mechanical Engineering from Andalas University with an interest in metallurgy and material. A fast learner person, highly motivated and great passion in EPCI Industry. I have prior experience of 4 years as a piping engineer at Mcdermott Indonesia with a demonstrated history of working as detail engineer, pre-commissioning (piping completion & reinstatement), piping erection workpack by ASSET 55 and as FAT (Factory Acceptance Test) Engineer for subsea pipeline project. Skilled with AutoCAD, Naviswork, piping process, pipeline, Subsea Testing Method, Pipe Stress Analysis.

Engineer