Piping freelance

Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.

Engineer, Superintendent, Supervisor / Technician, Inspector

Multi-skilled project management professional with more than 21 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

B.Sc degree (Mechanical Engineer) Offshore Drilling Systems Rig ( New-Build/ Survey/ Inspection/ Refurbishment/ Modification/ Classification ) Engineering, Procurement & Installation Supervision (Mechanical/Piping) NORSOK / DNV / API International Projects SINGAPORE, Middle East & Caspian-Sea Shipyards (Owner/ Contractor team) Norway Work Permit Available for job Worldwide Relocate / Rotation

Superintendent, Engineer, Inspector, Manager

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

Technical Manager with over 15 years’ experience on major international energy project in Energy and Renewable business. With personal achievement * 43 projects fully completed in time, quality & budget * Handle subvendor bankruptcy with 12M$ project

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

I have more than 14 years career experiences in various major Oil & Gas EPCIC/EPC project. Currently, I serve for Dialog Energy Sdn. Bhd. as role of Senior Project Engineer (Mechanical & Piping). I am member of Board of Engineers Malaysia (with Reg. No: G179141A) since year of 2012. My main strengths and functions are mainly in mechanical engineering package and fabrication engineering with some project management capabilities. I am very cooperative person either individually or in a team, I assure you that willing to work in minimum supervision to complete the work or task given to me with considering the quality of work with safety and quality manners. You will find me as a well- organized individuality with excellent analytical and problem-solving skills. I thrive on new challenges, and my innovative approach to systems and improvement, along with my desire to learn, will prove to be a greatest asset to the industries.

Engineer

Greetings!! Briefly, I am Ashish Shrivastava, Independent Engineering Consultant (with group of freelancers) core being Piping stress with 15+ years of experience. I have done wide range of stress analysis in different sectors like Offshore/onshore, Marine, LNG/LPG, Petrochemical, Solar/ Thermal powerplants.    I take turnkey projects of pipe stress analysis  My client list has MNCs names like KBR, Technip energies, RINA-SPA along with long list of startups and small companies.  I would be happy if you can consider my profile for pipe stress analysis work that would like to outsource. I assure you this will help you reduce schedule and cost by 40%.

Engineer, Manager, Superintendent

Dynamic and accomplished chemical engineer with a wealth of industry experience, adept at navigating complex  challenges with poise and strategic logic. Proven track record in orchestrating multiple competing tasks to ensure  seamless project execution from conceptualization to completion. A progressive, technically-savvy leader with a  keen analytical mindset, dedicated to driving continuous process and procedural improvements that enhance  outcomes and align with organizational strategic goals.   Expert in cost and budget control, consistently delivering projects within financial constraints while maximizing  efficiency and value. Known for a collaborative approach to building and managing business relationships, adept at  resolving issues, translating complex information clearly, and fostering strong rapport across all levels, both  internally and externally, in traditional and remote distributed environments. 

Engineer, Manager, Translator

Hi Im Aiman .For your information,this year I am 29 years old. I graduated from University Technology Malaysia with a Bachelor Degree in Naval Architecture and Offshore Engineering.Currently , I am Project Application Engineer in Lutz Jesco East Asia Sdn Bhd since 2019 which has mostly been involved in Water Treatment Plant and chemical plants . Before this , I have been working in the oil and gas industry for 2 years as a project engineer at Petrico Engineering Sdn Bhd (2017-2019) of which which have successfully managed various projects throughout these years. I am aware that the company has been engaged in some exciting projects and initiatives in the industry in recent years. As you can see, I have been involved in similar work and I could greatly contribute to your company’s goals in the future. I am highly passionate to work in this industry. In addition, I also have high competencies in AutoCad, Solidwork,PV-elite and Maxsurf which will be an added value to your organisation.  Attached herewith is my CV and certificate for your kind reference .I really look forward to meeting with you and discussing my qualification in more detail Thanks

Engineer

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

A qualified and experienced inspector for more than 10 years specializing in Oil & Gas industry onshore and offshore. Have worked with a wide range of equipment, including piping and structure inspection, painting inspection, valve inspection and etc. Able to develop and review welding procedure specifications (WPS), qualifying welders tests (WPQT), inspection test plans (ITP), QA/QC documents/procedures review. Familiar in certain codes and clients' technical specifications which have helped me develop a keen eye for detail and the ability to identify issues and concerns that need to be addressed.

Inspector

Dynamic Project Manager with over 12 years of experience in mechanical and project engineering, specializing in project management, client liaison, team leadership, and design consulting. Mix experience in Oil & Gas (Offshore Platform, FPSO Marine & Onshore Plant), Data Centers Construction, Building Construction, & Waterworks with focusing on Engineering, Procurement, Construction, Installation, & Commissioning (EPCIC) for Mechanical, Electrical, & Instrumentation equipment supply. Proven track record in leading cross-functional teams, ensuring compliance with QA/QC standards, and delivering successful project outcomes. Skillful in technical problem-solving, tender management, and factory acceptance testing. Ready to leverage skills and experience to drive successful project execution at the senior level.

Engineer, Manager, Drafter / Designer, Supervisor / Technician

Domingo V. Granado Jr. is a seasoned Piping Designer and Engineer with extensive experience in high-profile projects for elite EPCM companies. Notable contributions include work on RasGas Exxon Mobil and QatarGas ExxonMobil LNG Process Trains with Chiyoda Corporation, GLNG Upstream Project with SANTOS Australia at Fluor Philippines, and Chevron's Bibiyana Gas Field with Foster Wheeler Thailand. At Mitsubishi Heavy Industries, he played a key role in major chemical projects such as ExxonMobil's and SABIC Gulf Coast Growth Ventures, North American Growth and Baytown Expansion Projects. His practical Field Piping Engineer experience includes Petronas Sabah Ammonia and Urea Project and Qatargas Exxonmobil LNG Project. Spearheaded facility engineering and project management for industrial and commercial projects with Achievers Business Group Inc.

Engineer, Drafter / Designer

A Graduate Metallurgical Engineering, Welding Inspector from B4T & IIW, ASNT Radiography Interpreter Level II. Having capabilities for preparing and reviewing QA/QC procedures, ITP, P&ID, welding inspection, material inspection and selection, measurement, welding procedure qualifications, welding performance qualifications, NDT, DT, QA/QC reports, interpretation film radiography (quality of film radiograph and quality of product) and familiar with international codes and standards such as (ASME, AWS, ISO, API, etc) and CAD software (AutoCAD). I am looking for opportunities to be able and contribute further to the industrial world to apply my knowledge and interested.

Inspector, Engineer

I’m a Civil Engineer with work experience of 33 years in project management, construction site supervision, detailed engineering and construction of civil works, heavy steel fabrication, load-out, transportation, erection works, offshore installation, heavy lift, brown field works, hook-up and commissioning in oil and gas industries specifically in offshore platforms and jackets, pipe racks, power plants, refineries, FPSO topside and other related works for civil works and steel structures. - Project engineering experience, supervising contractors' execution of engineering design, equipment and materials procurement, module fabrication, transportation, offshore installation, and civil works.

Engineer, Manager, Superintendent, Supervisor / Technician

I am a male 31 years old, my background education Bachelor of Mechanical Engineering study program, hard worker, fast leaner, self-motivated and good interpersonal skill, more than 9 years experiences industy such as : oil & gas fabrication, shipyard, mechanical manufacture & civil construction. Specifically for Piping Engineer 3 years as Piping Engineer and more than HVAC Engineer 1 years also 7 years as design and drafter.   During my time in the engineering department, I have skills in analysis, calculation, simulation moreover design modelling and drafting. In my work I am used to using CAESAR II software for (Pipe Stress Analysis), Autocad Plant 3D for (Piping & Equipment Modelling), Solidworks for (Mechanical Design) and finally Autocad for Drafting.   I am confident in responsibility such as : piping analysis dan simulation, piping modelling and shop drawings, also create Material take Off (MTO) and Bill of Material (BOM). I also can be create design and simulation mechanical equipment include start from shop drawing until report.

Drafter / Designer, Engineer

Sr.Mechanical Engineer | Project Engineer | Sr. Project Engineer | Field Service Engineer | Assistant Project Manager | Sr.Piping Engineer | Boiler Engineer Bachelor in Mechanical Engineering (Hons), with approximately 5 years of working experience recently with Technofit Sdn.Bhd under Operation & Maintenance. Strong knowledge in Plant Operation and Maintenance (O&M). Specializing in Mechanical Engineering, Project Management and I handled major responsibilities such as Project Management, Documentation Control, Scheduling, Power Plants Maintenance Projects, EPCC Project Management, Technical input for online power plants. A skilled communicator with the ability to lead teams to accomplish dedicated task successfully.

Engineer, Manager

I have strong knowledge, Leadership & soft-skill in the QA/QC scope of work and also professional experience in oil & gas offshore / onshore like fix platform (Jacket & Topside), FPSO Topside module, Petrochemical, Refinery unit, Power plant, Fabricator, Bridge with welding connection, Structural, Piping, Pipeline spool (include Riser pipe) & Yard Fabrication withvarious position Asst. QC Inspector, QA/QC Inspector, QC Welding Inspector, QA/QC Engineer, QA/QC Coordinator, Deputy Quality Manager, Chief QA/QC or QA/QC Lead. I am Certified & qualified for CSWIP 3.1 Welding Inspector, Bachelor applied science in Welding Engineering, ASNT NDT Level II in Dye Penetrant Testing, Magnetic Particle Testing & Radiographic Testing Film Interpreter. Should be to rest CLIENT Specification, Code / Standard, Quality Manual, Work Instruction / Method statement. Our team achievement on the previous project is speed up document, especially NDT report must be ready at the CLIENT before PJSM (pre-job safety meeting) and then 3 times of erection can do it without backlog / bottle-neck document in QA/QC Department.

Inspector, Engineer, Other, Supervisor / Technician

I am working as an Aramco Approved QC Manager with CAT Group at URMP Pipeline Project, Jaffurah, Saudi Arabia. Having more than 17 years of experience with different organizations. I am having Accredited Project Manager, ISO 21500:2021, 9001:2015, 45001:2018, CSWIP 3.1, ASNT NDT LEVEL-II PAUT/ToFD/RT/MT/PT techniques and Six Sigma Black Belt Certification. Most of the experience in QA/QC & Execution of projects. I have a sound grip on International Standards and Codes used to make sure the procedures/policies/standards & quality in Oil & Gas Sector projects.

Manager

I Have less than 5 Years of Experience as a Welding Engineer and Quality Control at Marine and Oil and Gas Industry. I have Qualification for Welding Inspector with International standard (CSWIP 3.1) and I'm Familiar with International standard or code such as ASME VIII, ASME IX, AWS D.1.1, API, ABS Code, DNV Code etc. With a

Inspector, Engineer

17 years of Project & Construction Management experiences in oil and gas industry for both Greenfield/Brownfield onshore and offshore projects. 

Other

* QC Inspector (Structural, Mechanical & Piping) for Gas Turbine Compressor Package; Medco E&P Natuna; FPSO Marlin Natuna Forel Baronang Project * Chief QAQC for Oil Pipeline Replacement size 4" to 28", 350 Km Minas Duri Dumai; PGN Solution: Chevron (PERTAMINA) Rokan Project * Welding Inspector for installation 10" pipeline 1 Km ORF Petronas to SAKA ORF; PGN Solution; Bukit Tua Project * QC Engineer for Installation 42" pipeline 15,6 Km, Kp26,5 to ORF ENI; Agia Pertiwi; Lean Gas Project * Project Manager for Certification for Offshore Platform Subsidence Project; DNVGL; Yadana Project (Myanmar) * Residence Inspector for Certification for Offshore Platform Living Quarter & Flare; DNVGL; Great Bongkot South Project (Thailand) * Residence Inspector for Inatallation 28' & 32" of Pipeline 450 Km; GL Nusantara; South Sumatera West Java Project

Engineer, Inspector, Supervisor / Technician