Installation freelance

I am a Bachelor of Science in Instrumentation and Control Engineering graduate from Batangas State University, Philippines batch March 2004. My 16+ years experience in the Power Generation (Renewable-Binary Geothermal), O&G, Sulphur Granulation / Storage / Shiploading, Petrochemical, Water Desalination, and Construction/Commissioning/Maintenance Industry has provided me with the opportunity to enhance my overall knowledge of a variety of facets and the workflows in Engineering, Construction, Completions/Commissioning, Maintenance, and Operations. Being a versatile Instrument Engineer is the key to any successful and safely executed project and working in challenging environments has provided me a unique understanding of the requirements necessary to deliver great results in a safe productive manner. 

Engineer, Inspector, Supervisor / Technician

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

Subsea Engineering Management and Expertise My career starts in 1981 by joining Comex SA a diving-subsea Company based in Marseille-France. I follow then a long international career as subsea engineer/manager to design, construct, and install Oil & gas production fields world-wide. I have been working for various recognized subsea Companies contracted by major offshore Operators. My professional skills and strength stand in my capacity to: • propose innovative and cost-effective technical solutions, • lead efficiently large engineering teams, • bring challenging project objectives to success.

Manager

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.

Engineer

Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc… 

Manager, Superintendent

6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.

Engineer

HSSE Manager | HSE Engineer | HSE Specialist | HSE Training Coordinator Bach, Degree in Industrial Engineering. An HSE visionary & leader, having 20+ years of rich experience in providing management, leadership and technical oversight for Health, Safety, and Environmental initiatives for multi-million USD Construction/Projects, Plant Operations/Facilities Operation, Security, Production Facilities and Power Plants. Enabling organizations to become their best through HSE process optimization and improvement. Drove project safety excellence as well as optimization and execution methodologies.

Manager, Superintendent, Engineer

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

A passionate Project Engineer/Structural Engineer with more than fifteen (15) years of work experience.

Engineer, Manager, Other

I have more than 5 year experience with a strong technical background and demonstrated success in commissioning integration, installation, maintenance, and repair of a wide variety of Electrical, mechanical and hydraulic systems related to WTG's. , I have demonstrated strong problem-solving skills and the ability to work in high-pressure and challenging working environments. My responsibilities varied throughout the commissioning, maintaining, installation and testing of highly sophisticated electrical systems. In addition, Ensuring that all activities complied with quality standards and examining installation of numerous electrical equipment, I have been able to successfully identify engineered resolutions to recurring electrical issues. Furthermore, I have gained an extensive exposure to leading teams and training members such that their competencies are in-line with the needs of the organization.

Engineer

My name is Saqib Ali, and I hold a degree in Mechanical Engineering with 05 years of valuable professional experience. During my career, I had the privilege of contributing to significant projects, including the greenfield project at Nishat Sutas Dairy and a brownfield project at COCA-COLA Beverages PAKISTAN(CCI). In these roles, I played a pivotal role in managing utility and process piping projects, overseeing the installation of Piping, valves, Pumps, and Plate Heat Exchangers (PHEs). My expertise extends to creating comprehensive 2D and 3D drawings, Hydrotesting of piping, piping, enabling precise project execution as per engineering specifications. I have excellent skills of Solidworks and AutoCAD and good knowledge of International standard (ASME,ISO,ASTM,API ). I am enthusiastic about exploring new opportunities where I can leverage my skills and experience to make meaningful contributions.

Engineer

My experience as a QC E&I Inspector involved rigorous inspection and testing of electrical and instrumentation systems across diverse projects. I meticulously ensured compliance with industry standards, specifications, and client requirements, contributing to the successful completion of numerous projects on time and within budget. My expertise encompasses a wide range of tasks, including:

Inspector, Supervisor / Technician

I'm Scientist, Pipeline and Engineering in Specialist Structure/Construction of Body with H-Beam, Plate and Weld: 1. Pipeline Engineer: Welding Engineer & Field Joint Coating   2. Mechanical Engineer in Structure of Body: Aerospace, Submarine/Naval Architect, Hangars, Storage Tank, Vessel, Over Head Cranes, Pipe Rack, Shelter, Bridge and Girder. STRENGTHS:   Adaptable, Team-Player, Goal Oriented, Optimistic and Managerial Skill   Achievement: I am Indonesian who first discovered the rubber coating chipped in Project Pipeline in Sumatera 370KM from Belawan / Medan to Arun / Aceh and Pipeline in Jakarta MKMT (Muara Karang-Muara Tawar) 30KM from Muara Karang to Muara Tawar coral that has never been detected / Inspection in the project pipeline conducted by PT. Pertamina (circa 1980s), caused by pipes that are already on standby in the above Weld Joint longer to be influenced by several factors such as the effect of hot weather, the cold night rain resulting in chipped rubber joints Coating

Engineer, Manager, Inspector, Superintendent

Seasoned HSE professional with several years of experience in the oil and gas industry. Skilled in implementing and auditing ISO management systems, ensuring compliance and operational excellence. Extensive experience across multiple disciplines, including T&I campaigns, marine operations, subsea projects, inspections, and NDT. Proven track record of working with various operator OPUs, driving safety and efficiency in high-risk environments.

Other

Dedicated and focused Senior Mechanical Technician with extensive expertise in mechanical maintenance and work preparation in the oil and gas sector. Seeking a challenging role where to supervise and coordinate mechanical tasks and preparing work procedures will contribute to optimizing operations and maintaining equipment reliability.

Supervisor / Technician

    I am a young, energetic, well-motivated professional. I have excellent Technical skill and believe in participatory learning process and approach. I can maintain the technical matters relating to Mechanical, Civil, hydraulic and Industrial mechanics. I have done my work with Saudi Aramco & Dar Petroleum. I am having ability to function in a multicultural environment, to lead and motivate multinational teams and familiarity with cost management processes.  Assuring of my best services at all 

Inspector, Engineer, Supervisor / Technician

I am Dair Djuwari Ngadenan experiences in drilling as Chief Mechanic more than 15 years

Supervisor / Technician

A mechanical engineering graduate seeking career opportunities as a field engineer in the upstream oil and gas industry. Equipped with a quick ability to solve problems, able to adapt to new systems and multitask under intense pressure. Keen to learn and contribute to a company's growth by adopting leadership skills and current international working experience.

Engineer

I am a dedicated professional draftsman with a total of 20 years of work experience, I have amassed 16 years of extensive experienced in the oil and gas industry, specifically in transportation and installation operations. My career includes impactful contributions at renowned offshore installation companies such as Barmada McDermott (a Malaysian subsidiary of McDermott Far East) and Global Offshore Malaysia (a Malaysian subsidiary of Global Industries). My proficiency shines in preparing meticulous AutoCAD drawings and sketches for various installations, encompassing jackets, modules, bridges, umbilical, and pipelines.

Drafter / Designer