Construction freelance

A petrochemical industry expert with more than six years of experience who has advanced knowledge in designing pipe racks, equipment structures, shelters, miscellaneous stages, and platforms using different international codes and standards. Acts as a global support engineer for structural engineering discussions with client

Engineer

Graduate of Bachelor of Science in Electronics & Communication Engineer with the following skill summary. Continuous experience in FEED, Detail Design Engineering, Construction & Commissioning of Greenfield and Brownfield projects for Oil & Gas, Petrochemical, Power and Telecommunication industry. Specializing in Instrumentation & Control which requires both knowledge of industry practices/standards, and the ability to use computer software for preparing deliverables. Has knowledge in conventional instruments, Foundation Fieldbus, DCS, SIS, F&G, Electrical and Telecom systems. Work experience includes; Commissioning Engineer (Pre-Comm/Comm), Engineering Support for Construction, Design Engineer/Designer, Checker for Design Deliverables. Provide Technical assistance in Instrumentation & Automation and Telecom device installation, mechanical completion testing, precommissioning, commissioning and troubleshooting. Factory Acceptance Test and Site Acceptance Test of DCS, FGS, SIS and Vendor Packages. Subcon/vendor document review and coordination during construction. Additional experience includes involvement in project management, scheduling and procurement.

Engineer, Drafter / Designer

Over 40 years of experience as QA Manager, HSEQ Manager and Fabrication Manager with both operator and EPCI contractor in onshore and offshore oil and gas projects including, LNG plants, processing facilities, pipeline procurement, pipelines fabrication and installation, jacket and deck fabrication and installation and large-scale civil engineering projects. Broad based experience in development, review, approval and implementation of quality management systems, safety management systems, emergency response, site safety management, construction and technical safety management, asset integrity management, facilitation of workshops for lessons learned, risk management and management of change, developing scope of work and management of sub sea fabrication contracts, development of scopes of work and management of consultants for formal safety cases, development of scope of work and management of independent verification body contracts, certification contracts, marine warranty surveyor services contracts, procurement of pipeline materials and equipment, landfall sites management, company site representative, construction quality management, third party inspection contracts, quality control and non-destructive testing.

Manager

Bachelor’s degree professional with over 15 year’s profile of generation top quality work performance and delivering successful results within lively business scenarios. Proven expertise in handling overall supply chain management, operation and marine with EPCC fabrication and manufacturing background. Possess exceptional negotiation, admirable client convincing and excellent communication skills. Keenly interested to explore a more challenging work profile to utilize gained experience and developed expertise and leadership attributes.  Highly motivated, versatile and workaholic . With over 10 years experienced in the Supply Chain Management which includes from Tendering, Procurement, Logistics & Warehousing process. Delivering the task base on the timeline or schedule given with zero LTI. Passionate about empowering people to work towards their potential.   

Manager

Alfi is a highly motivated structural engineer who has been experienced in structural engineering and road and bridge engineering for over 5 years. He’s honed a blend of leadership, communication, analytical, and interpersonal skills. He was willing to learn and perform various tasks for company success and valued the importance of data-driven decisionmaking. He is looking for a new challenging experience that develops his skill sets, especially planning about structural engineering, roads, and bridge engineering.

Engineer, Drafter / Designer, Supervisor / Technician

Accomplished Senior Instrumentation and Control Systems Engineer with over 15 years of experience executing and leading diverse EPC projects, including, Oil & Gas, Water Treatment Facilities, and Infrastructure projects. Skilled in translating project strategies into detailed execution plans, and procedures. Demonstrated leadership abilities in delivering small-scale to large-scale projects domestically and internationally. Expertise spans proposal, execution, automation, control, analyzer, and fiscal metering systems

Engineer

Experienced professional with over 15 years of experience in piping design and plant layout. Proven track record in feasibility study, FEED, detailed engineering, fabrication, construction and installation in the oil & gas processing industry. I have successfully worked on a variety of offshore and onshore projects. During my 11 years in offshore projects, I have been involved in the FEED, detailed engineering, EPC and EPCI phase of Wellhead Platforms (WHP), Riser Platforms (RP), Floating Production Units (FPU), and Floating Production Storage and Offloading (FPSO) systems. Additionally, I have 4 years of experience in onshore projects such as LNG plants, oil refineries, and gas processing facilities for the EPCI phase. My expertise extends to international oil & gas industrial codes & standards, piping design, plant layout assessment (i.e. operability, accessibility and maintainability analysis), fabrication, construction, mechanical handling assessments, hook-up philosophy, and transportation & installation (T&I) philosophy. Strong analytical abilities and a commitment to continuous learning in a technical environment. Equipped with a foundational understanding of engineering principles and hands-on experience with leading teams in multiple professional and organizational settings. Problem-solving skills and collaborative attitude make me well-suited for roles that require high-level technical expertise. Knowledge of industry standards and regulations, as well as proficiency in using various engineering software such as AutoCAD, Navisworks, Smart Plan Review, Aveva Review, E3D, SP3D, Excel, Word & PowerPoint and project management. Prepared to drive efficiency and innovation in complex piping systems.

Engineer, Supervisor / Technician, Manager, Superintendent, Drafter / Designer

Leverage my technical acumen in Civil Engineering industry combines with Project Management skills to drive efficacious projects; unwavering focus on quality, safety, timely completion and sustainability standards. In a dynamic and collaborative work environment, I aspire to be a driving force behind the successful realization of projects, fostering an atmosphere of innovation, teamwork and continual improvement.

Engineer, Inspector

Experienced Piping Engineer with a demonstrated history of working in the oil & energy industry. Professionally skilled in Piping Layout and Design, 3D modeling, AutoCAD, Construction, Engineering both Greenfield and Brownfield Projects and Project Management.

Drafter / Designer, Engineer

Executive, Project Material Management with experience in material management process, especially for Electrical and Instrument discipline. Skilled in managing supply discrepancy notes (SDN) and material deficiency report (MDR) for project materials, and involved in reinventing supply chain management (SCM) with a focus on procurement best practices and value creation.

Other

 I'm Nino Nieves, a Filipino. With over 18 years of extensive experience in the erection, commissioning, and implementation of instrumentation systems across diverse industries, I am confident in ensuring optimal performance and reliability of complex systems. My strong background in project management and technical execution positions me to make significant contributions to your team and drive successful project outcomes. Throughout my career, I have led numerous projects that demanded a comprehensive understanding of instrumentation and control systems. I have expertly managed the installation and commissioning of advanced instrumentation equipment, consistently ensuring compliance with industry standards and regulations. My proficiency in data acquisition, process control, and system integration has enabled me to troubleshoot effectively and optimize processes, resulting in enhanced efficiency and minimal downtime. Beyond my technical skills, I excel as a proactive communicator and collaborator. I have forged strong partnerships with multidisciplinary teams, including engineers, technicians, and clients, to deliver projects on time and within budget. My ability to articulate complex technical concepts has fostered productive working relationships and facilitated successful project execution.

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

Over 19 years of wide-range and multi-functional experience in Piping Design and Engineering. From FEED to Detail Design, to Construction and to Pre-Commissioning/Commissioning phase of a project, both greenfield and brownfield. Majority of experiences were involvement in Design and Build Projects in different industries such as Oil&Gas, Petrochemical, Refineries, Pharmaceutical, FPSO, Mining and Waters. Comprehensive knowledge of applicable Piping codes and standards. Actual involvement in Piping/Pipeline checking and site walkdowns including preparation and clearing/monitoring of punch list items. Broad experience in production of high-quality engineering deliverables such as P&ID, Isometric drawings, Fabrication drawings, General Arrangement drawings and Detail drawings using Spoolgen, AutoCAD and Microstation. Hands-on experience in extraction of Piping Material Take-Off both from 3D models and/or from 2D reference drawings. Extensive experience in utilization of 3D software, both modelling and basic administration, such as AP3D, S3D, PDS, E3D, PDMS, Plantspace, CADworkx, Navisworks and SPR. Experience in Piping Material Selection and development of Piping Material Specifications. Hands-on involvement in design calculations such as Pressure-Temperature rating, Pipe wall thickness and Temporary test blind thickness. Hands-on involvement in Technical Bid Evaluation and preparation of Material Requisition for Piping items. Hands-on involvement in preparation of datasheets for Piping items. Experience in Pipe Stress Analysis by CAESAR II including report interpretation and evaluation. Actual participation in constructability and design reviews, HAZOPs, and Clients / other stakeholders’ coordination meetings.

Drafter / Designer, Engineer, Supervisor / Technician

Civil/Structure Engineer with 10+ years of experience designing and managing projects for a variety of clients from FEED stage, DED stage, construction stage, pre-commissioning stage, until mechanical completion. Skilled in leading teams and resolving technical issues. Create a positive and productive work environment by communicating with team members and interdisciplinary to mitigate potential concerns.   Provide structural analysis following design basis such as structural building, non-structural building, or non-structural component building and designed in accordance with codes or specifications. In charge of developing and preparing general specifications and construction specifications for civil structures and buildings. Generate the engineering concept, work volume breakdown, specification, and schedule during the FEED (Front End Engineering Design) stage.   Review Material Approval Request proposed by subcontractor to meet general and construction specifications, including following up on the delivery schedule of material. Assist the proposal team with requests for quotations for commercial purposes. Coordinate and identify technical queries, deviations, and alternatives to be submitted by the subcontractor. Prepare and coordinate with the QC Department for the ITR or inspection check list. Perform functional tests of indoor firefighting systems, for instance, one of the completion requirements before handover to the client

Engineer

Having work as a Senior Instrument Designer/Engineer, my experience has thoroughly prepared for the role Instrument Engineer Firstly, my in-depth knowledge of creating detailed designs for instrumentation layouts, design & Engineering has laid a strong foundation in meeting complex engineering specifications, crucial for the role you are offering. Secondly, I have honored my skills in utilizing advanced design software to produce high-quality schematics and layouts, ensuring precision and efficiency in the project execution. Lastly, my leadership role allowed me to work closely with cross-functional teams including electrical, mechanical, piping and civil engineers, enhancing my ability to collaborate and ensure cohesive project development.

Engineer, Drafter / Designer, Supervisor / Technician

I am active and dynamic, trustworthy, able to work individually or in teamwork, self-motivated, initiative, and willing to work smart. My experience working at Eni Indonesia Muara Bakau BV on The Floating Production Unit Jangkrik at Makassar strait. My previous work with LNG project at Joint Operating Chiyoda Saipem Tripatra SAE on Tangguh LNG Train 3 Expansion Project as an S3D Piping Design Engineer. I believe that my educational background and experience as well as my abilities and skills could accommodate your needs and would be an asset to your company.

Drafter / Designer, Engineer

25 years of professional experience on various projects in various environments, mainly Petrochemical, Oil and Gas, Offshore & Onshore, Mining and Infrastructure including detailing, producing general arrangements drawings for concrete and steel structures, pipe supports, pipe racks, pipe bridge, vessel skids, vessel supports, pilings, foundations, water retaining structures, MTO and most associated aspects of work. Also produced Reinforced Concrete details and structural fabrication drawings for the various elements associated with the above and heavy industrial engineering. Work carried out has been produced in the design office and plant based environment using the latest CAD softwares. Perform site surveys and inspection.

Drafter / Designer

I'm very well experience in design engineering and project execution types of projects.

Engineer, Drafter / Designer, Superintendent

10 years of experience in a multinational engineering company as an Electrical and Instrumentation designer providing engineering design for both electrical and instrument construction of various power plant type, as well as support at project site which involves design coordination and assist supervision for installation works.

Experienced in the field of engineering, design and construction as Civil Structural Engineer/Designer. Proficient in working with Design, 3D modelling and 2D design drawings for Civil, Structural from preliminary concepts, sketches and other data into detailed design as per Client and Company standard. Knowledge in Design, Estimate, Interpreting and inputting design and sketches into 3D models with the aid of STAAD Pro, STAAD RCDC, RAM, Staad Foundation Advance, PDMS, E3D, AutoCAD, Tekla, Revit & Sketchup as design tools. Extensive onsite experience as Field/Site Engineer gained from Industrial and Manufacturing Plant Construction projects.

Engineer, Drafter / Designer

I have gone through experiences together with Project Management Team, QC Inspection Team and Production Team for 26 years in Oil and Gas Construction and Fabrication which, specialize in structural, piping, mechanical and architecture discipline. HIGHLIGHTS  Acquired 26 years' experience inclusive ofhands-on welding supervisory as well as manage various aspects of QA/QC inspections and verifications in the structural and Oil / Gas industrial fabrication / construction and hook-up commissioning.  Six (6) years of experience in the field of QA/QC Inspection and sixteen (18) years of experience in the field of Construction (Production).  Two (2) years of experience in the field of Hook-up and commissioning.

Superintendent, Supervisor / Technician, Other

Background 20 years' experience as Design, Constructions, Management, Supervision & Coordinator for Multiple Scale project. Experience on FEED, Design Engineering, Material Approval & selection, QS, Contact Management, Vendor Coordinator, Manpower Assessment, Project Budgeting, Project Planning & monitoring & Reviewers. Experience SAP, CCMS, MOC, HAZOP, Permit, Lidar/Sonar application, CAD, PDMS, E3D, Naviswork 3D Review & knowledge in engineering standard, API, ANSI, ASME Experience with FAT, SAT, ITP & QC inspection, Engineering Design & Consultant, Site Visit, Offshore & Onshore transportation procedures, Project Fasilitator & Advisor. Experience in Building project (Road, Office, Laboratory, Substation, Hall, Workshop, Sludge Pounds, Bridge, etc). Offshore & Onshore Platform, Living Quarter, Jacket, Piling method, FPSO, Refineries Plan, General stations, WWTP, Flowline system, Pipe rack, etc.

Engineer, Manager, Superintendent

Accomplished Electrical & Instrument Designer with over six of progressive experience at REI Process Pty Ltd., New South Wales, Australia. Specializes in meticulous preparation and revisions of critical instrumentation documents and detailed drawings. Demonstrated ability to coordinate multidisciplinary teams, refine design specifications, and deliver precise documentation. Adept in managing Electrical and Instrumentation Documentations. Holds a bachelor’s degree in Instrumentation and Control Engineering from Batangas State University, complemented by certification in Instrumentation and Control Engineering

Drafter / Designer

Have experience as Associate Production Engineer E&I at McDermott for QatarEnergy LNG Module, review document, support installation after fabrication and helping construction team at field. Electrical Engineer RDMP Balikpapan JO, review SLD, LV and MV Switchgear, motor control center, cable route and tray for Pertamina Balikpapan Refinery Project. as Electrical Project Engineer at APRIL Group, Responsible for managing the team of contractor, Monitoring and Supervition, Handling Contractor, Daily check manpower. Previously as Electrical Inspection Engineering at Pertamina Refinery Unit II Dumai. I also participate in work activities in the field such as inspection, maintenance, meetings and commissioning that make me accustomed to discipline, working under pressure, individually or in teams.

Engineer

I am a versatile person who can offer professional help to your business. You can count on both my 3D modeling and 2D drawing skills. I have a knack for understanding project execution and workflow related to design activities for both brownfield and greenfield front-end engineering. I have strong working experience in detailed engineering projects in the oil and gas and mining industry using different software tools.

Drafter / Designer

I am a NBOSH certified HSE professional with over 20 years of diverse background.

Manager, Superintendent, Supervisor / Technician