Construction freelance

30 years working experience in Oil n Gas Offshore, Onshore and Marine Industry. Role and responsibility in Managing Team as team lead, Manpower, Cost Control, Project Budget, Planning. Handle Project from Feed - Detail design engineering - Procurement - Construction Commissioning, (EPC).

Louis A. Ogaard, Ph.D. 60267 Morgan Lake Rd. La Grande, OR 97850 Phone: 786-373-3901 email: lou.ogaard@yahoo.com [lou.ogaard@yahoo.com] Linkedin link: https://linkedin.com/in/louis-ogaard-4a4072128   Dear Sir or Madam:   I wish to be considered for positions germane to my training and background.   I administered a federally-funded (P.L. 95-87, Title IV) environmental restoration program for the State of North Dakota for over twenty years. The annual budget for this program was two million dollars. As Director of the Abandoned Mine Lands (AML) Division, I held public meetings to discuss planned reclamation with a variety of constituencies, prepared the Division budget and defended that budget before State Legislative Committees. I drafted federal grants that included National Environmental Protection Act Environmental Assessments (EA’s) and acquired requisite permits (Section 404) from the U.S. Army Corps of Engineers to disturb extant wetlands. I assisted staff to develop cost estimates for our construction projects. As Chief Procurement Officer I solicited bids from private contractors and drafted contracts for the reclamation work. Procurement policy and procedures were patterned after the Federal Acquisition Regulations (FAR). I instituted the use of trees, shrubs and native grass plantings for wildlife habitat and wetland restoration for waterfowl. I authored several articles that dealt with freshwater wetlands. Several of the mines reclaimed under this program were radioactive due to mining for uranium content in the coal.   I supervised a professional staff of environmental scientists and engineers using a team management approach and coordinated the execution of multiple projects during our construction season. I was the risk management coordinator for my State agency, and I worked on the development of emergency response protocols.   I dealt with the news media on many occasions and coordinated reclamation activities with university research efforts. I co-authored a methods text to assess the success of revegetation on reclaimed lands. This tome, currently used by the coal industry, addresses reclamation of rangeland, cropland, pastureland, woodland and wetlands. I authored several other articles dealing with freshwater wetlands and conducted primary botanical research on sites reclaimed under the program I administered.   I authored spreadsheet macros and relational database programs to track contract and grant expenditures. I was president of a computer consultancy that specialized in hardware sales, Local Area Networks and customized database programming.  I also held the position of Adjunct Professor of Mathematics for several years at Bismarck State College where I taught computer science and developed course curricula in this subject in an adult education program. Classes included students with diverse cultural and economic backgrounds. I have several years of experience on the Internet, authored my division’s web page at the North Dakota Public Service Commission and populated the entire agency’s web site using Dreamweaver MX. I authored a Windows-based database for CEHMM to track all scientific data collected from open raceway algae ponds.     I administered an R&D program to convert algae to biofuels and served as permit compliance manager. I supervised a staff of Ph.D. scientists, engineers and technicians in this effort. CEHMM had a fully integrated facility to produce algae oil which could be converted into biofuel. I served as Program Manager for the Natural Resource Management program at the U.S. Army’s Dugway Proving Ground in Utah.   Most recently I worked for Avangrid Renewables in Portland, Oregon. I handled permitting nationwide for the construction unit. I resigned from there and became an environmental consultant in Latin America.   I live in Bolivia and have for ten years on and off and hold dual citizenship in Bolivia and the United States. I am available for immediate employment.    Sincerely,     Louis A. Ogaard, Ph.D.

I am sure my ability skills and experiences will enable to do any kind of Engineering & Business Development and Sales Job.

Accomplished Mechanical Engineer with over a decade of experience in quality control, construction management, and mechanical inspection across various high-profile projects. Proven expertise in team leadership, project management, and problem-solving. Demonstrated ability to manage and oversee complex construction activities, ensuring adherence to quality standards and client specifications. Skilled in advanced welding technologies and inspection techniques, with a strong background in HRSG erection and NDT processes. Holds a Bachelor's Degree in Mechanical Engineering and numerous certifications, including PMP, NEBOSH, and CSWIP 3.1 Welding Inspector Level 2. Fluent in English and Arabic, with a solid track record of delivering successful projects in diverse environments .

Engineer, Manager

Experienced structural designer with 20 years of expertise in offshore oil & gas steel structures. Skilled in team leadership, design checking, 3D modeling, and engineering proposals. Proficient in Front End Engineering Design (FEED) and multidisciplinary projects involving structural steel, site preparation, and 2D detailing for various sectors, including oil & gas, refineries, petrochemical plants, power plants, and commercial and industrial buildings. Expert in the method study of steel structures, such as jackets, living quarters, pipe racks, and equipment supports. Experienced in managing large-scale projects, material take-offs, fabrication drawing reviews, sea fastening, engineering proposals, lifting studies, fabrication sequences, and yard layout planning. Proficient in Tekla Structures, MicroStation, SP3D, E3D, SYNCHRO 4D Pro, and AutoCAD. Well-versed in international codes and standards, with strong skills in 3D modeling, drafting, estimation, and material control. Proven ability to resolve complex issues effectively.

Engineer, Drafter / Designer

Civil engineer

Drafter / Designer, Engineer, Inspector

I am a new graduate from the Putra Indonesia University YPTK Padang civil engineering study program graduating with a GPA of 3.28, a person who is disciplined and has a leadership spirit that never gives up.

Supervisor / Technician

I'm electrical engineering experience 14 years. I'm familiar in EPC projects.

Engineer

Hi  Gd day. I am Sakthi from Singapore. Have oil and gas experience in Quality/Construction and Commissioning experience in the area of Mechanical/HVAC/LQ Architectural for 15 years and overall Engineering experience for 24 yrs. Attach my CV for your perusal. Kindly review and let me know for further discussion if you impress with my qualifications and experience 

Engineer, Inspector, Superintendent

* ➢    Having 18 years of experience in Oil & Gas Field in FSO, Semi-Submersible Drilling Unit, and FPSO Project as E&I Engineer, Service Engineer, Construction Electrical Supervisor, Commissioning Engineer, ATEX, EEHA and IEC (Hazardous) Certified Inspector, Lead Commissioning Technician, Senior Commissioning Technician * ➢    Strong knowledge for Electrical & Instrumentation of Installation, Inspection, Pre-commissioning and Commissioning as per international standard IEC, IEEE, NEC and ABS Rules and DNV for MODU, MOPU. * ➢    Installation, Inspection and Testing of Electrical & Instrumentation and Communication Equipment’s as per Client and DNV& ABS requirement for FPSO, and Semisubmersible for Marine and Process Inspection. Specialized inspection at Top Side in FPSO, Drilling of DNV& ABS Class for Hazardous Zone Area for Zone 0, Zone 1, Zone 2 Areas. * ➢    Review Construction Drawing, Installation, Testing and Commissioning, Excellent Reporting, Quality of work and performance of assigned duties. * ➢    Seeking a challenging position in Electrical Engineering field, that would leverage my knowledge and experience in Power Systems with use of my strong Organizational/ Technical skills. * .

Inspector, Engineer, Supervisor / Technician

I am Yen Lin. I have more than 15 years of experience in process engineering with a Japanese company based in Malaysia. During the tenure, I have abundant experience and knowledge in FEED and detailed engineering from PFD, PID preparation, PSV sizing, line sizing, safety studies, hazardous area classification, dealing with licensor, sub-contractors and the list goes on. Currently, I am a stay at home which would like to continue working remotely in the engineering field.

Engineer

My name is Mohamed Abd Elaziz, and I am an Instrument and Control Engineer with 15 years of experience in the oil & gas industry. Currently, I serve as senior I&C engineer at Badr Eldin Petroleum Company in Egypt, where I have played a pivotal role in numerous EPC projects. Throughout my career, I have developed extensive expertise in field instrumentation, electrical equipment construction, QC inspection, and commissioning. I take pride in my ability to ensure the successful execution of projects from conception to completion, adhering to the highest industry standards. I am keen to explore opportunities where my skills and experience align with your esteemed company’s requirements. I have attached my resume for your review. Thank you for considering my application. I look forward to the possibility of discussing how my background may contribute to your team.

Engineer, Inspector, Superintendent

To shortly introduce myself, my name is Md. Jual Afsar and Graduated from Sonargaon University, Dhaka. Technology in Mechanical Engineering. Also Post Graduated from Southeast University Dhaka ,MBA-Master of Business Administration (Major MIS) of The Southeast Business School I am working with Suez fence in 500 MLD Ganadharpur water treatment Plant under Dhaka wasa project . Dhaka Bangladesh, Recently I have completed Dhaka Metro RAIL Project under DMTCL with NKDM ASSESSOCATION under employee DDCL Dhaka Bangladesh    I AM WRITING TO EXPRESS MY INTEREST IN THE POST OF APPLICATION APPLY FOR QA/QC MECHANICAL INSPECTOR . I AM CONFIDENT THAT MY TECHNICAL KNOWLEDGE AND RELATED EXPERIENCE CAN CONTRIBUTE TO YOUR TEAM.     I would welcome the opportunity to discuss how my expertise could contribute to your company , you can find my CV and references. If you have any questions, you can reach me by phone: +8801823465561 and e-mail: Juwel.me95@gmail.com [Juwel.me95@gmail.com].   Thank you for taking the time to read my application and for your consideration! -- -- Best Regards,   Md.Jual Afsar QA/QC Mechanical inspector  B.sc in Mechanical Engineer, MBA Management , NDT Level II (UT,RT,MT,PT,VT)    

Inspector, Manager, Superintendent

I am an experienced civil construction professional with a background in oceanography. I am skilled in managing technical documents, coordinating with subcontractors, and ensuring compliance with project requirements. With roles at PT Doosan Heavy Industries and PT Hyundai Engineering, I have managed document control for large-scale industrial projects, collaborating with international teams, preparing technical reports, and maintaining accurate records. My strengths include advanced analytical skills, attention to detail, and a proactive approach to problem-solving. I am proficient in tools like Microsoft Office, AutoCAD, and ArcGIS, and fluent in both Indonesian and English.

Engineer

#####

Engineer

An accomplished professional with the merit of executing prestigious projects of large magnitude within strict time schedules, cost & quality; targeting to express potential in strategic level roles in Project Management/ Contract Management with an esteemed organization.

Manager, Inspector, Engineer, Superintendent, Other

* Understanding for electrical construction, installation, testing and inspection * Understanding for instrument construction, installation, testing and inspection * Understanding code and standard for electrical and instrument system (IEC, NEC, NFPA, ANSI, API, NEMA, BS) * Electrical Design Engineer (cable sizing, breaker sizing, load calculation, etc.) * Understanding Electrical, Instrumentation telecom installation and inspection at hazardous area

Inspector, Engineer, Superintendent

I am Civil Engineer with Professional Experience of 3 years & 10months in Execution of WTP Structures,Intake Well & PumpHouses

Engineer

I am graduate from the Ocean Engineering Department, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia. I am eager to learn new things, especially in the oil & gas industry because during my college I learned about offshore structures. I’m interested about offshore structure. My goal, I am motivated to improve my skills and experience to become a professional. I hope to work as a structural engineer in the field of offshore structure fabrication in the future.

Engineer

I am an Ehs personal

Superintendent

Experienced Health Safety Environment with a demonstrated history of working in the oil & energy industry. Skilled in ISO 14001, Gas, Petroleum, Power Plants, and Pumps. Strong human resources professional with a BSC. focused in Marine and Offshore Engineering.

Engineer

I am a dedicated, hardworking, and proactive person with a strong background in Petroleum Engineering, Petrochemical Project and Management construction. I feel excited to participate in activities that demand leadership, teamwork, and analytical thinking. I am currently looking for an opportunity to utilize my technical skills in a challenging working environment and become a valuable asset to the company that I work for.

Manager

15 years of extensive experience in various construction projects, particularly as a QA/QC Piping/Welding Inspector, Piping Superintendent, Piping Engineer, and Piping Supervisor across industries such as Petrochemical, Power, Utilities and Off Sites, and Refinery & Oil and Gas in Offshore and Onshore.

Engineer, Inspector, Supervisor / Technician

Civil Engineering graduate with professional experience. Proficient in civil engineering software such as Microsoft Office, AutoCAD, ETABS, and BIM. Strong leadership, communication, and teamwork skills, and committed to achieving the best results. Interested in developing civil engineering skills in a professional worker and deepening experience especially in the fields of structures. I am ready to take on new challenges and make a meaningful impact in your company. 

Engineer, Manager, Superintendent, Supervisor / Technician, Other, Drafter / Designer

Can work as a team or individual

Other