Control System freelance

I am an Instrument and Control Engineer with around 7 years experiences in various oil and gas projects in upstream and downstream sectors both onshore and offshore. I have been experienced in all project phases start from basic conceptual engineering study (Pre-FEED), Front End Engineering Design (FEED), Detail Engineering Design (DED), construction, pre-commissioning, commissioning up to start up. Currently, I worked in PT. Pertamina Hulu Energi Offshore South East Sumatera (PHE OSES) as Instrument and Control Engineer for Operation & Surface Facility division. My main role is to prepare instrumentation and control deliverables for in-house engineering design. And give technical review for engineering documents and drawings done by consultant, contractor or vendors during FEED/EPCI phase for Wellhead and CPP Platform both brownfield and greenfield projects.

Engineer

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

Experienced as an Electrical, Instrument and Control Engineer, Eager to Learn, Good at Analytical Skill.

Engineer

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

More than 23 years of experience with several multinational companies. Experience in project management, construction and engineering in Oil & Gas industry, green energy. Hands on engineering design experience for electrical/control system, industrial robot programming and mechanical design in industrial automation particularly in manufacturing and automotive industry.

Engineer, Manager, Superintendent

I have more than 15 years of extensive experience in the oil & gas industry (offshore and onshore or combination of both offshore and onshore). My experience covered most stages of the project: Front End Engineering Design (FEED), Detailed Design Engineering (DDE), Construction, Hook-Up, Pre-Commissioning & Commissioning, even in some parts of conceptual design. My core discipline area is Instrument and Control System (plus Telecommunication System) and have been the key persons for major instrument packages such as Integrated Control and Safety System (ICSS), Distributed Control System (DCS), Fire Alarm Control Panel and Fire Suppression System, Custody Ultrasonic Gas Metering System, Pressure Reducing Station, Wellhead Control Panel, Analyzer System, Automatic Tank Gauging System, Control Valves, Shutdown Valves, Manual On/Off Valves, Motor Operated Valves, Pressure Safety Valves, Field Transmitter, Telecommunication System, etc. In addition, my experience also includes major involvement in the development of electrical packages (MCC / Switchgear, UPS, etc.), mechanical packages (Heater System, CO2 Snuffing Packages) and HVAC systems. My project experience covered greenfield and brownfield project of offshore wellhead platform, refinery and petrochemical complex, onshore receiving facility, offshore and onshore pipeline, offshore offloading platform, power plant, storage tank area and LPG Terminal. I have experience in becoming Lead Engineer on several occasions, i.e. Lead Instrument, Control and Telecom Engineer for JAWA 1 Project (JV or Pertamina, Marubeni and Sojitz), Lead Instrument & Control Engineer for Bukit Tua Infill Wells Project (Petronas) and as Lead Telecom Engineer for Su Tu Nau Wellhead Platforms FEED Project (CLJOC). I had coordination and interface experience as Project Coordinator during my tenure in TOSHIBA for DCS Migration at Tanjung Jati B Power Plant Unit 1 and JAWA 1 Project (as additional role), which improved my comprehensiveness in knowledge about project execution, coordination and interface.

Engineer, Manager

More than 15 years experience of working years in Engineering Design in Oil and Gas Industry as an Instrument Engineer for both Brownfield and Greenfield projects. Involved in various engineering stage; Conceptual, FEED and basic engineering design, detail engineering design and EPCC work for Upstream and Downstream facilities. Familiar with the preparation of the instrumentation design drawings and documents, Instrument Loop Diagram, Instrument Location Plans, Instruments Installation and Hook-ups Details, Cable Block Diagrams, Instrument Schedules, Instrument Datasheets and Material Take-off. Experiences in onshore and offshore design of Instrument works and site visit for work scoping. Experience working with various multinational counterparts throughout projects as client PMT as well as consultant.

Engineer

EPCC OF 800 KW POWER + 1400 KW COOLING CAPACITY COGENERATION FACILITY Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 12 million Duration: May 2022 – Oct 2023 * Led turnkey EPCC execution of an integrated cogeneration system comprising 800 kW Capstone microturbine, 1,400 kW absorption chiller, cooling tower, and auxiliary systems. * Directed end-to-end project lifecycle from concept, detailed engineering, procurement, construction, to commissioning. * Achieved regulatory approvals from BOMBA, DOE, and MDPT with zero re-submissions — first-pass compliance on all technical dossiers and safety submissions. * Delivered mechanical completion and system commissioning 3 weeks ahead of schedule, with zero punch list on client handover. * Integrated SCADA and power management systems across thermal, electrical, and chilled water assets with full load synchronization. SCADA SYSTEM MODIFICATION & OPTIMIZATION – 1MW CAPSTONE MICROTURBINE Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 1.7 million Duration: May 2022 – Oct 2023 * Engineered a full PLC/SCADA revamp for 1MW Capstone C1000S microturbine integrated with solar PV, thermal oil heater, and plant-wide MSBs. * Implemented advanced logic for fault detection, dynamic load balancing, and power prioritization across multi-source energy systems. * Optimized system sequencing for microturbine and auxiliary operations, improving thermal-electrical efficiency by over 15%. * Achieved system commissioning and performance validation within 2 weeks, including HMI development and I/O mapping across redundant PLC networks. PETRONAS RAPID – ALLOY PIPING FABRICATION & INSTALLATION Client: OUIJV Role: Project Manager Value: RM 8 million Duration: Sep 2016 – Jan 2018 * Managed fabrication, logistics, and installation of over 100,000 Dia-inch of high-alloy piping (Inconel, Duplex SS) to ASME B31.3 and client specifications. * Led full QA/QC regime including RT, UT, PMI, and hydrotesting, achieving 100% client acceptance on first inspection. * Coordinated construction interfaces with civil, structural, and mechanical contractors in live plant environments. * Delivered project on schedule with zero NCRs and full compliance with Petronas and DOSH standards. OFFSHORE HOOK-UP & FLOWLINE INSTALLATION – DANA PLATFORM Client: PCPP Operating Company Role: Senior Project Engineer Value: RM 1 million Duration: Jan 2009 – 2012 * Executed offshore hook-up, spool fabrication, and installation works for flowline and topside piping under PETRONAS and PTS specifications. * Maintained 100% LTI-free record throughout offshore campaign. * Successfully secured two follow-up contracts: * D2 Flow Line Replacement * 6” Piper Valve Service Order * Oversaw cross-discipline coordination (piping, structural, E&I) ensuring seamless interface and “first-time-right” installation during shutdown window.

Manager, Engineer

Performance-driven engineer with a demonstrated success of 15+ years in petrochemical, fertilizer, and refinery plants. Skilled in designing, developing, and maintaining control systems for industrial processes. Proficient in process optimization, automation solutions, and ensuring compliance with major industry standards and safety regulations. Strong background in performing root cause analysis, loop tuning, and calibration of instrumentation to ensure efficient and reliable system performance. Experienced in implementing cost-effective solutions to maximize operational efficiency and minimize downtime.

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

* 15+ yrs of Experience in Automation * 12 Year Experience in Honeywell DCS, * Worked as Lead Engineer * 5 Yrs Experience on Schneider PLC * Worked on MODBUS,FF, Profibus * Project experience of End to End execution. * Detail Engineering, FAT,SAT, Site Commissioning,

Engineer, Superintendent

Committed and professional electrical, instrumentation and automation engineer familiar with standard electrical, instrumentation and automation requirements. More than twenty years experiences in proposal/tender, engineering design, procurement and project execution of electrical, instrumentation, automation control system and its construction for oil and gas, manufacturing and petrochemical industry. Strong management and leadership abilities for delegating tasks or providing instruction clearly and accurately. Prioritize, organize work and meet deadline. Strong communication skills, ability to work independently with best in team, self-motivated and ability to manage changing priorities.

Engineer, Manager

Dynamic HSE professional with over 16 years of experience in health, safety, and environmental management across diverse industries. Proven track record in enhancing compliance, reducing incident recurrence, and implementing effective safety training programs. Skilled in risk assessment, process safety management, and emergency response planning. Committed to fostering a strong safety culture and driving continuous improvement. Currently pursuing a Master of Science in Process Safety, I am eager to leverage my expertise to ensure safety excellence as an HSE Manager / Senior Engineer / Officer.

Engineer, Inspector, Manager, Other, Drafter / Designer

Sunday has over 18 years' experience in ICSS SIS DCS PLC Engineer Specialist & Instrumentation control systems Engineer Specialists, in Project Supervision & Experience of man management / draw maintenance plans and Advanced Product Quality Planning (APQP) Coordinator in oil and gas industry in Refinery ,FPSO, FSO, LNNG, project in onshore and offshore in designing , Field Instrument Installation, Maintenance Execution and Testing preventive maintenance turbines control systems specialist , installation & construction of subsea control systems, per. commissioning & commissioning excellent knowledge of all international codes , standards & site installation, Maintenance of PLC, DCS,ESD,F&G systems , HIPPS,SCADA/RTU FIELD LIKE IEC, ISO, SOLAS,API,ANSI/ISA,ASME,NFPA,BS, ITU-t, SAP /r3 experience and genera Knowledge in commissioning/troubleshooting; Gas Turbines control systems , PSS, ICSS, DCS, ESDV, F&G, PLC, SDV& good experience in troubleshooting of system alarms and equipment failures, Understanding of ISO 14001, OHSAS 18001:2007.& ATEX , pipeline Design Engineer & commissioning Engineer .Upgrades of Green and Brown Fields projects Vibration Monitoring Systems, Electrical Power management System, Natural gas Compressors. He has performed in Projects for TOTAL, SHELL, Exxon-Mobil, NLNG Bonny, Chevron, AGIP -NAOC and in several regions including Angola, Congo, Ras - Gas Tarn 7 package gas export line hookup & commissioning of ICSS & Instrumentation controls systems in Qatar and Korea and Nigeria & UAE & Algeria. He also possesses sound experience in ICSS PANORAMA software & functional analysis & commissioning & pneumatic, hydraulic control systems and Prior experience in GE turbine

20 years of experience in Instrumentation & Controls and SURF. Specialized in Engineering Design including Concept Select, FEED and Detailed Design. Participate in all project development cycle including Assembly & Testing, Fabrication & Construction and Hook-Up & Commissioning for Topside, Floater and Subsea project.

Engineer

19years in Oil & Gas Industry, starting in production operation in Petrochemicals, Offshore Gas Operation, Offshore Oil Operation, Special Offshore Project, Operation Optimization, Deputy Person in Charge, Shutdown Planner, Site Safety Leader, Coaching and Logistic Optimization. Currently now as Senior Production Technician at Tapis Delta/Pump Offshore Platform. I’m also a MBOT Certified Technician in Oil & Gas Technology (OG) entitled to hold the professional title as," Tc. Muhammad Noh Bin Ab.Wahab" PROFESSIONAL EXPERIENCE ExxonMobil Exploration & Production Malaysia Inc. (Offshore) May 2012 – Apr 2025 Senior Production Technician * Ensured compliance with corporate, local, and legal requirements related to safety and operations. * Served as Area Authority, approving PTWs and managing production operation and SIMOPS activities. * Led a team to foster high performance and accountability in production activities. * Oversaw contractor work to ensure compliance with contractual requirements. * Set priorities for equipment restoration with support functions such as Maintenance, Field Maintenance Modification, Well Work, Projects, and Surveillance engineering teams. * Oversaw emergency response contingency plans and activity implementation. Acted as Alternate on Scene Commander during emergencies. * Supervised Turn Around and/or Start-Up Teams. * Coordinated permits as a Verification Authority, ensuring thorough verification of PTWs and Risk Assessments. * Efficiently organized and led daily PTW meetings, upholding safety as a priority. * Implemented strict adherence to the SIMOPS matrix, validating PTWs against the latest activity updates within SIMOPS zones. * Participated in Toolbox Talks for critical activities, emphasizing safety and preparedness. * Managed the meticulous opening, suspension, and cancellation of PTWs, maintaining operational integrity. * Coordinated on-site activities to prevent conflicts in SIMOPS areas, promptly alerting authorities to any potential permit clashes. * Motivated and inspired staff in the execution of their responsibilities to drive a performance culture and encourage innovative thinking around process safety and production optimization. * Developed thorough working knowledge of unit process / environmental potential hazards and safeguards that prevent / mitigate. * Complied with safe work standards (Lock-Out / Tag-Out), Management of Change, Procedure compliance. * Carried out operational activities with a strong emphasis on safety. e.g.: Wellhead CDFTs and well tests. Pipeline pigging. Custody meter proving and sampling. Production Preventative Maintenance (PM) tasks. * Ensured adherence to the Work Management System. * Oversaw control room operations and coordinated maintenance activities. Conducted regular inspections and maintained accurate records of production activities. * Key Achievements/History: * Tapis Delta Pump Oil Platform (Apr 2023 - Apr 2025): Senior Production Operation Technician. * Kemaman Supply Base (June 2022 - Mar 2023): Material and Vessel Coordinator, enhancing materials and vessel coordination to maximize deck space and optimize vessel fleet. * EM-QS Kuala Terengganu (July 2021 - May 2022): Site Person In-Charge, managing logistics for COVID-19 quarantine station setup. * Palas Satellite Platform (July 2019 - June 2021): Deputy Person in Charge for SATURN Project, overseeing satellite construction, restoration, and increased production (200+ workers/day). * Jerneh Alpha Gas Platform (Sept 2012 - June 2019): Production Operation Technician. My Project Timelines (Based in my employment with ExxonMobil): It's challenging to pinpoint the exact start and end dates for each project without specific internal records. However, I infer some likely timelines based on the project nature and typical durations for such initiatives in the oil and gas industry: * SATURN (Satellite Turnaround) Project: Turnaround projects in the oil and gas sector can range from several weeks to a few months, depending on the scope of work. Given that this involved construction, painting, integrity restoration, and production volume increase on a satellite platform, it likely spanned several months in the period leading up to and following its execution. Me being the DPIC at the Palas Satellite Platform, involvement was during the active phase of the turnaround. * Hot Oil Recycle Project (Jerneh SD-2018): The "SD-2018" in the project name likely indicates that this was a shutdown (SD) project that occurred in 2018. These types of improvement projects are often implemented during planned maintenance shutdowns to minimize operational disruption. The implementation phase itself might have taken a few weeks during that shutdown period, with potential planning and follow-up extending beyond. * Material and Vessel Coordination (Kemaman Supply Base): Special assignment projects focused on process improvement can vary in duration. This project likely involved a period of analysis, proposal development, and implementation, potentially spanning a few months. The fact that it was a "special assignment" suggests a focused effort with a defined timeframe. * EM-QS (ExxonMobil Quarantine Station) Setup: This project was directly related to the COVID-19 pandemic. Given the urgency of establishing quarantine facilities, this was likely executed within a relatively short timeframe in 2020 or 2021, coinciding with the peak of the pandemic and the implementation of strict health protocols. The setup phase might have taken a few weeks to a month, followed by ongoing operational management. Specific Skills Likely Possesses: Based on my roles and project involvement, here are some specific skills probably possesses: * Technical Proficiency in Oil and Gas Production: A deep understanding of the equipment, processes, and technologies involved in oil and gas production operations. This includes knowledge of well operations, separation processes, and safety systems. * Troubleshooting and Problem-Solving: Demonstrated ability to identify, analyze, and resolve technical issues that arise during production. This requires a logical approach and a strong understanding of system interdependencies. * Project Management Fundamentals: Experience in contributing to and potentially leading smaller projects or work packages within larger projects. This includes planning, coordination, and execution skills. His DPIC role in the SATURN project particularly highlights this. * Process Optimization and Improvement: An aptitude for identifying areas for improvement in existing processes to enhance efficiency, reduce costs, and improve safety. The "Hot Oil Recycle Project" is a clear example of this skill. * Safety Management and Compliance: A strong commitment to adhering to safety regulations and procedures within a high-hazard environment. This includes risk assessment and mitigation. * Teamwork and Collaboration: Proven ability to work effectively within multidisciplinary teams, as evidenced by his involvement in various projects with different stakeholders. * Communication and Reporting: The ability to clearly communicate technical information, both verbally and in writing, including preparing reports and documentation. * Logistical Coordination: Experience in coordinating materials, resources, and potentially vessel movements, as demonstrated in his Kemaman Supply Base assignment and the EM-QS setup. * Adaptability and Flexibility: Willingness to take on diverse roles and responsibilities, as seen in his involvement in a range of different types of projects. * Training and Mentoring: Experience in guiding and training new staff on production procedures and safety protocols. BASF PETRONAS CHEMICAL SDN BHD, Kuantan, Pahang, Malaysia Nov 2007 – Apr 2012 Process Technician * Safely executed plant operations to achieve production quality and quantity targets. * Enhanced production efficiency by optimizing process parameters and equipment settings. * Improved product quality by adhering to standard operating procedures and quality control guidelines. * Maintained technical manuals and equipment maintenance records. * Provided hands-on assistance during emergency situations, such as equipment malfunctions or shutdowns. * Complied with safety rules and standards to maximize efficiencies and reduce accidents. * Consistently met or exceeded production targets through diligent process monitoring and issue resolution. * Participated in root cause analysis of process-related issues.

Supervisor / Technician

Experienced Instrumentation & Control Engineer with 18+ years of proven experience in the oil and energy industry. Demonstrated expertise across the full project lifecycle, including Feasibility Study, Technology Selection, Pre-FEED, FEED, Detailed Engineering Design (DED), EPC, Commissioning & Start-Up, Operations - Productions Transition, and Facility Maintenance. Well-versed in delivering integrated solutions from concept to handover, ensuring safety, efficiency, and compliance at every stage. Holds a Master’s degree in Instrumentation Engineering from Sepuluh Nopember Institute of Technology (ITS), with a strong background in both engineering execution and cross-functional project management.

Engineer, Superintendent

Accomplished Instrument and Control Engineer with 15 years of experience in the oil and gas industry, specializing in engineering design, project management, and construction (EPCC/EPCM). Expertise in greenfield and brownfield projects, plant rejuvenation, and asset life assessments. Well-versed in international standards, including API, IEC, and ISA, ensuring compliance, safety, and efficiency in instrumentation and control systems.

Engineer

I am a recent completer of the Graduate Employability Enhancement Scheme (GEES) under PETRONAS, where I gained hands-on experience in energy transition projects and upstream production support. I am eager to bring my technical background, project exposure, and commitment to sustainable development to your organization, especially in roles focused on topside facilities and production engineering. During my tenure with PETRONAS Energy Transition Solutions (ETS), I was actively involved in Carbon Capture, Utilization, and Storage (CCUS) initiatives. I contributed to process simulations using Aspen HYSYS, assisted in the development of pre-FEED engineering packages, prepared technical documentation, and collaborated closely with cross-functional teams. This experience sharpened my understanding of process operations, front-end project execution, and decarbonization technologies in real-world applications. Previously, I served as a Process Safety & Risk Trainee at Integrated Process Solutions, where I supported safety studies such as HAZID, HAZOP, and QRA, aligned with PETRONAS Technical Standards (PTS). My role included preparing post-workshop technical reports and participating in multi-disciplinary reviews with client teams, deepening my knowledge of operational risk and asset integrity. In addition, I completed my degree internship as a Production Trainee, supporting the daily manufacturing operations of the lil SOLID 2.0 device. I handled component planning, scanning, and troubleshooting up to 3,000 units per day, contributing to quality control and process optimization. With a strong foundation in process engineering, production operations, and safety compliance, I am highly motivated to contribute to the development and integrity of topside systems and offshore production facilities.

I've spent the last several years working full-time as an Instrumentation & Control System Engineer for several EPC companies which focus in Oil & Gas business. During that time, I've done everything related to Engineering, and Construction, including designing control architecture, FAT for WHCP, FAT for plc based control systems, producing datasheets, calculation, MTO, and procedure documents. Recently, I have been working for Pertamina Hulu Mahakam. I am involved in several brownfield projects such as new remote well connection (contr, installations for new metering systems, installation of new sludge pump etc.  I am familiar with International design codes & standards such as ANSI, ISA, API, ISO, ASME, IEC and skillful to operate computer programs for Instrumentation Engineering applications such as Smart Plant Instrumentation (SPI) / INTOOLS and InstruCalc. I would appreciate the opportunity to meet you for an interview and look forward to having your response. Thank you for your attention and kind assistance. I am looking forward to hearing from you soon.Thank you very much for your time. Regards Ir. Dimas Fajarisandi IPP

Engineer

* Offshore Operation Engineer at Reliance industries limited(May 2024- Present) * Control Room Engineer at Vedanta limited(Nov 2020- Mar 2024)

Engineer

Highly dedicated and skilled Instrumentation and Control Engineer with over 15 years of hands-on experience within Oil & Gas industry. Experience covers across DEFINE-SELECT-EXECUTE-OPERATE phases for both greenfield development and brownfield improvement projects. Proficient at communicating effectively and able to work independently with strong leadership traits to drive a synergy collaborative working environment. Expertise includes project engineering implementation within I&C discipline design deliverables specifically to ICSS (Integrated Control & Safety Systems) scope with wide exposure on all interfacing packages details. Broad career experiences across diversify job functions via various attachments to EP Operators, Design Consultants, HUC service providers, systems integrators, etc in EPC/ EPCIC contract environments. Well versed in EP Engineering Management Framework business model as previously described phases from identifying new business case with opportunity framing/ realization, PEP roadmap articulation, PS benchmarking - inadequacy Study including gaps closure/ recommendation and governance compliance to maximize/ safeguard values ensuring effective mission statement decision in line with FDP investment proposal. Paramount interest on Renewables technology, CCUS and its application deployment. Capable on representing COMPANY for official discussion with Host authorities, Client/Contractor, leading the team towards higher confidents with positive results.

Engineer, Manager, Other

WITH 30YRS AS COMMISSIONING AND START UP ENGINEER MAINLY IN LNG PLANTS OVERSEAS, 8YRS IN LIBYA LNG, 8YRS IN NIGERIA WITH SHELL LNG INCLUDING COMMISSIONING AND OPERATIONG 4 NEW LNG PLANTS INCLUDING ALL ASSOCIATED UTILITIES, LNG SHIP LOADING, CONDENSATE LOADING, GAS EXPORT COMPRESSORS,ALSO IMPLEMENT ELECTRONIC PTW SYSTEMS, INVOLVED WITH ALL CONSTRUTION MANAGEMENT TEAMS. AND NUMEROUS LNG PROJECTS WORLD WIDE AS COMMISSIONING ENGINEER/MANAGER

Engineer

Instrument & Control Engineer with 11 years of experience consist of Manufacturing and Oil & Gas Industry. Involve in various stages and project for Detail Design, Engineering (FEED),Installation, Hook up / Construction, Testing and Commissioning of DCS, plant maintenance for electrical and instrument, construction of interconnecting facility for telecommunication (fiber, system & telco cabinet, and gas detector), Instrumented Protective Function classification, verification & report and Fire & Gas Mapping, Control Systems, Safety Instrumented System Fire & Gas System, Field Instruments and various measurement equipment (custody transfer, metering, fire alarm system, fire and gas system, QMI analyzer, TGS etc) in Oil & Gas industry. Also Involve in production of TV and HDD Testing with a various software tools and debugging in Manufacturing Industry.

Engineer

Instrument Engineer, Instrument Commissioning Engineer, E&I Inspector

Superintendent, Inspector, Supervisor / Technician