Control System freelance

Graduate of Bachelor of Science in Electronics & Communication Engineer with the following skill summary. Continuous experience in FEED, Detail Design Engineering, Construction & Commissioning of Greenfield and Brownfield projects for Oil & Gas, Petrochemical, Power and Telecommunication industry. Specializing in Instrumentation & Control which requires both knowledge of industry practices/standards, and the ability to use computer software for preparing deliverables. Has knowledge in conventional instruments, Foundation Fieldbus, DCS, SIS, F&G, Electrical and Telecom systems. Work experience includes; Commissioning Engineer (Pre-Comm/Comm), Engineering Support for Construction, Design Engineer/Designer, Checker for Design Deliverables. Provide Technical assistance in Instrumentation & Automation and Telecom device installation, mechanical completion testing, precommissioning, commissioning and troubleshooting. Factory Acceptance Test and Site Acceptance Test of DCS, FGS, SIS and Vendor Packages. Subcon/vendor document review and coordination during construction. Additional experience includes involvement in project management, scheduling and procurement.

Engineer, Drafter / Designer

I've spent the last several years working full-time as an Instrumentation & Control System Engineer for several EPC companies which focus in Oil & Gas business. During that time, I've done everything related to Engineering, and Construction, including designing control architecture, FAT for WHCP, FAT for plc based control systems, producing datasheets, calculation, MTO, and procedure documents. Recently, I have been working for Pertamina Hulu Mahakam. I am involved in several brownfield projects such as new remote well connection (contr, installations for new metering systems, installation of new sludge pump etc.  I am familiar with International design codes & standards such as ANSI, ISA, API, ISO, ASME, IEC and skillful to operate computer programs for Instrumentation Engineering applications such as Smart Plant Instrumentation (SPI) / INTOOLS and InstruCalc. I would appreciate the opportunity to meet you for an interview and look forward to having your response. Thank you for your attention and kind assistance. I am looking forward to hearing from you soon.Thank you very much for your time. Regards Ir. Dimas Fajarisandi IPP

Engineer

Accomplished Senior Instrumentation and Control Systems Engineer with over 15 years of experience executing and leading diverse EPC projects, including, Oil & Gas, Water Treatment Facilities, and Infrastructure projects. Skilled in translating project strategies into detailed execution plans, and procedures. Demonstrated leadership abilities in delivering small-scale to large-scale projects domestically and internationally. Expertise spans proposal, execution, automation, control, analyzer, and fiscal metering systems

Engineer

am a highly motivated and result-oriented Oil & Gas Professional with a demonstrated history of track record over 23 years of experience. Substantial exposure to diverse and complex operations and business environment at different levels both locally and internationally. Passionate to developing people and creating an environment for people to be at their best. Core Competencies: • Highly skilled in process safety management, operations management, efficiency improvement, strategies development, functional & Organisational excellence. • Highly experienced in upstream / midstream Production Operations at numerous levels with excellent exposure in project execution, pre-commissioning, commissioning, start-up and operation of large scale, world class facilities • A strong, collaborative team player able to influence and advise project teams on clients safety and operational expectations. • Highly experienced in Operations Readiness & Work Management/Safe Systems / Control of Work systems with an emphasis on development and continuous improvement • Track record of National Workforce Development from hands-on coaching, mentoring and assessing to Competency System Development • Experienced in harsh working conditions and multicultural environments & fully conversant with industry standards and best practices with a strong operational safety attitude. • Cope well under pressure, communicate effectively within a team environment. Excellent troubleshooting and analytic skills. Areas of Expertise / Working Facilities: • Central Control Room Operations, Production / Process Optimisation and Troubleshooting. • Wellhead Operation, Well Testing, Inlet Separation by Slug Catcher, Gas Dehydration by Molsieve & Glycol TEG. • LPG Recovery by Turbo-Expander Cryogenic Process, NGL Recovery, Sulphur Recovery SRU and Export Gas Compression. • Crude Oil Degassing Stations DGS, Crude Oil Treatment (Sour & Waxy), Dehydrators, Desalter and Export Operations. • Well Testing, Production Optimisation, Produced Water Treatment, Water Injection & Gas Lift Operation. • Piping flow lines Pigging Operations and Chemical Injection. • Amine Gas Treatment, LNG, LPG, NGL, Tank Farm Operation and Crude Oil Pumping Stations. • Power Generation, RO System, Nitrogen & IA Package,, Flare KO / ATM, LP, HP Flare & Propane Refrigeration. • Annual Plant Shut Down Preparations, Coordination and Management. • On Job Trainer OJT (On Job Training of Expat and Local Nationals). My detailed cv is attached here for your review. I hope to hear from you soon. Best Regards, Arshad Hussain I Production Operations Supervisor Eni International Zubair Oil Field Basra Iraq Pakistan: +923067488968

Superintendent, Supervisor / Technician, Engineer, Manager

Project engineering in Instrumentation .Successfully completed 2 major project. TUV certified functional safety engineer. Currently working as Reliability engineer in Shell . Having rich experience in commissioning, troubleshooting, operations and maintenance of field instruments,DCS,PLCs,Control valves,ESD valves,Well head control panel and Fire & Gas detectors. Responsible for reviewing Material requisition wrt design specification.TBA analysis.vendor short listing. Expediting with vendors for manufacturing of the materials. Actively involving in client meetings and acting as front face to the project.

Engineer

I am an Instrument & Control Engineer with 4 years total experience. I have experience at proposal phase from start-up / operation and maintenance phase. I am able to build, design and calculate equipment that relate to instrumentation and control such as gauge and transmitter, control valve and on-off valve, PLC and DCS include in build flowchart process to execution phase. I can work with thigh schedule and high pressure condition. If possible with my schedule,I can witness and doing FAT and Commissioning, Please do not hesitate to contact me for more information

Engineer

Electrical Engineer with Experience in Residual and Commercial buildings, Drafting, project management, Electrical Wiring, Fire Alarm Systems, Smart houses, Building Automation.

Drafter / Designer, Engineer, Manager

 I'm Nino Nieves, a Filipino. With over 18 years of extensive experience in the erection, commissioning, and implementation of instrumentation systems across diverse industries, I am confident in ensuring optimal performance and reliability of complex systems. My strong background in project management and technical execution positions me to make significant contributions to your team and drive successful project outcomes. Throughout my career, I have led numerous projects that demanded a comprehensive understanding of instrumentation and control systems. I have expertly managed the installation and commissioning of advanced instrumentation equipment, consistently ensuring compliance with industry standards and regulations. My proficiency in data acquisition, process control, and system integration has enabled me to troubleshoot effectively and optimize processes, resulting in enhanced efficiency and minimal downtime. Beyond my technical skills, I excel as a proactive communicator and collaborator. I have forged strong partnerships with multidisciplinary teams, including engineers, technicians, and clients, to deliver projects on time and within budget. My ability to articulate complex technical concepts has fostered productive working relationships and facilitated successful project execution.

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

Analytical and solution focused professional with more than 10 years of experience as technical personnel with hands on experience on site, extensive customer service, sales, and project management on a wide range of projects involving sensors, piping, mechanicals, and electricals. Outgoing professional with track record of problem solving, system design, programming, process improvement and elevating company profile with target market. A collaborative team member that excels at working with others including stake holders and team members.

Engineer

Highly experienced Instrumentation and Control Engineer with over 20 years in engineering roles. Expertise in project management, handling complex greenfield and brownfield projects in oil & gas and petrochemical industries. Skilled in managing instrument packages from tender through development, installation, and commissioning. Proficient in coordinating during engineering, construction, and operational phases. Adept at implementing control and safety philosophies, process requirements, and cause & effect matrices into control and safety logics. Strong ability in developing control philosophies, designing control and safety systems architectures, sizing, and selecting instrumentation, and preparing instrument deliverables. Familiar with industry standards such as PTS, DEP and MSDS.

Profile: An experienced Subsea Controls Lead Engineer, currently responsible for the design, build, testing and delivery of a new state of the art in-riser control system. Other experience includes successfully delivering the FEED, design engineering, testing, commissioning, and start up of the Subsea Control System for Total's 70 well, 20 manifold deep-water Kaombo project. Chartered Engineering qualified (CEng) with over 8 years' experience that has covered all stages of major projects, including leadership and management responsibilities. To complement this diverse wealth of experience is a 1st Class Engineering Master's Degree with Honours, obtained from the highly prestigious University of Glasgow. A well-rounded Professional Engineer with charisma and passion that becomes infectious to others. Obtains a natural ability to read difficult situations quickly which has been a formidable skill when leading a team and developing fellow colleagues. Ensures a high focus on Client requirements as well as timely results, always adhering to HSE and others well-being.

Engineer

I have more than 18 years experience as Instrumentation & Control Engineer.

Engineer, Drafter / Designer, Superintendent, Supervisor / Technician

Communication skills, a results-driven approach and a well-organized team-player. I’m sociable, self- educating, flexible and ready for business trips. Have a sense of time & able to perform work under pressure. Ready to take on higher responsibilities as required by management

Engineer, Inspector, Manager, Supervisor / Technician

Have been working for sixteen (16) years in Oil and Gas Industry. Speciality in Design And Engineering division for Front End Engineering Design (FEED), Detailed Design (EPC and EPCIC) for New Fields and Brown Fields projects. Familiar with design workflows and working procedure to achieve good deliverable. Got experienced involved with project construction at fabrication yard and several time do site visit for brownfield projects.

A dynamic professional with around 16 years of experience in Project management, project execution, Engineering, Construction, Mechanical Completion & Commissioning as a lead role for SIX Major FPSO projects with operators like MODEC, SBM, BW Offshore and McDermott which includes ultra-deep water projects, deep-water and shallow water projects. Resourceful at maintaining excellent relations with various clients, a keen communicator with honed problem solving and analytical abilities. Solution Oriented, Relationship Building, Detail Oriented, Decision Making, Perseverance, Attention to Detail, Confident, Flexible & Adaptable and Positive Attitude. Experience in handling Project management activities from inception till project completion & overseeing all the resources, costing and project progress. Rich knowledge of marine mechanical & EIT equipment design and construction and commissioning activities. Familiar with marine standards MARPOL, SOLAS and International standards and codes IEC, IEEE, NEMA, ANSI, API, EU Directives. Deep understanding of Class rules associated with DNV, BV, ABS. Mile stone scheduling and preparing L4 schedule for EPCIC projects with strong risk management and risk analytical skills. Participated in project review meeting, client and vendor meetings. Actively involved in Technical and Commercial clarification meetings with vendors. Lead team of engineers (Up to 40 engineers and 100+ technicians and supervisors at site) in all the different phases of the project like FEED engineering, construction, mechanical completion and commissioning. Possess analytical mindset, effective planning and time management skills ensuring completion of projects on time; manage and supervise subordinated, providing effective leadership and support.

Engineer

Dedicate and passionate technical person looking for better enhancement in technical field.

Inspector, Engineer, Drafter / Designer, Supervisor / Technician

My name is Mohamed Abd Elaziz, and I am an Instrument and Control Engineer with 15 years of experience in the oil & gas industry. Currently, I serve as senior I&C engineer at Badr Eldin Petroleum Company in Egypt, where I have played a pivotal role in numerous EPC projects. Throughout my career, I have developed extensive expertise in field instrumentation, electrical equipment construction, QC inspection, and commissioning. I take pride in my ability to ensure the successful execution of projects from conception to completion, adhering to the highest industry standards. I am keen to explore opportunities where my skills and experience align with your esteemed company’s requirements. I have attached my resume for your review. Thank you for considering my application. I look forward to the possibility of discussing how my background may contribute to your team.

Engineer, Inspector, Superintendent

Instrumentation & Control Engineer with 11+ years of experience in Oil & Gas and water treatment projects. Skilled in PLCs, SCADA, DCS systems, and field instrumentation, with expertise in troubleshooting, project coordination, and quality assurance. Strong background in control panel development, panel wiring, and on-site surveys, ensuring efficient and precise execution of automation and control systems

permitting , project budget , tendering process, kick off , construction ,commissioning ,final fit out, handover , warranty defect , start up , operations ,maintenance , turnaround and shutdown

Manager, Superintendent, Engineer, Inspector, Other

Dynamic and results-oriented Electrical and Power System Engineer with massive experience in  designing, analyzing, and optimizing electrical systems across various industries. Proficient in power system, renewable energy integration, and electrical equipment calculating and selection. Exposure in execution of electrical HV, LV and ELV installations, cabling, containment, equipment & panel installations, review of drawings, preparation of material submittals and also manage NCR’s, SON’s etc. Adept at leading cross-functional teams to deliver cost-effective and efficient solutions.  Committed to ensuring safety and compliance with electrical standards. Strong analytical thinker  with a proven track record of solving complex engineering challenges.

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

I am a fresh graduate from Bandung Institute of Technology with a degree in Engineering Physics, specializing in Energy Management and Instrument. I have experience as a site engineer and in field operations, focusing on sustainability and electrical systems, and hold basic electrical training for both high and low current. I also completed workshop on battery management and gaining practical experience in optimizing battery performance. I am eager to be part of this momentum, leveraging my academic background and hands-on experience to contribute to the development of innovative and resilient electrical power systems. To gain my abilities in power system and its applied, I took a several class that related, such as energy conservation and renewable energy. Every class has a final project related in energy applications. In energy conservation, teach students with the ability to solve energy problems along the supply chain, from energy production to consumption, and with related environmental impact issues. This course teaches students to develop ethically and professionally responsible attitudes in various engineering situations in the energy conservation field, taking into account the impact of engineering solutions on global, economic, environmental, and social contexts. Also provided final project about identifying energy problems, energy audit planning-do-check-ack to evaluate energy saving opportunities. In renewable energy class, is related to renewable energy systems include the potential and processing of renewable energy, the basis of renewable energy systems, renewable energy sources, impacts and environmental problems.  Throughout my academic and professional journey, I have consistently focused on energy and power systems. As a Substation Engineer intern at PT PLN, I performed routine inspections and maintenance on high-voltage components, thermal analysis, and relay protection, experiences that provided me with a solid understanding of power systems operations and safety. This foundation aligns well with the scope Link projects, renewable connections, and substation and transmission design services. My journey in learning energy and sustainability continues by selecting engineer role in maintenance/protection and sustainability in internship experiences. Additionally, I have roled in maintenance and sustainability who contributed to the theoritical part by provided data and implementation in several sustainability project and sorted 10 priority projects from 40+ sustainability projects which this year and next year will be implemented at the plant. One of the main project is implementing the adsorption chiller as air conditioner or integrated HVAC system. In that project I learned a lot about refrigeration system based on adsorption and its implemented based on the percentage of CO2 savings and reducing, CAPEX and OPEX, and prerequisites. I believe, I can show the diligence I have which demonstrates the potential that I have to work and achieve my dream to be a world-class engineer who contributes significantly to the development of energy through as power engineer, both in terms of use and durability.

Engineer, Drafter / Designer

I am Kyaw Zay Thu, a holder of Bachelor of Technology (Electronic), has been working in Thermal Combined Cycle Power Plant Construction field for 9 years experience in Thailand and Cambodia, one years experiences in Myanmar who is now working in Thailand with Thai Rotary EIT (TREL Thailand) at Thai Oil CFP Project. In order to undertake the responsibilities elucidated for the applied post, I have, besides my educational backgrounds, competent knowledge in plant construction field, coordination and communication skill in related works, analysis and presentation. I am eagerly looking for a job in Plant Construction and I would like to apply for an Electrical Engineer position at your esteemed company. I have recently decided to leave my previous job and been looking for the new job with more challenges at dynamic and fast growing Company in my native country. I am a self motivated person who is willing to work at fast placed working environment. My complete profile description is mentioned on enclosed my resume paper and I am confident with my academic backgrounds, experience, and competency, coupled with my eagerness to learn and my motivation to succeed, I will be able to make a significant contribution to your organization. You can have my assurance that I will be dedicated and hardworking team player.

Engineer

I have 14 yrs of experience in the field of instrumentation and control