Instrumentation freelance

* 29 years’ experience and fully grown in the field of Instrumentation and Control System engineering discipline. * Experience in project management for Instrumentation & Control discipline from Conceptual/FEED, engineering/detail design stage, construction stage and pre‐ commissioning/commissioning/start‐up. * Experience in field instrumentation, i.e.: flow meters, control valves, choke valves, actuated shutdown valves and instrumentation in packaged equipment, as well as ICSS/DCS/PLC/RTU system engineering, process control and safety system application. * Involved and provide support in quality control & assurance (inspection and acceptance tests), hook‐up & tie‐in (installation/construction), pre‐commissioning, and commissioning activities. * Perform inter‐disciplinary support, communication, and coordination as well as with contractors/vendors/ suppliers or third party to achieve scope completion. * LNG project experience for gas production facilities (reservoir/wellhead platforms) and onshore LNG production facilities, from pre-FEED (conceptual), FEED (Select & Define/Optimize), Detailed Engineering Design, and engineering support to QA/QC (FAT and field/site test), Construction/Installation, Commissioning until Handover to Operation. * Engineering support to Operation of LNG refinery in Papua – Indonesia (Tangguh LNG), seconded in Facility Support squad, as well as supporting Reliability & Maintainability squad, Production Management squad, Well Intervention team, site maintenance team, and site project team.

Engineer

I am an Offshore and Onshore Technician with over 6 years of hands-on experience in high-risk environments. My career is defined by a zero-incident safety record and a proven ability to meet tight shutdown timelines for major industry players like Petronas and Hibiscus Petroleum. I specialize in confined space entry (CSE), catalyst handling, and rigging/slinging, backed by a solid foundation in mechanical maintenance and safety monitoring. CORE COMPETENCIES * Catalyst & Vessel Operations: Expert in catalyst loading/unloading, ceramic ball installation, and absorbent change-outs within reactors and vessels. * Mechanical & Piping: Skilled in spading, blinding/deblending, and the removal or installation of valves, gaskets, and pipe spools. * Safety & Habitat Specialist: Experienced in erecting and monitoring pressurized hot work habitats to allow safe welding in hazardous areas. * Rigging & Lifting: Proficient in safe lifting operations, material handling, and coordinating with mechanical teams for turbine and compressor overhauls. * Safety Leadership: Frequently entrusted with Fire Watch, Gangway Watch, and gas monitoring responsibilities to ensure site integrity.

Supervisor / Technician

Deputy Manager – Instrumentation Results driven professional with 16 years of experience in greenfield project execution and maintenance of instrumentation systems.

Engineer, Manager, Inspector, Other, Superintendent, Supervisor / Technician

To whom it may concern, I am MUHAMMED RISHAN THEKKEY THATTARAKKAL PMP®️, an ARAMCO approved Instrument & Control Engineer with 8+ years of experience in the Petroleum, Petrochemical and Water Sector Area. Dedicated and highly skilled Instrument & Control Maintenance Engineer & Testing and Commissioning Engineer in ensuring the optimal performance and functionality of complex instrument and control systems. Seeking to contribute my expertise in Pre-SAT, SAT, Loop Check, and Commissioning to a dynamic engineering team.. I am familiar with all standard control and instrumentation systems such as DCS, ESD(SIS), MATLAB, SAP, PLC-SCADA, AUTO-CAD, FIELD CARE & SFE100 (Endress Hauser), PACT-WARE and DevCom2000. I have a B-Tech in Applied Electronics and Instrumentation from India which has enabled me to develop a strong understanding of instrumentation engineering principles. During my time at Aqualia FCC group, SSEM (Saudi Services For Electro Mechanic Works), Aramco Saudi Arabia, SWCC Saudi Arabia, NWC Saudi Arabia and BPCL Kochi, Kerala. I have been responsible for operation & maintenance engineer, testing and commissioning engineer Conducted Pre-SAT and SAT activities for various instrument and control systems to verify design specifications and functionality. Performed detailed loop checks to identify and rectify any inconsistencies or malfunctions in the control loops of various instrumentation systems such as DCS, ESD, PLCs, RTUS & SCADA systems etc. I have successfully completed several projects related to instrumentation engineering such as Maintenance,  installation of new instruments in existing plants or commissioning of new plants from scratch. My experience has enabled me to develop a strong understanding of the principles involved in testing and commissioning of instrumentation systems as well as troubleshooting any issues that may arise during the process. I am passionate about instrument engineering because it allows me to combine my technical knowledge with my problem solving skills to create innovative solutions for complex problems. I am confident that my abilities and experience in the world of instrumentation engineering will allow me to perform excellent work.  Best Regards, Muhammed Rishan Thekkey Thattarakkal

Engineer, Superintendent, Inspector

Hi my name is Adrian Septiadi, 39 years old, male. I graduated from Engineering Physics – Institute Technology of Bandung, Indonesia. I have demonstrated good academic performance in most physical engineering courses, maintaining a 3.14 GPA (scale 4.00) in my major. I have approximately 16-17 years total experience in EPC Oil & Gas, involved in Several EPC Projects and Oil & Gas Operation (Onshore & Offshore), demonstrated engineering expertise, developing engineering design, interface with construction & commissioning, developing projects strategy and also strategic to perform equipment maintenance.  I bring to the table advanced computer skills, expertise in the MS Office, SPI & Calculation software (Instrucalc). Beside those computer skills, I am familiar with Instrumentation & Automation Equipment such as, PLC, DCS, SCADA System, maintenance for Instrument & PLC/DCS equipment, understanding flow chart of process, understanding equipment maintenance, Understanding Field Instrument Specification, Datasheet & calculation and also involved on project pre-commissioning & commissioning, understanding equipment troubleshoot especially for Instrument & Automation equipment. I had already taken several in house seminars and training. I like to get involved in some social & work activities. From those activities, I learned how to work under pressure, improving leadership, good in supervising staff, team work, communication, & analytical thinking. I am a hard-worker, fast learner, eager to learn and like to face a new challenge in my life.

Engineer

Headquartered in Mumbai, with additional offices in Pune, India, and Helsinki, Finland, we provide engineering services to clients across the globe. We are a multi-discipline Plant Engineering and Technical Documentation partner, offering digital innovation for industrial plant and product solutions. Our Plant Engineering services include Basic, FEED, Residual, and Detailed Engineering, fabrication packages, as well as Special Studies across Piping, Process, Mechanical, Civil & Structural, and Electrical & Instrumentation disciplines

Manager

Certified TUV functional safety engineer with over 14 years of experience at Rashpetco-Shell JV, responsible for maintaining field instruments and developing quality procedures. Participated in RCM Methodology to ensure effective operation of control systems, which increased the efficiency of maintenance activities and machine uptime, achieving a 15% reduction in preventive maintenance costs compared to the previous year.

Engineer

I have experience Oil and Gas FEED and Detailed Engineering. I consider myself familiar with software like ETAP, Electrical AutoCAD, Revit, Navishwork, Allen Bradley PLC (RSLogix 500). Having Technical knowledge in Design of electrical system, Power system studies, Arc Flash Analysis, Cable Sizing, Integrating electrical systems, design calculation, LV- MCC-Panels, PLC, VFD, Breaker and there selection in the Panels, Worked on UL, IEC, NFPA, NEMA Standards. I expect you will need to know in detail about me in order to consider my candidature. So I have attached my resume for your review as the first step in the application process. I hope you will find my profile to be a strong indicator of what I would contribute as a skilled, hardworking member of your highly qualified strategic team. I will look forward to meet you. 

Engineer

Instrumentation Engineer with over 30 years of qualitative engineering experience in conducting instrument-engineering design of processing facilities in the Oil, Gas (Offshore and Onshore) Greenfield and Brownfield (revamp/Upgrades) and Petrochemicals industries. Experience covers basic engineering design, FEED and detail engineering.

I am an Instrumentation Engineer with solid experience in oil & gas projects, specializing in pre-commissioning and commissioning of field instruments. My expertise includes installation, calibration, loop checking, and functional testing of pressure, flow, level, and temperature instruments. I have hands-on experience with transmitter configuration, control valves, and instrument troubleshooting, along with a strong ability to read and interpret P&IDs and instrument datasheets. I am also experienced in supporting FAT and SAT activities and ensuring all instruments meet project specifications and standards. I am committed to delivering accurate, reliable, and high-quality instrumentation work to support safe and efficient plant operations.

Engineer