Hire the best freelancers in integrity for your project
* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage
Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician
Around two decades of experience in the North Sea oil and gas sector. Started as an NDT (MPI/DPI) technician then moved into topsides/subsea inspection and integrity management. Worked offshore managing IRM and subsea construction projects. Currently working for Origin as Principal Integrity Engineer.
Engineer, Manager, Inspector
Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.
Engineer, Inspector
Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.
Engineer
Mahendra Ammar Pratama is a Bachelor of Metallurgical and Materials Engineering, University of Indonesia. Ammar is currently working as Project and Piping Engineer and have 6 years experience in Engineering Oil and Gas Company. Ammar has some comprehension in Conceptual, FEED, DED for piping discipline (material, layout, stress), project management, and construction installation activities for several onshore and offshore projects. Ammar known as a hard worker person and can easily adapt in social environment.
Engineer
An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks
Engineer, Manager, Other, Supervisor / Technician
Onur is an experienced oil and gas, heat exchangers, pressure vessels, static equipment, and packages engineer and engineering manager with 20 years of international experience and very good project track in FEED, EPC, PM especially for Oil & Gas, Energy and chemical projects including also grassroots, revamp and de-bottlenecking phases. Supervises and coordinates engineering activities thermal and mechanical design, preparation of material requisitions, datasheets, engineering drawings, vendor follow-up, vendor calculation and drawing check. Supervises and coordinates engineering activities, technical bid evaluation and procurement activities of equipment and vendor expedition. Coordinates project execution, manhour expedition and estimates, engineering activities and budget. Follows-up and coordinates PMC company activities.
Engineer, Manager
Senior Upstream Oil and Gas industry technical professional; over 25 years' experience providing solutions in demanding engineering, operations, and project management roles. Extensive global network. Key skills include: Comprehensive E&P Industry knowledge: Thorough understanding of the key fundamentals of the E&P industries' engineering disciplines. Proven ability to leverage these effectively to create business value and reduce HSSE risk. Project Management Exploration, Production Use basic and appropriate safety engineering practices, involve workforce in Process Safety, Improve safety culture, shared values in attitude and approach comes from leadership. Manage project delivery schedule, strictly implement project compliance to ensure project delivery complies with regulations. Responsible for project scope, schedule and cost, detailed planning and motitoring progress and delivery during the implementation phase. Operations Management: Expertise leading Field Development and Operational plans. Held line management project, production, maintenance & HSSE responsibility for complex offshore operation with annual CAPEX and OPEX budget. > $100M. Highly experienced and skilled in setting and managing budgets, operations and safety. FPSO's, subsea facilities and pipelines.
Engineer
Asset Integrity Management EMAS Asset Integrity Management · Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. · Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. · Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. · Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. · Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells · Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. · Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project · Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. · Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster · Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster · Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster · Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc. Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) · Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK · Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster · Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 · Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster · Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. · Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period. Safety & Constructability Review Studies Drop Object Protection – KND Platform · Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster · Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines · Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster · Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex · Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. · Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster · Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) · Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification. Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: · Conducted Pre-Project Kick-Off Meeting activities, including: · Defining the Scope of Work · Establishing the Project Schedule · Developing the Master Deliverables Register · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. · Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: · Performed Steady-State Flow Assurance Analysis using PIPESIM. · Developed the Subsea Production System Report detailing subsea configurations and system integrity. · Created the Design Basis for Process, outlining key process parameters and design considerations. · Formulated the Overall Field Development Scheme to optimize production and operational efficiency. · Developed the Brownfield Modification Report for integration with existing facilities. · Engineering Studies & Reporting: · Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. · Conducted a Concept Screening Assessment to evaluate viable development options. · Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. Feasibility Study for FB-1 Market & Commercial Analysis: · Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. · Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. · Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: · Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. · Process Safety & Design Evaluation: · HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: · Two tie-in options: MPPL or Existing WHP · Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 · Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant · Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements. BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification · Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. · Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: · Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. · Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: · Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: · Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: · Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. · Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: · Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. · Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: · Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis · Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency · Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration · Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield · Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. · Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. · Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. · Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. · Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. · System testing, commissioning, and performance verification to ensure operational readiness. · Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. · Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. · Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.
Engineer
I am a Project Engineer with over 5 years of hands-on experience in pipeline integrity inspection, project execution, and field engineering within the oil and gas industry. My career has been built around managing and delivering complex in-line inspection (ILI) projects, coordinating multidisciplinary teams, and ensuring compliance with international standards such as ASME B31.8, API 579, API 1163, and API 1169. Throughout my work with major oil and gas operators, I have successfully executed inspection campaigns covering more than 1,800 km of pipelines, ensuring safe and continuous operations without disruption. I take pride in identifying and mitigating critical anomalies that could lead to safety, environmental, or production risks. Beyond technical expertise, I excel in client engagement, vendor management, and project optimization, consistently reducing costs and accelerating timelines while maintaining a 100% safety record. With a background in physics from the University of Southampton, I bring strong analytical skills and problem-solving capabilities. I am passionate about applying my technical foundation to support both integrity management and business development, with a vision of advancing toward commercial and managerial roles in the industry.
Engineer
I bring over +25 years' of frontline and strategic experience in well completions and intervention, onshore, offshore, subsea, deepwater and technically complex assets. My focus is always on delivering safe, reliable, and cost-effective solutions that align with clients’ field development goals, HSE commitments, and commercial expectations. Whether managing high-risk multizone gravel packs, planning intelligent water injectors, or leading real-time intervention operations, I’m known for technical rigor, operational discipline, and cross-functional collaboration that consistently leads to high-performance outcomes. Clients can rely on me to: * Navigate non-routine operations with confidence and control * Lead multi-disciplinary teams under high-pressure, high-stakes environments * Embed HSSE, compliance, and reliability into every stage of project delivery * Drive value optimization—technically and commercially * Develop and mentor national talent to strengthen long-term capability My approach is always delivery-focused, quality-assured, and grounded in the operational realities of complex oil and gas environments
Engineer, Supervisor / Technician
Over 15 years experienced in oil and gas industry as quality engineer, inspection engineer, asset integrity engineer and resident inspector with involvement in projects such as topside-jacket fabrication, offshore facility installation, hook-up and commissioning and FPSO. Previous employees includes Petronas, Petrofac, SBM Offshore, JX Nippon and Sapura Energy
Engineer, Inspector
Enthusiastic principle with over nineteen years of experience in the Oil & gas Offshore/Onshore facilities, power plant (geothermal, steam, gas-power plant, renewable energy), chemical and petrochemical (Brownfield / Greenfield plant). Well versed in materials selection, cathodic protection, protective coatings & painting, thermal and cold insulation materials, corrosion, pipeline, piping design and layout, piping materials component and selection of classes, pipe stress & flexibility, data analysis for failure analysis, and mechanical static in Basic design, Pre-FEED, Front End Engineering Design (FEED), Detailed Engineering Design, and Construction with many projects accomplished and was a great achievement. It has been achieved for about fifteen years in the oil and gas with 17 projects, seven years in the chemical and petrochemical sector with 8 projects, and four years in the power plant, geothermal, and renewable energy with 4 projects. Developing specification of piping material classes, Valve material selection, wall thickness calculation, branch reinforcement, bend and mitter fittings, pressure capacity, hydrostatic test pressure, piping speciality items, data sheets as per ASME B31, ASTM, API, MSS, AWWA, and NACE, and not limited to developing the material's selection diagram (MSD), material selection report (MSR), corrosion allowance (CA) calculation, Corrosion Management Plan, Corrosion control philosophy, Corrosion aspect study, specifications, data sheets, piping index material classes, pipe stress analysis, through Root Cause Effect Analysis with Heat Material Balance (HMB), Utility Flow Diagram (UFD), Process flow diagram (PFD) as references to make them (MSD, MSR, CA) complete. As reaching out the service life design of equipments, piping systems, pipelines that it has to refer the international standards applicable, such as NACE MR 0175/ISO15156, NACE MR0103/ISO17495, NORSOK M-506, M-001, M-501, API 571 & 581, ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.8, ASME BPVC, ASME, ASTM, API, NACE, SSPC, NORSOK, ISO, DIN, NACE Publications, and etc. Enthusiastic with artificial intelligence and clean energy to research to implement in the digital transformation and infrastructures energy, oil and gas, and other industries and can use machine learning models.
Engineer, Inspector
8+ years of experience in Project Operations Management specializing in Plug & Abandonment (P&A), Drilling & Workover, and Well Intervention services for both offshore and onshore rig operations. Extensive expertise in managing Upstream Well Intervention technicality, safety and commercial to support operating and non-operating wells, including gas operations tailored to specific well and reservoir conditions. Additionally skilled in marine spread management, ensuring seamless and successful campaign execution. I take initiative in recognizing problems and creatively work to identify reasonably solutions. I have developed analytical, interpersonal and leadership qualities that are prepared to undertake and get over through challenges in different situation. My objective is to secure knowledge, experience and working attitude in a quality-working environment where my qualities as a fast learner and multi-tasking through new challenges can be met. My conscientious attitude allows me to think ahead and priorities important tasks and I am careful to pay attention to details.
Engineer
Managed EPC projects
Manager
* Experienced and Results-Oriented Subsea Engineer: Over 23 years of expertise in the Oil & Gas and Mechanical Engineering industries, with a strong focus on feasibility studies, concept engineering, Pre-FEED/FEED, detailed design, calculations, fabrication, testing, construction, and installation of SPS/SURF engineering systems. * Global Project Experience: Successfully represented clients (ENI, Petronas), manufacturers, and contractors on various international projects across the North Sea, Norway, Singapore, USA, UK, Italy, China, India, Indonesia, and Malaysia. * Subsea Systems and Hardware Specialist: Comprehensive experience in subsea field development and project execution, with an exceptional track record in SPS and SURF engineering, including product design, manufacturing, testing, installation, and operational support for components such as wellheads, XMTs, manifolds, connection systems, subsea distribution systems, subsea controls, umbilicals, flowlines, and risers. * Standards Expertise: Proficient in international standards such as ISO 13628-, API 6A/17D/RP2, ASME VIII/B31.3/8, DNV, ASTM, BS, NORSOK, AISC, AWS, and EuroCode3. * Technical Proficiency: Extensive knowledge and hands-on expertise with FEA software (ANSYS, ABAQUS, NASTRAN, PATRAN), design tools (SolidWorks, Pro-E, AutoCAD), and advanced hand calculations using MathCAD and spreadsheets. * Leadership and Collaboration: Demonstrated ability to lead engineering teams through all phases of project execution, effectively managing and mentoring groups of engineers and designers to achieve project objectives
Engineer, Manager, Supervisor / Technician, Superintendent
Certified Quality Control and Assurance Professional with 17 years of extensive experience in the Oil & Gas industry. Proven expertise in inspection, documentation, regulatory compliance, audits, and implementation of quality systems such as ISO 9001 and ASME standards. Strong track record of leading QA/QC teams, reducing non-conformance, and ensuring client satisfaction through strict quality management practices.
Inspector, Engineer, Superintendent
Chartered civil/structural and maritime engineer with 16 years’ multi-disciplinary experience in design, inspection, asset management of, and remediation design for, infrastructure in the energy, transport, civil and industrial sectors.
Engineer, Inspector
I'm Scientist, Pipeline and Engineering in Specialist Structure/Construction of Body with H-Beam, Plate and Weld: 1. Pipeline Engineer: Welding Engineer & Field Joint Coating 2. Mechanical Engineer in Structure of Body: Aerospace, Submarine/Naval Architect, Hangars, Storage Tank, Vessel, Over Head Cranes, Pipe Rack, Shelter, Bridge and Girder. STRENGTHS: Adaptable, Team-Player, Goal Oriented, Optimistic and Managerial Skill Achievement: I am Indonesian who first discovered the rubber coating chipped in Project Pipeline in Sumatera 370KM from Belawan / Medan to Arun / Aceh and Pipeline in Jakarta MKMT (Muara Karang-Muara Tawar) 30KM from Muara Karang to Muara Tawar coral that has never been detected / Inspection in the project pipeline conducted by PT. Pertamina (circa 1980s), caused by pipes that are already on standby in the above Weld Joint longer to be influenced by several factors such as the effect of hot weather, the cold night rain resulting in chipped rubber joints Coating
Engineer, Manager, Inspector, Superintendent
I am 15 years experience in the oil and gas industry, I have developed a strong technical foundation and leadership capabilities across plant maintenance, project delivery, turnaround, and shutdown activities. Throughout my career, I have had the privilege to work with major organizations such as Petronas, Shell, Lotte Chemical, and Sarawak Energy, delivering excellence in quality and operations. Highlights of my background include: • Extensive Maintenance and Project Experience: Over 8 years specializing in plant maintenance and project execution, including direct involvement with Petronas Project Delivery and PRPC UF at Pengerang Integrated Complex (PIC). • Quality Management Expertise: Hands-on experience in developing and implementing Quality Management Systems (QMS) for EPCC projects, turnarounds, and shutdowns. • Certifications and Technical Proficiency: Certified ISO 9001 Lead Auditor, internal auditor for QMS, and CSWIP 3.1 Welding Inspector, with strong familiarity with DOSH regulations related to new installations and CF renewals. • Customer-Centric Approach: Committed to delivering exceptional service and maintaining high client satisfaction. • Academic Foundation: Holding a Bachelor of Science degree in Mechanical Engineering, providing a comprehensive understanding of engineering, maintenance, and quality management lifecycles. I am passionate about contributing to organizational success by applying my technical knowledge, leadership, and dedication to continuous improvement. I am confident that my experience, skills, and drive for excellence will be a valuable asset to your team.
Engineer, Inspector, Manager
I'm a production engineer with diverse skill set and experience who might be very helpful to bring production engineering to a good level and ensure all the interfaces with other departments are managed properly and timely
Engineer, Manager
Athinarayanan Rajaram Mobile: +971 503382756, E-Mail: expatqcengg@gmail.com Hello, Please find the CV attached for the POSITION of QUALITY ENGINEER/ INSPECTION PROFESSIONAL I'm particularly interested in this position, which relates strongly to my more than 15 years of experience in Project Management, Quality Assurance & Control, ISO Auditing and Welding Inspections across various geographies including United Arab Emirates, Qatar, Oman, Singapore and India. Recently, I am working for a short term FPSO re-vamp project on MODEC MV10 Vessel at Dry Dock World Dubai as Quality Engineer; I believe I meet all the essential criteria for the position. Please find below a summary of my experience and key accomplishments across my career: · Expertise in applying QA & QC standards to various processes within the business unit; formulating & maintaining quality control & assurance objectives complementary to corporate policies / customer demands · Hands-on experience in implementing WHSE International Codes and Standards like OHSAS, ISO 14001 & NEBOSH; Offshore Marine Standards like ABS, DNV Classifications & MODU standards as well as Piping & Equipment Codes & Standard like API,ASME, ASTM · Successfully executed EPC projects for Oil & Gas, Offshore Marine, Water Desalination Plant in structural, piping, Pressure vessel and valves inspections · A result-oriented individual with strong analytical, negotiation, communication, interpersonal and organizational skills I am targeting assignments in Project Management, Quality Assurance & Control and Consulting Operations. I am keen to join your organization due to its leading position in the industry, great organizational culture, spirit of innovation, professionalism that characterizes your organization and its employees. I am attracted to this role on account of the organizational performance, values, challenges that it offers. I appreciate your efforts in taking the time to review my credentials and experience. Looking forward to your response. Sincerely, Rajaram Athinarayanan +971 503382756
Engineer, Inspector, Superintendent, Supervisor / Technician
I am an engineer with 6 years of experience in Maintenance and Reliability support for the oil and gas industry, specializing in asset integrity management, CMMS governance (SAP PM), and reliability optimization. My core expertise includes asset register and hierarchy buildup in line with ISO 14224, maintenance strategy development, SCE identification, and data-driven performance analysis. I have consistently delivered robust and sustainable maintenance management systems with a strong track record of first time-right implementation. Skilled in interpreting technical data and documents, I provide actionable insights that enhance the reliability, availability, and maintainability of critical assets. I excel in cross-functional collaboration, stakeholder support, and continuous improvement, with a proven ability to standardize processes, manage KPIs, and lead multidisciplinary teams. With a strong focus on data integrity and strategic system enhancements, I am committed to delivering value driven, efficient, and compliant maintenance solutions.
Engineer
A professional engineer with over 15 years of experience in the oil and gas industry. Diverse experience with experience as project lead, proposal lead, project management, construction management (EPCC/PMC), proposal design, FEED design and detailed design both within onshore and offshore works. Companies worked for include Technip Energies, TechnipFMC, Toyo Engineering & Air products. Clients worked for include PETRONAS, SHELL, CHEVRON and Long Son Petrochemicals. Team player with excellent collaboration and communication skills to drive the project forward. Dedicated to lifelong learning with a strong technical base.
Drafter / Designer, Engineer, Inspector
I am a Bachelor of Mechanical Engineering graduated from Sultan Ageng Tirtayasa University with a GPA of 3.18, and currently pursuing Postgraduate education at the Faculty of Engineering, University of Indonesia (UI) majoring in Asset Integrity Management. I have various certifications and professional training relevant to the field of Quality Control (QC) and inspection. I have just completed my role as Welding Inspector on TAR 2024 project at PT Chandra Asri Pacific under PT Sucofindo, Cilegon, Banten. In that position, I was responsible for the inspection and supervision of welding quality, ensuring compliance with applicable standards and regulations, and ensuring the structural integrity of the systems and components being tested. With a strong educational background and practical experience in engineering inspection, I have sharp analytical skills, attention to detail, and the ability to work in a team to achieve the highest quality standards. I am excited to bring my expertise into the role of QC Inspector and contribute to the success and safety of the projects I am involved in.
Inspector, Engineer