Mechanical freelance

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Availability: 3-month Notice

Engineer

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

Mohd Hanif Bin Mohd has total of 15 years' experience involved in Construction, Fabrication, Installation, Maintenance, and Inspection and working on Quality Control (QC) for Oil & Gas fabrication and construction on Topside, Offshore Installation, Piping project, Storage tank, Structural, Restoration, Shutdown and Civil. Experience as Piping supervisor. Familiar to the relevant code and specification AWS D1.1, ASME, API 650, API 1104, B31.3, ASTM, PTS (Petronas Technical Standard),

Inspector

Skilled at investigating and resolving failures, reviewing materials choices and vetting suppliers. Achievements include shrinking approval windows and simplifying procedures to keep production on schedule. Accuracy-driven and hardworking with methodical and diligent approach.

Engineer, Inspector, Manager

A more than 10 years experience working in Oil Gas projects, petrochemical and shipyard building. A Qualified CSWIP Senior Welding and BGAS Painting Inspector level 2, RTFI PCN Level 2.Possesses the skill to develop quality programs, maintain and monitor technical matter, assurances & field inspections. A proven track record as a reliable team player with strong leadership.

Inspector, Supervisor / Technician, Superintendent, Manager

Multi-skilled project management professional with more than 20 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

Seeking challenging position in Mechanical with growing organization that can enable me to apply my knowledge, skills and experience in the best interests of organization to further my personal and organization goals. Professional Experience • Thirteen years vast experience in Machinery/mechanical/Maintenance field different Organization Onshore and Offshore pre-commissioning, Commissioning, Start-Up & Maintenance field such as, Oil & Gas Industry (FPSO) and merchant vessel. Leverage strong values & substantial Technical experience to continuous moves ahead & strive s to achieve high professional capabilities thereby adding values to organization and s elf. An effective communicator with excellent relationship management skills and stro ng analytical, leadership, problem solving & organizational abilities. Career summary Oil and Gas ( FPSO ) Industry Experience • 5 years of experience on FPSO, Offshore Maintenance and Operations of Engine Room and Topside machinery. • Major Contribution to Conversion and commissioning of traditional oil tanker in to FPSO and sail away to location. • Compliance and pro-active with Safety and Environmental procedures. • Daily Job Planning and Supervision. • Fully conversant with Offshore PTW system and major contributor in Job Safe Analysis (Risk Assessment) to all routine and critical jobs. • Yearly (TAR) Turn Around :- Job Planning and execution and supervision • Conversant with Fire and Gas System, Plant behaviour on ESD0, ESD1 and ESD2 • Engine Room and Top side Steam Plant Operation and Maintenance Panning, scheduling, supervising. • Continuous Training to local Watch Keepers. • Creating and establishing safe working practices/procedures for E/R and topside operations/ maintenance. • MDO bunkering and Oil Record Book updation.

Engineer, Supervisor / Technician

Bachelor’s Degree in Mechanical Engineering, with extensive experience in asset integrity and inspection. Certified as an API 510 Pressure Vessel Inspector and API 570 Piping Inspector, I bring a strong background in non-destructive testing (NDT) techniques. I am proficient in interpreting technical drawings and conducting thorough inspections of both offshore and onshore static equipment. My expertise includes evaluating the condition of static assets, recommending corrective actions, coordinating NDT activities, overseeing repair works, and compiling detailed reports using asset integrity management systems. Well-versed in international construction and inspection codes, including API and ASME standards, I am eager to apply my skills and knowledge to ensure the integrity and reliability of static equipment and structures within a dynamic engineering team. 

Inspector

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

Highly motivated and dedicated professional with a passion for project management and document control since 2013. Philosophical studies graduate with a proven track record of combining hard work, strong work ethic, and effectively handling multiple responsibilities. Possesses extensive knowledge in office administration, production planning, project administration, document control, and project management support. With over 5 years of experience as an administrator, adept at implementing strategies, developing and refining processes, and delivering comprehensive reports to senior management. Proficient in JD Edwards, ACCPAC, HRIS, and the Microsoft Office Suite. Works collaboratively as a team member, valuing effective communication and information sharing at every step, areas of expertise included : • Project Management • Production Planner •

Supervisor / Technician

I have more than 10 years of experience in oil & gas projects for onshore and offshore. Most of my positions are as a project engineer where I assist project managers and coordinate all departments.

Superintendent, Manager

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

 I would like to continue to expose to the Challenges and Latest Technology in this industry and make the best use of my education, acquired skills, and experience for Personal and organizational growth.

Engineer, Manager, Other

"A steady stream and self-control will harness curiosity and passion"

Drafter / Designer, Engineer, Inspector

Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides

Engineer, Manager, Inspector

A graduate in Mechanical Engineering with a specialization in Energy Conversion Engineering from Jakarta State Polytechnic. I am passionate about expanding my skills and knowledge in the power generation industry. My academic journey was complemented by practical experience through various internships, which helped me develop a strong foundation in power plant maintenance and energy systems. WORK EXPERIENCE * PT Cikarang Mitra Services (Nov 2024): Conducted a comprehensive two-week overhaul of a General Electric TM2500 aeroderivative gas turbine at PT PLN Batam PLTG, optimizing performance through detailed inspection, maintenance, and component replacement. * PT CCEPC (Sep 2023 - Jun 2024): As an intern at CCEPC, I participated in machine inspections, recorded parameters in the control room, cleaned generating equipment, and carried out routine inspections of fire extinguishers in a steam power plant. * PT PLN Nusantara Power UP Muara Tawar (Aug 2022 - Jan 2023): Performed inspections, preventive and corrective maintenance, and overhauled gas and steam turbines at the Muara Tawar Power Plant, a 2050 MW facility. I was involved in daily checklist checks for the 130 MW SIEMENS V94.2 turbines. EDUCATION * Bachelor of Mechanical Engineering (2020-2024) * Jakarta State Polytechnic, Indonesia * GPA: 3.57/4.00 ORGANIZATIONAL EXPERIENCE * Project Officer at Invention of Mechanical Engineering Venture (Apr - Aug 2022): Led the preparation for a national-scale competition and seminar focusing on the role of youth in the 4th industrial revolution. * Staff in the Education and Science Division at the Machine Student Association (Mar - Dec 2022): Created learning content on complex materials to aid student understanding. * Staff in the Technology Research Development Department at the Student Study Group (Mar - Dec 2022): Conducted research on renewable energy tools and materials. SKILLS AND CERTIFICATIONS * TOEIC Score: 600 * Gas Turbine Maintenance Level 2 (National Professional Certification Agency) * Microsoft Office Suite proficiency With these experiences and qualifications, I am eager to continue growing in the field of power generation, specifically in areas related to energy systems and turbine maintenance.

Engineer

A person with more than 14 years experiences in Technical Drawing (2D) and 3D modeling as draftsman in various industries sectors in Malaysia especially construction & oil gas industries . Besides, 5 years experiences in construction Industries as Project Engineer and also have 2 years experiences as site supervisor.

Drafter / Designer, Engineer, Supervisor / Technician

A driven and dedicated piping engineer with extensive experience in Oil and Gas Greenfield / Brownfield projects for ADNOC, SHELL, Petrobras, Chevron and ExxonMobil. Known for providing a high standard of design and engineering practice to ensure sound project governance and execution. Highly skilled in implementing and coordinating effective project execution with full compliance to design basis and project specification. Sought after delivering projects through operational excellence and continuous improvement, engage positively with stakeholders and build strong relationships. Strengths in taking an innovative approach, alternative solutions, stakeholder management and forming mutually beneficial relationships.

Engineer

Fresh graduate in Electrical Engineering with hands-on experience as a Research Assistant at the University of Riau. Skilled in using advanced electrical engineering software, conducting power quality analysis, designing solar power systems, understanding electrical energy conversion, and programming PLCs. Passionate about developing innovative engineering solutions, particularly in renewable energy and power systems. Dedicated to enhancing sustainable and reliable power solutions through precise technical work and a commitment to continuous learning.

Engineer

Results-driven and detail-oriented professional with a solid background in mechanical engineering & technology and extensive experience in project management, maintenance, and operations. Seeking a challenging and dynamic role where I can leverage my diverse skill set to contribute to the bottom-line effectiveness of my department and drive the success of the organization. Passionate about delivering high-quality work and exceeding expectations, I am committed to utilizing my expertise in project management, planning, coordination, and team leadership to achieve outstanding results in a collaborative and innovative environment all over the world

Manager

More than eighteen years in Oil & Gas field experience with Master Science in Engineering Business Management by UTM, Post Graduate (Master) in Offshore Project Management by ALAM (Malaysia Maritime Academy) and exposure to Brownfield Project and Green Field Project which cover EPCIC and DECOM Project Management, Quality Assurance, and Safety Management of Oil & Gas floating platform facility assets (FPSO, FSO, MOPU & FPS) and Fixed Platform (WHP, Jacket).

Engineer, Manager, Superintendent

I am an Environmental Engineer with Sustainability Engineering master’s degree. I am a highly motivated engineer, experienced on variety of different environmental, construction and energy sectors, with excellent understanding of Project Management, Environmental Management System, Maintenance, Landfill, Waste to Energy, Water and Wastewater Treatment, Regularity Compliance, GHG Calculation and Reduction, Data Analysis and Reporting.

I am Muhammad Bintang Fajar, a passionate Mechanical Engineer with experience in piping engineering, offshore and onshore oil & gas projects, and mechanical maintenance. I hold a Bachelor’s degree in Mechanical Engineering from Sepuluh Nopember Institute of Technology, where I developed a strong foundation in mechanical design, project execution, and problem-solving. Currently, I work as a Piping Engineer at PT Meindo Elang Indah, contributing to offshore (Greenfield) and onshore (Brownfield) field development projects. My role involves reviewing piping isometric drawings, preparing Material Take-Off (MTO) documents, conducting 3D model assessments, and ensuring compliance with ASME B31.3 standards. I also evaluate vendor quotations and collaborate with mechanical and process engineering teams to maintain design accuracy. Previously, I interned at PT Wijaya Karya (Persero) Tbk., where I worked on the Manyar Smelter Project, gaining hands-on experience in piping construction, field supervision, and safety assessments. I also interned as a Mechanical Maintenance Engineer at Joint Operating Body Pertamina-Medco E&P Tomori Sulawesi, where I conducted condition monitoring for rotating equipment, analyzed lube oil and vibration data, and supported preventive maintenance strategies. I am certified in IWCF Level 1, Engineering Project Management, and CAD/CAM & CAE Mechanical Engineering Design, and proficient in AutoCAD, SolidWorks, Ansys, Navisworks, and Fusion 360. My TOEFL score of 630 reflects my strong communication skills, which I have further developed through international exposure and leadership roles. With a keen eye for detail and a problem-solving mindset, I am committed to delivering high-quality engineering solutions, optimizing project workflows, and collaborating effectively within multidisciplinary teams.

Engineer