Mechanical freelance

•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc… 

Manager, Superintendent

"A steady stream and self-control will harness curiosity and passion"

Drafter / Designer, Engineer, Inspector

ROTATING

Engineer

Seeking challenging position in Mechanical with growing organization that can enable me to apply my knowledge, skills and experience in the best interests of organization to further my personal and organization goals. Professional Experience • Thirteen years vast experience in Machinery/mechanical/Maintenance field different Organization Onshore and Offshore pre-commissioning, Commissioning, Start-Up & Maintenance field such as, Oil & Gas Industry (FPSO) and merchant vessel. Leverage strong values & substantial Technical experience to continuous moves ahead & strive s to achieve high professional capabilities thereby adding values to organization and s elf. An effective communicator with excellent relationship management skills and stro ng analytical, leadership, problem solving & organizational abilities. Career summary Oil and Gas ( FPSO ) Industry Experience • 5 years of experience on FPSO, Offshore Maintenance and Operations of Engine Room and Topside machinery. • Major Contribution to Conversion and commissioning of traditional oil tanker in to FPSO and sail away to location. • Compliance and pro-active with Safety and Environmental procedures. • Daily Job Planning and Supervision. • Fully conversant with Offshore PTW system and major contributor in Job Safe Analysis (Risk Assessment) to all routine and critical jobs. • Yearly (TAR) Turn Around :- Job Planning and execution and supervision • Conversant with Fire and Gas System, Plant behaviour on ESD0, ESD1 and ESD2 • Engine Room and Top side Steam Plant Operation and Maintenance Panning, scheduling, supervising. • Continuous Training to local Watch Keepers. • Creating and establishing safe working practices/procedures for E/R and topside operations/ maintenance. • MDO bunkering and Oil Record Book updation.

Engineer, Supervisor / Technician

Hello! My name is Temo MANUEL, and I have been working as a product design engineer and mechanical structural simulation and calculation specialist for 5 years now. I am currently available to take on new projects in mechanical engineering. I offer you a unique service tailored to your needs and fully adapted to help you accomplish your project. I have recognized technical and functional skills, including: ® Product Development - Mechanical product and system design, 2D detail drawings, 2D assembly drawings, Project management, Technical report writing, Prototyping, Equipment assembly, Product testing and certification. ® Simulation and Mechanical Calculation - Linear static analysis,Non linear analysis (Geometrical non liearity, material non linearity, contact non linearity), Dynamic analysis (free vibration, forced vibration…), Buckling analysis, Thermal analysis, Fatigue analysis, I also have a good command of calculation software such as: ® CAO – SolidWorks, Catia, Creo, Revit ® CAE - Ansys, Abaqus, NX Nastran, Stress) Please feel free to leave a comment or send me a private message with your contact information, and I will get back to you.

Engineer, Drafter / Designer

More than 14 years working experience in Oil & Gas and Power Plant industries as a mechanical engineer. Familiar with ASME, ANSI, API, ASTM, PTS, DEP etc. Prepare MTO, PR, TBE, TC, STQ, WCR, IDC, IFA, IFC, design calculation, equipment seating, lifting & installation procedure, VDR, VDI, progress report, ship-loose list, change order proposal, etc. Liaise with client, consultant, Project Management Team (PMT), procurement, construction, planning, subcontractors, vendors, etc on related engineering issues. Mechanical package equipment involved such as Gas Engine Generators, Emergency Diesel Generator, Gas Lift Compressor, Air Compressor, Steam Turbine, Fuel Gas, Hypochlorite, Pressure Vessel, Pedestal Crane, Centrifugal Pumps, PD Pumps, FD Fan, Auto Strainer, Sootblower, Fire Fighting & Safety Equipment, Piping Specialty Item, Material Handling Item, and others.

Engineer

Having fifteen (15) years, experiences in Construction and quality with qualified PCN 3.1 certified Welding Inspector in Oil & Gas industries and holds HND Diploma in Electrical & Electronic Engineering. Progressive working experience and expertise in oil & gas industries of Project Management, QA/QC, MLNG, Construction, Fabrication, Petrochemical, Refinery, Transportation and Installation of Pipe lay/PLEM/SPM, Hook Up and Commissioning, Inspection/Testing, Module Fabrication, Mechanical, Piping, Welding and Structural.   Working and experience with international operator TOTAL S.A(Africa-Congo), Petronas Carigali, Petronas MLNG, Murphy Oil(M), Turkey Petroleum (TPOA), Gazprom (Russia), Stroygazmontazh (Russia), Dubai Petroleum, IOAC (Iran), LLOG (U.S.A), British Gas (Trinidad & Tobago), AITEO E&P (Nigeria). Experienced in using of International standards and codes: API, ASME, AWS, DNV, BS EN,TOTAL, GOST, PTS, ASTM and other international recognized Codes & Standards

Inspector, Engineer, Supervisor / Technician, Superintendent

Over 17 years of Construction and QA/QC experiences in Batam-INDONESIA & overseas location within offshore Oil & Gas facilities construction (i.e. Jack-up Drilling Rig, Service Jack-up, and Jack-up Barge), Subsea Production System, and Shipbuilding. Mainly involve on Structural, Steel Outfitting and Pipe fabrication and Installation and Mechanical Completion as accordance with the quality of job, progress and performance. Good working knowledge of International welding codes, construction & quality procedures, construction drawing, piping isometrics & P&ID. Continuously focused on promoting & improving site safety awareness & producing a high level of quality & Client satisfaction. *Rates are negotiable*

Inspector, Superintendent, Supervisor / Technician

Career objective focus application of experience to new areas of challenge, increasing exposure to Technology & business practice. Oil & Gas work experience allied to technical & communication strength may be utilized to excellent advantage on a range of project development assignment worldwide. A Challenging position where I can contribute my competencies in Oil &Gas, Fertilizer, Power plants, Chemical and Petrochemical field. PROFESSIONAL EXPERIENCE: I've 9 Years in Oil & Gas, Fertilizer, Power Plants, Shipyard, industrial maintenance, Chemical and Petrochemical field in Construction projects and Flow line laying and decide the ROW (Right of way).

Engineer, Superintendent

Hard Driven hands- on project, construction & commissioning personnel with more than 10 years of operation in oil and gas industry from downstream to upstream scope of work. Able to hold position in multiple layers in organization and independent in most working condition. A team player who listens and understand. Proven track record in major project worth up to RM200mln. At least 2 major EPCC and 2 major shutdown belts in hand.

Engineer, Manager, Superintendent, Supervisor / Technician

Availability: 3-month Notice

Engineer

I am an experienced Piping Designer/Engineer in offshore/onshore engineering in oil and gas projects.12 years Experienced Piping Design Engineer in Upstream Oil & Gas offshore/onshore industries in which 8 Years experience in offshore projects, Involved in FPSO’s, offshore fixed platforms and Drilling rigs and 4 years' experience in onshore industry like refineries and storage facilities. Familiar with EPC, detail engineering design and feed projects. Having excellent ability in design, drafting and coordination skills with 2D & 3D cad software’s such as (S3D18: -2 yrs., E3D2.1: -4 yrs., PDMS12.5: -5 yrs.) currently looking for suitable job opportunity.

Drafter / Designer, Engineer

A resourceful, dedicated, energetic and an efficient result-orented person that focuses on achleving project goals and objectives or any assign responsibillty without compromising schedule, cost and quality. Experience professional with over 18 years of multi-disciplined in the oil and gas industry involved in project such as heavy lift, rigid pipeline, facilities upgrade, pre-commissioning, commissioning and maintenance scope.

Engineer

I came to know that there are vacancies in your esteemed organization. If my resume matches with your requirements, I shall be grateful if you give me an opportunity to serve in your organization. Iassure you Sir/Mam, that I will discharge my duties to the post of my abilities and prove to your selection.

Engineer, Manager

I have experienced in Oil & Gas and Marine ship building as a Project Engineer with more than 10 years education-working related experienced in engineering, design, and analysist with having good knowledge on International code and standard (ASME, API, ASTM, etc). Familiar on static & rotating equipment, weight control, experienced in sequence of work based on project priority to follow up each discipline related painting, and read engineering drawing. Able to work with ISO9001, ISO14001 and OHSAS18001 Standardization and Quality Management System. Knowledge and experience in project engineer, quality control, production and planning engineer, sales engineer, and construction for various project. Self-motivated possessing, strong written and verbal communication skill, team work, leadership, fast learner and strong personal with ability to communicate at all level

Engineer, Manager, Superintendent, Supervisor / Technician

My career as Drafter in engineering & Construction Oil & Gas Refenery.Chemical fabrication and manufacturing.

Drafter / Designer

Having 9 years work experience as Piping Engineer effective hands-on Offshore and Onshore Oil and Gas Facilities with a background bachelor of Mechanical Engineering. Has strong capability in Design Engineering, Procurement & Construction works in the Proposal stage & Detailed engineering both green field and brown field / modification.

Engineer

·       Assigned to Machinery Monitoring and Prescriptive Diagnostics (MMPD) solution by Rotating Department for Petronas OPUs. ·     Designed simulation using iCON (Symmetry) by SLB for rotating equipment such as reciprocating, and centrifugal pumps, compressors, gas turbines, and steam turbines. Requires collaboration with Group Digital and Process Engineers. ·       Developed Failure Mode Effects Analysis (FMEA) for extruders and HPRT for fault diagnostics purposes. Deployed fault diagnostics of rotating, electrical, and static equipment into AVEVA PRiSM Client to assist users with fault diagnostics. ·       Engaged in the deployment process for rotating, electrical, and static equipment into AVEVA PRiSM Client. This includes engaging in User Acceptance Test (UAT). ·       Participated in Asset Life Study (ALS) for rotating equipment with Petronas Dagangan Berhad (PDB) at Subang Airport.

Engineer

More than 15 years experience in Quality Control, Welding Inspection, Mechanical, Engineering-Design, Shipyard, Construction-Fabrication, Instrument, Piping, Structure, Tank, Pressure Vessel, or related field.

Inspector

Adib Sofwan is a highly skilled Engineer with 7 years of experience in the construction and oil and gas sectors. He has a proven track record in project management, leadership, communication, and planning, particularly in the execution of mechanical static and package equipment. Adib is well-versed in international standards such as ASME, API, FEM, BS, EN, PetroBras Standards, and PETRONAS Technical Standards (PTS). He has successfully collaborated with esteemed clients including Petronas, PetroBras, Sapura Energy, Dialog, and Top Glove. Adib possesses extensive hands-on experience and proficiency in utilizing Solidworks and AutoCAD for designing safety catch net systems, shoring supports, and 2D and 3D access scaffolds. He is now actively seeking a dynamic role where he can work closely with senior management, further develop his technical skills, and expand his knowledge in project management around the world.

Engineer

Experienced Engineer/Inspector for refinery, onshore, and offshore facilities, existing and new fabrication for 8 Years.

Engineer, Inspector

8+ years' experience in procurement and engineering roles across various companies in contractor, consultant, shipyard, and oil & gas sectors, including EPCM. Open to new challenges and roles in engineering, procurement, and other technical positions.

Engineer, Drafter / Designer, Other, Superintendent, Supervisor / Technician, Manager, Inspector

Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides

Engineer, Manager, Inspector

Established 4 years professional experiences of the Project Management and Detailed Engineering Design (Mechanical) in Oil & Gas Industry for offshore and onshore projects. Performance-driven and motivated junior engineer recognized for conducting professionalism in engineering project by managing and controlling project elements. Keen to explore the dynamics of a challenging career in a fast track organization by reshaping his engineering knowledge and integrated skills.

Engineer