Mechanical freelance

Dear Sir/Miss,    It has come to my attention regarding the vacancy that your team can find and suit my qualifications. So, I would like to take the opportunity to be considered for the position if my qualifications and experiences meet the criteria needed.   Thus, I'll attach the relevant documents for your references such as resume,relevant certificates and credentials.  As of now, I am holding a position as HSE Manager at Esstar Vision Construction Sdn Bhd which is responsible for the Titanium-Basil Rejuvenation Project. The project intends to build a new Maleic Anhydride refiner and briquetting plant in the existing crude Maleic Anhydride plant complex in BASF Petronas Chemical Sdn Bhd (BPC) petrochemical complex in Gebeng, Pahang and will be run by Petronas Chemicals MTBE Sdn Bhd (PCMTBE). Before that, I was holding a position as HSE Manager/SHO at Northern Corridor Implementation Authority (NCIA). This is one of the agencies under the Ministry Of Economy which is responsible for Northern Corridor Economic Region (NCER) implementation for all 4 states in Perlis, Kedah, Perak and Pulau Pinang.    Prior to that, I was holding a position as HSE Manager/SHO at China Communications Constructions (ECRL) Sdn Bhd, Section 6, Maran Pahang which responsible as main contractor for East Coast Rail Link (ECRL) project Section 6 alignment from Kuantan to Mentakab approximately 140.1 km long.    In 2018, I was holding the position as Senior Executive at Safety, Health And Environment Department in Tanjung Langsat Terminal Sdn Bhd, a member of Johor Corporation. TLP Terminal right now operates 7 berths of liquid jetty and 2 berths of dry wharf. Before that, I was part of the pioneer team that set-up Pengerang Terminals Sdn Bhd (PTSB) in 2013 during the construction of 57 tanks and 3 km long independent deepwater petroleum jetty in Kampung Sungai Kapal, Pengerang. Right now, it has been fully operational with 6 berths, handling approximately 60 vessels and receiving hydrocarbon and chemical products such as mogas, gasoline, naptha, crude oil and MTBE (Methyl tert-Butyl Ether).   Back in 2004 until 2006, I was working as Production Engineer at Southern Galvanized Wire in Ipoh which specialized in producing ferrous steel wire.   After that in 2006, I was working as Assistant Mill Manager for Felda Palm Industry and managed 3 palm oil mills so far back then.   Last but not least, I am registered Safety & Health Officer (SHO) with Department Of Occupational Safety & Health (DOSH), Malaysia with registration number, HQ/18/SHO/00/019**   Please do not hesitate to call me through my mobile phone and email should you need further explanations. I would be glad to clarify any unclear information.   All my certificates come with either Bahasa Melayu and English. I will be more than happy to clarify the matter for your team.   Last but not least, I am fully vaccinated as required by the government. Due to some security concerning my private info, I can show my digital vaccine certificate face to face if your side feels the need to. Thank you again for the opportunity given and I wish you luck.    Regards,   Mohd Halimi Bin Hamdzah   SHO Registration Number:  HQ/18/SHO/00/019**   013-7103183

Manager, Engineer

Experienced technical assistant to engineering and geologist, organized social, personal assistant, private and corporate events, good relationship with Media, public speaking, and project management, writing and editing skills Versed in a range of communication solutions and technologies.

Other

I am Senior Marine Engineer who experienced in floaters engineering such as FPSO, FSO, MOPU, FSU, and TLP. My experienced concentrated on the Marine Systems discipline in FEED, Detail Engineering, Construction, Procurement and Operations and Maintenance. Able to prepare calculations, datasheet, specification, report and all related with engineering requirement.

Engineer

Highly motivated and results-oriented Rotating /static Equipment Engineer with 10+ years of experience in the oil and gas industry. Proven expertise in the Commissioning, execution, planning, engineering, and supervision of preventive, corrective, proactive, and predictive maintenance strategies for a wide range of rotating equipment, including gas turbines, Steam turbine, gas compressors, gearboxes, pumps, Fans and centrifuges. Possessing strong analytical and problem-solving skills, with a proven track record of optimizing equipment performance, reducing downtime, and ensuring safe and efficient operations. Seeking a challenging position where I can contribute my skills and experience to a dynamic and growth-oriented organization.

Engineer

A highly accomplished and results-oriented Construction Manager with over 12 years of comprehensive experience in managing mechanical, piping, structural, HVAC, EIT, and architectural disciplines across diverse EPCIC projects. Demonstrates strong expertise in project planning, procurement, construction execution, and quality assurance, with a proven ability to lead multi-disciplinary teams and deliver projects safely, on time, and within budget. Skilled in tender management, proposal development, and execution strategy planning, with a solid record of driving project success from bid to completion. Recognized for technical proficiency, leadership excellence, and commitment to meeting client expectations and industry standards.

Engineer, Manager

Engineering,

Engineer

In summary, I have a total of 16 years of working experience as a Senior Project Engineer / Project Engineer involved in engineering, procurement, construction and commissioning (EPCC), FEED, EPC, PMC, EPCM and project management in the oil and gas / petrochemical industry including onshore and offshore with Operator, Consultant and Contractor. Please find attached my cv for your reference. Currently, my employment is with Petronas Techical Services Sdn Bhd in Kuala Lumpur. I am available with immediate notice period.

Engineer, Manager

As a Project Engineer with close to 4 years of hands-on EPC experience, I bring proven strengths in vessel construction, offshore campaign coordination, and engineering deliverables—most recently supporting the FSO Permata Dulang project in compliance with PETRONAS requirements. At Duta Marine Sdn Bhd, I currently oversee topside and hull construction activities in Batam, serve as the technical interface between engineering and construction teams, coordinate riser installation permits, and lead vendor Factory Acceptance Tests (FATs). I manage over 15 vendor packages, ensuring alignment with project schedules, client specifications, and quality standards. Previously at Ranhill Worley, I supported execution of Electrical, Instrumentation, and Telecom (EIT) scopes—maintaining technical registers and resolving cross-functional issues across QA/QC, commercial, and engineering domains. I contributed to SAFOP reviews, 3D model workshops, and discipline integration to ensure design compliance and constructability. My degree in Marine Engineering from UniKL MIMET underpins my technical approach. I am proficient with MS Project, Aconex, and Navisworks, and confident managing multi-discipline coordination from FEED to commissioning.

Engineer

What sets me apart is my curiosity-driven approach; for me, crafting smarter solutions provide more potent methods. With certifications Graduate Mechanical Engineer (B.Eng Hons.) delivered as Project Engineer with proven success leading highest value electrical projects RM654 Mil, orchestrating 110 personnel across 11 blocks also can bring solid foundation in AutoCAD expertise by produced precise engineering shop drawings and as-built documentation is within my expertise. Proficient in Genset & UPS systems and experienced in collaborating with multidisciplinary teams and expert in annihilating extension of time, known for quick problem-solving, effective communication and proficient decision making.

Engineer

Could work as soon as possible, dicipline, hard work, try to coordination with team for solve problem, negotiate

Engineer, Inspector, Superintendent, Supervisor / Technician

Currently working at Hartasuma Sdn. Bhd. as Safety and Health Officer. Excellent in Safety & Health and ISO standards matters. Fast learner and can work under pressure. Actively developing the career in both engineering and safety and health sectors that can not only enhance personal growth but also to contribute to the industry.

Enthusiastic professional engineer from Selangor, Malaysia with 8 years of working experiences especially in managing/handling multidisciplinary EPCIC/EPCC engineering projecs.

Engineer, Manager

I am a seasoned Quality Assurance & Quality Control (QA/QC) professional with over 24 years of experience in the Oil & Gas, EPC, and manufacturing industries. Throughout my career, I have specialized in implementing international codes and standards (ASME, API, ISO, ASTM, EN, IEC, AWS, NACE, DNV), ensuring compliance, and driving operational excellence across large-scale projects. Currently serving as Manager – QA/QC, I lead quality initiatives, audits, and certification processes, while fostering a culture of continuous improvement and safety. My expertise spans welding, NDT, fabrication, inspection, vendor/supplier audits, and quality management system implementation in alignment with ISO 9001 and API requirements. I believe in building strong cross-functional collaboration to deliver quality outcomes that meet client expectations, regulatory requirements, and organizational goals. My career philosophy is rooted in discipline, integrity, and results-driven execution. Beyond technical expertise, I am passionate about mentoring young professionals, knowledge sharing, and driving innovation in quality systems. I have also pursued Lean Six Sigma Green Belt, API Monogram certifications, and continue to enhance my professional knowledge. My vision is to contribute to organizations by ensuring the highest levels of quality, reliability, and compliance, while also preparing the next generation of quality leaders.

Manager

M.Sc. in Chemistry and Chemical Technology, B.Sc. in Mechanical Engineering, with 25 years of experience across diverse industries, including petroleum condensate refinery, used oil recycling, petrochemicals, waste management, lubricant blending, and quality control.

Engineer, Inspector, Manager, Supervisor / Technician

• A Post Graduate Certified Project Management Professional having more than 10 years of experience in handling EPCC Projects which includes Construction, Fabrication, Erection, Installation / Commissioning and Plant Modifications of Process and Oil & Gas Industries • Proficient in Planning, Executing, Monitoring & Controlling and Closing of projects • Diversified skills included Construction Management with Strong Interpersonal, Technical & Administrative skills. • Successfully executed and completed brown and green fields mechanical projects • Fully conversant with engineering drawings including, P&IDs, Isometrics, GADs/ Fabrication Drawings and well versed with API, ASTM, ASHRAE, NFPA, ASME standards • Possess strong verbal and written communication skills and trainings

Engineer

Project Engineer with 17+ years of oil & gas experience in EPCC, mechanical completion, and commissioning for onshore and offshore projects. Skilled in project planning, piping supervision, tendering, and system handovers. Strong record of delivering projects in compliance with PETRONAS standards, PPMS, and regulatory requirements while leading multi-disciplinary teams to achieve safe, timely, and cost-effective execution. Currently pursuing PMP® certification after completing the 35-hour PMP Master Course.

Engineer

I am an experienced FEA Engineer with over 10 years of expertise in the offshore, subsea and marine industry. My career has been dedicated to solving complex engineering challenges using advanced simulation techniques, primarily leveraging ANSYS software. I specialize in structural analysis and design, linear and nonlinear analyses, fatigue assessment, lifting analysis and various other analyses. With a strong foundation in engineering principles and a proven ability to deliver accurate and reliable analyses, I am passionate about optimizing designs to enhance safety, efficiency, and performance in demanding environments. My hands-on experience with industry standards and collaborative approach to problem-solving make me a valuable contributor to multidisciplinary teams. I am now seeking an opportunity to bring my skills and experience to a dynamic organization, where I can continue to advance innovative engineering solutions for the offshore and marine sector.

Engineer

A highly experienced, Electrical Commissioning Engineering Professional, with a proven track record of success embracing and utilising leading edge technology for all aspects of implementation, installation and commissioning of electrical engineering solutions, within blue chip organisations across a wide range of market sectors. Acknowledged for the provision of innovative, delivery focused, results orientated solutions. Exceptional relationship management skills, working with customers, development teams and partners to deliver applications, with the provision of ongoing technical support to exceed customer expectations. Experienced in electrical engineering systems commissioning, Design, service management, 3rd party contractor management, client and support services, full project lifecycle, managing tight deadlines, contractor management, supplier management, coaching & mentoring, quality management, resource allocation best practice delivery.

Engineer

A results-oriented Commissioning Engineer with extensive professional experience more than 12 years in successfully planning, executing, and overseeing the pre-commissioning, hook up & commissioning process for complex oil & gas mechanical systems, including process piping, plumbing, and fire protection, demonstrating proficiency in troubleshooting, system testing, ensuring project compliance with design specifications, documentation procedures and safety standards, while effectively collaborating with cross-functional teams to deliver fully operational systems on time and within budget.  Possess strong understanding and experience of COMPLETION SYSTEM & CERTIFICATE, OPERCOMM SYSTEM and Punch-list such as ICAPS and PIMS, Ready for Inspection (RFI) Walk through, Ready for Commissioning (RFC) and RFSU " A highly motivated, hard worker, creative, like to try new thing, and delighted to work as a team"

Engineer, Supervisor / Technician, Superintendent

Leading Mechanical and piping for any MOC or project engineering execution

Engineer

I bring over five years of experience in project execution, client coordination, and technical services within the oil and gas industry. My background includes piping and tubing installation, jetty maintenance for onshore plants, thermal insulation for piping, vessels, and valves, as well as recent project at FPSO Berantai for Sandwich Plate System (SPS) repair work. Over the years, I have successfully managed multiple projects and clients, including EPCC works for Petronas, MMS, MMHE, Honeywell, and Vestigo. I am confident in my ability to contribute effectively to your team.

Engineer

Having more than 30 plus years into Oil and Gas sector holding an engineering postgraduate by qualification

Manager

Having many years experience with Multi-skilles discipline in the Maintenance and Commissioning of: - Power Plants, Gas Plants, Pump Stations & Crud Oil Topping Plants. - Gas Turbines Packages Assembly: Control Panels, Instrumentation and Mechanical. - Start-Up and Commissioning as a “FSE then FSR” Field Service Engineer.

I have over 20 years of experience including product compliance, electrical engineering for mechatronic and electronic systems, home appliances and production test devices. My work covers EU and US certification frameworks (CE, UL), risk assessments (EN ISO 12100, EN 60335-1, UL 62368-1, RN ISO 13849-1), Technical documentation (DoC/DoI, LoCC, safety files), and material compliance (RoHS, REACH, CP65). I routinely coordinate with certification bodies (TÜV Rheinland, UL Solutions, SIQ) and support to have compliant, and sustainable product launches.

Engineer, Supervisor / Technician, Drafter / Designer, Other

Engineer

Manager