Painting %26 Insulation freelance

I have experienced in Oil & Gas and Marine ship building as a Project Engineer with more than 10 years education-working related experienced in engineering, design, and analysist with having good knowledge on International code and standard (ASME, API, ASTM, etc). Familiar on static & rotating equipment, weight control, experienced in sequence of work based on project priority to follow up each discipline related painting, and read engineering drawing. Able to work with ISO9001, ISO14001 and OHSAS18001 Standardization and Quality Management System. Knowledge and experience in project engineer, quality control, production and planning engineer, sales engineer, and construction for various project. Self-motivated possessing, strong written and verbal communication skill, team work, leadership, fast learner and strong personal with ability to communicate at all level

Engineer, Manager, Superintendent, Supervisor / Technician

An agile process instrument engineer with more than 3 years of experience in the oil & gas industry and driven to deliver excellence in the upstream energy sector. Specialized in design, sizing, and selection of new field instruments such as flowmeters, transmitters, sampling panels and gas analysers for Custody Transfer Metering Skids and Metering houses whilst upholding the industry standards and project specifications.

Engineer

Early inspection background as an NDT technician followed by a degree at Northumbria University and 17yrs solid experience of integrity management in the oil and gas sector in Aberdeen and Newcastle. Self-motivated and resourceful with the ability to address challenges and identify opportunities for improvement. A combination of office-based and offshore work has established a strong level of project management understanding (APM Level-D accreditation, gained in 2011) and the ability to deal with numerous technical issues such as defect assessment, RBIs, anomaly management, data management, inspection planning and execution, management systems and audits.

Engineer, Inspector, Supervisor / Technician

Proven and extensive track record of delivering quality mechanical, piping & project engineering solutions. From front end, design, procurement, construction, installation and all the way through to maintenance and operations. Operating Company experience in projects and maintenance, Consultant experience as part of design team and Contractor experience as Package Vendor. Offshore, and onshore.

Engineer

Over 15 years experienced in oil and gas industry as quality engineer, inspection engineer, asset integrity engineer and resident inspector with involvement in projects such as topside-jacket fabrication, offshore facility installation, hook-up and commissioning and FPSO. Previous employees includes Petronas, Petrofac, SBM Offshore, JX Nippon and Sapura Energy

Engineer, Inspector

To acquire an engineering and management position where I can both enhance my skills, gain knowledge and experience to make a positive contribution and grow with your company as an inspiring planning engineer in the oil & gas industry. I have a great patience and capable to work under pressure both independently and as a collaborative team member.

Engineer

A performance and result-driven professional Asset Integrity Engineer with a decade of extensive experience, specializing in Mechanical Static, Asset Integrity Management, Inspection, Corrosion, Materials, and Risk-Based Inspection, demonstrating a proven track record of successfully delivering comprehensive Risk-Based Inspection (RBI), Corrosion Management Plan (CMP), Corrosion Design Basis Memorandum (CDBM) and Anomaly Management. Currently, I have successfully developed my own API 581 Probability of Failure (POF) and Consequence of Failure (COF) Level 1 calculation using Microsoft Excel, showcasing my proficiency in the field. I have developed key project management skills and the ability to improve communication with broader project teams, coupled with a profound understanding of Upstream, Downstream, and Marine (FSO & FPSO) aspects of Operations Management.

Engineer

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

I am an enthusiastic professional who is willing to take a new challenging career with more than 10 years in oil and gas sector. To share my valuable technical knowledge, skills and experiences in Painting Corrosion Inspection (PCI), Welding Inspection (WI) and Non Destructive Testing (NDT). Focusing on compliance codes & standards and determining the best course of action.

Inspector, Engineer

Seeking a mechanical engineer position with a company that could allow me to utilize my experience, personal skills, and core of interests.

Engineer

I have experience 16 years for Marine and Protwctive Coating.

Inspector, Engineer, Supervisor / Technician

Detailed in resume

Manager

My name is Wan Fitri Daniel, a Mechanical Engineering Graduate from University Malaya. During my Mechanical Engineering Study, I was exposed with subject such as computational fluid dynamics, mechanics of material for static and dynamic structure and project management which strengthen my fundamental in engineering and project management. During my previous role as a Junior Quality Engineer in Hyoerwave System Engineering, I was experienced in TurnAround project (PCC for PSR-1 CDU-1/CFU Heat Intergration Project (CHIP) MRCSB TA 2024) and achieved mechanical completion on 20/2/2024. In this project, I was mainly developing procedure, coordinating testing and inspection, documenting reports and ensuring all the work done are complying with standard. Transitioning to my current job as Mechanical Design Engineer at GUTOR Electronics Asia Pacific Sdn Bhd, I able to challenge my skills in 3D Modelling while honing my skills in SolidWorks and Creo Parametric as I am responsible for creating 3D Models for North Field Expansion Project for LNG Onshore Facilities. Given my skills and experience, I am confident that I am the best candidate for your company.

Engineer

Results-oriented Engineer with a solid background in process optimization and improvement. Proficient in analyzing complex processes, identifying inefficiencies, and implementing innovative solutions to enhance productivity and reduce costs. Skilled in utilizing various tools and methodologies, such as Lean Six Sigma, time and motion studies, and process mapping, to streamline operations and improve overall efficiency. Ensure that all works go are correct and in accordance to specifications, drawings and standards required

Engineer

* Good knowledge & experience in

Engineer, Inspector

Marine Professional with more than 20 years experience in Ship Management, Shipbuilding and Ship Surveying. Area of specialization: Shipbuilding - New Construction project management. Marine survey - Class survey, Pre Purchase, Condition Survey, etc. ISM/ISPS/ML Audit - Audit and document review. Ship Management - Shore based ship operation, procurement, shore repair, dry docking, etc.

Engineer, Manager, Superintendent

Enthusiastic principle with over nineteen years of experience in the Oil & gas Offshore/Onshore facilities, power plant (geothermal, steam, gas-power plant, renewable energy), chemical and petrochemical (Brownfield / Greenfield plant). Well versed in materials selection, cathodic protection, protective coatings & painting, thermal and cold insulation materials, corrosion, pipeline, piping design and layout, piping materials component and selection of classes, pipe stress & flexibility, data analysis for failure analysis, and mechanical static in Basic design, Pre-FEED, Front End Engineering Design (FEED), Detailed Engineering Design, and Construction with many projects accomplished and was a great achievement. It has been achieved for about fifteen years in the oil and gas with 17 projects, seven years in the chemical and petrochemical sector with 8 projects, and four years in the power plant, geothermal, and renewable energy with 4 projects.   Developing specification of piping material classes, Valve material selection, wall thickness calculation, branch reinforcement, bend and mitter fittings, pressure capacity, hydrostatic test pressure, piping speciality items, data sheets as per ASME B31, ASTM, API, MSS, AWWA, and NACE, and not limited to developing the material's selection diagram (MSD), material selection report (MSR), corrosion allowance (CA) calculation, Corrosion Management Plan, Corrosion control philosophy, Corrosion aspect study, specifications, data sheets, piping index material classes, pipe stress analysis, through Root Cause Effect Analysis with Heat Material Balance (HMB), Utility Flow Diagram (UFD), Process flow diagram (PFD) as references to make them (MSD, MSR, CA) complete. As reaching out the service life design of equipments, piping systems, pipelines that it has to refer the international standards applicable, such as NACE MR 0175/ISO15156, NACE MR0103/ISO17495, NORSOK M-506, M-001, M-501, API 571 & 581, ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.8, ASME BPVC, ASME, ASTM, API, NACE, SSPC, NORSOK, ISO, DIN, NACE Publications, and etc.   Enthusiastic with artificial intelligence and clean energy to research to implement in the digital transformation and infrastructures energy, oil and gas, and other industries and can use machine learning models.

Engineer, Inspector

Regional coating and insulation Manager at Aker BP, Laem Chabang. Leading All surface protection, Insulations and Painting work Topside module newbuilding. Disciplines lead .Surface protection- Painting and Insulation at Equinor oil and Gas, Laem Chabang. Supervisor/Lead Critical Line /Night lead Offshore Hook up at Equinor ASA, Bergen Norway. SR. Field Engineer-Technical coating advisor at Equinor ASA, Aberdeen UK. SR.Paint superintendent at JOTUN /Havila Shipping, Frederikshavn DK. SR. Superintendent. Surface protection and Painting at Saipem/Fulcrum Offshore, Trondheim Norway. Senior Engineer. Surface protection. Insulation and painting at Aker Solutions -on/ Offshore, Stavanger Norway.Europe. Project Manager, Lead at OIS Offshore, Kristiansand Norway. Foreman / Project lead Surface protection and Painting at BMS Corrosion, Stavanger Norway. Foreman, Project lead Surface protection Painting at Solid Vedlikehold, Bergen Norway. Sandblaster and Painter. Foreman at Norblast, Stavanger Norway. Sandblaster rand painter at Bergen Group, Stavanger Norway. Sandblaster and painter at MAR-KEM GROUP, Drammen Norway. Soldier at Norwegian army HMKG. Production worker for ship equipment at Sagen shipping and sailing production, Kristiansand Norway.

Manager, Supervisor / Technician, Inspector, Engineer, Superintendent

Accomplished Protective Coatings Engineer with over 13 years of experience in the various engineering field including oil and gas sector, specializing in coating inspection and corrosion prevention. Certified IMM Coating Inspector Level 1 with expertise in SSPC, NACE, and ASTM standards. Proficient in project engineering, management, control, coordination, and estimation.

Engineer

To be a graduate Shipbuilding Engineer withspesialization in quality and inspection engineerin a worldwide company where my skills andexperience can be utilized to solve & analyzesteel structure fabrication defect such as welding and coating defect or corrosion formaintains and ensures quality the product ofstructure fabrication as per engineeringspesification.

Engineer, Inspector

OBJECTIVE : Quality Support Production & Construction Improvements Grandeo has been more than 18 years on INDUSTRY & MARINE Services. Specialty in Heavy Metals Productions, Modular Structures, Tank Farms, Spherical Tanks, Pressure Vessels, Boilers, Thickeners, Flotation Cells, Filters, Cranes, Machining Works, Piping and Ships Block. Being a Senior Quality Engineer under Mechanical Team, he also part to be a Surveyor, Authorized Inspector in workshop on project field Installations, keen to factory audit, TPI and Quality Management Support inspections, commissioning & supervisions, from materials receiving to final deliveries up to Customer Satisfactions of Product design, constructions of infrastructure, in-process, in-service and audit system. Currently, as owners representative for Agusan Power as Senior Mechanical QAQC for erections of Penstock 5.8D+2.9D Steel Liner and Surge Tank 35Dx19 construction and installation. Voith Francis Turbine 3x8mw Hydro Power Plant with 3KM Tunnel in concrete lining. Freelancer / Supplement for 3rd Party Inspection PMT-TPI appointments under BV + DNV + SGS or Direct Clients. Previously as Senior Supervisor under Local Aboitiz Team after China workload, The Project involvement is Petrochemicals Constructions Refineries of JG SUMMIT-BATANGAS in HDPE & PP Erections + Cracker Process, A Teamates for Fabrications + Construction responsible to activity in Erections of Structural Modules, Vessels Mountings & PID piping installations + tapping, test, punch & commission include manpower improvements + project flow technique & troubleshoot productivity, quality, responsibility of achievement level on client inspections to teams of supervisor, foreman, welders & fitters include quality team target dia-inch production of Inspections per piping lines class. Fabrications of 4-UNITS Radiant HEATERS Modules for Propane Dehydrogenation Plant – ONQUEST Export to Canada include parts accessories + insulations process. Previous Overseas SEAP as Owner's SQE Engineer for THICKENERS & FLOTATIONS by OUTOTEC. PMT-Engineer supply for Power Generation Plant – Open Cycle Natural Gas Feeding Turbine GE LM6000 PC Sprints Aeroderivative to burn Natural Gas & Liquid Fuel 97MW Avion

Engineer, Inspector, Supervisor / Technician

Please check the details

Engineer

1. Experience in statutory equipment 2. Experiance Painting and Insulation 3. Experience Piping and Tank 4. Experience Review design of Pressure Vessel 5. Experience as Reliability Engineer

Engineer, Inspector, Manager, Superintendent

Experienced engineer with a track record spanning over 12 years in subsea engineering in the oil and gas sector, possessing a comprehensive knowledge of cutting-edge hardware design technologies. Successful track record of managing projects across all phases, ensuring they are delivered punctually, within budget, and in accordance with stringent quality standards, thanks to the implementation of effective mechanical engineering approaches. Currently in pursuit of new, challenging opportunities to apply and expand this wealth of expertise and continue contributing to the industry's growth and innovation.

Engineer, Manager

A decisive, perceptive and resourceful engineer with excellent technical, analytical and communication skills with 10+ years experiences in varied disciplines of oil and gas industry.

Engineer