Pipeline freelance

·      Forty-three years in the Safety, Industrial & Petroleum Industry. [February 1979-Present]   ·      Sixteen years as the Senior Canadian [Newfoundland] Government OH&S Officer for the offshore drilling industry, service companies and industrial onshore sites.   ·      Twenty-one years overseas experience in hostile and harsh/ hostile environments in safety and training.   ·      Work & Regulatory experience on Semi-Submersibles / Jack-ups / DP ships / Barges / Tenders / Pipe Lay Vessels/ Production Platforms/ Land Drilling and Work Over operations.   ·      Safety Specialist/Manager for the Government of Saudi Arabia in Al-Jubal, K.S.A.   ·      Senior HSE Manager for Nabors Drilling International in Dhahran, Saudi Arabia.   ·      Senior HSE Advisor & HSE Manager for Pride International in Chad, Africa.   ·      PHSE Manager - Project Management Team for National Petroleum Construction Company in Abu Dhabi, U.A.E.   ·      PHSE Engineer - Project Management Team for Eni Iran BV in Darquain, Iran.   ·      PHSE Manager - Project Management Team for Angola Drilling Company in Luanda, Angola.   ·      Drilling Standards Safety Specialist for Brunei Shell Petroleum [BSP] in Darussalam, Brunei.   ·      Safety Engineer for Sonangol P&P in Luanda, Angola & Accra, Ghana.   ·      Senior HSE Advisor for Petro Canada in Tripoli, Libya.   ·      HSE Advisor for Flint Energy Services Ltd.  in Ft. McMurray, Alberta   ·      Senior HSE Advisor for Genel Energy International in Dahuk, Iraq   ·      Senior HSE Advisor for Sterling Energy International Ltd. in Sulaymaniyah, Iraq   ·      HSE Advisor for Onyx International Inc. in Saskatchewan, Canada ·      Senior HSSE Advisor with BP/ Rumaila Operating Organization [ROO] in Basra, Iraq.   ·      Drilling EHS Operations Team Lead for Tullow Oil in Accra, Ghana.   ·      Safety Training Coordinator for Smedvig Asia in Pointe Noire, Congo.   ·      Senior Consultant with National Safety Consultants Co. Inc. [1983-1988]   ·      Owner & Senior Consultant with World Wide Safety Co. [1996 – Present]   ·      President S & D Communications Ltd. [1988]   ·      Certified Competent Toastmaster [CTM] from Toastmasters International. [1990]   ·      Canadian Registered Safety Professional – CRSP [1989]   ·      Safety Degrees from the United Nations thru World Safety Organization [WSO] with two specialties as below.   ·      Certified Safety and Security Director – CSSD [1986]   ·      Certified Safety Executive – CSE [1986]   ·      Certified Safety Manager – CSM [1986]   ·      Certified Safety Specialist in "Occupational Health & Safety" [CSS OHS] [2002]   ·      Certified Safety Specialist in "Oil Well Drilling and Systems" – CSS [OWD&S] [2002]   ·      Certified Professional Manager – P. Mgr. [2007]   ·      Police Trained Professional Accident Investigator – RCMP & RNC [1980’s]   ·      Assisted in Investigation of the Ocean Ranger rig sinking disaster – [1982 – 1984].   ·      Government OHS Officer for the fabrication of the Hibernia GBS platform for offshore Eastern Canada.   ·       Countries worked – Canada/ Egypt/ Saudi Arabia/ Chad/ U.A.E/ Iran/ Angola/ Algeria/ Congo/ Ghana/ Libya/ Thailand/ Kurdistan/ Iraq and Brunei.   ·      International Membership in the Association for Canadian Registered Safety Professionals [1984].   ·      International Member in World Safety Organization - United Nations [1986].   ·      Member International Institute Risk & Safety Management [2012]   ·      Member Association for Canadian Registered Safety Professionals [1989]   ·      Government representative on Board of Directors “Safety Engineering Technology” Program for Memorial University of Newfoundland - Marine Institute of Canada [1984-1986].   ·      Refer " LinkedIn" professional profile –   https://www.linkedin.com/in/david-russell-crsp-cssd-cse-csm-css-ohs-owds-ctm-86a62a1b0/

Manager, Superintendent, Inspector

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Multi-skilled project management professional with more than 20 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

Graduate in bachelor of Mechanical Engineering from Andalas University with an interest in metallurgy and material. A fast learner person, highly motivated and great passion in EPCI industry. I have prior experience of 6 years as a piping engineer at Mcdermott Indonesia with a demonstrated history of working as detailed engineer, pre-commisioning, piping completion, reinstatement, create piping erection workpack by ASSET 55, and as FAT (Factory Acceptance Test) Engineer for subsea pipeline project of BP Tortue Phase 1A. Skilled with AutoCAD, Naviswork, Piping Process, Pipeline, Subsea Testing Methods, Pipe Stress Analysis. Registered as Professional engineers by PII (Indonesian Institution of Engineers).

Engineer

30 + Years: Started career from pressure vessel manufacturing industry for Refinery, petrochemical plant and boiler equipment and employed in the oil and gas industry Offshore and Onshore Projects pipeline, plant piping and above ground storage tank projects since 1993. Familiar with all aspect of the QHSE function from FEED, input to EPC bid/tenders' stage and participate pre and post tender clarifications, writing PMT procedures, review and approval.

Engineer, Manager

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

Senior Upstream Oil and Gas industry technical professional; over 25 years' experience providing solutions in demanding engineering, operations, and project management roles. Extensive global network. Key skills include: Comprehensive E&P Industry knowledge: Thorough understanding of the key fundamentals of the E&P industries' engineering disciplines. Proven ability to leverage these effectively to create business value and reduce HSSE risk. Project Management Exploration, Production Use basic and appropriate safety engineering practices, involve workforce in Process Safety, Improve safety culture, shared values in attitude and approach comes from leadership. Manage project delivery schedule, strictly implement project compliance to ensure project delivery complies with regulations. Responsible for project scope, schedule and cost, detailed planning and motitoring progress and delivery during the implementation phase. Operations Management: Expertise leading Field Development and Operational plans. Held line management project, production, maintenance & HSSE responsibility for complex offshore operation with annual CAPEX and OPEX budget. > $100M. Highly experienced and skilled in setting and managing budgets, operations and safety. FPSO's, subsea facilities and pipelines.

Engineer

Mechanical engineer experienced in maintenance, inspection, training and designing fields of fluid power systems, lifting, static and rotating equipment. Passionate in 3D designing, additive manufacturing, rapid prototyping, and simulation analysis. Attained the NCEES FE mechanical exam pass and eager to obtain the professional licensure.

Engineer, Drafter / Designer

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

A strong leader with 15+ years of offshore methods installation engineering and operations experience with excellent communication skills and a commitment to teamwork. Bachelor's degree in engineering (naval architecture) with over 15+ years of experience of engineering for major EPCI contractors and operators s in oil & gas installation industry. From offshore field engineer to offshore methods installation (and operations) engineer (senior and lead positions). Member of PMT on various projects through Europe, Middle East and Far East.

Engineer, Manager

Domingo V. Granado Jr. is a seasoned Piping Designer and Engineer with extensive experience in high-profile projects for elite EPCM companies. Notable contributions include work on RasGas Exxon Mobil and QatarGas ExxonMobil LNG Process Trains with Chiyoda Corporation, GLNG Upstream Project with SANTOS Australia at Fluor Philippines, and Chevron's Bibiyana Gas Field with Foster Wheeler Thailand. At Mitsubishi Heavy Industries, he played a key role in major chemical projects such as ExxonMobil's and SABIC Gulf Coast Growth Ventures, North American Growth and Baytown Expansion Projects. His practical Field Piping Engineer experience includes Petronas Sabah Ammonia and Urea Project and Qatargas Exxonmobil LNG Project. Spearheaded facility engineering and project management for industrial and commercial projects with Achievers Business Group Inc.

Engineer, Drafter / Designer

I worked in quality assurance and quality control for 20 years, I have developed a keen eye for detail and a strong understanding of quality control processes. My experience includes Oil & Gas, Pipeline, power, shipyard as Quality Lead Engineer, Coordinator and Manger.

Inspector, Manager, Engineer

Piping Designer with 6+ years of experience in the Oil & Gas industry. Skilled in AutoCAD 2D/3D, AutoCAD Plant 3D, and 3D modeling. Strong knowledge of piping design, drafting, and field measurement, with hands-on exposure to SmartPlant 3D (SP3D), AVEVA E3D, AVEVA PDMS, and CAESAR II. Holds a Bachelor’s degree in Mechanical Engineering from Mercu Buana University. Technical Skill: AutoCAD 2&3D AutoCAD Plant 3D AVEVA PDMS AVEVA E3D (Everything 3D) Smart Plant 3D (S3D) Piping Stress Analysis (Software Caesar II) Sketchup Microsoft Office: Excel, Word, Power Point Drone Pilot (Certified) Languange : Indonesian and English

Drafter / Designer, Engineer, Other

Dear Recruiter, Let me introduce myself, my name is Agung Setya Wicaksana, a highly motivated and experienced Project Engineer with 5 years of professional experience, I have gained extensive knowledge and skills in Engineering and Project Management, which I believe will be essential to help and enhance the operations of your company. I executed and managed projects, where I learned value engineering or best practices techniques and strategies that helped me in achieving project objectives. Besides, my strengths in problem-solving, planning, and teamwork have helped me excel in my previous role.  I was responsible for procedure or Method of Statement project execution, cost and budget management throughout the projects' lifecycle, and project expenditure. I have been involved in the planning and scheduling of projects, ensuring that they meet the required deadlines and other objectives. I have also been experienced in identifying issues that arise in projects, coming up with effective solutions in a timely manner while collaborating with team members and stakeholders to ensure timely execution. My team-oriented mindset helps me to work collaboratively with cross-functional teams, ensuring that everyone strives toward a common goal and I am eager to apply them to further advance my contributions to the company.

Engineer, Other

Results-driven Senior Project Engineer with 15+ years of expertise in EPC, EPCC, BEPCC, and LEPCC projects across Oil & Gas, Petrochemical, and Heavy Industries. Specializes in mechanical static & rotating equipment, piping, and structural works across all project phases, from engineering to commissioning and completion. Proven ability to lead multidisciplinary teams, manage complex project scopes, and ensure compliance with API, ASME, and ISO standards. Skilled in contract administration, technical bid evaluations, vendor coordination, and QHSE enforcement. Adept at optimizing resources, mitigating risks, and implementing change management strategies to deliver projects on time and within budget. A proactive leader with a strategic mindset, excelling in high-pressure environments to drive engineering excellence and construction success.

Engineer, Manager, Superintendent

Construction manager Aramco approved&approval from Saline Water Conversion Corporation SWCC&approval from the Saudi Council of Engineering (Engineering Expert) Dear Sir Kindly be informed that I am ready to transfer my IQAMA immediately. I am currently available in Saudi Arabia, and I have a total of 20 years of experience in the Kingdom of Saudi Arabia . I have approved Aramco. I have approval from Saline Water Conversion Corporation SWCC. I have approval from the Saudi Council of Engineering (Engineering Expert) I have approval from the Saudi Council of Engineering. Transferable Iqama/Applicable immediately. Current Location :Makkhe- saudi arabia Current Company: Binladin grop (Abdal) Current Designation:construction manager A driving license in Saudi Arabia is available. Attached are my contact details and a detailed CV. Thanks and regards Yasser Dyab mr_yassr2006@yahoo.com [mr_yassr2006@yahoo.com] Mob. # 00966504911076 and 00966590249134

Detail-oriented Mechanical Engineering graduate with 2 years of experience in the oil and gas industry, specializing in Asset Reliability, Availability, and Maintainability. Proven track record of contributing to Turnaround and Inspection teams, with hands-on involvement in asset integrity, corrosion management, and regulatory compliance. Strong technical skills, paired with a problem-solving and analytical mindset, allow for effective decision-making in fast-paced environments. Passionate about continuous learning and eager to contribute to dynamic engineering teams that drive operational excellence.

Engineer

Project Engineer with over 14 years of experience, specializing in large-scale oil and gas offshore/subsea EPCI. In-depth experience and knowledge for any project phases (Engineering, Procurement, Fabrication, Offshore Installation, Hook-up, and Commissioning). Holding a master's in Subsea Engineering, I currently apply my expertise in leading innovative Offshore Carbon Capture and Utilization projects at Saipem Indonesia. Having excellent interpersonal communication skills in multi-cultural/multi-national environments. My focus remains on driving growth in the oil and gas sector while embracing challenges for greater responsibility.

Engineer, Supervisor / Technician, Superintendent

graduated in

Drafter / Designer

PROFILE

Supervisor / Technician

Managed EPC projects

Manager

I’m a Civil Engineer with work experience of 33 years in project management, construction site supervision, detailed engineering and construction of civil works, heavy steel fabrication, load-out, transportation, erection works, offshore installation, heavy lift, brown field works, hook-up and commissioning in oil and gas industries specifically in offshore platforms and jackets, pipe racks, power plants, refineries, FPSO topside and other related works for civil works and steel structures. - Project engineering experience, supervising contractors' execution of engineering design, equipment and materials procurement, module fabrication, transportation, offshore installation, and civil works.

Engineer, Manager, Superintendent, Supervisor / Technician