Piping freelance

Enthusiastic principle with over nineteen years of experience in the Oil & gas Offshore/Onshore facilities, power plant (geothermal, steam, gas-power plant, renewable energy), chemical and petrochemical (Brownfield / Greenfield plant). Well versed in materials selection, cathodic protection, protective coatings & painting, thermal and cold insulation materials, corrosion, pipeline, piping design and layout, piping materials component and selection of classes, pipe stress & flexibility, data analysis for failure analysis, and mechanical static in Basic design, Pre-FEED, Front End Engineering Design (FEED), Detailed Engineering Design, and Construction with many projects accomplished and was a great achievement. It has been achieved for about fifteen years in the oil and gas with 17 projects, seven years in the chemical and petrochemical sector with 8 projects, and four years in the power plant, geothermal, and renewable energy with 4 projects.   Developing specification of piping material classes, Valve material selection, wall thickness calculation, branch reinforcement, bend and mitter fittings, pressure capacity, hydrostatic test pressure, piping speciality items, data sheets as per ASME B31, ASTM, API, MSS, AWWA, and NACE, and not limited to developing the material's selection diagram (MSD), material selection report (MSR), corrosion allowance (CA) calculation, Corrosion Management Plan, Corrosion control philosophy, Corrosion aspect study, specifications, data sheets, piping index material classes, pipe stress analysis, through Root Cause Effect Analysis with Heat Material Balance (HMB), Utility Flow Diagram (UFD), Process flow diagram (PFD) as references to make them (MSD, MSR, CA) complete. As reaching out the service life design of equipments, piping systems, pipelines that it has to refer the international standards applicable, such as NACE MR 0175/ISO15156, NACE MR0103/ISO17495, NORSOK M-506, M-001, M-501, API 571 & 581, ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.8, ASME BPVC, ASME, ASTM, API, NACE, SSPC, NORSOK, ISO, DIN, NACE Publications, and etc.   Enthusiastic with artificial intelligence and clean energy to research to implement in the digital transformation and infrastructures energy, oil and gas, and other industries and can use machine learning models.

Engineer, Inspector

Lead Piping Stress Engineer with 11 years experience, i specialized in Piping Stress Engineering using different piping codes (B31.3/EN-13480-3) with also relevant experience in the nuclear industry. Including special element selections (variable Supports, Expansion bellows, etc.) I am also able to develop Steel Structures Calculation using European Code or other equivalent code

Engineer

A Graduate Metallurgical Engineering, Welding Inspector from B4T & IIW, ASNT Radiography Interpreter Level II. Having capabilities for preparing and reviewing QA/QC procedures, ITP, P&ID, welding inspection, material inspection and selection, measurement, welding procedure qualifications, welding performance qualifications, NDT, DT, QA/QC reports, interpretation film radiography (quality of film radiograph and quality of product) and familiar with international codes and standards such as (ASME, AWS, ISO, API, etc) and CAD software (AutoCAD). I am looking for opportunities to be able and contribute further to the industrial world to apply my knowledge and interested.

Inspector, Engineer

Professional Profile Experienced Design/Drafting Piping/Process/Process Safety for Design Competition, FEED, Detail Drawing using Auto CAD/ MicroStation for Oil and Gas Onshore/Offshore and Petrochemical Project. Several times working for Prepare data material to input CQS system. Piping Quality Control, Piping Inspector, Piping test package/Punch List at fabrication and Field Construction Career Objective I am seeking a position which will allow me to apply and enhance my skills of being SP3D Designer Piping Process/Process Safety, Piping. But it does not rule out the position of the piping test package/punch list because I have that experience. In addition, I am eager to contribute my knowledge, experience and hard work towards the success of your company and to the growth of the fast-developing field.

Drafter / Designer, Inspector

Seasoned Mechanical Engineer with 20+ years of experience in Oil & Gas, Offshore Construction, and Mechanical Static Engineering. Proven track record in executing offshore rejuvenation projects, managing multi-disciplinary teams, and ensuring compliance with safety and quality standards. Adept at project lifecycle management, technical troubleshooting, and delivering engineering solutions under high-pressure environments.

Engineer, Superintendent, Supervisor / Technician, Manager

Dynamic and results-driven Project Engineer with over 7 years of hands-on experience in the construction and oil & gas industries. Proven track record of successfully managing complex projects from conception to completion, ensuring adherence to budget, schedule, and quality standards.

Engineer

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

I'm an Enthusiast, honest, self improve, and energetic personality

Inspector

PROCESS ENGINEERING OIL & GAS Professional Process Engineer with excellent technical, analytical and communication skills combined with strong process engineering and multi-discipline base, demonstrated by over 10 years of extensive experience in detailed design and operation of Oil & Gas industry. Skilled and experienced in: - Process Simulations and Hydraulic Calculations - Development of PFD, P&ID, LDT, and H&MB - Creating Process Basis of Design, Control Philosophy, and Shutdown Key - Sizing of Process Lines, Process Equipment, PSV, and Control Valve - Flare Analysis Study and Utility Load Calculations - 3D Model review, HAZOP Study, SIL and PHA meetings - Plant Troubleshooting, Commissioning, Start-Up, and Turnaround activities

Engineer

Experienced and results-driven Senior Quality Inspector with over 18 years of progressive expertise in quality assurance, welding inspection, and fabrication oversight within the oil & gas, offshore, Pipeline offshore, pipeline onshore and onshore construction sectors.

Inspector

I am working as an Aramco Approved QC Manager with CAT Group at URMP Pipeline Project, Jaffurah, Saudi Arabia. Having more than 17 years of experience with different organizations. I am having Accredited Project Manager, ISO 21500:2021, 9001:2015, 45001:2018, CSWIP 3.1, ASNT NDT LEVEL-II PAUT/ToFD/RT/MT/PT techniques and Six Sigma Black Belt Certification. Most of the experience in QA/QC & Execution of projects. I have a sound grip on International Standards and Codes used to make sure the procedures/policies/standards & quality in Oil & Gas Sector projects.

Manager

-I am able to handle multiple tasks on a daily basis. -I use a creative approach to problem solve. -I am a dependable person who is great at time management. -I am always energetic and eager to learn new skills. -I have experience working as part of a team and individually.

Engineer

Having experience more than 10 (Ten) years in Inspection & Quality Control including supervision & coordination, inspection and responsible for general quality control activities to confirm that they comply with specified procedure or Client requirement. Having experiences of job covering in QA / QC as Welding Inspector , NDT Inspector are in fabrication , erection and installation of piping fabrication installation of various material ( CS, SS, Duplex , FRP , PVC ) , pipeline fabrication installation both onshore & Offshore

Inspector, Engineer

Profession: 22 years' Experience as a Certified QA/QC Inspector Welding & Painting / Tanks / Piping / Structures / Cross Country Pipelines / Piping Isometric checker / ISO / Pre-Fabrication / Fabrication shop & site / Offshore - Subsea Pipeline / IHUC - Offshore Platform Jacket Installation & Hook-up & commissioning / Offshore wellheads Structure fabrication & Piping skids, NDT Coordinators / PAUT with TOFD & AUT discontinuities analysis & RT Film Interpretation / Punch list Coordinator.

Inspector

Experienced Mechanical Engineer with over 19 years of success in EPCC projects, specializing in Project Execution, Civil works, Mechanical Work, Pipelines & Piping System works, Construction Managing and Supervision. Proven ability to lead multidisciplinary teams on high-value Oil & Gas, Petrochemical, and Smelter projects. Skilled in project planning and managing, Work Packages, Construction Engineering, QA/QC, HSE Compliance, Contractor/Subcontractor Management, Stakeholder Management and Mechanical Completion through Commissioning.

Manager, Superintendent

I have strong knowledge, Leadership & soft-skill in the QA/QC scope of work and also professional experience in oil & gas offshore / onshore like fix platform (Jacket & Topside), FPSO Topside module, Petrochemical, Refinery unit, Power plant, Fabricator, Bridge with welding connection, Structural, Piping, Pipeline spool (include Riser pipe) & Yard Fabrication withvarious position Asst. QC Inspector, QA/QC Inspector, QC Welding Inspector, QA/QC Engineer, QA/QC Coordinator, Deputy Quality Manager, Chief QA/QC or QA/QC Lead. I am Certified & qualified for CSWIP 3.1 Welding Inspector, Bachelor applied science in Welding Engineering, ASNT NDT Level II in Dye Penetrant Testing, Magnetic Particle Testing & Radiographic Testing Film Interpreter. Should be to rest CLIENT Specification, Code / Standard, Quality Manual, Work Instruction / Method statement. Our team achievement on the previous project is speed up document, especially NDT report must be ready at the CLIENT before PJSM (pre-job safety meeting) and then 3 times of erection can do it without backlog / bottle-neck document in QA/QC Department.

Inspector, Engineer, Other, Supervisor / Technician

Overall 16 years of working experiences with EPCIC/EPCC project for offshore platform (Modular, WHP and CPP platform), HUC brownfield, onshore refinery/petrochemical (construction & brownfield) and FLNG project for reputable local and international client such as Sarawak Shell, ONGC, KPOC, LUNDIN, Shell Australia and PETRONAS.

I am experienced in oil and gas company over 12 years, i have background from Associate’s Degree of Mechanical Engineering. Related experience working in Quality department until 10 years and 3 years as assistant structural/piping supervisor. During as Quality, i was experience of jacket and topsides, jacket foundation of windfarm, piping, mining surface part, ship building fabrication, inspections related carbonsteel materials, stainless steel, Mining Surface Product, piping completion system, and pre-commissioning activity. Also having knowledge in engineering, manufacturing, familiar with international codes and standards. This involved shop fabrication to site construction, and erection, quality assurance and quality control for steelworks as material receiving inspection, prefabrication, blast and paint, field assembly, installation, inspection, testing, handover works for steel structures, piping, storage tanks and pressure vessels, Onshore Pipeline fabrication, More other phases of the works in oil & gas industries including onshore fabrication, and load out process.

Inspector, Engineer, Supervisor / Technician

• A Piping Design Engineer with around 8 years of work experience has worked on multiple projects in various domains of Oil and Gas/Petrochemicals/Power industry in both Green and Brown field projects in FEED and detailed engineering. • Conversant with relevant piping codes (ASME B31.3, B31.1, B31.4, B31.8, ASME SEC VIII Div. 2 Part 5, CAN Z662, API 610 API 662, API 661, API 650, API 520, API 611, API 612, WRC 107/297

Engineer

I am a Senior Project Engineer with focus on Construction and Project Management with more than 15 years of experience in the Oil and Gas Industry. Has been involved in several projects with total cost of up to USD100m.

Manager, Engineer

Dynamic professional with 19 Years of experience in Quality Control, Inspection Engineer, Project Engineering & Project Execution of, Oil Refinery, GC, Booster Station, Pipeline Project, Pipeline Pre- Commissioning Pipeline Maintenance, Mechanical Completion, FPSO, FSO, Turret, Topside & Offshore Projects.  Working with NMDC as a Sr. QA/QC Engineer in LOWER ZAKUM LTDP-1, EPC WORKS FOR EPC-2 AND PDP PROJECT @ Abu Dhabi, UAE.  Bachelor’s Degree in Engineering (B.E) – Mechanical Engineering.  Excellent communication & interpersonal skills with strong analytical, team building, problem solving, learning and organizational abilities.

Inspector, Manager, Engineer, Superintendent

I plan to seek a new opportunity. I have experience working as a QA/QC inspector in the Oil and Gas industry. I believe there is a perfect alignment between the goals of your organization and my learning at previous learning experiences, including skills and long-term career goals. I am detail-oriented, highly self-motivated, and adaptable. I have an outgoing personality and thrive in team-oriented environments with opinionated traits, and excel in the usage of computers. I am including my curriculum vitae for you to look over. Please feel free to call me at +60104305515 or email me at nadzifmuhammad09@gmail.com [nadzifmuhammad09@gmail.com]. Thank you for your time and consideration. I look forward to hearing from you.

Inspector, Engineer, Supervisor / Technician

Dedicated Material Coordinator with 8+ years of experience in offshore logistics, material planning, and supply chain coordination for major oil & gas projects. Proven track record supporting EPCIC works, including pipeline replacements and topside modifications (e.g., PL431, PL436, PL314) and brownfield campaigns such as the Kinabalu NAG Development Project. Skilled in end-to-end material tracking, warehouse operations, and offshore mobilization, with strong knowledge of project documentation, MIV/MR systems, and HSE compliance. Adept at liaising with procurement, fabrication yards, and marine teams to ensure timely, accurate material delivery in high-pressure environments. Committed to operational efficiency, safety, and supporting offshore project success through precise material control and logistics execution.

Other

* Asset Integrity Management * Preventive Maintenance * Able to read and interpret Engineering drawing, P & ID, GA drawing * RCM * Bill of Materials (BOM)

Engineer, Manager

Detail-oriented Project Engineer with over 2 years of hands-on experience delivering mechanical and piping systems across EPCC projects in the Oil & Gas sector. Adept at coordinating cross-functional teams, managing procurement, developing technical documentation, and driving on-site execution. Holds a Bachelor's in Petroleum Engineering with a specialization in Drilling. Seeking to contribute to dynamic roles in Petroleum, Project, or Piping Engineering.

Engineer