Piping freelance

For over 30 years as a professional in welding industry we've gone thru far most every aspect of the steel industry. Our services are: Inspection, 3rd party- , vendor inspections, Global expediting, Construction- Quality management, Production, Awe always go for the highest standard in our job. We give our selfs for more than 100%. We are always eager to learning are technicians thru and thru. Always go for full satisfaction of the project. We operate globally.

Supervisor / Technician

I am a bachelor of material and metallurgical engineering, after I graduated I took a welding inspector certification, and started my experience as a welding inspector until now. Lastly I worked as an owner at PT Pertamina Balikpapan refinery

Inspector

I am a skilled professional with extensive expertise in Piping Engineering and a strong understanding of industry standards such as ASME, API, and ASTM. My capabilities include both technical and practical engineering design, with a particular focus on the following areas: * Proficient in analyzing forces and stresses on piping systems, including Primary, Secondary, and Peak Stress, based on ASME B31.3, using both manual calculations and CAESAR II software. * Expertise in evaluating the impact of piping supports on load distribution within piping systems. * Skilled in interpreting pipeline systems and analyzing pipeline routes using isometric drawings. * Experienced in material requirement calculations based on P&ID and design drawings. * Knowledgeable in ASME VIII Div. 1 & 2, with the ability to perform calculations and analysis using PV Elite software. * Familiar with API 650 standards, specializing in Tank Handling through manual calculations and Hexagon software analysis. * Experienced in fluid handling and analysis for liquid and gas systems, adhering to ASME B31.4 and B31.8 standards. * Proficient in reading and interpreting technical drawings, including PID, PFD, Isometric Drawings, Plot Plans, and General Arrangement diagrams. * Capable of conducting equipment age assessments and risk analyses in accordance with ASME FFS-1 and API 580 & 581 standards. With a comprehensive skill set and a strong technical foundation, I am committed to delivering high-quality engineering solutions.

Engineer

CAREER SUMMARY (Overall Piping Activity Capabilities) • Experience in Proposals & Detail Engineering with commendable knowledge on Raising CI & TQ. • Interpreting key documents; Piping standards, P&ID, Feed Documents & Bid Documents. • Initial study of Piping Layout (detail engineering) for all large bore and critical Lines. • Estimating Preliminary Layout MTO for Material Requisite and Procurement. • Coordination with Specification & Stress Analysis Team for freezing Overall Piping Layout and Equipment Layout as Area Lead. • Vendor offers & Vendor GA review wrt Layout and qualifying Same. • Preparation of Nozzle Orientation Dwgs based on Piping Layout and convey same to Vendor. • PLANNING OF ACCESS WAYS AND ESCAPE ROUTES AS PER SAFETY STD. • Preparing Weight Control Reports for entire Offshore Platforms, Modules & Packages as a part of Input to Structural and Installation teams. • Inter Disciplinary Coordination for deliverables and other Layout items

Engineer

Totally 17 years' experience in fabrication, construction, installation and hook-up/tie-in for Jackets, Process Modules, Topsides, E-houses, Pipe Racks, Piping Spools Fabrication, Pipeline, Valves, Structural, Shipbuilding, Living Quarters, Substation, and others facilities project for offshore and onshore. 13 Years experience in Quality Control and Technical Inspection activities to meet the project Specification requirement, dedicated people and manage with an emphasis on the teamwork. I am self-motivated with teamwork oriented, honest, cooperative, coordinating point of view, communicative, and respectful. Proficient Computer skills in MS Offices, MS Project. Familiar with most of project reference documents: Specifications, ITP, Drawings, Codes, Standard, Rules, Procedures, TQ, and Method Statements, etc.

Inspector, Engineer

I am 43 years old with 20 years of work experience, most of which was involved in Engineering, Procurement, Construction, Commissioning and Operation & Maintenance work in Oil & Gas (Offshore & Onshore). I am used to being highly committed to the implementation if safety regulations in both Offshore and Onshore environments as i have been involved in working in several Oil & Gas company. Career objective : ·      Associate Reps. Field Construction Engineer, has more than 6 years’ experience in fabrication and installation onshore and offshore. ·      Sr. Piping Engineer, Has more than 14 years’ experience in mechanical and piping area plant, onshore and offshore for both engineering and construction.

Engineer, Supervisor / Technician

Experienced shipbuilding engineer. Specialized in hull and Outfitting inspections. Focused on communication and problem solving. Finished VT1+2 and International Coating Inspector(level 2) courses.

I graduated in mechanical engineering from Andalas University . I have experience from several companies which are manufacturing companies, maintenance and service companies, process and pipeline services for oil and gas sector at LNG and refenery . Support and lead pre-commissioning activities in the field of flange management and pipe testing (leak tests, blowing tests, drying tests, pneumatic tets). Support pre-start up activities in the form of verifying punchlist status of pipe joints per system between database and actual field before the system is handed over to the client. Have knowledge and familiarity with flange management, have knowledge of P&ID and isometric drawings supported by having carried out line checks for pipe testing such as leak tests, pneumatic tests, drying tests and blowing tests.

I have more than 28 years of experience in Oil & Gas, Hydrocarbon, Infrastructure, Power field and Renewable / Green Energy including Executive and General Management, Projects & Engineering Management, Procurement and Construction of Oil Refineries, Gas Plants, Off-Shore Platforms, Deep Water, SURF, FPSO, Petrochemicals, LNG Plants, LPG Plants, On-Shore & Off-Shore Pipelines and related utilities. n Executive Management n Project & Engineering Management / Interface Engineering & MOC n Development and Growth n Green Energy (Green Hydrogen & Ammonia), Power to X, Sustainability, CCSU n Infrastructure / BIM (Building Information Modelling) / Building Automation n Operational Excellence  n Life of Field / IMR / RBI Management n Crisis Management / Risk Assessment and Mitigation n FEED / EPC / PMC (Green / Brown Fields) n Deep Water / SURF / Marine / ROV’s / SPCS / IWOCS / FPSO / Umbilical’s Systems & Electrical

CAREER SUMMARY

Im a profesional piping engineer with discipline piping Construction, and im want to be learning more for the future of my knowledge

Engineer

To obtain a full-time position in the field of mechanical engineering and process engineering utilizing my ten (10) years of experience with analytical and leadership skills. A communicative, encouraging team player who presents ideas effectively and is able to assist others in the latest procedures. Skilled in a large number of technical packages. Quickly surpassed expectations in design as well as in end-to-end project management.

Engineer, Manager

Diploma holder in Mechanical Engineering from Ungku Omar Polytechnic with additional certification in CSWIP 3.0 Visual Welding Inspector, CSWIP 3.1 Welding Inspector and CSWIP Radiographic Interpretation of Welds. Having more than seven (7) years of experience in quality control inspection, welding procedures, offshore hook-up, onshore piping and structural fabrication, mechanical and installation as well as onshore pipeline.

Inspector

A mechanical engineering graduate from University of Malaysia Sarawak (UNIMAS) with an interest in the dynamic realm of the engineering industry, specifically in oil and gas industry. Armed with a solid academic foundation and a drive for innovation, actively seeking opportunities to apply mechanical engineering knowledge and skills to contribute meaningfully to the advancement of the industry. Focus on efficiency, sustainability, and safety, dedicated to making a positive impact in the sector while continually expanding knowledge and skills.

Engineer

11 years of total experience

Engineer

Highly reliable and resourceful engineer competent to complete innovative projects with little Management direction required. Currently pursuing new opportunities worldwide.

Engineer, Manager

I have work experience of more than 15 years in the Oil and Gas Professional Engineer having hands-on experiences in Green Field or Brown Field at Offshore Project, Onshore Project. The combination of Engineering and project execution skills strengthen my contribution of the successful and safe execution of project during FEED, Detail Design Engineering, Construction, Commissioning and Operation phase at Onshore and Offshore Project

Engineer, Manager, Superintendent

* A lot of experience since 2012 in technical fields EPC FED & FEED activity including Construstion Activity and QA/QC Inspection at various industry EPC Construction and Turn Around Maintenance Activity, Pre-Commissioning & Commissioning – Start Up (Oil & Gas, Petrochemical, Fertilizer and Mining). Familiar with Static Equipment, Rotating Equipment, Mechanical Package, Piping, Structure and Preservation. 

Engineer, Inspector, Supervisor / Technician, Superintendent, Manager

I have a double major in civil-structural and mechanical engineering. Proven leader and adept project supervising with more than 14+ years of extensive experience in quality control, construction and commissioning of structural and mechanical (stationery and machinery).

Engineer

PT NINDYA KARYA Assistant Quality Control (December 2022 – April 2023) DEVELOPMENT OF IRRIGATION NETWORK REHABILITATION OF D.I SEI ULAR(PERBAUNGAN) SERDANG BEDAGAI DISTRICT * Implement safety, occupational health and environment at work locations * Checking the materials before loading the operator * Loading Truck Mixer at Batching Plant * Check the quality of concrete from start to final casting according to company standards * Slump test testing before casting in the field * Taking concrete samples in the field * Carry out concrete ordering schedules for each casting zone * Casting documentation * Make daily concrete casting reports * Measure the length and width of each precast * Carrying out soil samples (sandcone) 

Drafter / Designer, Engineer

30 years working experience in Oil n Gas Offshore, Onshore and Marine Industry. Role and responsibility in Managing Team as team lead, Manpower, Cost Control, Project Budget, Planning. Handle Project from Feed - Detail design engineering - Procurement - Construction Commissioning, (EPC).

Accomplished Mechanical Engineer with over a decade of experience in quality control, construction management, and mechanical inspection across various high-profile projects. Proven expertise in team leadership, project management, and problem-solving. Demonstrated ability to manage and oversee complex construction activities, ensuring adherence to quality standards and client specifications. Skilled in advanced welding technologies and inspection techniques, with a strong background in HRSG erection and NDT processes. Holds a Bachelor's Degree in Mechanical Engineering and numerous certifications, including PMP, NEBOSH, and CSWIP 3.1 Welding Inspector Level 2. Fluent in English and Arabic, with a solid track record of delivering successful projects in diverse environments .

Engineer, Manager

Description : 6 year working experience in construction and over 4 years in oil & gas related field as Structure Engineer. Involved extensively in onshore & offshore structure design, conceptual and detailed design, basic engineering, layout development, project engineering, modification, construction, fabrication, installation and site survey. Familiar with local and international client such as PETRONAS, HESS, etc. standards as well as international codes and standards such as DNVGL, AISC and ABS.motivated and passionate person in every project involved from design phase until construction stage.

Engineer

To shortly introduce myself, my name is Md. Jual Afsar and Graduated from Sonargaon University, Dhaka. Technology in Mechanical Engineering. Also Post Graduated from Southeast University Dhaka ,MBA-Master of Business Administration (Major MIS) of The Southeast Business School I am working with Suez fence in 500 MLD Ganadharpur water treatment Plant under Dhaka wasa project . Dhaka Bangladesh, Recently I have completed Dhaka Metro RAIL Project under DMTCL with NKDM ASSESSOCATION under employee DDCL Dhaka Bangladesh    I AM WRITING TO EXPRESS MY INTEREST IN THE POST OF APPLICATION APPLY FOR QA/QC MECHANICAL INSPECTOR . I AM CONFIDENT THAT MY TECHNICAL KNOWLEDGE AND RELATED EXPERIENCE CAN CONTRIBUTE TO YOUR TEAM.     I would welcome the opportunity to discuss how my expertise could contribute to your company , you can find my CV and references. If you have any questions, you can reach me by phone: +8801823465561 and e-mail: Juwel.me95@gmail.com [Juwel.me95@gmail.com].   Thank you for taking the time to read my application and for your consideration! -- -- Best Regards,   Md.Jual Afsar QA/QC Mechanical inspector  B.sc in Mechanical Engineer, MBA Management , NDT Level II (UT,RT,MT,PT,VT)    

Inspector, Manager, Superintendent