Process freelance

Senior QA/QC Engineer with more than eight years of experience in the Water and Energy industry, complemented by a bachelor's degree in mechanical engineering and registered Graduate Engineer with the Board of Engineers Malaysia. Recognized as a Certified Lead Auditor in ISO 9001 and Lean Six Sigma Green Belt, showcasing proficiency in implementing and enhancing quality management systems. Proven expertise in conducting comprehensive audits, ensuring regulatory compliance, and driving continuous improvement initiatives. Skilled in global collaboration, adhering to international standards, and optimizing operational efficiency. Experienced in maintenance and management of equipment, utilizing technical acumen to maximize reliability and performance. Committed to ongoing growth and leveraging diverse quality frameworks for organizational excellence.

Engineer

Fresh Graduate in Chemical Engineering with a strong desire to expand knowledge in the industry. An inquisitive person that enjoys learning new concepts and applying logical solutions to challenges. Actively involved in various organizations and committees, so equipped to work both individually and in teams, adapt easily, manage time efficiently, and demonstrate strong communication and leadership skills. Familiar with Chemical Engineering softwares such as Aspen Plus, ChemCAD, Ms Visio, and also well-versed in creating & interpreting PFDs. Possess experience in conducting chemical engineering laboratory research, performing sample testing, and analyzing research results. Have the highest interest in oil & gas industry.

Engineer

My working experiences it makes me perform good monitoring critical parameter to the unit and respond quickly during any emergency circumstances. Monitoring and Executing Permit to Work System and Perform LOTO system as part of Risk Management. Performed assessment of work order notification through Maximo correspond to Reliability and Availability Operation. My present responsibility includes: 1. Safe Start up, shutdown and synchronization of unit 2. Smooth and efficient operation of CCGT 1760 MW and its auxiliaries. 3. Preparation of Daily, Monthly and Yearly Plant report 4. Optimization on auxiliary power, water and fuel consumption for generating the same output MW 5. Decision maker during emergency with consulting Station Manager if time permits. 6. Make Co-ordination with mechanical, electrical and instrumentation department.

Engineer, Manager, Superintendent, Supervisor / Technician

I would like to present my ability in Offshore Process & Piping and Pipeline Design. Have a lot of experience in brownfield engineering and wellhead platform design. First step you should give a chance to brownfield modification project, and wellhead platform projects. I have good ability to review the process/piping design document

Detail-oriented, organized and meticulous employee. Work at a fast pace to meet tight deadlines. Enthusiastic team player ready to contribute to company success. Skilled in working under pressure and adapting to new situations and challenges to enhance the organizational brand.

Engineer

Mechanical Rotating equipment and Package Engineer possessing competent technical skills in Feed/Basic/Detail engineering projects in Chemical, Petrochemical, Refinery, Offshore, Oil & Gas, Energy industry.

Engineer

Process engineer passionate by engineering projects like EPC from basic studies, design, procurement, construction to commissioning. My skills range from process simulation, equipment sizing to technical notes writing. I stay tuned to challenging opportunities

Engineer

Proven ability to manage projects and lead teams backed by current work experience in Piping industry. I have over 4+ years of overall experience. Piping Engineer with 2+ years of progressive experience and 2+ years of experience as piping draftman. Energetic self-starter and team builder. Navigates high-stress situations and achieves goals on time and under budget.

Engineer, Drafter / Designer

Process Engineer with extensive experience in process engineering design, pre-commissioning/commissioning & start up and plant operation in petrochemical, LNG, copper smelter, and utilities & energy industries. Skilled in process engineering design, process safety management, unit operations support, system monitoring and optimization, and turnaround support. Proficient in English and Bahasa Indonesia, with strong computer literacy in Microsoft Office and simulation software (ASPEN HYSYS).

Engineer, Manager

Process Safety Engineer at NRGtech Services since October 2022. Worked in various roles including technical engineering, business development, project engineering, as well as mentorship of interns and fresh recruits. Process safety experience includes loss prevention, risk analysis, safety studies of brown field and green field projects in several design phases - Concept, FEED, and Detailed etc. experience in carrying out various process safety studies such as HAZOP, HAZID, SIL Classification, SIL Verification, Process Safety Assessment, F&G Detection and Mapping, Hazard Consequence Modeling etc. Knowledge of LOPA, Shell DEPs pertaining to Fire Safety, DNV Recommended Practices for Dropped Object Study, etc.

Engineer, Manager

a final year student majoring in instrumentation engineering sepuluh nopember institute of technology surabaya looking for opportunities in instrumentation and control, calibration, IoT engineer, Web developer. Software engineer, Cloud engineer. With a relentless ambition and a profound passion for excellence. Fueled by the desire for challenges and new experiences, Herdika is committed to making a significant impact in the field of instrumentation engineering. His primary focus lies on industrial instrumentation equipment, PLC, DCS, SCADA, sensors, troubleshooting and maintenance, and programming. With a proven track record of leadership, Herdika possesses robust time management skills and exceptional problem-solving abilities, thriving in fast-paced environments. Known for his approachable nature and unwavering enthusiasm for continuous learning, Herdika actively engages in various extracurricular activities.

Engineer, Drafter / Designer, Supervisor / Technician, Inspector

Experienced in Coal Fired Steam Power Plant for 10 years

Superintendent

Environmental engineer and sustainability professional who comes with experience in a consulting environment identifying, defining and providing solutions to critical environmental issues. Skilled in preparing technical reports, conducting assessment for environmental issues and proposing mitigation measures for clients with projects in manufacturing, construction, renewable energy and oil and gas. Knowledgeable on decarbonization strategies, policies, trends and regulations. Acquired business development acumen and skilled in stakeholder management. Prepared to embark in a technically challenging and hands-on project environment working on impactful projects while making a positive impact to the company growth.

Engineer

5 plus year experience in field of Process Engineering includes experience of FEED, Detail and Basic engineering in various streams including Oil & gas, Petrochemical and Chemical along with field engineering support to construction team, pre-commissioning, commissioning and plant start-up. Responsible for the process engineering discipline in Polypropylene Unit. Hands-on experience in all aspects of process deliverable development such as Scope study & Man-hour estimation, Deliverable list, PFD, HMB, P&ID, Hydraulics, Equipment process and instrument data sheet, Simulation, Relief Valves Sizing, Relief and blow down summary, Logic description includes PLD reviewing, Cause & Effect diagrams, Utility summary, Operating manual, Participation in HAZOP, FAT, SAT, Fire water demand calculation, Technical support to Procurement team, etc. Clarify process strategy and requirements with BID owner. Participate in project internal & external meetings, inter-discipline to discuss/ clarify process issues and engineering activities. Co-ordinate with Licensor and Licensees for resolution of any errors and deficiencies in LICENSOR’s Process Design Packages (PDP’s) and management of any other deviations.

Engineer

Manufacturing, 3P and people management. Sustainability, energy efficiency, decarbonization and ESG. Project management, process development and continuous improvement. Electroplating and semiconductor process. Supply chain, value stream map, inventory management, budgeting, and forecasting.

Manager

Bachelor in Mechatronics Engineering, experienced Project Manager skilled in leading EPCC of Solar PV systems for major clients like Gentari and TotalEnergies, ensuring timely and high-quality results. Expert in cross-functional collaboration, financial management, and client relationship development. Proven track record in maintaining safety and quality standards, optimizing equipment management, and enhancing operational efficiency. Adept at software development, system migration, and stakeholder communication, driving successful project outcomes and operational excellence.

Engineer

As Operator Production Division at PT.Pertamina Hulu Mahakam (PHM) - Responsible For The Production process originating from the peciko area platform to be exported to the peciko process area in senipah onshore and that overall operations run smoothly.

Supervisor / Technician, Other, Engineer

Professional Profile Experienced Design/Drafting Piping/Process/Process Safety for Design Competition, FEED, Detail Drawing using Auto CAD/ MicroStation for Oil and Gas Onshore/Offshore and Petrochemical Project. Several times working for Prepare data material to input CQS system. Piping Quality Control, Piping Inspector, Piping test package/Punch List at fabrication and Field Construction Career Objective I am seeking a position which will allow me to apply and enhance my skills of being SP3D Designer Piping Process/Process Safety, Piping. But it does not rule out the position of the piping test package/punch list because I have that experience. In addition, I am eager to contribute my knowledge, experience and hard work towards the success of your company and to the growth of the fast-developing field.

Drafter / Designer, Inspector

Professional Process Design Engineer with excellent technical, analytical and communication skills combined with strong process engineering and multi-discipline base, demonstrated by over 6 years of extensive experience in pre-FEED / FEED / Detailed Design of Oil & Gas industry in plenty of state-scale projects.

Process Engineer with a background in chemical engineering, with over 12 years of extensive experience in the field of refinery, liquefied natural gas, gas processing, petrochemical, and chemical plants, having mixed roles ranging from technical engineering, project management, and operations.

*

Quality engineer certified by IRCA, I have 7 years of experience in the Quality, Audit and Training field in various sectors of activity, particularly in the automotive, aeronautics and agri-food industries. Performance is an indicator of a company's competitiveness. It allows it to improve its profitability, its growth and, above all, its position on the market. A good quality management system is one of the pillars of growth for the company. In this context, I offer you comprehensive support for all types of companies, starting with the right diagnosis and determining the most relevant standard, right up to certification by carrying out a blank audit. I also offer training in the field of Quality, Security and Environment (QSE) management, as well as in various standards, auditing techniques and optimisation of your management system. These training courses are adapted to all profiles and can be personalised according to your organisation and your needs: face-to-face, distance learning or e-learning. I am available to respond to your national and international calls for tender. Your satisfaction and that of your clients through our collaboration is one of my priorities. I am at your disposal!

Bachelor (Hons) of Chemical Engineering with a strong background in production management, process optimization, and safety protocols. Skilled in Distributed Control System (DCS), Management of Change (MOC), and training shift technicians. Recognized for leading successful projects and improving operational efficiency.

A chemical engineering graduate seeking a position where I can use my skills and experience to advance both my career and improve efficiency and productivity in chemical manufacturing operations.

Engineer

More than 15 years' experience in Gas Recycling plant with 800 MMSCFD feed. Main product stabilized condensate with raw NGL as side product

Supervisor / Technician