Construction freelance

More than 23 years accomplished in the O&G areas (Upstream & Downstream) as an Electrical/Instrument Engineering and Design, Elec/Inst/Tel Supervisor, Elec/Inst/Tel Field Engineer, Elec/Inst & Completion & Pre-comm/ Comm, Elec/Inst Project Engineer, Elec/Inst Commissioning Engineer, Senior Elect Commissioning Engineer, E-House Module Commissioning Lead and Project Management System in Worldwide Company Oil and Gas Industries. Well knowledge and familiar with the recent instrumentation (pneumatic, Hydraulic, Electronic, Wireless), Material & Construction Inspection, Continuity & Insulation Test, Calibrated field device (Pressure Switch, PSV, Flow/Level/Pressure Transmitter, Control Valve, auto choke, , ESDV/BDV, Gas Detector, Flame Detector, Heat Detector, Smoke Detector, etc), Well Head Control Panel, CCTV and Control, Access Card Control Loop test, Functional Logic Test & Integrated test and Operational Test. And familiar too with control system technology, such as DCS, SSS/SIS, PLC and SCADA (Allan Bradley, Yokogawa, Honeywell, Siemens, Modicon, Hima, Triconex, Rosemont/Honeywell Wireless system & Wonderware). Well Knowledge of electrical power system, fabrication, Installation and tested for 11KV distribution start from Power generator Diesel or Turbine generator, HV Transformer, LV Transformer, HV switchgear Panel, LV Transformer, LV 690/440 Switchgear/MCC, LV 230V Distribution Board, Electrical Control Monitoring System (EMCS)/PDCS), UPS/Battery, Electrical Heat Tracing, HVAC Distribution board, Telecom Distribution Board, Motor and Fan solo run test, Relay/ Load set point/ MCCB/MCB and Electrical Panel, LOTO, Load Test of power generation. Witness FAT,IFAT. SAT/ISAT Power system, Hydraulic System, Control System. And as a Lead Module pre-comm & Comm preparation engineering/Database/ Dossier, execution and supervised. Managed and worked on a diverse range of Elec/ Instr. engineering and design, construction, installation, pre-commissioning, commissioning and start-up, supply chain management, international code and standard implementation with all of it’s aspects to oil and gas facility, production and operation. Strong knowledge in electrical equipment related matters under API, NFPA, NEMA, IEEE, IEC, ASME, etc. Familiar and well knowledge of Prodom database, PULZ, Pre-comm & Comm Software such as Orbit, ICAPS, Q-Space and Easy Plant

Superintendent, Engineer, Supervisor / Technician

Experienced project professional with more than 25 years international experience in the industrial and energy sectors, herunder Industrial Drying & Evaporation, Floating Power, Offshore Oil & Gas and Offshore Maritime (FSO/FPSO/FSRU). International people management experience from managing cross-functional and multicultural teams globally across various regions. A strong background in General Management, Engineering, Project Management, Construction Management, Business Development and International Business. Broad practical experience of all phases of large and technical complex EPC CAPEX and OPEX projects with a good understanding of economic evaluation and technical analysis. Solid experience from Client and Contractor organizations with considerably site management experience from fabrication yards and shipyards. Strong stakeholder management skills and a proven ability to explain and implement complex technical matters to both internal and external partners. High personal commitment to HSE. Fellow of the Institute of Marine Engineering, Science and Technology – FIMarEST

Manager

My background spans full project lifecycle, from define, detailed design & execution, pre-commissioning, commissioning, hook-up & start-up. With over 25 years of international experience across major EPC construction projects, I offer the leadership, technical depth, and execution expertise needed to participate in the delivery of large-scale projects                                                                 Having safely led numerous Greenfield & Brownfield projects around Middle East, Europe and Asia I understand the integration and sequencing challenges of multi-discipline delivery. Throughout my career, I have built and led large multicultural teams, ensuring safety, schedule, and quality remain at the core of project execution. My leadership style combines disciplined planning, transparent communication, and a hands-on understanding of fabrication, installation, and commissioning methods. Key strengths I bring to this position include: Proven ability to safely lead large modular and stick built projects with complex interfaces. Balanced multidiscipline expertise with solid understanding of testing, and handover. Strong grasp of international standards governing Oil & Gas industry. Commitment to HSE excellence and continuous improvement through mentoring and leadership.

Manager, Superintendent, Engineer

Attention to; Dear Sir/Madam, Hiring Manager TREES ENGINEERING Good day Sir/Madam, let me introduce myself, MUHAMMAD RENNOL HAKIM, graduated from Mechanical Engineering the diploma degree of the Ship Design and Construction Engineering study program. I have working experience and knowledge more than 5 years as NDT Technician, Document Control, QA/QC Engineer and Welding Inspector in Oil and Gas, Fabrication, Construction, Shipbuilding and Manufacturing. I am supporting my Quality Assurance Manager with collects data for follow up Non-Conformance Report and I am learning to be a leader with team player characteristics manner. I have certifications such as CQI and IRCA Certified Lead Auditor QMS ISO 9001:2015, CSWIP 3.1 Welding Inspector, BNSP/MIGAS YAYASAN PENDIDIKAN IKBAL-M-YOS and ASNT Level II (MT/PT/UT) also attending to participated on others training awareness, as an inspector with minimum supervision I have ability to surveillance daily inspection activity as per related procedure. I am grateful for any feedback from your company, here I attached my Curriculum vitae for considering, I would like to thank you and I eager to join your amaze team and ready for my career step. I trust could work together and make a safe place with contribution to the company. Warmest Regards and Thank you, MUHAMMAD RENNOL HAKIM +62 813 7211 7501

Inspector, Engineer, Supervisor / Technician

I have 8 yrs of experience in onshore and offshore field.handling fabrication and yard erection activities.

Engineer

Experienced and results-driven Project Engineer with over 9 years of progressive expertise in oil & gas fabrication, offshore construction, and on-site execution across Singapore and Indonesia. Proven track record in leading multidisciplinary teams through high-value, complex projects, up to USD 22 million, from concept through to fabrication, testing, and commissioning. Strong ability to manage field operations, technical coordination, and project planning within demanding schedules and quality expectations. Skilled in executing onshore and offshore projects within the Oil & Gas, Marine, and Renewable Energy sectors, with hands-on experience in yard setup, subcontractor management, daily progress monitoring, and issue resolution. Technical strengths include subsea systems, structural and piping fabrication, and IRM (Inspection, Repair & Maintenance), backed by sound knowledge of international standards including API, ASME, and ISO. Technical Background: Bachelor’s degree in Electrical Engineering, offering a solid foundation in instrumentation, electrical systems, pressure testing, and FAT (Factory Acceptance Test) procedures. Able to bridge engineering designs with site execution, ensuring accurate translation of technical requirements into field deliverables. Project Expertise Includes: ·      Fabrication of subsea structures, pipeline spools, FPSO modules, tank separators, and offshore wind farm components ·      Leading FAT and pressure testing activities, ensuring compliance with client and international standards ·      Managing contracts, vendors, and subcontractors with a focus on delivery, cost control, and safety Leadership & Impact: Known for decisive leadership and high performance under pressure, consistently delivering safe, timely, and cost-effective results. Experienced in interfacing with international clients, EPC contractors, engineering consultants, and fabrication teams across multi-site and multicultural environments.

Engineer, Manager, Superintendent

Professional Electrical & Instrument Engineer with 16 years of experience in Electrical Engineering for upstream and downstream oil & gas projects, power plants, and Solar PV plants.

Engineer, Manager

Experienced Drafter specializing in Structural, Mechanical, and Electrical disciplines with proficiency in AutoCAD, Revit, and other CAD software. Skilled in producing accurate technical drawings and shop drawings, with strong knowledge of structural systems, mechanical (HVAC, plumbing, fire protection), and electrical (power, lighting, low voltage). Detail-oriented, well-organized, and capable of working across disciplines to support the successful execution of construction and industrial projects and follow regulation Health Safety Environment.

Drafter / Designer

I’m an experienced Sourcing & Procurement with 7 years in engineering and construction, specializing in MRO and EPCC projects. I'm very strong in supplier negotiation, cost optimization, and relationship management, with a focus on delivering efficient procurement processes that drive project success. With my experience, I'm confident that I am ready to take on more responsibility in procurement planning, cost saving and supplier management at a higher level.

Other

Results-driven individual with over 20+ years’ experience in Automation and Instrumentation systems. A Certified Project Management Professional (PMP), holding an MBA degree, well-organized individual with proven results in project management, commissioning of four new factories in Egypt and Saudi Arabia, cost control, process improvement, operations management, team leadership and safety.

Engineer, Superintendent

Originally from Rio de Janeiro with Italian nationality, over the last 20 years I grew through increasingly complex roles in Oil and Gas ecosystem. I have a demonstrable track record leading complex Tier-1 projects with different commercial models’ type of contract FEED, EPC, EPCM and EPCI, most likely Drilling, Subsea, Topside Construction, FPSO, Decommissioning and Vessel Operations take end-to-end ownership of operations drive seamless integration and execution. Those years taught me the strategic direction, commercial performance, and operational oversight of the regional business unit. The remit spans asset performance, investment strategy, project delivery, and sustainable growth across the offshore oil & gas value chain.

Experience in oil and gas business for 18 years in both operations and projects team with PETRONAS. Leading as Hook-up & Commissioning Manager for construction and commissioning works for various offshore Gas and Oil projects brownfield and greenfield.

Manager, Engineer, Other

I’m looking for a challenging position, one that offers scope for development and can be rewarding. My communication skills are excellent and I have a proven ability to deal with people at all levels and nationalities. I feel my team player and leadership attributes, experience, and communication skills can be utilized in obtaining personal career goals and those of the employer.

Engineer, Supervisor / Technician, Superintendent