Pipeline freelance

I have more than 10 years of experience in oil & gas projects for onshore and offshore. Most of my positions are as a project engineer where I assist project managers and coordinate all departments.

Superintendent, Manager

Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

Seeking a career in an organization that provides me an excellent opportunity for my entrepreneurial and productive thinking in the most demanding in QA/QC Piping, Welding, Static Equipment, Pipeline, Structure, Valve and Flange Management Inspection Professionals. I am willing to work in a progressive and challenging environment, which provides me opportunities for enhancing my knowledge and using my creative, technical and professional skills towards the fulfillment of the goal of the organization I am working for.

Engineer, Inspector

Highly motivated and detail-oriented piping/pipeline engineer with 13 years of onshore/offshore experience  in all aspects of design and stress analysis in Oil & gas, power, petrochemical and water treatment sector  for greenfield/brownfield project. Extensive experience in fiberglass piping engineering. Possesses sound knowledge of piping/pipeline engineering, system design & analysis. Effective  communication, problem solving and interpersonal skills.

Engineer, Manager

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

Multi-skilled project management professional with more than 22 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Passionate and disciplined engineer with a degree in mechanical engineering with involvement in mechanical field role(s) incl. engineering design, inspection, and asset integrity.

Engineer, Inspector, Other

As a Senior Multidiscipline Inspector with more than 18 years of experience in Oil & Gas EPC, offshore, fabrication, pipeline, and brownfield projects, I bring strong technical expertise, professionalism, and reliability to every assignment. My experience covers welding, piping, structural, pipeline, coating/painting inspection, mechanical completion, and pre-commissioning activities across major international energy projects and multicultural working environments. I am committed to delivering accurate, detail-oriented, and dependable work in compliance with international standards, client specifications, and project quality requirements. Clients can expect clear communication, disciplined execution, strong problem-solving capability, and a consistent commitment to quality, safety, integrity, and professional support throughout every stage of the project.

Inspector, Engineer, Other, Supervisor / Technician

> 20 years experience in ofshore, subsea & pipeline including deep water experience in oil & gas across Concept, FEED, Detail Design and EPCI. Familiar with various codes and standards such as ASME, API, DNV and ISO. Experienced in Subsea, Umbilical, Riser, Flowline (SURF) expertise, subsea field development involving various subsea production, control, distribution system, umbilicals, risers and flowlines.

Engineer, Manager

I am a Construction & Project Engineer with 18 years of extensive experience in the oil and gas industry. Throughout my career, I have successfully managed multidisciplinary scopes, enhanced my technical expertise, and delivered results across complex projects.  My ability to lead, solve critical site issues, and ensure project success aligns with the demands of overseas assignments. My strength lies in both greenfield and brownfield construction projects within the oil and gas sector. I have extensive experience leading and managing rejuvenation, revamp initiatives, new plant construction, and modular extensions integrated into live operational plants. Additionally, I have been actively involved in shutdowns and turnarounds. In addition to leading construction projects, I have been actively involved in the initial phases of project technical development. This includes overseeing design, procurement, and logistics to ensure a seamless transition from planning to execution. Throughout my career, I have worked on various projects at Petronas facilities, including MLNG, ASEAN Bintulu Fertilizer, Bintulu Integrated Facilities, Miri Crude Oil Terminal, and Bintulu Additional Gas Facilities. During the execution stages of these projects, I have successfully led multidisciplinary teams, taking on roles such as Work Test Package Leader, Pre-commissioning and Commissioning Lead, and RFSU (Ready for Start-Up) Leader. My responsibilities also included managing critical interfaces for tie-ins with existing plants and ensuring compliance with regulatory authorities and standards. This diverse experience underscores my ability to manage complex projects and ensure seamless integration of new developments within existing operational environments. * Feed engineering, ITB management, tender planning, material take off, schedule, budgeting, HSE (Cimah, Hira, Hazop, Simop, etc), quality management, develop ITP, Inspection for piping, has valid cswip 3.1,

Engineer, Superintendent, Manager

I have more than 15 years experience of Welding Inspection with reputable Clients including Dolphin Energy, Qatar Petroleum, Aramco, SWCC & Shipyard. Where I get professional experience. I have Bachelor degree in Metallurgy and Material Science & Welding technology and have RMP-PMI, Cswip 3.1. as well as NDT (RT, UT, PT ,MT) level II. I have also experience as a Third Party Welding Inspection in which all the Welding Technique is used with different clients including Manual, Automatic or Semi Automatic welding machines. After completion of Welding NDT( VT,RT,UT,PT,MT) is witnessed then Destructive testing (Tensile Test, Bend Test, Hardness Test, Chemical and Failure) is also include in our scope in Element Material Technology KSA. I have also experience as a consultant in which we review all procedures for Welding, NDT & DT, Hydro test till the dossier and commissioning.

Engineer

Senior Maintenance Supervisor with 19+ years of experience in EPC, PMC, and owner-side projects across LNG, oil & gas production, pipelines, and industrial processing facilities. Proven expertise in Mechanical, Electrical, and Instrumentation (MEI) maintenance, midstream asset management, and cross-phase project execution from Project initiation through Commissioning to Operations. Skilled in Operations Readiness Plan (ORP) preparation, preventive/predictive/corrective maintenance, maintenance procedure development, RCA facilitation, CMMS/SAP PM execution, and reliability KPI improvement (MTBF, MTTR, downtime reduction). Demonstrated ability to build competent operational teams, coach personnel for government-mandated certifications, enforce HSE compliance (PTW, LOTO, SIMOPS), and deliver safe, reliable, and cost-efficient gas & condensate operations.

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

Able to take any challenges, able to work in various culture and environmental, self-motivated person, able to make a rational decision with limit of authority, hardworking, responsible and supportive to team member.

Drafter / Designer

Mechanical Engineering background, Welding Inspector, inspection I Have more than 15 years’ experience in OIL & GAS Inspection, Power Plant and Quality Control including supervision & coordination, prepare quality control procedure and responsible for general quality control activities to confirm that they comply with specified procedure or client requirement. Preparing and reviewing Quality Control Plan, Inspection & Test Plan, Welding, Nondestructive/Destructive Testing, Vendor Expediting/Inspection, and Material Inspection. Also experience in Piping inspection for site and fabrication, Structural inspection, Storage tank inspection, Mechanical Rotating/Static inspection, Civil inspection.

Inspector, Superintendent, Supervisor / Technician, Engineer

independent

Inspector

* QC Inspector (Structural, Mechanical & Piping) for Gas Turbine Compressor Package; Medco E&P Natuna; FPSO Marlin Natuna Forel Baronang Project * Chief QAQC for Oil Pipeline Replacement size 4" to 28", 350 Km Minas Duri Dumai; PGN Solution: Chevron (PERTAMINA) Rokan Project * Welding Inspector for installation 10" pipeline 1 Km ORF Petronas to SAKA ORF; PGN Solution; Bukit Tua Project * QC Engineer for Installation 42" pipeline 15,6 Km, Kp26,5 to ORF ENI; Agia Pertiwi; Lean Gas Project * Project Manager for Certification for Offshore Platform Subsidence Project; DNVGL; Yadana Project (Myanmar) * Residence Inspector for Certification for Offshore Platform Living Quarter & Flare; DNVGL; Great Bongkot South Project (Thailand) * Residence Inspector for Inatallation 28' & 32" of Pipeline 450 Km; GL Nusantara; South Sumatera West Java Project

Engineer, Inspector, Supervisor / Technician

Experienced Company Reps/Engineer/Supervisor/Inspector/Auditor (QA&QC/Welding/Subsea Structure/Coating/Structure/Piping & NDT)

Inspector, Supervisor / Technician, Engineer, Superintendent

Having experience more than 10 (Ten) years in Inspection & Quality Control including supervision & coordination, inspection and responsible for general quality control activities to confirm that they comply with specified procedure or Client requirement. Having experiences of job covering in QA / QC as Welding Inspector , NDT Inspector are in fabrication , erection and installation of piping fabrication installation of various material ( CS, SS, Duplex , FRP , PVC ) , pipeline fabrication installation both onshore & Offshore

Inspector, Engineer

I am an experienced construction and engineering professional with over 22 years of hands-on experience in the oil and gas, LNG, petrochemical and renewable fuels sectors. Throughout my career, I have developed strong practical knowledge in construction execution, engineering coordination and delivery of complex industrial projects, with a focus on safety, quality and schedule control. My professional background includes working in various roles such as Project Management Team, Construction Management Team, Site Team Lead, Construction Site Supervisor, Field Engineer, Coordinator and Inspector. These roles have provided me with broad exposure to site operations and have strengthened my capabilities in project coordination, engineering support, stakeholder communication and regulatory compliance. I have worked across the full project lifecycle under subcontractors, main contractors, project management consultants (PMC) and client-side organizations. This experience has given me a clear understanding of different project delivery approaches and allowed me to coordinate effectively between clients, consultants, contractors and site teams to ensure smooth execution. My project experience includes large-scale developments such as pipe racks, pipelines, petrochemical plants, steam cracker complexes, refineries, LNG processing complex, processing units, modular fabrication, yards and offshore installation works. I have been responsible for construction planning, site execution, progress monitoring, quality control and coordination of multidisciplinary activities to ensure projects are completed safely, on time, within budget and in compliance with specifications. I have strong experience in engineering and design support, particularly in resolving site design discrepancies, managing technical clarifications and providing practical engineering solutions to construction teams. I regularly engage with senior management, clients, consultants and regulatory authorities to obtain approvals, maintain compliance and support project requirements. Health, Safety and Environment management has been a core focus of my career. I consistently promote a strong safety culture on site and ensure construction activities comply with established HSE standards and procedures. I am also experienced in supervising and inspecting structural, piping, mechanical and civil works, including preparation and verification of hydrotest packages, welding inspection activities and coordination of Non-Destructive Testing processes. My experiences include major yard fabrication of offshore decks and modules exceeding 13,000 metric tonnes, using modular construction and pancake stacking methods. I have more than 10 years of leadership experience in structural fabrication for offshore topside platforms and LNG modules. I remain highly motivated to apply my experience, technical knowledge and leadership skills to challenging construction and engineering projects in the energy and industrial sectors.

Superintendent, Supervisor / Technician, Manager, Engineer

Transportation & Installation Manager / Project Manager

Engineer, Manager

Chartered Mechanical Engineer (CEng MIMechE, UK) — 20 Years | Subsea • Mechanical Design • FEA • Robotics • Biomechanics Senior mechanical engineer with two decades delivering high-complexity projects across oil & gas, subsea, drilling, pipeline installation, robotics, and advanced mechanical systems. I solve problems that demand senior technical judgment, deep design experience, and disciplined execution — not just software output. Leadership Track Record Engineering Manager • Project Manager • Head of Mechanical Engineering Department • Engineering Interface Coordinator — on multidisciplinary projects with critical technical interfaces and high-stakes engineering decisions. Core Mechanical Engineering Mechanical design, finite element analysis, induced vibration analysis, mechanics of materials, material selection, valves, drilling equipment, hydraulic and electro-hydraulic systems, and static equipment. 3D modeling, workshop and forging drawings, assemblies, fabrication support, and fully buildable manufacturing deliverables. Subsea & Pipeline Engineering SPS systems, subsea manifolds, umbilicals, flexible jumpers, landing string interfaces, pipeline installation equipment, stinger handling systems, stinger angle-adjustment cranes, and roller box design. Proven in managing interfaces between drilling teams, installation contractors, SPS contractors, pipeline contractors, and specialist equipment suppliers. Static & Process Equipment Pressure vessels, API 650 storage tanks, shell-and-tube heat exchangers, HTRI thermal design, Aspen HYSYS/EDR, flow assurance, and hydraulic simulations. Full lifecycle delivery: FEED, detailed engineering, as-built, mechanical completion, pre-commissioning, commissioning, cost estimation, planning, and scheduling. Beyond Oil & Gas Biomechanics and assistive equipment design for users with motor-skill limitations. Robotics and automation, backed by a Master’s degree focused on autonomous mobile robots and nonlinear control. Software ANSYS • SolidWorks • PTC Creo • AutoCAD • HTRI • MATLAB • Simulink I bring more than software capability — I bring senior engineering judgment, multidisciplinary experience, and the ability to convert difficult technical challenges into reliable, manufacturable, and practical engineering solutions.

Engineer, Manager

Hello TREES Engineering team, My name is Mohd Faiz bin Zainal. Briefly, I am a Mechanical Engineering graduate from University Technology PETRONAS and have been working for 10 years in the oil and gas industry. I am currently based in Kuala Lumpur, Malaysia working as an Operations Engineer under Carigali Hess Operating Company. My career experience covers project/operations management for overall upstream and downstream operations. By saying that, I have no issue to go out of my comfort zone and venture myself in a different and new working environment.

Engineer