Installation freelance

•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc… 

Manager, Superintendent

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.

Engineer

With over 31 years of extensive experience in the Oil and Gas industry, this professional has led technical and leadership roles with renowned companies such as Esso Production, Imperial Oil, Petronas, Murphy, Talisman, and integrated services firms. Expertise spans national, regional, and international levels. Demonstrated proficiency in project management, construction execution, and contract management, including EPC, EPCI, EPCC, and oversight of Yard and onshore Construction Site activities. Successfully navigated comprehensive project phases from the bid stage, design, fabrication, onshore/sea transportation, on-site installation, hook-up, commissioning, to eventual handover. Instrumental roles have been played in diverse projects, including sophisticated offshore fixed production and compression platforms, cutting-edge floating production facilities, and live onshore plant modifications. Projects were located in various countries such as Malaysia, Singapore, Indonesia, the United Arab Emirates, Qatar, Germany, Kazakhstan, and Canada. Also a motivated Specialist Consultant with expertise in tender strategy, value engineering, and diligence consulting. Proficient in exploration, engineering, construction, and renewable energy, committed to achieving successful project outcomes.

Manager

He has over 23 years of industrial experience working in energy and utilities industry performing inspection, assessment and providing specialist advice/solution, leadership and mentoring in quality, with over 17 years in the capacity of supervisor up to acting Company Site Representative (CSR). He is a Welding/NDT Inspector by training, however for the most part of his career as a quality personnel, most of the time he dealt with multi disciplinary missions. His high proficiency in welding QC therefore, is strongly backed by demonstrated competencies and knowledge in other associated disciplines i.e. structural, piping, mechanical packages equipment (static and common rotating equipment), Mechanical Joints Integrity, protective coatings and vibration basics. He is also stands in as a Construction Supervisor when required, with significant contribution to the field works progress. Consistently upgrading his career where from year 2008 onwards he continued as a quality team member represented esteemed end users and EPCC such as PETRONAS, Woodside Energy, Eni, Shell, Saipem and Foster Wheeler etc. In year 2012 he was heavily involved in subsea projects performed vendor surveillance for the manufacturing of drilling and wells completion equipment such as wellheads, Christmas trees (XT) including its associated equipment and tools, Subsea Control Modules (SCM), production manifolds and pipelines (WPQT/WQT and multi joints fabrication). Extensive hands on experiences in multiple disciplines and project cycles has made him versatile, adaptable to the fast track project environment, able to anticipate problems and further provide solutions in wider perspective besides make timely decisions in daily activities relevant to the specific project. He had attained distinguished track records in delivering Quality Management System (QMS) programs through his commitment towards “Do It Right First Time” and continuous improvement in numerous major projects related to hydrocarbon processing equipment and facilities ranging from greenfield development to brownfield modification (including plants reconstruction, rejuvenation, revamp and turnaround).

Inspector, Supervisor / Technician

Dynamic and accomplished chemical engineer with a wealth of industry experience, adept at navigating complex  challenges with poise and strategic logic. Proven track record in orchestrating multiple competing tasks to ensure  seamless project execution from conceptualization to completion. A progressive, technically-savvy leader with a  keen analytical mindset, dedicated to driving continuous process and procedural improvements that enhance  outcomes and align with organizational strategic goals.   Expert in cost and budget control, consistently delivering projects within financial constraints while maximizing  efficiency and value. Known for a collaborative approach to building and managing business relationships, adept at  resolving issues, translating complex information clearly, and fostering strong rapport across all levels, both  internally and externally, in traditional and remote distributed environments. 

Engineer, Manager, Translator

Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

I have more than 9 years experience on Marine Consultant, Shipyard, Oil & Gas and Power Plant industry in engineering modeling design, fabrication, budgeting/cost control, and project management scope.

Engineer, Superintendent, Manager

Experienced Process Engineer with an extensive background in engineering principles, project leadership, and the management of safety procedures. Bringing forth leadership, dedication, and over two years of experience working with engineers and project managers at multiple levels. Strategic thinker with the ability to improve efficiencies by assessing and enhancing company processes. Proven track record of solving high level engineering problems, and working collaboratively with other engineers to leverage solutions. Aggressive to learn to increase my analytical skills and industrial experience to achieve my goal to become a qualified chartered engineer. High enthusiasm, team player, risk-taker, positive-minded and willing to travel/ relocate in order to enhance my engineering competencies.

Engineer

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

A strong leader with 15+ years of offshore methods installation engineering and operations experience with excellent communication skills and a commitment to teamwork. Bachelor's degree in engineering (naval architecture) with over 15+ years of experience of engineering for major EPCI contractors and operators s in oil & gas installation industry. From offshore field engineer to offshore methods installation (and operations) engineer (senior and lead positions). Member of PMT on various projects through Europe, Middle East and Far East.

Engineer, Manager

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

Hi Im Aiman .For your information,this year I am 29 years old. I graduated from University Technology Malaysia with a Bachelor Degree in Naval Architecture and Offshore Engineering.Currently , I am Project Application Engineer in Lutz Jesco East Asia Sdn Bhd since 2019 which has mostly been involved in Water Treatment Plant and chemical plants . Before this , I have been working in the oil and gas industry for 2 years as a project engineer at Petrico Engineering Sdn Bhd (2017-2019) of which which have successfully managed various projects throughout these years. I am aware that the company has been engaged in some exciting projects and initiatives in the industry in recent years. As you can see, I have been involved in similar work and I could greatly contribute to your company’s goals in the future. I am highly passionate to work in this industry. In addition, I also have high competencies in AutoCad, Solidwork,PV-elite and Maxsurf which will be an added value to your organisation.  Attached herewith is my CV and certificate for your kind reference .I really look forward to meeting with you and discussing my qualification in more detail Thanks

Engineer

HSSE Manager | HSE Engineer | HSE Specialist | HSE Training Coordinator Bach, Degree in Industrial Engineering. An HSE visionary & leader, having 20+ years of rich experience in providing management, leadership and technical oversight for Health, Safety, and Environmental initiatives for multi-million USD Construction/Projects, Plant Operations/Facilities Operation, Security, Production Facilities and Power Plants. Enabling organizations to become their best through HSE process optimization and improvement. Drove project safety excellence as well as optimization and execution methodologies.

Manager, Superintendent, Engineer

I am a person having experienced in construction management, mechanical, piping, fabrication professional working with large construction teams with a career spanning over fifteen years in the energy sector, power plant, refinery, and mining. Proven track record in leading large contractor teams and delivering on billion dollar complex construction projects from conception right through to commissioning and operational handover. Hands on, Fast action, Persistence,Resilience and Agile in handling many cases for achieving company’s goal.

Engineer, Superintendent, Manager

 I trust this message finds you in good spirits. I am writing to express my genuine interest in the Project/Construction Engineer/Material Coordinator position and other relevant roles within your esteemed organization. My enthusiasm for the role is matched by a willingness to relocate or work internationally, driven by a desire to immerse myself in diverse work cultures and expand my professional horizons. My career path includes a substantial foundation in project management, asset coordination, and material management specifically within the oil and gas sector. Here's a concise overview of my pertinent experiences: Professional Highlights: Piping Construction Engineer (MMHE/Sapura Energy/MIE Industrial): Projects: 1.  EPCIC of CPP KASAWARI Gas Development Project, Petronas Carigali 2.  EPCIC of Integrated Central Processing Platform (ICPP) PEGAGA, Mubadala Petroleum 3. EPCC of B7IN INTEL Falcon Project, K005 Mechanical & Piping Works ·   Managed EPCIC projects for gas development, ensuring adherence to stringent standards across the project lifecycle. ·  Supervised piping installation, hydrotesting, and reinstatement activities, optimizing material delivery schedules for improved project efficiency. Material Management Engineer (Sapura Energy): ·  Effectively governed material databases, efficiently tracked deliveries, and ensured timely supplies by fostering collaboration between warehouse and quality departments. ·  Strategically coordinated material movements, expediting inspections and meticulously maintaining comprehensive reports for streamlined management review. SAP Material Cataloguer (Mecip Global Engineering): ·  Spearheaded the cataloging of equipment parts and managed BOM entries in the SAP system for pivotal plant modification projects, guaranteeing precise data alignment. Education & Proficiencies: Bachelor of Science (Hons.) in Industrial Mathematics: Actively participated in extracurricular activities, demonstrating strong leadership qualities. Language Proficiency: Proficient in spoken, written, and listening skills in both English and Malay. Compliance and Skills: Possesses industry certifications, excels in site engineering, project management, material coordination, piping construction, safety compliance, and proficient database management. I am enthusiastic about the opportunity to discuss how my diverse skill set and experience could bring value to your team. Continuous learning and personal development are values I hold dear and am eager to apply in a new role. For your convenience, I have attached my application package and remain available for any queries at +601-11026 2405 or via email (hadiomaq@gmail.com). Thank you for considering my application. I am eagerly looking forward to the possibility of contributing to your team's success.

Engineer, Supervisor / Technician

Seasoned HSE professional with several years of experience in the oil and gas industry. Skilled in implementing and auditing ISO management systems, ensuring compliance and operational excellence. Extensive experience across multiple disciplines, including T&I campaigns, marine operations, subsea projects, inspections, and NDT. Proven track record of working with various operator OPUs, driving safety and efficiency in high-risk environments.

Other

Committed and professional electrical, instrumentation and automation engineer familiar with standard electrical, instrumentation and automation requirements. More than twenty years experiences in proposal/tender, engineering design, procurement and project execution of electrical, instrumentation, automation control system and its construction for oil and gas, manufacturing and petrochemical industry. Strong management and leadership abilities for delegating tasks or providing instruction clearly and accurately. Prioritize, organize work and meet deadline. Strong communication skills, ability to work independently with best in team, self-motivated and ability to manage changing priorities.

Engineer, Manager

Seasoned Mechanical Engineer with 20+ years of experience in Oil & Gas, Offshore Construction, and Mechanical Static Engineering. Proven track record in executing offshore rejuvenation projects, managing multi-disciplinary teams, and ensuring compliance with safety and quality standards. Adept at project lifecycle management, technical troubleshooting, and delivering engineering solutions under high-pressure environments.

Engineer, Superintendent, Supervisor / Technician, Manager

Result-driven Mechanical Rotating Engineer with over 13 years of progressive experience in rotating equipment, project management and maintenance within oil & gas and petrochemical industry. Expertise in overseeing rotating & turbomachinery equipment FAT, installation, pre-commissioning, commissioning, maintenance, overhaul, refurbishment, Plant shutdown and Turnaround ensuring compliance with API, ASME, ISO and Petronas Technical Standard. Proven track record in delivering technical solutions and managing cross-functional teams for clients such as Petronas and TNB Genco.

Engineer

1. Inspection/witness Factory Acceptance Test (FAT,iFAT,OTFAT) 2. Inspection/witness any E&I stage eg. Fabrication, installation, inspection, pre-commissioning and hook-up 3. Monitor and supervised workers workmanship 4. plan, coordinate and execute any job related to construction work.

Inspector, Engineer, Supervisor / Technician

I am Fairol Hasbullah, a dedicated and skilled Structural and Project Engineer with over 10 years of hands-on experience in metal fabrication, structural steel, and piping construction, particularly within the oil & gas and heavy industrial sectors. My technical foundation is backed by a Diploma in Engineering Technology (Metal Fabrication) and certifications in Tool & Die Mechanical Engineering. Throughout my career, I have contributed to various high-profile EPC and EPCC projects involving pressure vessels, skid structures, subsea pipeline field joint coating, offshore riser clamps, passive fire protection, and large-scale grouting/flooding systems. I bring strong expertise in Autocad 2D/3D design (including isometric, P&ID, and BOM), CNC programming, project costing, fabrication procedures, and lifting/loadout operations. I am highly adaptable, detail-oriented, and well-versed in coordinating with multidisciplinary teams to meet project timelines and client specifications. With a deep understanding of fabrication processes and safety standards, I aim to deliver high-quality, cost-effective engineering solutions on every project.

Engineer

* An experienced engineer with a strong interest in projects that require both conceptual and analytical thinking * Fully committed to exploring new challenges in unfamiliar environments * Always eager to learn new skills and techniques from anyone, regardless of their industry * Open-minded and adaptable, with a passion for continuous growth and improvement

Engineer

My name is Saqib Ali, and I hold a degree in Mechanical Engineering with 05 years of valuable professional experience. During my career, I had the privilege of contributing to significant projects, including the greenfield project at Nishat Sutas Dairy and a brownfield project at COCA-COLA Beverages PAKISTAN(CCI). In these roles, I played a pivotal role in managing utility and process piping projects, overseeing the installation of Piping, valves, Pumps, and Plate Heat Exchangers (PHEs). My expertise extends to creating comprehensive 2D and 3D drawings, Hydrotesting of piping, piping, enabling precise project execution as per engineering specifications. I have excellent skills of Solidworks and AutoCAD and good knowledge of International standard (ASME,ISO,ASTM,API ). I am enthusiastic about exploring new opportunities where I can leverage my skills and experience to make meaningful contributions.

Engineer