Offres d'emploi publiques

Job Responsibilities:

• Responsible for delivering instrument & Control design work efficiently and in a timely manner during proposal and project delivery stage.

• Preparation of instrument datasheet, instrument list and I/O list.

• Preparation of instrument sizing for flow element and valves.

• Familiar with SIL methodology and implementation.

• Preparation of control system design deliverables for DCS, ESD, mechanical package control system PLC and relay base system.

• Preparation of loop drawings and interlock logic diagram.

• Preparation of System Architecture, System block diagram, control narrative, etc. for control system.

Job Requirements:-

• Candidates must possess at least a Degree in Instrumentation or Chemical Engineering background.

• 7 -10 years’ experience with at least 5 years of engineering design experience in control system design in Oil & Gas and Petrochemical industries.

• Familiar with international codes and standard (especially IEC, ISA, etc.)

• Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.

• Experienced in SIL study and SIL verification work.

• Able to use SPI software.

• Good command in Malay and English (spoken and written)

• Able to work independently with minimum guidance

• Able to work in team and possess excellent interpersonal and communication skills.

• Registered with BEM (Board of Engineers Malaysia).

Job Overview:

We are seeking a highly skilled and motivated Fluid Engineer to support our upcoming drilling campaigns. The successful candidate will be responsible for designing, planning, and executing drilling fluid programs that ensure well integrity, safety, and cost-efficiency. This is a short-term contract role with strong potential for extension depending on operational requirements and performance.

Key Responsibilities:

• Develop and optimize drilling fluid programs tailored to specific well and formation conditions.
• Monitor and manage drilling fluid properties and performance during operations.
• Coordinate with the drilling and subsurface teams to align fluid systems with well objectives.
• Supervise and support mud engineers and contractors at the rig site.
• Ensure fluid systems comply with HSE standards and local regulatory requirements.
• Troubleshoot fluid-related issues during drilling operations and propose timely solutions.
• Prepare end-of-well reports and maintain accurate records of fluid performance and usage.
• Liaise with vendors and third parties for fluid materials, tools, and services.

Requirements:

• Bachelor’s Degree in Petroleum Engineering, Chemical Engineering, or a related discipline.
• Minimum 5 years of experience in drilling fluid engineering in the oil & gas industry.
• Proven track record of managing fluid systems in offshore and/or onshore drilling environments.
• Strong knowledge of water-based and oil-based mud systems.
• Excellent problem-solving skills and the ability to make quick decisions under pressure.
• Familiarity with HSE regulations and standards related to fluid handling and disposal.
• Good communication and reporting skills.
• Available for immediate mobilization.

Key Responsibilities:

• Lead and manage the structural engineering team for FPSO projects across all project phases (concept, FEED, detailed design, construction, and commissioning).
• Develop and review structural analysis, calculations, and design reports to ensure accuracy and compliance with standards (API, ABS, DNV, ISO, etc.).
• Provide technical expertise on FPSO topsides, hull structures, modules, and mooring systems.
• Coordinate with other disciplines (Mechanical, Piping, Process, Electrical, Marine, Safety) to ensure integrated design solutions.
• Review and approve structural drawings, 3D models, fabrication packages, and material specifications.
• Manage structural engineering deliverables to meet project schedules and budgets.
• Participate in design reviews, risk assessments, HAZIDs, HAZOPs, and constructability reviews.
• Support procurement activities by reviewing technical specifications, vendor documents, and construction submittals.
• Provide technical support during construction, offshore installation, and commissioning phases.
• Ensure compliance with client specifications, project standards, and regulatory requirements.
• Mentor and develop junior engineers within the team.

Experience Requirements:

• Minimum 10 years of structural engineering experience in the Oil & Gas industry.
• Minimum 5 years of direct FPSO project experience (new build or conversion).
• Strong background in structural analysis software such as SACS, STAAD.Pro, SESAM, or equivalent.
• Familiar with international codes and standards (API, DNV, ABS, ISO, AISC, etc.).
• Experience in both greenfield (new construction) and brownfield (modification/upgrade) projects is highly desirable.
• Strong knowledge of fabrication, offshore installation, and load-out/transportation methodologies.
• Previous experience leading a team of structural engineers on major offshore project

Job Responsibilities

• Monitor and enforce site safety procedures in compliance with Malaysian regulations and client standards
• Conduct daily site inspections and toolbox talks
• Identify hazards, assess risks, and implement corrective measures
• Ensure all workers comply with PPE and safety protocols
• Report and investigate incidents, near misses, and unsafe acts
• Maintain accurate safety documentation and reports
• Liaise with site engineers, contractors, and client representatives on HSE matters
• Support and facilitate safety drills, trainings, and audits
• Promote a proactive safety culture across all site activities

Job Requirements

• Minimum 2–3 years of site safety supervision experience
• Valid Yellow Book holder (registered SHO with DOSH Malaysia)
• Strong knowledge of Malaysian OSH regulations and construction safety practices
• Experience in geotechnical or infrastructure construction projects preferred
• Good communication and coordination skills
• Able to work full-time on-site in Pengerang for the contract duration

Scope

• To be part of Process Engineering team in providing process engineering support to Floating Carbon Storage and Injection Unit (FCSIU) facilities Project which will be in Pre-FEED stage.
• The Process Engineer is expected to support in developing Process Engineering deliverables such as process calculations, process datasheets, HMB generation, process drawings (PFD, P&IDs), Line List, assisting Senior/Lead Engineer on other process deliverables as when time require.
• To manage and be accountable for task given, as delegated by the Lead Engineer of the project.
• Ensuring produced deliverables is of good quality by adhering to Project’s requirements, Process Department Procedure and other relevant procedures.

Qualification

• Degree in Chemical Engineering.
• Registered with BEM.
• Minimum 3 years’ experience in oil and gas production and processing design. Experience in CCS or the Cryogenic service project is an advantage.

Competency

• Able to utilize process simulation software such as ASPEN HYSYS.
• Able and has the experience to perform standard process engineering deliverables mentioned in Scope.
• Having experience in designing CCS facility, cryogenic system and/or liquid and vapour CO2 related system is preferred.
• Possess knowledge of Classification, Engineering Codes & Standards for Oil & Gas Industry, e.g. ASME, API, ASTM, etc.
• Demonstrate good leadership & communication skills.
• Computer Literacy in using Words, Excel, PowerPoint, AutoCAD is preferred.
• Able to work independently, self-motivated with a positive working attitude.
• Demonstrate initiative, proactive, flexibility and adaptability.
• Good problem-solving skills & effective inter-disciplinary co-ordinations.

Key Responsibilities

• Monitor site operations to ensure compliance with health and safety legislation.

• Conduct safety audits, inspections, and incident investigations.

• Deliver toolbox talks and safety inductions.

• Assist in developing safety policies and risk assessments.

• Work closely with project teams to implement and maintain HSE protocols.

Key Requirements

• 2–3 years of proven experience in construction or civil projects.

• Green Book holder – mandatory.

• Familiarity with Malaysian OSH standards and safety regulations.

• Strong communication and reporting skills.

• Able to work independently and proactively in a site-based environment.

🧰 Tong Operator – HWU Plug & Abandonment / Workover

📍 Offshore Terengganu (Seligi Block)

📅 Start: Immediate | ⏳ 6-Month Contract

🔧 Contract Type: Freelance | RPT-Only (Locals or Expats)

We are seeking a skilled Tong Operator to join a fast-paced Plug & Abandonment (P&A) and Workover campaign offshore Terengganu with end client T7. This role is critical to ensuring safe and efficient tubular handling during Hydraulic Workover Unit (HWU) operations.

🔍 Role Responsibilities:

• Operate power tongs and associated equipment during tubing and casing make-up/break-out operations on HWU.
• Ensure safe and proper handling of tubulars in accordance with operational and HSE procedures.
• Inspect, maintain, and troubleshoot tong equipment and ensure readiness before each job.
• Work closely with the rig crew and supervisors to coordinate handling operations efficiently.
• Participate in daily safety meetings, toolbox talks, and actively support the company’s HSE initiatives.
• Maintain accurate records of make-up/break-out operations and equipment maintenance.

✅ Candidate Requirements:

• Minimum 5 years total experience in the oil and gas industry, with at least 2 years as a Tong Operator.
• Certification: Valid IWCF Level 3 (Well Intervention or Drilling) or IADC equivalent.
• HWU Familiarity Requirement:
• Either: Worked on the same HWU for 6 months within the past 12 months
• OR: 3 years experience with the same HWU equipment (e.g., tongs, handling tools, pipe spinner).
• Proven experience in HWU operations, particularly for P&A or workover campaigns.
• Valid BOSIET and offshore medical certificates are mandatory.
• Strong mechanical skills, safety awareness, and teamwork mindset.
• Must be ready for immediate mobilisation.

🌍 Project Info:

• Location: Offshore Seligi Block, Terengganu / Peninsular Malaysia
• Project Type: Plug & Abandonment / Workover (HWU)
• Duration: 6 months with potential extension
• Eligibility: Open to Malaysian nationals or expats with valid RPT status only

🧰 Winch Operator – HWU Plug & Abandonment / Workover

📍 Offshore Terengganu (Seligi Block)

📅 Start: Immediate | ⏳ 6-Month Contract

🔧 Contract Type: Freelance | RPT-Only (Locals or Expats)

We are looking for an experienced Winch Operator to support a critical Plug & Abandonment (P&A) and Workover campaign offshore Terengganu for our end client, T7. The role requires strong hands-on experience with Hydraulic Workover Units (HWU), particularly in winch operations during high-priority well intervention phases.

🔍 Role Responsibilities:

• Operate winch systems during HWU rig-up, rig-down, and live well interventions.
• Safely handle lifting and lowering of tools, BOPs, and tubulars in line with operational procedures.
• Coordinate with supervisors, toolpushers, and rig crew to ensure safe lifting operations.
• Perform equipment checks, routine maintenance, and ensure winch readiness at all times.
• Participate in safety briefings, toolbox talks, and contribute to hazard identification and incident reporting.
• Maintain accurate records of winch operations and support compliance with offshore HSE standards.

✅ Candidate Requirements:

• Minimum 5 years total oilfield experience, including at least 2 years as a Winch Operator.
• Certification: Valid IWCF Level 3 (Well Intervention or Drilling) or IADC equivalent.
• HWU Familiarity Requirement:
• Either: Worked on the same HWU for 6 months within the past 12 months,
• OR: 3 years experience with the same HWU equipment (e.g., winch systems, rig-up configuration).
• Proven track record in winch operations during P&A and workover campaigns.
• Must hold valid BOSIET and offshore medical certificates.
• Strong commitment to HSE practices and teamwork.
• Available for immediate mobilisation.

🌍 Project Info:

• Location: Offshore Seligi Block, Terengganu / Peninsular Malaysia
• Project Type: Plug & Abandonment / Workover (HWU)
• Duration: 6 months with possible extensions
• Eligibility: Open to Malaysians or expats with valid RPT status only

🧰 Jack Operator – HWU Plug & Abandonment / Workover

📍 Offshore Terengganu (Seligi Block)

📅 Start: Immediate | ⏳ 6-Month Contract

🔧 Contract Type: Freelance | RPT-Only (Local or Expats)

We are looking for a seasoned Jack Operator with extensive hands-on experience in Hydraulic Workover Unit (HWU) operations to support a high-priority Plug & Abandonment (P&A) and Workover campaign offshore Terengganu. You will play a critical role in ensuring safe, efficient rig-up/rig-down and jack operation activities, in alignment with industry best practices and client standards.

🔍 Role Responsibilities:

• Operate jacking systems on HWUs during P&A and workover operations.
• Ensure safe and efficient rig moves, platform positioning, and jack leg deployment.
• Coordinate with rig crew, client representatives, and marine logistics teams.
• Perform equipment inspections, troubleshoot issues, and ensure readiness before operations.
• Contribute to safety meetings, toolbox talks, and HSE incident reporting.
• Maintain accurate operational logs and support compliance with offshore regulations.
• 
  

✅ Candidate Requirements:

• Minimum 8 years total experience, including 3+ years specifically as Jack Operator
• Certification: Valid IWCF Level 4 (Well Intervention or Drilling) or IADC equivalent
• Demonstrated experience in offshore HWU operations, with:
• Either 6 months on the same HWU within the last 12 months
• Or 3 years with the same HWU equipment (e.g., jacking systems, skidding gear)
• Proven participation in P&A and workover campaigns on similar jack-up platforms or modular rigs
• BOSIET & medical certificates must be valid at the time of deployment
• Strong safety awareness and familiarity with T7 or similar operator standards
• Able to mobilize immediately



🌍 Project Info:

• Offshore assignment in Seligi Block, Terengganu waters
• 6-month duration with potential extensions
• RPT-only: Malaysian nationals or expats with valid RPT status

Our client is looking for a highly skilled and certified Structural QC Inspector for the 2nd shift to support our fabrication activities at our Batam yard. The successful candidate will be responsible for ensuring all structural and welding work meets the specified codes, standards, and project requirements. This role is critical to maintaining quality and safety standards throughout the fabrication process.

Key Responsibilities:

• Perform inspections and verifications of structural and welding activities in accordance with applicable codes, standards, and project specifications.
• Monitor welding processes, joint fit-up, and final welds to ensure compliance with quality standards.
• Review and verify WPS, PQRs, and welder qualifications.
• Conduct NDT methods such as UT, RT, MT, PT, RI, and PAUT within the scope of certification.
• Prepare and maintain detailed inspection reports and records.
• Identify non-conformities and assist in root cause analysis and corrective action implementation.
• Collaborate with production and QA/QC teams to resolve quality issues and ensure timely project delivery.
• Support audits and inspections conducted by clients and third-party representatives.

Qualifications & Certifications:

• CSWIP 3.1 Welding Inspector
• PCN UT Level 2
• ISO 9712 RT Level 3
• ISO 9712 UT Level 3
• ISO 9712 UT Level 2
• UT/MT/PT/RI/PAUT ASNT Level 2