Mechanical freelance

Responsible for planning, executing, and leading pre-commissioning and commissioning activities for offshore and onshore oil & gas facilities, ensuring systems are completed, tested, and handed over safely in compliance with project specifications and international standards.

Superintendent, Supervisor / Technician, Engineer

About ten (10) years working experience in ranged from Mechanical engineer, Construction Engineer, and Project Engineer who responsible in technical work such as design, calculation, work planning, project control, and engineering documentation. He also responsible to manage site work and delegate work among team from various department.

Engineer, Supervisor / Technician

• Construction experienced mechanical engineer. • Pre-Commissioning, Commissioning, Preservation, Mechanical completing, CCMS (Shell commissioning software in PDO Oman), check sheets, defining commissioning systems and sub systems, cost estimation, Velocity Air blowing, Lube Oil Flushing, Chemical Cleaning, Nitrogen / Helium Leak Testing, Flange management, Drying & Inserting of various Mechanical equipment and/or Piping. • Mechanical engineer with maintenance experience (static and rotation equipment). • Preparing detailed daily, weekly monthly and survey reports. • Piping Engineering, piping layout, hydro test, leaking test, Piping stress experienced. LPG experienced • Pipeline. • Refinery experienced mechanical engineer. Maintenance. • Crude oil tanks and tank farm maintenance activities. Site and office project engineering. Document management. Supervising of contractor teams on site. • Managing of "Department for preparation and manufacturing planning". Team leading of engineering group. Involving to maintenance activities. • Mechanical designing and computation of piping and mechanical devices (also springs included) in oil and gas industry and petrochemical industry • Mechanical designing of valves and fitting for industrial manufacturing according to ANSI, API, DIN, TEMA, NFPA, ISO and YUS Standards. During work to PDO Oman was in touch to Shell Design and Engineering Practices (DEPs). • CAD Design Engineering • As built activities and visually surveys

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

Hard Driven hands- on project, construction & commissioning personnel with more than 10 years of operation in oil and gas industry from downstream to upstream scope of work. Able to hold position in multiple layers in organization and independent in most working condition. A team player who listens and understand. Proven track record in major project worth up to RM200mln. At least 2 major EPCC and 2 major shutdown belts in hand.

Engineer, Manager, Superintendent, Supervisor / Technician

Multi-skilled project management professional with more than 22 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

FIELD SERVICE TECHNICIAN with 20 years’ experience setting up and conducting testing and running of subsea equipment in workshop and offshore environments. Versed in Hydraulic control systems, IWOCs; hydro and gas pressure testing; mechanical assembly; fluid cleanliness. Highly flexible and capable in testing and assembly in both workshop and offshore environment. Focused on defining best practices and meeting quality standards and delivery deadlines. Extensive experience working with clients and implementing standard quality assurance processes. Thorough understanding of quality control inspections, examinations and testing. Focused on meeting deadlines and exceeding expectations. Motivated team player who works well in diverse team environment Willing to travel, flexible schedule and willingness to work long hours.

Supervisor / Technician, Inspector, Other

SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.

Engineer, Superintendent, Supervisor / Technician, Manager

Adaptable and innovative qualified Mechanical Engineer with over 15 years of experience in the power generation sector. My experience includes working within maintenance, installation, and commissioning power stations, especially gas and steam turbines in the most best-selling brands in different capacities such as; GE, Alstom , Siemens, Mitsubishi and Ansaldo Energia. I have ability to analyze engineering problems, evaluate and recommend alternative solutions and communicate recommendations effectively with strengths include ability to work in multinational environment, good problem solving, hands on team player, able to work at all levels and under pressure, self motivated, energetic with leading management and strong communications skills. I have always been intrigued by and cherished the idea of working in a competitive environment and been seeking an opportunity to express my potentials.

Engineer

Hi, welcome and thank you for checking out my profile! I am currently working as a Freelance Mechanical engineer in fields of : design, computational mechanics, programming (/automating) and project management. I completed my Mechanical & Design Engineering studies with a Master in Business & Management. I am looking for missions to make a big impact in a company/research group taking on new and exciting challenges. Competencies : Automating | Finite Element Analysis / Method | CAE | CAD | 3D Design | Project Management | Continuous Improvment | Research & Development | Process | Method Design & Simulation softwares : SolidWorks | Catia | Oneshape | Ansys | Abaqus Programming languages : VBA | MATLAB | Python Other softwares : Power BI | Microsoft Excel | SAP | Pack Office Let's work together !

Engineer, Supervisor / Technician, Manager, Other, Superintendent, Inspector, Drafter / Designer

Over 13 years’ broad experience in leading from mechanical installation to full cycle pre-commissioning and commissioning rotating & static equipment’s from onshore to offshore of over 20 major brownfield and greenfield platform’s along with FPSO comprises of EPCC, EPCIC, EPCM and PCC projects with set deadlines, budgets along with scopes. Skilled in leading and managing construction & commissioning teams, decommissioning/ make safe of major equipment’s, troubleshooting, generating commissioning test plans, start up, stabilizing till performance test as well as managing mechanical completion systems. Known as a flexible and dedicated professional with solid technical background as well as outstanding time management, interpersonal and multitasking capabilities.

Engineer, Supervisor / Technician, Superintendent

I am an experienced drafter with over 7 years of expertise in piping, tank, and mechanical drafting within engineering, industrial, and marine sectors. I specialise in preparing piping GA drawings, isometric drawings, pipe support details, and technical documentation for both brownfield and greenfield projects. Proficient in AutoCAD, Autodesk Inventor, SolidWorks, and Aveva Marine, I have strong experience interpreting P&ID and plot plans to develop accurate and compliant piping layouts. I am accustomed to working closely with engineers, project managers, and multidisciplinary teams to ensure drawings meet project specifications, deadlines, and quality standards. I am detail-orientated, organised, and capable of managing multiple projects simultaneously. I am currently seeking opportunities to further grow my technical expertise and contribute effectively to engineering and construction projects.

Drafter / Designer

*Construction / Quality Controller / Mechanical Completion* Fabrication and erection of Jack up Drilling Rig, Offshore (Platform). Completely knowledgeable in Welding, HVAC, Piping, and Rotating and Static Equipment Installations. Various types of Testing during Mechanical Completion i.e. Pressure Test (pneumatic & hydro) on process piping, HVAC and testing for pre-commissioning.

Inspector, Engineer

I am an experienced engineer with up to 15 working years in Project, Technical and Construction disciplines. I have been involved in large-scale Energy Projects (Oil & Gas and Power Generation) with the Project Team. Experience with Multinational Corporations (MNCs) has developed my technical knowledge, management skills and intra-personal attributes. Throughout my professional role as Lead Engineer at GE, my mission is to steer complex EPC projects to success. The leadership role in the APAC region has honed my skills in ensuring the fulfillment of project expectations. I am looking forward to seeking senior positions related to Project Management and Technical to deliver positive results with performance-oriented organizations.

Engineer, Manager

independent

Inspector

Over 16 years’ experience in oil and gas & green hydrogen plant industry in multi-discipline engineering background specialist in Mechanical Package engineering with a wide range of project execution ranging from engineering design (Pre-FEED, FEED, PDMS, ASME, API, PTS and CAP), procurement, construction, installation, hook-up and commissioning (CTP, LUN & JHA) for offshore & onshore facilities (WHP, CPP, FPSO, FSO & Plant) . Develop ALS spreadsheet to utilize inspection data for enhance plant integrity and life service or operational. Also performing Fitness For Service (FFS) assessment on the identified effected area due to fire or blast and come out with the result or recommendation from the findings. On top that, involvement in TBE process and develop engineering deliverables during FEED & Details design stages and recently be a part of corrosion and involvement with the CR workshop.

Engineer, Manager

    I am a young, energetic, well-motivated professional. I have excellent Technical skill and believe in participatory learning process and approach. I can maintain the technical matters relating to Mechanical, Civil, hydraulic and Industrial mechanics. I have done my work with Saudi Aramco & Dar Petroleum. I am having ability to function in a multicultural environment, to lead and motivate multinational teams and familiarity with cost management processes.  Assuring of my best services at all 

Inspector, Engineer, Supervisor / Technician

  Professional Engineer, with over 18 years of experience across upstream, downstream, LNG, and FPSO projects, specializing in FEED and EPCC execution. Proven expertise in piping design, mechanical packages, static equipment, and critical valve troubleshooting, with strong knowledge of ASME, API, BS EN, and operator standards including Shell DEP, PETRONAS PTS, ExxonMobil GP, and SAES. Demonstrated leadership in delivering complex projects such as MLNG plant upgrades, RAPID P7 Polypropylene, and BCOT system enhancements, managing multidisciplinary teams, and mentoring engineers to achieve technical excellence. Skilled in corrosion and reliability management, risk mitigation (HAZOP/HAZID), mechanical installation, commissioning, and project optimization, consistently delivering safe, compliant, and cost-effective solutions while generating significant operational and commercial value.

Engineer, Manager

I am highly experienced working in multinational mega class projects in various demanding positions such as a project manager, purchaser, package manager, project engineer technical account manager, and designer. Main industry has been shipbuilding and offshore projects.

Engineer, Inspector, Manager, Supervisor / Technician

Graduate Engineer with a Bachelor’s Degree in Mechatronics Engineering (Hons.), specializing in mechanical systems, robotics, electronics, and automation. Proficient in AutoCAD, SOLIDWORKS, Inventor, Fusion 360, and Revit, with additional skills in Arduino prototyping, PLC programming, and C++. Demonstrated attention to detail and adaptability in site inspections, QA/QC reporting, and technical documentation. Seeking a Junior CAD Engineer role to contribute precise drafting, design validation, and engineering documentation expertise.

Drafter / Designer, Engineer

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Project Coordinator and Technician with 4+ years' experience driving safe, timely site execution in Oil & Gas and heavy equipment maintenance. Coordinate contractors, PTW, and HSE compliance, materials and work packs, and daily reporting on projects including works at Sabah Oil & Gas Terminal (SOGT), ensuring deliverables consistently meet scope and quality standards. Enabled seamless teamwork among clients, engineers, and cross-functional teams by coordinating project meetings and driving timely issue resolution through clear, proactive communication, resulting in 8 successful project outcomes. Hands-on mechanical/electrical diagnostics background enables root-cause problem solving and preventive maintenance; proficient in Microsoft Office and Excel.

Engineer, Manager, Inspector, Supervisor / Technician

Senior Project Quality Advisor | QA/QC Manager | Manufacturing & Fabrication Background | ISO 9001 Lead Auditor | MAPM | 30+ Years Oil & Gas My career began within machine shop and fabrication environments, where I gained over 20 years of hands-on manufacturing experience covering machining, fabrication, mechanical assembly and shop floor inspection. This early career experience provided a strong practical understanding of manufacturing processes, materials, tolerances, inspection techniques and equipment fabrication, which I continue to apply when overseeing vendor manufacturing and inspection activities across major energy projects. Building on this foundation, I progressed into Project Engineering, Project Management and Quality Assurance / Quality Control leadership roles, supporting major capital projects with organisations including Wood, Aker Solutions, AMEC Foster Wheeler, PD&MS Group, KCA Deutag and Sumitomo Corporation. I have extensive experience delivering projects across the full lifecycle including FEED, detailed engineering, procurement, vendor manufacturing, inspection, installation and commissioning. My technical background spans subsea control systems, wellheads, valves, mechanical equipment, OCTG, piping systems, drilling infrastructure and topsides modifications. A key strength is the integration of practical manufacturing knowledge with project quality governance, enabling effective management of vendor supply chains and early identification of technical and quality risks. I have significant experience managing global vendor inspection programmes, manufacturing surveillance, FAT oversight, certification compliance and project quality documentation. I am highly experienced in developing and implementing Inspection & Test Plans (ITPs), vendor inspection strategies, audit programmes and quality management systems, ensuring compliance with client specifications, international codes and ISO standards. I am an IRCA Certified ISO 9001:2015 Lead Auditor and a Full Member of the Association for Project Management (MAPM), combining practical engineering experience with structured project governance and quality management expertise. Known for my practical, solutions-driven approach, I work effectively with engineering teams, fabrication facilities, suppliers and client stakeholders to resolve complex technical and quality challenges while maintaining project delivery objectives. I am available for Project Quality Leadership, QA/QC Manager, Vendor Surveillance Lead or Senior Project Engineering roles across oil & gas, energy and infrastructure projects within UK and international markets.

Manager, Engineer, Inspector

Chartered civil/structural and maritime engineer with 16 years’ multi-disciplinary experience in design, inspection, asset management of, and remediation design for, infrastructure in the energy, transport, civil and industrial sectors.

Engineer, Inspector