Piping freelance

Dynamic and accomplished chemical engineer with a wealth of industry experience, adept at navigating complex  challenges with poise and strategic logic. Proven track record in orchestrating multiple competing tasks to ensure  seamless project execution from conceptualization to completion. A progressive, technically-savvy leader with a  keen analytical mindset, dedicated to driving continuous process and procedural improvements that enhance  outcomes and align with organizational strategic goals.   Expert in cost and budget control, consistently delivering projects within financial constraints while maximizing  efficiency and value. Known for a collaborative approach to building and managing business relationships, adept at  resolving issues, translating complex information clearly, and fostering strong rapport across all levels, both  internally and externally, in traditional and remote distributed environments. 

Engineer, Manager, Translator

Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.

Engineer, Superintendent, Supervisor / Technician, Inspector

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

More than 12 years’ experience in Oil & Gas, Manufacturing Heavy Equipment, and Power Plant fabrication. Qualified Welding Inspector CSWIP 3.2, CSWIP 3.1 and CSWIP 3.0 certified by TWI Certification. ASNT Level II NDT Inspection is certified by the Offshore Technology Institute (OTI). Qualified Painting inspector certified by Lapis Baja Inspektindo. Qualified for Installation and Assembling of Small GRP Pipe and Fitting certified by ORI Group. Demonstrates strong attention to detail in inspection weld quality. Comes with a Bachelor of Mechanical Engineering degree. Having experience to develop QC procedure base on Client Specification, Project Specification, Code and Standard applicable (AWS, ASME, MOTS, API, ISO, DNV). Undertaken Projects covering a wide range of Oil & Gas structures, Pipe Rack foundations, Substation module, Well Head and Riser Platforms, Accommodation Platform, Process Platform, FPSO modules, and Power Plant.

Inspector, Supervisor / Technician, Other

He has over 23 years of industrial experience working in energy and utilities industry performing inspection, assessment and providing specialist advice/solution, leadership and mentoring in quality, with over 17 years in the capacity of supervisor up to acting Company Site Representative (CSR). He is a Welding/NDT Inspector by training, however for the most part of his career as a quality personnel, most of the time he dealt with multi disciplinary missions. His high proficiency in welding QC therefore, is strongly backed by demonstrated competencies and knowledge in other associated disciplines i.e. structural, piping, mechanical packages equipment (static and common rotating equipment), Mechanical Joints Integrity, protective coatings and vibration basics. He is also stands in as a Construction Supervisor when required, with significant contribution to the field works progress. Consistently upgrading his career where from year 2008 onwards he continued as a quality team member represented esteemed end users and EPCC such as PETRONAS, Woodside Energy, Eni, Shell, Saipem and Foster Wheeler etc. In year 2012 he was heavily involved in subsea projects performed vendor surveillance for the manufacturing of drilling and wells completion equipment such as wellheads, Christmas trees (XT) including its associated equipment and tools, Subsea Control Modules (SCM), production manifolds and pipelines (WPQT/WQT and multi joints fabrication). Extensive hands on experiences in multiple disciplines and project cycles has made him versatile, adaptable to the fast track project environment, able to anticipate problems and further provide solutions in wider perspective besides make timely decisions in daily activities relevant to the specific project. He had attained distinguished track records in delivering Quality Management System (QMS) programs through his commitment towards “Do It Right First Time” and continuous improvement in numerous major projects related to hydrocarbon processing equipment and facilities ranging from greenfield development to brownfield modification (including plants reconstruction, rejuvenation, revamp and turnaround).

Inspector, Supervisor / Technician

Multi-skilled project management professional with more than 20 years' progressive experience overseeing large-scale infrastructural project within Oil and Gas industry to schedule and budget. Possessing vast depth of Mechanical/Piping Engineering, Civil/Structural Engineering, Technical Construction/ Fabrication Management and Method, managerial, Project Management and Planning Scheduling experience on leading multi-disciplinary teams within multi-cultural environments. Familiar working with International Standard such as ASME, AWS, API, ASTM, ABS, BS/EN, JIS, AS/NZ, etc. Seeks a challenging and varied position that will enable me to capitalize on sound technical, Engineering, commercial and project management expertise, with opportunities for personal and professional growth.

Manager, Superintendent, Engineer

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

Hi Im Aiman .For your information,this year I am 29 years old. I graduated from University Technology Malaysia with a Bachelor Degree in Naval Architecture and Offshore Engineering.Currently , I am Project Application Engineer in Lutz Jesco East Asia Sdn Bhd since 2019 which has mostly been involved in Water Treatment Plant and chemical plants . Before this , I have been working in the oil and gas industry for 2 years as a project engineer at Petrico Engineering Sdn Bhd (2017-2019) of which which have successfully managed various projects throughout these years. I am aware that the company has been engaged in some exciting projects and initiatives in the industry in recent years. As you can see, I have been involved in similar work and I could greatly contribute to your company’s goals in the future. I am highly passionate to work in this industry. In addition, I also have high competencies in AutoCad, Solidwork,PV-elite and Maxsurf which will be an added value to your organisation.  Attached herewith is my CV and certificate for your kind reference .I really look forward to meeting with you and discussing my qualification in more detail Thanks

Engineer

Mechanical engineer experienced in maintenance, inspection, training and designing fields of fluid power systems, lifting, static and rotating equipment. Passionate in 3D designing, additive manufacturing, rapid prototyping, and simulation analysis. Attained the NCEES FE mechanical exam pass and eager to obtain the professional licensure.

Engineer, Drafter / Designer

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

Graduate in bachelor of Mechanical Engineering from Andalas University with an interest in metallurgy and material. A fast learner person, highly motivated and great passion in EPCI industry. I have prior experience of 6 years as a piping engineer at Mcdermott Indonesia with a demonstrated history of working as detailed engineer, pre-commisioning, piping completion, reinstatement, create piping erection workpack by ASSET 55, and as FAT (Factory Acceptance Test) Engineer for subsea pipeline project of BP Tortue Phase 1A. Skilled with AutoCAD, Naviswork, Piping Process, Pipeline, Subsea Testing Methods, Pipe Stress Analysis. Registered as Professional engineers by PII (Indonesian Institution of Engineers).

Engineer

Experienced Piping Stress Engineer in analyzing and designing piping systems to ensure structural integrity and compliance with industry standards. Proficient in stress analysis, pipe support design, and leveraging advanced software tool such as CAESAR II. Demonstrated expertise in performing complex calculations, evaluating thermal and mechanical stresses, and providing solutions to mitigate potential issues. Adept at collaborating with multidisciplinary teams to deliver high-quality engineering solutions on schedule and within budget.

Engineer, Drafter / Designer

Domingo V. Granado Jr. is a seasoned Piping Designer and Engineer with extensive experience in high-profile projects for elite EPCM companies. Notable contributions include work on RasGas Exxon Mobil and QatarGas ExxonMobil LNG Process Trains with Chiyoda Corporation, GLNG Upstream Project with SANTOS Australia at Fluor Philippines, and Chevron's Bibiyana Gas Field with Foster Wheeler Thailand. At Mitsubishi Heavy Industries, he played a key role in major chemical projects such as ExxonMobil's and SABIC Gulf Coast Growth Ventures, North American Growth and Baytown Expansion Projects. His practical Field Piping Engineer experience includes Petronas Sabah Ammonia and Urea Project and Qatargas Exxonmobil LNG Project. Spearheaded facility engineering and project management for industrial and commercial projects with Achievers Business Group Inc.

Engineer, Drafter / Designer

I am an experienced Mechanical & Piping Drafter/Designer with over 6 years in oil & gas, petrochemical, and power industries. I have strong expertise in AutoCAD, Plant 3D, and Inventor, with hands-on experience producing detailed 2D/3D drawings, isometrics, equipment layouts, and support details. My past roles involved working closely with multidisciplinary teams, conducting site validation, managing as-built documentation, and ensuring compliance with ASME/API standards. I am highly adaptable, detail-oriented, and committed to delivering high-quality deliverables under tight timelines. I'm ready to travel or relocate and can start immediately.

Drafter / Designer

• More than 15 years experiences in oil & gas /or related industries in QA/QC Department. • Understanding on welding, static equipment, structure inspection, piping, NDT inspection/ tool/ method and corrosion monitoring. • Familiar with the relevant drawing and another relevant international code & standards (API, ASME, AWS, BS, JIS, DIN, etc)

Inspector, Supervisor / Technician

EXPERIENCE : HAVING 12 YEARS OF EXPERIENCE IN INDUSTRIAL FIELD, WELDING, QUALITY CONTROL (QC), MECHANICAL & PIPING TESTING, FACTORY ACCEPTANCE TEST (FAT) INSPECTION & COMMISIONNING, TURNAROUND IN OIL & GAS (ONSHORE & OFFSHORE), POWER PLANT, SHIPBUILDING CONSTRUCTION PROJECT AS PROJECT COORDINATOR, MECHANICAL & PIPING INSPECTOR, QC SUPERVISOR/COORDINATOR AND QA/QC ENGINEER.

Engineer, Inspector

With 20 years of experience in drafting and engineering design, I specialize in P&ID drafting, SolidWorks modeling, AutoCAD customization, and automation solutions to optimize engineering workflows. My experience spans across different industries including O&G, PetroChemical, Mining, food, industrial, and automotive manufacturing, where I’ve delivered high-precision designs, process diagrams, and automation tools to streamline operations. 🔹 What I Offer: ✔ P&ID Drafting & CAD Administration – Expertise in iDrawings, SmartPlant P&ID, AutoCAD, and AVEVA. ✔ SolidWorks 3D Modeling – Design of mechanical parts, assemblies, and industrial fixtures. ✔ AutoCAD & SolidWorks Automation – Custom scripts, LISP routines, and macros for efficiency. ✔ Excel & Database Integration – Automating reports, data processing, and engineering calculations. ✔ Project Management – 4+ years of leading projects, coordinating teams, and delivering quality results. I thrive on efficiency, accuracy, and automation, ensuring every project execution is optimized for quality on-time deliverable. Whether you need detailed P&IDs, 3D models, or custom automation solutions, I can deliver cost-effective, high-quality results tailored to your needs.

Drafter / Designer, Manager, Supervisor / Technician, Other

Capable to advise and finding the best code for Customs Tariff in the Harmonized Commodity Description and Coding System or HS Code. Knowledgeable and have experience in Import License (AP) application to MITI as well as and Tax Exemption application (MOF's /MIDA procedures and Customs requirements). Familiar and have experience in handling of Oil & Gas material such as, line pipes, Structural Steel and Equipment. Love challenging job and do not have a problem to work in long hour or traveling outstation to execute assignment given. Willing to travel.

Manager

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

* QC Inspector (Structural, Mechanical & Piping) for Gas Turbine Compressor Package; Medco E&P Natuna; FPSO Marlin Natuna Forel Baronang Project * Chief QAQC for Oil Pipeline Replacement size 4" to 28", 350 Km Minas Duri Dumai; PGN Solution: Chevron (PERTAMINA) Rokan Project * Welding Inspector for installation 10" pipeline 1 Km ORF Petronas to SAKA ORF; PGN Solution; Bukit Tua Project * QC Engineer for Installation 42" pipeline 15,6 Km, Kp26,5 to ORF ENI; Agia Pertiwi; Lean Gas Project * Project Manager for Certification for Offshore Platform Subsidence Project; DNVGL; Yadana Project (Myanmar) * Residence Inspector for Certification for Offshore Platform Living Quarter & Flare; DNVGL; Great Bongkot South Project (Thailand) * Residence Inspector for Inatallation 28' & 32" of Pipeline 450 Km; GL Nusantara; South Sumatera West Java Project

Engineer, Inspector, Supervisor / Technician

I am a male 31 years old, my background education Bachelor of Mechanical Engineering study program, hard worker, fast leaner, self-motivated and good interpersonal skill, more than 9 years experiences industy such as : oil & gas fabrication, shipyard, mechanical manufacture & civil construction. Specifically for Piping Engineer 3 years as Piping Engineer and more than HVAC Engineer 1 years also 7 years as design and drafter.   During my time in the engineering department, I have skills in analysis, calculation, simulation moreover design modelling and drafting. In my work I am used to using CAESAR II software for (Pipe Stress Analysis), Autocad Plant 3D for (Piping & Equipment Modelling), Solidworks for (Mechanical Design) and finally Autocad for Drafting.   I am confident in responsibility such as : piping analysis dan simulation, piping modelling and shop drawings, also create Material take Off (MTO) and Bill of Material (BOM). I also can be create design and simulation mechanical equipment include start from shop drawing until report.

Drafter / Designer, Engineer

Construction manager Aramco approved&approval from Saline Water Conversion Corporation SWCC&approval from the Saudi Council of Engineering (Engineering Expert) Dear Sir Kindly be informed that I am ready to transfer my IQAMA immediately. I am currently available in Saudi Arabia, and I have a total of 20 years of experience in the Kingdom of Saudi Arabia . I have approved Aramco. I have approval from Saline Water Conversion Corporation SWCC. I have approval from the Saudi Council of Engineering (Engineering Expert) I have approval from the Saudi Council of Engineering. Transferable Iqama/Applicable immediately. Current Location :Makkhe- saudi arabia Current Company: Binladin grop (Abdal) Current Designation:construction manager A driving license in Saudi Arabia is available. Attached are my contact details and a detailed CV. Thanks and regards Yasser Dyab mr_yassr2006@yahoo.com [mr_yassr2006@yahoo.com] Mob. # 00966504911076 and 00966590249134

My name is Saqib Ali, and I hold a degree in Mechanical Engineering with 05 years of valuable professional experience. During my career, I had the privilege of contributing to significant projects, including the greenfield project at Nishat Sutas Dairy and a brownfield project at COCA-COLA Beverages PAKISTAN(CCI). In these roles, I played a pivotal role in managing utility and process piping projects, overseeing the installation of Piping, valves, Pumps, and Plate Heat Exchangers (PHEs). My expertise extends to creating comprehensive 2D and 3D drawings, Hydrotesting of piping, piping, enabling precise project execution as per engineering specifications. I have excellent skills of Solidworks and AutoCAD and good knowledge of International standard (ASME,ISO,ASTM,API ). I am enthusiastic about exploring new opportunities where I can leverage my skills and experience to make meaningful contributions.

Engineer

Diploma in Quality Engineering Technology, with over 6 years of experience in quality control and welding inspection, I have worked across various companies like Hamdan Abdullah Sdn Bhd (HASB), Faiz Engineering Services Sdn Bhd (FESSB), and Seremban Engineering Berhad (SEB), providing expertise in welding and fabrication inspections. I specialize in ensuring compliance with industry standards and client specifications, managing critical inspections for pressure vessels, structural frames, and piping. My experience includes material handling, safety and compliance management, calibration, flange integrity, and non-destructive testing (NDT) techniques like UT and MPI. As a Freelance Offshore QC Welding Inspector, I lead inspection teams, provide training, and ensure accurate documentation, maintaining high-quality standards throughout the project lifecycle. I also oversee coatings and surface treatments, ensuring compliance with safety and quality regulations.

Inspector