Automation freelance

I have more than 15 years of extensive experience in the oil & gas industry (offshore and onshore or combination of both offshore and onshore). My experience covered most stages of the project: Front End Engineering Design (FEED), Detailed Design Engineering (DDE), Construction, Hook-Up, Pre-Commissioning & Commissioning, even in some parts of conceptual design. My core discipline area is Instrument and Control System (plus Telecommunication System) and have been the key persons for major instrument packages such as Integrated Control and Safety System (ICSS), Distributed Control System (DCS), Fire Alarm Control Panel and Fire Suppression System, Custody Ultrasonic Gas Metering System, Pressure Reducing Station, Wellhead Control Panel, Analyzer System, Automatic Tank Gauging System, Control Valves, Shutdown Valves, Manual On/Off Valves, Motor Operated Valves, Pressure Safety Valves, Field Transmitter, Telecommunication System, etc. In addition, my experience also includes major involvement in the development of electrical packages (MCC / Switchgear, UPS, etc.), mechanical packages (Heater System, CO2 Snuffing Packages) and HVAC systems. My project experience covered greenfield and brownfield project of offshore wellhead platform, refinery and petrochemical complex, onshore receiving facility, offshore and onshore pipeline, offshore offloading platform, power plant, storage tank area and LPG Terminal. I have experience in becoming Lead Engineer on several occasions, i.e. Lead Instrument, Control and Telecom Engineer for JAWA 1 Project (JV or Pertamina, Marubeni and Sojitz), Lead Instrument & Control Engineer for Bukit Tua Infill Wells Project (Petronas) and as Lead Telecom Engineer for Su Tu Nau Wellhead Platforms FEED Project (CLJOC). I had coordination and interface experience as Project Coordinator during my tenure in TOSHIBA for DCS Migration at Tanjung Jati B Power Plant Unit 1 and JAWA 1 Project (as additional role), which improved my comprehensiveness in knowledge about project execution, coordination and interface.

Engineer, Manager

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

More than 23 years of experience with several multinational companies. Experience in project management, construction and engineering in Oil & Gas industry, green energy. Hands on engineering design experience for electrical/control system, industrial robot programming and mechanical design in industrial automation particularly in manufacturing and automotive industry.

Engineer, Manager, Superintendent

More than 15 years experience of working years in Engineering Design in Oil and Gas Industry as an Instrument Engineer for both Brownfield and Greenfield projects. Involved in various engineering stage; Conceptual, FEED and basic engineering design, detail engineering design and EPCC work for Upstream and Downstream facilities. Familiar with the preparation of the instrumentation design drawings and documents, Instrument Loop Diagram, Instrument Location Plans, Instruments Installation and Hook-ups Details, Cable Block Diagrams, Instrument Schedules, Instrument Datasheets and Material Take-off. Experiences in onshore and offshore design of Instrument works and site visit for work scoping. Experience working with various multinational counterparts throughout projects as client PMT as well as consultant.

Engineer

Performance-driven engineer with a demonstrated success of 15+ years in petrochemical, fertilizer, and refinery plants. Skilled in designing, developing, and maintaining control systems for industrial processes. Proficient in process optimization, automation solutions, and ensuring compliance with major industry standards and safety regulations. Strong background in performing root cause analysis, loop tuning, and calibration of instrumentation to ensure efficient and reliable system performance. Experienced in implementing cost-effective solutions to maximize operational efficiency and minimize downtime.

* 15+ yrs of Experience in Automation * 12 Year Experience in Honeywell DCS, * Worked as Lead Engineer * 5 Yrs Experience on Schneider PLC * Worked on MODBUS,FF, Profibus * Project experience of End to End execution. * Detail Engineering, FAT,SAT, Site Commissioning,

Engineer, Superintendent

I am Mechanical Engineer with some many experience and abilties. Among them are machine maintenance, engine repair, calibration and 3D drawing. Al of that can be seen from my experience working and organization.

Engineer

With 20 years of experience in drafting and engineering design, I specialize in P&ID drafting, SolidWorks modeling, AutoCAD customization, and automation solutions to optimize engineering workflows. My experience spans across different industries including O&G, PetroChemical, Mining, food, industrial, and automotive manufacturing, where I’ve delivered high-precision designs, process diagrams, and automation tools to streamline operations. 🔹 What I Offer: ✔ P&ID Drafting & CAD Administration – Expertise in iDrawings, SmartPlant P&ID, AutoCAD, and AVEVA. ✔ SolidWorks 3D Modeling – Design of mechanical parts, assemblies, and industrial fixtures. ✔ AutoCAD & SolidWorks Automation – Custom scripts, LISP routines, and macros for efficiency. ✔ Excel & Database Integration – Automating reports, data processing, and engineering calculations. ✔ Project Management – 4+ years of leading projects, coordinating teams, and delivering quality results. I thrive on efficiency, accuracy, and automation, ensuring every project execution is optimized for quality on-time deliverable. Whether you need detailed P&IDs, 3D models, or custom automation solutions, I can deliver cost-effective, high-quality results tailored to your needs.

Drafter / Designer, Manager, Supervisor / Technician, Other

Committed and professional electrical, instrumentation and automation engineer familiar with standard electrical, instrumentation and automation requirements. More than twenty years experiences in proposal/tender, engineering design, procurement and project execution of electrical, instrumentation, automation control system and its construction for oil and gas, manufacturing and petrochemical industry. Strong management and leadership abilities for delegating tasks or providing instruction clearly and accurately. Prioritize, organize work and meet deadline. Strong communication skills, ability to work independently with best in team, self-motivated and ability to manage changing priorities.

Engineer, Manager

20 years of experience in Instrumentation & Controls and SURF. Specialized in Engineering Design including Concept Select, FEED and Detailed Design. Participate in all project development cycle including Assembly & Testing, Fabrication & Construction and Hook-Up & Commissioning for Topside, Floater and Subsea project.

Engineer

A highly skilled and detail-oriented design engineer with over 15 years of experience in product design, development, and analysis. Possessing a strong foundation in GD&T ANSI and ASME Y14.5M-1994 standards, I am adept at utilizing CATIA V4, CATIA V5, and Solidworks to create innovative and efficient designs. As a Certified Solidworks Professional with specialized certifications in Advanced Sheet Metal, Weldments, and Advanced Drawing Tools, I bring a comprehensive understanding to every project. My experience at Gowra Engineering Technologies Pvt. Ltd. has allowed me to excel as a Project Lead and Senior Project Engineer, contributing to diverse projects ranging from automotive systems to industrial equipment. I am also experienced with ISO 9001:2008 external audits, demonstrating a commitment to quality and process improvement. With a Bachelor's degree in Mechanical Engineering, I am passionate about applying my technical skills and analytical abilities to solve complex engineering challenges.

Drafter / Designer, Engineer, Manager, Other

A seasoned, upstream oil and gas professional with a diverse set of experience in the fields of well construction, drilling engineering, drilling performance optimization and drilling project management.

Engineer, Manager

Engineering professional with 6+ years of hands-on experience working in public and private sectors in North Africa in Industrial Automation, Electronic Instrumentation, ICS (industrial control systems), Integrated Control and Safety Systems ((PLC, ESD, TMC, SCADA, F&G, Vendor packages), HMI, and Batch Control applications) in Oil & Gas and Power industries. I have worked in different areas and locations (office, staging, onshore sites) with different cultures and nations. I have been participating in many aspects of the job cycle, including technical issues, preparing functional design specifications, interfacing with customers during all project phases, project and applications engineering, FAT, Integrated FAT, SAT, Loop check, Pre-Commissioning, Commissioning, start up activities and operation and maintenance phase.

Engineer

Renewable Energy Engineer over 20 years experience

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician, Drafter / Designer

tes

Drafter / Designer

1. Qatar Gas 2. Aramco 3. NPCC 4. MCDERMOTT

Supervisor / Technician, Engineer

More than 15 years experience for control system, for engineering until plant startup

Engineer

More than 20 years of work experience in upstream and downstream, oil and gas industry specifically as an exploration & production (E&P) offshore facility engineer, refinery process engineering specialist, crude oil trader, and petroleum fuels retailer. Possess deep industry knowledge and competency in business development, customer relationship management (CRM), sales, marketing & trading, enterprise resource planning (ERP), supply-chain procurement & management, logistics, and, project engineering & management.

Manager, Engineer, Drafter / Designer

Result-driven Equipment Engineer with 2 years of experience in manufacturing industry and 1 year in construction industry. + Specialize in installing, commissioning, and troubleshooting production equipment, including junction boxes, connectors, and framing machines. + Collaborates effectively with cross-functional teams to identify and address challenges. Proficient in troubleshooting and technical support. + Committed to maintaining compliance with industry regulations. Excellent communications and interpersonal skills facilitate productive relationships with stakeholders. + Ensured safety and operational compliance across diverse industrial processes.

Engineer

A highly skilled Control and Instrumentation Engineer with 17 years of total experience, including 15 years in the Oil and Gas industry. Certified as a Functional Safety Engineer (FS Eng – TÜV Rheinland) through Yokogawa Europe B.V., with deep expertise in safety systems, process automation, and control engineering. Proven ability to manage diverse responsibilities by effectively prioritizing tasks, setting clear deadlines, and developing innovative solutions to overcome challenges and drive results. Proficient in working across a wide range of control and safety systems, including YOKOGAWA, HONEYWELL, SCHNEIDER, INVENSYS, SIEMENS, ROCKWELL, and HIMA. Possess hands-on experience in Site Acceptance Testing (SAT), loop checks, commissioning, functional testing, and troubleshooting for control and safety systems, fire and gas (F&G) systems, field instrumentation, and Well Head Control Panels (WHCP). Equally effective working independently or within cross-functional teams, with a consistent focus on quality, safety, and performance. My experience has equipped me with the necessary skills to succeed in this position: - Possess strong technical knowledge in the specification, design, installation, operation,and maintenance of Safety Instrumented Systems (SIS) in accordance with IEC 61508and IEC 61511 standards. - Hands-on experience in logic modification, maintenance, and troubleshooting ofDistributed Control Systems (DCS), Safety System Logic Solvers, Programmable LogicControllers (PLC), Supervisory Control and Data Acquisition (SCADA) systems, andHuman-Machine Interface (HMI) screens. - Experienced in executing upgrade projects for Integrated Control and Safety Systems(ICSS), including technical updates and system enhancement activities.- Skilled in commissioning, start-up, and maintenance of Burner Management Systems(BMS), compressors, and fire and gas detection systems. - Skilled in commissioning, start-up, and maintenance of Burner Management Systems(BMS), compressors, and fire and gas detection systems. - Skilled in implementing new configurations, logic, and graphic pages in DCS, SCADA,RTU, PLC control systems, and HMI for new installations. - Proficient in Construction, Pre-Commissioning, Commissioning & Start-up of Oil andGas Wells and plants. - Extensive experience in commissioning, testing, modifying, calibrating, andtroubleshooting Well Head Control Panel Systems (WHCP), field transmitters, controland safety valves, and other instrumentation. - Strong interpersonal skills, enabling effective collaboration with engineeringcontractors, vendors, and project teams in a multi-disciplinary work environment. - Experienced in the technical evaluation of spare parts, preparation of Scope of Work(SOW), and the review and validation of engineering documents and vendor contractsrelated to instrumentation and ICSS systems.

• 14 years’ experience as Instrumentation & Control Engineer and Project Engineer role in Offshore Oil & Gas, Chemical, LNG, Power industry, Engineering Design background, graduated from Beijing University of Chemical Technology which is a national key university for “Project 211” in China. • Involved project phases including: Tendering/Proposal, PSR, Concept, Pre-FEED/FEED, DED, Construction, Installation, Pre-Commissioning/Commissioning, Start-Up, etc. • Coordination for Project Engineering & Execution, Stewardship for Vendors and associated FAT/SAT, Facilitation for Procurement and site Construction & Commissioning, Support for Process Unit System Completion: TO, MC and HO, etc. • Steward contractor’s performance, engaging/aligning key stakeholders, engaging discipline engineers and other project resources as required, to complete the assigned scope consistent with the Project Objectives. • Support Procurement to prepare Material Requisition and assess vendor’s Proposal and Quotation, help to expedite vendor’s fabrication to meet project Critical Path requirement. • Engage Project Team and Contractors to verify that the design, procurement and construction is consistent with project requirements and completed within the established schedule. • Actively manage interfaces and ensure adequate engagement between all stakeholders (i.e. Construction, Commissioning, Engineering, Operations, Maintenance, 3rd Party Suppliers, etc.). • Coordinate procurement packages with Contractor and Company Technical Personnel to ensure technical requirements are met and equipment delivery dates support the Project schedule. • Ensure smooth transitions between project stages, across sites and between key stakeholders. Coordinate constructability inputs, project issues resolution, and change requests. • Familiar with Process Control System (PLC/DCS), Safety Instrumented System (SIS), Fire and Gas System (FGS), System Hardware Designing/Modeling, Proficient in Field Instrumentation, Analyzer, Control Valve, Mastered at IC&S Engineering Deliverables, e.g. Index, I/O List, Technical Data Sheet, Hook-up, Cable Routing, Cause & Effect, Logic Diagram, etc., Familiar with Field Engineering, Red Line Mark Up, Site Instruction Sheet (SIS), Quality Control Form (QCF), Advanced Check Sheet (ACS), Punch Closure, DCN Implementation, etc. • Skilled with Office & Graphic Software like: Microsoft Office & AutoCAD & Adobe Acrobat, Familiar with HMI Software like: InTouch, FactoryTalk, Familiar with 3D Model Review Software like: SmartPlant, Navisworks, Familiar with Engineering Design Software like: Autoplant, COMOS, AVEVA, SPIntools. • Familiar with Standards & Codes like: IEC, ASME, ANSI, API, ISA, PIP, etc. • Dedicated, Team-Oriented, Detail-Focused, with Strong Communication and Problem-Solving abilities.

Mechanical engineer with a passion for industrial and process design.

Engineer, Manager

Dynamic Asset Management Officer at BPJS Ketenagakerjaan with proven expertise in risk assessment and strategic planning. Successfully developed optimization tools enhancing portfolio performance, while fostering strong client relationships. Adept in project management and AutoCAD, I consistently deliver projects on time, driving efficiency and innovation in every initiative. 

Engineer, Drafter / Designer, Inspector, Manager, Superintendent, Supervisor / Technician

I'm an Automation System Engineer with 17 years of work experience in several fields, who is always seeking new challenges with a dynamic organization which will enable me to apply my education and creative skills to the benefit of the organization .And I am willing to give total support to that organization. Also I enjoy team work with the experience and capability that I have, in order to achieve the organization's goals and create mutual benefits. Contact: obasselt@yahoo.co.uk mob: 00963955926169

Chief Electrician having 15 years of experience in Jack up rigs,drillships.Able to work as Electronic Technician.