Automation freelance

As Instrument & Control Engineer with +6 years of work experience in EPCC (Engineering, Procurement, Construction and Commissioning) for Oil & Gas, Power Plant and Petrochemical Project. Have experience in calculating, designing, installing, and maintaining industrial instrumentation systems. Develope documents such as, General Specification, Datasheet Field Instrument (Pressure, Temperature, Analyzer, Level and Flow), Calculation of Relief Valve, Control Valve and Design wiring of Field Instrument, Loop Diagram, Logic Diagram, Block Diagram and Control Sytem Architecture Diagram / ICSS Architecture Diagram. Also have in-depth knowledge of various instruments and process controls used in industrial settings, including sensors, transmitters, PID control, and automated control systems.

Engineer

Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.

Engineer

Senior Instrument and Control System Engineer with 20 years of experience in project execution, design validation, and commissioning of instrumentation systems across petrochemical, power generation plants, and oil & gas sectors. Proven ability to coordinate multidisciplinary engineering activities, prepare technical documentation, and support construction teams during installation and commissioning phases. Extensive experience in validating vendor-supplied control valves, process sensors, and safety elements in compliance with international standards

Engineer, Supervisor / Technician, Superintendent, Inspector

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

More than 15 years experience of working years in Engineering Design in Oil and Gas Industry as an Instrument Engineer for both Brownfield and Greenfield projects. Involved in various engineering stage; Conceptual, FEED and basic engineering design, detail engineering design and EPCC work for Upstream and Downstream facilities. Familiar with the preparation of the instrumentation design drawings and documents, Instrument Loop Diagram, Instrument Location Plans, Instruments Installation and Hook-ups Details, Cable Block Diagrams, Instrument Schedules, Instrument Datasheets and Material Take-off. Experiences in onshore and offshore design of Instrument works and site visit for work scoping. Experience working with various multinational counterparts throughout projects as client PMT as well as consultant.

Engineer

I have experience in offshore and onshore job for more than 9 years in Process Control System, Shutdown, Fire and Gas System engineering from design to software development. Total of 12 years including my earlier career in manufacturing. I have found my true passion and seeking for onsite working environment for new challenges and to improve my knowledge in instrumentation. I look forward to hands on jobs and believe knowledge and hands on experience are needed to truly understand and improve any system.

Engineer

More than 23 years of experience with several multinational companies. Experience in project management, construction and engineering in Oil & Gas industry, green energy. Hands on engineering design experience for electrical/control system, industrial robot programming and mechanical design in industrial automation particularly in manufacturing and automotive industry.

Engineer, Manager, Superintendent

Hi my name is Narizuan. I would to join as one of your crew in any region of world. My experience before mostly in offshore vessel for around 7 years and my last job is at eastern urisnia psv as a mechanic. I already have experience in different type of vessel including semisub drilling rig, diving vessel, multi purpose supply vessel, pipelay vessel and my capable position as mechanic and i know my task very well depending on my hired position. I work well alone and also in team and i am very capable to follow any order given and work very safe all the time. All my document is valid including full vaccination, bosiet+ebs,marine/offshore medical, stcw basic training. Attach is my cv for your review and here my contact number for more information. +60137227207.

Supervisor / Technician

* 15+ yrs of Experience in Automation * 12 Year Experience in Honeywell DCS, * Worked as Lead Engineer * 5 Yrs Experience on Schneider PLC * Worked on MODBUS,FF, Profibus * Project experience of End to End execution. * Detail Engineering, FAT,SAT, Site Commissioning,

Engineer, Superintendent

With 20 years of experience in drafting and engineering design, I specialize in P&ID drafting, SolidWorks modeling, AutoCAD customization, and automation solutions to optimize engineering workflows. My experience spans across different industries including O&G, PetroChemical, Mining, food, industrial, and automotive manufacturing, where I’ve delivered high-precision designs, process diagrams, and automation tools to streamline operations. 🔹 What I Offer: ✔ P&ID Drafting & CAD Administration – Expertise in iDrawings, SmartPlant P&ID, AutoCAD, and AVEVA. ✔ SolidWorks 3D Modeling – Design of mechanical parts, assemblies, and industrial fixtures. ✔ AutoCAD & SolidWorks Automation – Custom scripts, LISP routines, and macros for efficiency. ✔ Excel & Database Integration – Automating reports, data processing, and engineering calculations. ✔ Project Management – 4+ years of leading projects, coordinating teams, and delivering quality results. I thrive on efficiency, accuracy, and automation, ensuring every project execution is optimized for quality on-time deliverable. Whether you need detailed P&IDs, 3D models, or custom automation solutions, I can deliver cost-effective, high-quality results tailored to your needs.

Drafter / Designer, Manager, Supervisor / Technician, Other

Fast learner, fast adaptation and hard working

Drafter / Designer, Engineer

Engineering professional with 6+ years of hands-on experience working in public and private sectors in North Africa in Industrial Automation, Electronic Instrumentation, ICS (industrial control systems), Integrated Control and Safety Systems ((PLC, ESD, TMC, SCADA, F&G, Vendor packages), HMI, and Batch Control applications) in Oil & Gas and Power industries. I have worked in different areas and locations (office, staging, onshore sites) with different cultures and nations. I have been participating in many aspects of the job cycle, including technical issues, preparing functional design specifications, interfacing with customers during all project phases, project and applications engineering, FAT, Integrated FAT, SAT, Loop check, Pre-Commissioning, Commissioning, start up activities and operation and maintenance phase.

Engineer

Project engineering in Instrumentation .Successfully completed 2 major project. TUV certified functional safety engineer. Currently working as Reliability engineer in Shell . Having rich experience in commissioning, troubleshooting, operations and maintenance of field instruments,DCS,PLCs,Control valves,ESD valves,Well head control panel and Fire & Gas detectors. Responsible for reviewing Material requisition wrt design specification.TBA analysis.vendor short listing. Expediting with vendors for manufacturing of the materials. Actively involving in client meetings and acting as front face to the project.

Engineer

Graduate of Bachelor of Science in Electronics & Communication Engineer with the following skill summary. Continuous experience in FEED, Detail Design Engineering, Construction & Commissioning of Greenfield and Brownfield projects for Oil & Gas, Petrochemical, Power and Telecommunication industry. Specializing in Instrumentation & Control which requires both knowledge of industry practices/standards, and the ability to use computer software for preparing deliverables. Has knowledge in conventional instruments, Foundation Fieldbus, DCS, SIS, F&G, Electrical and Telecom systems. Work experience includes; Commissioning Engineer (Pre-Comm/Comm), Engineering Support for Construction, Design Engineer/Designer, Checker for Design Deliverables. Provide Technical assistance in Instrumentation & Automation and Telecom device installation, mechanical completion testing, precommissioning, commissioning and troubleshooting. Factory Acceptance Test and Site Acceptance Test of DCS, FGS, SIS and Vendor Packages. Subcon/vendor document review and coordination during construction. Additional experience includes involvement in project management, scheduling and procurement.

Engineer, Drafter / Designer

tes

Drafter / Designer

 I'm Nino Nieves, a Filipino. With over 18 years of extensive experience in the erection, commissioning, and implementation of instrumentation systems across diverse industries, I am confident in ensuring optimal performance and reliability of complex systems. My strong background in project management and technical execution positions me to make significant contributions to your team and drive successful project outcomes. Throughout my career, I have led numerous projects that demanded a comprehensive understanding of instrumentation and control systems. I have expertly managed the installation and commissioning of advanced instrumentation equipment, consistently ensuring compliance with industry standards and regulations. My proficiency in data acquisition, process control, and system integration has enabled me to troubleshoot effectively and optimize processes, resulting in enhanced efficiency and minimal downtime. Beyond my technical skills, I excel as a proactive communicator and collaborator. I have forged strong partnerships with multidisciplinary teams, including engineers, technicians, and clients, to deliver projects on time and within budget. My ability to articulate complex technical concepts has fostered productive working relationships and facilitated successful project execution.

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

Electrical Engineer with Experience in Residual and Commercial buildings, Drafting, project management, Electrical Wiring, Fire Alarm Systems, Smart houses, Building Automation.

Drafter / Designer, Engineer, Manager

17 Experience as an Instrumentation Designer, SP Administrator and S3D Administrator

Engineer

Renewable Energy Engineer over 20 years experience

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician, Drafter / Designer

I am an Instrument & Control Engineer with 4 years total experience. I have experience at proposal phase from start-up / operation and maintenance phase. I am able to build, design and calculate equipment that relate to instrumentation and control such as gauge and transmitter, control valve and on-off valve, PLC and DCS include in build flowchart process to execution phase. I can work with thigh schedule and high pressure condition. If possible with my schedule,I can witness and doing FAT and Commissioning, Please do not hesitate to contact me for more information

Engineer

More than 20 years of work experience in upstream and downstream, oil and gas industry specifically as an exploration & production (E&P) offshore facility engineer, refinery process engineering specialist, crude oil trader, and petroleum fuels retailer. Possess deep industry knowledge and competency in business development, customer relationship management (CRM), sales, marketing & trading, enterprise resource planning (ERP), supply-chain procurement & management, logistics, and, project engineering & management.

Manager, Engineer, Drafter / Designer

Mechanical engineer with a passion for industrial and process design.

Engineer, Manager

I am a Civil Engineer with experience in structural design and construction supervision. I worked on a project using Revit, AutoCAD, and Robot Structural Analysis to make buildings more efficient and cost-effective. Currently, I am a site supervisor for a factory construction project, managing materials and quality control. I am passionate about improving construction through better design and technology.

Drafter / Designer, Engineer, Inspector, Supervisor / Technician

My name is Mohamed Abd Elaziz, and I am an Instrument and Control Engineer with 15 years of experience in the oil & gas industry. Currently, I serve as senior I&C engineer at Badr Eldin Petroleum Company in Egypt, where I have played a pivotal role in numerous EPC projects. Throughout my career, I have developed extensive expertise in field instrumentation, electrical equipment construction, QC inspection, and commissioning. I take pride in my ability to ensure the successful execution of projects from conception to completion, adhering to the highest industry standards. I am keen to explore opportunities where my skills and experience align with your esteemed company’s requirements. I have attached my resume for your review. Thank you for considering my application. I look forward to the possibility of discussing how my background may contribute to your team.

Engineer, Inspector, Superintendent

Chief Electrician having 15 years of experience in Jack up rigs,drillships.Able to work as Electronic Technician.