Automation freelance

* 28 years’ experience and fully grown in the field of Instrumentation and Control System engineering discipline. * Experience in project management for Instrumentation & Control discipline from Conceptual/FEED, engineering/detail design stage, construction stage and pre‐ commissioning/commissioning/start‐up. * Experience in field instrumentation, i.e.: flow meters, control valves, choke valves, actuated shutdown valves and instrumentation in packaged equipment, as well as ICSS/DCS/PLC/RTU system engineering, process control and safety system application. * Involved and provide support in quality control & assurance (inspection and acceptance tests), hook‐up & tie‐in (installation/construction), pre‐commissioning, and commissioning activities. * Perform inter‐disciplinary support, communication, and coordination as well as with contractors/vendors/ suppliers or third party to achieve scope completion. * LNG project experience for gas production facilities (reservoir/wellhead platforms) and onshore LNG production facilities, from pre-FEED (conceptual), FEED (Select & Define/Optimize), Detailed Engineering Design, and engineering support to QA/QC (FAT and field/site test), Construction/Installation, Commissioning until Handover to Operation. * Engineering support to Operation of LNG refinery in Papua – Indonesia (Tangguh LNG), seconded in Facility Support squad, as well as supporting Reliability & Maintainability squad, Production Management squad, Well Intervention team, site maintenance team, and site project team.

Engineer

I am an experienced Instrumentation and Control Systems Engineer specializing in pre-commissioning and commissioning activities. With over two decades of professional experience in multinational oil and gas companies and engineering firms, I have expertise in managing complex engineering projects, troubleshooting advanced equipment faults, and ensuring compliance with industry standards. I am holding a bachelor’s degree in physics from the Institute of Technology Bandung (ITB), my career highlights include leading roles in projects such as smelters, LNG plants, and wellhead platform developments. I am also well-versed in programming PLCs, SCADA systems, and commissioning management systems, complemented by extensive certifications in safety, HSE, and operational excellence.

Engineer, Superintendent, Supervisor / Technician

"I am a very curious man with expertise in Mechanical Engineering who love to do experiments. I have been involved in several projects related with Design Engineering, Product Design and Design Consultants. Experience as 3D Design Engineer with Software Design Autodesk Inventor Professional and AutoCAD"

Supervisor / Technician, Engineer, Manager, Superintendent, Drafter / Designer

3+ years experience working on PT Gudang Garam Tbk as a mechanical technician. Have experience in tobacco company specialist on packer machine, units or equipment have been handled: Packer GD X6, NX Stamper, C800 Wrapper, BV Cartoner; Packer GD X3000, CN Stamper, C800 Wrapper, BV Cartoner.

Supervisor / Technician, Engineer, Manager

As an Engineering Manager with over 31 years of extensive experience in the engineering sector, primarily focused on commissioning, construction, and project management across various industries, I am eager to contribute my expertise to Bechtel's Hydro Generation projects. My goal is to leverage my deep understanding of technical and commercial aspects of large-scale projects, along with my proficiency in advanced process controls and engineering coordination, to drive successful project outcomes. I am particularly drawn to Bechtel's commitment to innovation and excellence in the energy sector, and I am excited about the opportunity to play a key role in delivering high-quality engineering solutions.

Engineer

Certified Lean Six Sigma Green Belt, manage projects using data driven methodology, lean methodology, DMAIC format to improve quality, yield, performance and overall output of manufacturing, equipment and process. Data analysis using JMP tools, to evaluate data collection, trend analysis, commonality study and root cause analysis. Experienced in project management, root cause analysis using Lean tools, improvement plan generation, design and development for best practice. Develop and maintain process failure mode and effect analysis, control plan, process specifications, work instructions and out of control plan for lean and efficient equipment and process management. Evaluating Front end engineering design (FEED), design drawings, design specifications, single line diagram (SLD), process flow diagram (PFD) and process and instrument design (P&ID) and generate the bill of material, procedures for safety and cost management. Creation of engineering designs, simulations and analysis for the manufacture and machining of engineering products and application of technical and commercial expertise to the task given to satisfy legislation, costing and customer and employer requirements. Plan, administer, and carry out preventive and corrective maintenance for generators, boilers, and cooling towers, diagnose rotor machines and apply Hazard Identification, Risk Assessment, and Risk Control (HIRARC) to job scope to avoid the hazard, danger, fatality, and property economic loss. Organizing personal and team (if present) and meeting schedule and deadlines and creating budget- consciousness and profit-consciousness for any given project, mission, and assignment. Communicate clearly, deliver presentations or report with confidence and prepare a precise and accurate report for any given task or assignment. Computer literacy: Catia V5, ANSYS, Solidworks, Microsoft office softwares, JMP. Knowledge of: PFMEA, Control Plan, OSHA, FEM, ASME, ISO 9000, ISO 14000, conjugate heat transfer analysis, rotor diagnostic, Bently Navada vibration diagnostic, technical engineering drawing, solid and fluid stress analysis, project management and industrial management.

Engineer

1. YINSON Production / Petrobras. – FPSO Maria Quitéria ProjectYinson Production has been awarded by Petrobras for the chartering and servicing of the FPSO Maria Quitéria bound for Offshore Brazil. The FPSO is planned to be located in the Jubarte field of Espírito Santo Basin, where the water depth is up to 1400 meters.The field development is planned with flexible risers tied back to a riser balcony on the spread moored FPSO. A total of 62 flexible risers, umbilicals and fibre optic cables may be terminated at the FPSO riser balcony.The FPSO shall be designed for 30 years of operation.Assignment  : Project Quality Manager. 2. Woodside Energy Services. – FPSO Sangomar Phase 1 Development Project. The Sangomar field (formerly the SNE field), containing both oil and gas, is located 100 kilometers south of Dakar West Africa. Work on the Sangomar Field Development commenced in early 2020 and first oil production is targeted in 2023. Assignment  : Quality Control LEAD. 3. TechnipFMC Assignment :Quality Steel Structures Lead on LBT yard. Project : ARCTIC LNG 2 4. FREE LANCE INSPECTOR on CALL.

I am a passionate Electrical Engineering graduate with a GPA of 3.61 from Andalas University, specializing in control systems, instrumentation, and automation. With hands-on experience as a substation operator at PT PLN (Persero) and a full-time assistant in the Digital Control Laboratory, I bring expertise in PLC programming, high-voltage systems, and digital control solutions. My collaborative projects, such as developing IoT-integrated machine learning systems for health diagnostics, highlight my ability to merge innovative thinking with technical precision. As the Coordinator of the Electrical Division for the Andalas University Robot Team, I led advanced robotic projects for national competitions.

Engineer

Iam Devan from India I did graduate in instrumentation and control engineering in 2024

Engineer

Senior Electrical Engineer with eight years of experience in the designing, modeling, and testing electrical systems specifically five years of that in the Marine and Oil & Gas offshore and onshore sector and the other two years in the Mining Industry. Certified by ICEO as a professional engineer and one year in development and operating&maitenance

Engineer

Im a individual that hunger for knowledge, and ready to learn new experience

Engineer