Hire the best freelancers in civil for your project
13+ years of techno-managerial experience as a Civil Structural engineer spanning onshore Power transmission & distribution structures, ofshore & subsea oil exploration structures. Highly motivated individual seeking a position in which managerial and engineering expertise can be put to good use. Skilled in all phases of engineering. Consistently finishes projects under budget and ahead of schedule maintaining the highest quality and standard of the work.
Engineer
* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage
Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician
6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.
Engineer
- 22 years industry experience in engineering, construction and project management in multi-cultural and challenging environments. - Proven experience and achievement in Oil & Gas greenfield/brownfield onshore and offshore projects, civil works and buildings, power plant, logistics and agrifood industry, air traffic control facilities. - International experience from small to large scale projects within different types of organizations such as operating, engineering and construction contractor companies, joint ventures.
Engineer
Registered Grad Eng. under Board of Engineers Malaysia (BEM) with 7 years of working experience in various downstream EPCC greenfield and brownfield projects (Oil and gas, Petrochemical/Refinery, Construction and Data Centre) in multi-discipline engineering (Civil, Structural, Mechanical, Piping and E&I). Highly proficient in Project & Construction management, Project planning & scheduling, and Project cost control.
Engineer
I am a multidisciplinary civil and construction professional with over 8 years of experience across engineering design, project planning, and on-site construction coordination in major EPC, O&G, and infrastructure projects across Indonesia. My experience includes working with top-tier clients such as PT Freeport Indonesia, PT Pertamina, Medco E&P, and PT Cikarang Listrindo through reputable engineering and construction firms such as PT Chiyoda International Indonesia, PT IKPT, and PT MiCE Engineering. In recent roles, I have handled large-scale projects involving marine structures, jetty and firewater systems, and civil infrastructure for energy plants, assuming responsibilities from engineering design reviews to site execution and commissioning readiness. I bring strong familiarity with subsea-related EPC work, deepwater feasibility and DED studies, and construction planning for coastal LNG terminal relocation, which aligns with offshore and subsea system demands. Key Highlights: Lead Construction Manager for EPC of Substation and Workshop Buildings in Manyar Smelter Project – PT Freeport Indonesia, valued at USD 3.17 billion, with coordination of up to 600 workers. Senior Civil Engineer & Project Coordinator for Jetty Firewater System Modification (Deepwater Terminal – Senoro CPP) and Produced Water Handling Upgrade (From 2,000 to 8,000 bpd). Oversaw engineering preparation for LNG Terminal Relocation in BMTH Area (client: PT Pelindo Multi Terminal). Extensive experience in civil and marine-related EPC scopes, including pile, foundation, structural steel, and utility integration in industrial and coastal zones. Holder of IAMPI - Young Experts of Project Management (A.MP) certification and various safety, commissioning, and construction management trainings (LOTOTO, JSA, Commissioning by PT Freeport Indonesia, etc.). I am actively seeking opportunities in offshore and subsea installation projects and am open to relocation to Shenzhen, China. I am confident that my combined field, engineering, and coordination expertise will bring strong value to Trees Engineering's Shenzhen team.
Manager, Engineer
Experience : An Electrical Engineer in consulting and EPCC environment, undertaking roles of an assigned engineer, team lead, technical lead, independent checker and electrical engineering lead. Over the years I have the invaluable opportunity to successfully lead and deliver complete pre‐project / tender stage proposals, executing conceptual design, detailed design, coordinating and managing stake holders during design stage, FAT, SAT, equipment installation, and power supply application to authority. I have the privilege to be exposed to various industries including oil & gas, railway, water works and infrastructure. My experience to deliver pre‐project / tender stage proposals include producing / reviewing / approving ITB review, clarifications to Owner, preparation of requisitions to procurement, technical and commercial evaluation for selection of Vendors, manhour estimation, technical writeup, preparation of cost summary and preparation of bill of quantities for electrical scope. My hands on experience during conceptual and detailed design stages include producing / reviewing / approving deliverables for power distribution system, building services and layouts, interfacing with various equipment and disciplines, review & approval of power system studies. In addition to design related exposure, I am fortunate to have the opportunity to manage an electrical Team which includes manhour control, progress & coordination meetings, assignment of tasks, KPI setting and evaluation, training, mentoring and developing electrical skills).
Engineer
Work undertaken that best illustrates capability to handle the tasks assigned · Substantial years of experience in railway engineering starting with the rehabilitation works of KTMB commuter line where existing railway lines were dismantled and re-laid with insertion of geocell and upgraded crusher run and ballast. The rehabilitation was done in a period of two days’ non-stop work per segment and handed over to KTMB for resumption of the Commuter services. This job was undertaken as a Contractor’s representative. After completion of this project I joined the Rawang-Ipoh Electrified Double Track Project, as a Consultant’s site representative where my job entails site supervision of the construction of the new additional track and upgrading of the existing railway track. Successful completion of the Light Rail Transit Extension Works (KLJ Line Extension) LRT2 costing MYR 6 billion for the government concessionaire company Prasarana Berhad. Participated in the LRT3 project implementation up to the tendering stage especially the LRT Depot Works. · Specialization in wastewater engineering, having been involved in three projects concerning construction of sewage treatment plants and sewerage mainlines. Two of the projects were mega project like Pantai Sewerage Treatment Plant costing more than RM 400 million and Kota Kinabalu Sewerage System, Sabah which costs more than RM 183 million. Substantial experience in water retaining reinforced concrete structures; aeration tanks, clarifiers, digesters and etc. · More than 10 years’ experiences in structural and building works having worked for a property developer; to build a 224-unit resort development in Genting Highlands and was also responsible for the construction of a 1000/person capacity private college adjacent to the resort under the same management. I successfully completed the project and was reassigned as the Operations Manager to handle the facilities and assets management of the project. · More than 30 years’ experiences in infrastructure works; having involved in earthworks, road & drainage, piling, bridge construction, ground treatment methods and retaining wall structures. · Several years’ experience in Integrated Building Systems (IBS); prefabrication construction where I was involved in the Teachers Housing project consisting of 10,000 units built in several states in Malaysia. · Experienced in Industrial Buildings brownfield/greenfield construction works working with international clients like AG Continental Tyres, Dutchlady Milk Industries, Dindings Poultry Plant and MacFood Services (TYSON).
Manager
To acquire an engineering and management position where I can both enhance my skills, gain knowledge and experience to make a positive contribution and grow with your company as an inspiring planning engineer in the oil & gas industry. I have a great patience and capable to work under pressure both independently and as a collaborative team member.
Engineer
EXPERIENCE : HAVING 12 YEARS OF EXPERIENCE IN INDUSTRIAL FIELD, WELDING, QUALITY CONTROL (QC), MECHANICAL & PIPING TESTING, FACTORY ACCEPTANCE TEST (FAT) INSPECTION & COMMISIONNING, TURNAROUND IN OIL & GAS (ONSHORE & OFFSHORE), POWER PLANT, SHIPBUILDING CONSTRUCTION PROJECT AS PROJECT COORDINATOR, MECHANICAL & PIPING INSPECTOR, QC SUPERVISOR/COORDINATOR AND QA/QC ENGINEER.
Engineer, Inspector
I have the ability to work as a good team player, good communication, and good teamwork skill. Then, with many experiences in team work during studying at universities. I understand what it means to be a part of a team members and how to work in a group to accomplish goals. I am also flexible and open minded, adaptable, creative, hardworking, independent, self-motivated.
Engineer
Across his extensive career trajectory, he has engaged in a diverse array of projects encompassing On-Shore Structure, Data Center, Industry Building and Facilities, Commercial Building, Mosque, Airport Terminal & Infrastructure, Convention Centers, Pedestrian Bridge, Residential Development, and low-rise to high rise structures. His expertise extends to development of new facilities, refurbishment, renovation & rejuvenation of the existing facilities, independent structural checking, and conducting structural incident investigations, with a particular focus on reinforced concrete, steel, and composite steel design. He has experienced in: * Undertaking the Civil & Structural engineering static and dynamic design of projects or key components of large projects, from Front-End Loading (FEL-1 to FEL-3) and Front-End Engineering Design (FEED) through to detailed design and construction support. * Coordinating the design process and integrating the design requirements from various partners involved. * Participate in BIM and 3D Model coordination to assist in the implementation of the project BIM Execution Plan (BEP) or Engineering Management Plan (EMP). * Performing design reviews and conducting checks as an Independent Checker Engineer (ICE) for both structural and civil engineering projects, ensuring compliance with relevant codes, standards, and client specification. * Attending project meetings and communicating with all grades of staff, external design team members and clients. * Ensuring compliance with design code (BS & EC) QAQC standards as set out in the company’s quality procedures. * Prepare and review civil and structrual design deliverables (Design Basis, Specification, Design Report, Material Take Off, Drawing).
Engineer
EPCC OF 800 KW POWER + 1400 KW COOLING CAPACITY COGENERATION FACILITY Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 12 million Duration: May 2022 – Oct 2023 * Led turnkey EPCC execution of an integrated cogeneration system comprising 800 kW Capstone microturbine, 1,400 kW absorption chiller, cooling tower, and auxiliary systems. * Directed end-to-end project lifecycle from concept, detailed engineering, procurement, construction, to commissioning. * Achieved regulatory approvals from BOMBA, DOE, and MDPT with zero re-submissions — first-pass compliance on all technical dossiers and safety submissions. * Delivered mechanical completion and system commissioning 3 weeks ahead of schedule, with zero punch list on client handover. * Integrated SCADA and power management systems across thermal, electrical, and chilled water assets with full load synchronization. SCADA SYSTEM MODIFICATION & OPTIMIZATION – 1MW CAPSTONE MICROTURBINE Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 1.7 million Duration: May 2022 – Oct 2023 * Engineered a full PLC/SCADA revamp for 1MW Capstone C1000S microturbine integrated with solar PV, thermal oil heater, and plant-wide MSBs. * Implemented advanced logic for fault detection, dynamic load balancing, and power prioritization across multi-source energy systems. * Optimized system sequencing for microturbine and auxiliary operations, improving thermal-electrical efficiency by over 15%. * Achieved system commissioning and performance validation within 2 weeks, including HMI development and I/O mapping across redundant PLC networks. PETRONAS RAPID – ALLOY PIPING FABRICATION & INSTALLATION Client: OUIJV Role: Project Manager Value: RM 8 million Duration: Sep 2016 – Jan 2018 * Managed fabrication, logistics, and installation of over 100,000 Dia-inch of high-alloy piping (Inconel, Duplex SS) to ASME B31.3 and client specifications. * Led full QA/QC regime including RT, UT, PMI, and hydrotesting, achieving 100% client acceptance on first inspection. * Coordinated construction interfaces with civil, structural, and mechanical contractors in live plant environments. * Delivered project on schedule with zero NCRs and full compliance with Petronas and DOSH standards. OFFSHORE HOOK-UP & FLOWLINE INSTALLATION – DANA PLATFORM Client: PCPP Operating Company Role: Senior Project Engineer Value: RM 1 million Duration: Jan 2009 – 2012 * Executed offshore hook-up, spool fabrication, and installation works for flowline and topside piping under PETRONAS and PTS specifications. * Maintained 100% LTI-free record throughout offshore campaign. * Successfully secured two follow-up contracts: * D2 Flow Line Replacement * 6” Piper Valve Service Order * Oversaw cross-discipline coordination (piping, structural, E&I) ensuring seamless interface and “first-time-right” installation during shutdown window.
Manager, Engineer
An experienced in civil/structural Engineer with demonstrated history of working in Oil and Gas industry for both Brownfield and Greenfield project. Well-verse in SACS and Staad-Pro software analysis. Familiar with relevant codes and standards such as AISC, API, DNV. PTS and etc. based on project. Highlight of previous project involved: 1. FPSO Marechal Duque De Caxias (Mero 3 Project) 2. Provision of Structural Integrity Assessment for Petronas Carigali S/B - Sarawak Asset She is also physically fit and willing to be relocated or work remotely. Currently looking for suitable position with forward thinking company.
Engineer
8+ years of experience in Project Operations Management specializing in Plug & Abandonment (P&A), Drilling & Workover, and Well Intervention services for both offshore and onshore rig operations. Extensive expertise in managing Upstream Well Intervention technicality, safety and commercial to support operating and non-operating wells, including gas operations tailored to specific well and reservoir conditions. Additionally skilled in marine spread management, ensuring seamless and successful campaign execution. I take initiative in recognizing problems and creatively work to identify reasonably solutions. I have developed analytical, interpersonal and leadership qualities that are prepared to undertake and get over through challenges in different situation. My objective is to secure knowledge, experience and working attitude in a quality-working environment where my qualities as a fast learner and multi-tasking through new challenges can be met. My conscientious attitude allows me to think ahead and priorities important tasks and I am careful to pay attention to details.
Engineer
Bachelor's in Civil Engineering, experience in advanced structural analysis and offshore engineering with hands-on experience in the PETROBRAS P-82 FPSO project, delivering high-accuracy structural modeling and analysis in compliance with international codes and standards. Proficient in In-service and Pre-service analysis, local design analysis, structural integrity verification and design optimization for offshore topside structures. Experienced in coordinating engineering documentation, supporting interdisciplinary collaboration and enhancing constructability through proactive clash resolution. Strong background in quality assurance, maintaining high execution standards and client satisfaction. Proven ability to represent project teams effectively, ensuring clear communication, technical alignment and successful project delivery.
Engineer
I'm Structural designer that excellent to understand drawing 2d and 3d. Also, I have skill to modelling 2d drawing into 3d model by considering the possibility method of fabrication to suit standard requirement. Otherwise, I'm multi talented designer that be able to work inindependent and work with the team. I will ensure application of the best practices into design work and the design produces fit for purpose resultsin constructible and organized drawing.
Drafter / Designer
- Civil & Structural Engineer with over 10 years of specialized experience in oil and gas sector. - Contributed in 1 Refinery EPC project, 2 Gas Processing Facilities EPC project, 1 Upgrading LNG Regasification Terminal EPCI project and 1 LOBP EPC project. Additionally, possess valuable experience in CCS/ CCUS plant through involvement in Feasibility Study, PreFEED and FEED. - Contributed to multidisciplinary engineering projects with a versatile track record as a Civil Structural Design Engineer, Structural Field Engineer, Assistant Lead Engineer and Senior Civil Engineer. - A collaborative and detail-oriented personal with specialized expertise in steel structure design. - Well-versed in a broad range of design codes (AISC, ACI, ASCE, SNI, UBC, BS, & Eurocode) and engineering standards , with hands-on familiarity with specifications from industry leaders like Shell, BP, Petronas, Worley, JGC, Pertamina, and Medco).
Engineer
Supervisor / Technician, Superintendent, Other, Manager, Inspector, Engineer
in process to achieve his dream of becoming Engineer at Heavy Industry Construction Project
Engineer, Supervisor / Technician
Civil/Structure Engineer with 10+ years of experience designing and managing projects for a variety of clients from FEED stage, DED stage, construction stage, pre-commissioning stage, until mechanical completion. Skilled in leading teams and resolving technical issues. Create a positive and productive work environment by communicating with team members and interdisciplinary to mitigate potential concerns. Provide structural analysis following design basis such as structural building, non-structural building, or non-structural component building and designed in accordance with codes or specifications. In charge of developing and preparing general specifications and construction specifications for civil structures and buildings. Generate the engineering concept, work volume breakdown, specification, and schedule during the FEED (Front End Engineering Design) stage. Review Material Approval Request proposed by subcontractor to meet general and construction specifications, including following up on the delivery schedule of material. Assist the proposal team with requests for quotations for commercial purposes. Coordinate and identify technical queries, deviations, and alternatives to be submitted by the subcontractor. Prepare and coordinate with the QC Department for the ITR or inspection check list. Perform functional tests of indoor firefighting systems, for instance, one of the completion requirements before handover to the client
Engineer
With more than 20 years experience in project / construction management, project handling during construction, mechanical completion, commissioning & start up correctly, management training, revalidation & hand over with operation and maintanance with safely, either for myself, others, equipment and safe in operating the equipment as per safety compliance I’ve been experience in oil and gas facility such as oil tanks, oil refinery complex, plantations, palm oil mill, kernel cruching plant, boiler installation (power plant construction and facility) and process, piping steam, gas, oil, water and waste. Petrochemical building, factory construction specialty for food and beverage (F&B) such as noodle, sauce, mayonnaise, tauco, etc, process, infrastructure and facility. Housing and landed, warehouse, office building, Offshore and Onshore Construction, Jetty construction / Subsea (Reclamation Land, Dredging Subsea, Mooring Dolphin, Jetty, Pier, Wharf, Platform, Hook Up, Civil, Steel Structure, Mechanical, Electrical, Maintenance, Steel and Concrete Piling) , waste ponds, Waste Water Treatment Plant (WWTP), Water Treatment Plant (WTP) for operation and maintenance, desalination water / RO (sea water to fresh water), Turnover / Shutdown for maintenance or other, earthwork, landclearing area, piling works, civil works, steel structure,renovation factory building and process, nickel mining contractor, smelter factory, precious metal refinery (PMR), natural gas, Hydrogen Peroxide, Main Process Building (MPB), High Security Building (HSB), Main Substation, Copper Removal, Slime Receiving & Handling, Wet Chlorination, Dechlorination,Gold Recovery, Cooling Water, Heavy Metal Precipitation, Hydrocloric Acid, etc specialty for Green field project and Brownfield Project.
Manager, Superintendent
Project Manager, Contract Administrator and Civil Engineer with 18 years of experience combining strategic vision, technical excellence and collaborative leadership to drive high-impact projects in the Oil & Gas, infrastructure and energy sectors. Management and Direction of CAPEX Major Projects Investment Projects. Strong leadership skills, strategic decision-making and negotiation with stakeholders. Committed to continuous improvement, operational efficiency and the delivery of results aligned with strategic objectives. Extensive experience directing and leading high-performance multidisciplinary teams, coordinating contractors, overseeing regulatory compliance, safety and contractual deadlines. Certified Professional Project Manager (PMP) with solid skills in Project Lifecycle Management: Scope, Time and Cost Management. Design Management. Risk management. Budget management. Management and administration of FIDIC/NEC contracts; EP, EPC, EPCM (Lump sum, Unit prices, Time & materials). Management and handling of Claims. Schedule management. Purchasing & supplier management. Construction management. Quality Management and EHS. Start-up, Handover & Turnover. Professional with experience in the implementation of Project Management Officer - PMO combining best practices, agile methodology and standards for the management of Investment and Infrastructure Projects: FEL, AACE, AWP, PMI, Lean Project Management and VIPs (Value Improving Practices). My focus during Project Management and Management is to meet the strategic objectives of the organization, generating value and profitability expected by the Operator and the Board of Directors, achieving the satisfaction of the interested parties within the established Budget and deadline.
Superintendent, Manager, Inspector, Engineer, Supervisor / Technician
Since 2015, Our mission is to use top-tier engineering to drive progress and deliver innovative solutions across diverse sectors. We have a strong presence in Engineering, Procurement and Construction Market. Our teams consist of highly skilled professionals from prestigious universities and leading industries, both domestically and internationally. Their combined expertise and innovative approach allow us to create transformative solutions that not only meet today’s needs but also paved the way for future growth. By emphasizing precision in our work, upholding integrity in our actions, and delivering unmatched value to our clients, PT Athiras Sarana Konstruksi continues to shape the future engineering and construction. reach us www.athiras.id
Manager
A professional engineer with over 15 years of experience in the oil and gas industry. Diverse experience with experience as project lead, proposal lead, project management, construction management (EPCC/PMC), proposal design, FEED design and detailed design both within onshore and offshore works. Companies worked for include Technip Energies, TechnipFMC, Toyo Engineering & Air products. Clients worked for include PETRONAS, SHELL, CHEVRON and Long Son Petrochemicals. Team player with excellent collaboration and communication skills to drive the project forward. Dedicated to lifelong learning with a strong technical base.
Drafter / Designer, Engineer, Inspector