Page: 2

Commissioning freelance

  • Bird-eye view on all ongoing projects
  • Browse and match freelancers using AI
  • Manage your jobs postings

Experienced commissioning freelancers

Hire the best commissioning freelancers in the world.

View all
Available
Eduard M.

Eduard M.

$500/daySpecialist

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

ID
Humphery U.

Humphery U.

$620/dayLead

Experienced Quality Assurance Quality Control Specialist with a demonstrated history of about Eighteen(18) years of working in the oil & gas industry. I have worked on several International Oil and gas Company’s Projects locally and internationally , supervising and participating in various construction activties, Piping and Structural Fabrication/Installation, modification & facility upgrade services in Onshore and Offshore facilities at various Technical capacities. I have good working knowledge in Construction, Project management, material inspection, Quality Control, NDT Inspections, painting inspection, Welding and HSE supervision in projects and maintenance operations. I have good interpersonal skills and experience working with International Codes and Standards. I am a good learner and team player looking to impact on projects with the skills and knowledge acquired.

Inspector, Supervisor / Technician, Engineer, Other

NG
Available
YASHDEEP S.

YASHDEEP S.

$50/dayLead

Renewable energy professional with 11 experience in the Design & Engineering of Solar (On-grid, Off-grid), Hybrid (solar+ wind) power plants at various evacuation voltages ranging from 11kV-220kV. Proficient in PVSyst, AutoCAD, Data Analysis & preparing electrical calculation spreadsheets.

Engineer, Drafter / Designer, Inspector, Manager

IN
Available
RETHISH R.

RETHISH R.

$230/dayLead

Accomplished and reliable HSE Professional with over 15 years of rich experience and skills gained from projects in Nigeria, Oman, Kuwait, Libya, Afghanistan, and India in Onshore, Brownfield, Offshore, and Greenfield including construction Pipeline, Engineering, inspection, Commissioning, maintenance, Downstream and Shutdown Activities for various kinds of Projects in several well-reputed companies in the field of Engineering of Oil & Gas, LNG, Refinery / Power Plant, Construction of Industrial-Plant, World Wide, etc. I hold NEBOSH-IGC, IOSH, OSHA, Lead auditor ISO 45001/ ISO 14001 and STCW certifications, a Diploma in Mechanical Engineering, a Diploma in Fire and Safety Engineering & other certifications for HSE.

Supervisor / Technician, Superintendent, Inspector, Engineer

NG
Available
Iain L.

Iain L.

$800/daySpecialist

Senior Upstream Oil and Gas industry technical professional; over 25 years' experience providing solutions in demanding engineering, operations, and project management roles. Extensive global network. Key skills include: Comprehensive E&P Industry knowledge: Thorough understanding of the key fundamentals of the E&P industries' engineering disciplines. Proven ability to leverage these effectively to create business value and reduce HSSE risk. Project Management Exploration, Production Use basic and appropriate safety engineering practices, involve workforce in Process Safety, Improve safety culture, shared values in attitude and approach comes from leadership. Manage project delivery schedule, strictly implement project compliance to ensure project delivery complies with regulations. Responsible for project scope, schedule and cost, detailed planning and motitoring progress and delivery during the implementation phase. Operations Management: Expertise leading Field Development and Operational plans. Held line management project, production, maintenance & HSSE responsibility for complex offshore operation with annual CAPEX and OPEX budget. > $100M. Highly experienced and skilled in setting and managing budgets, operations and safety. FPSO's, subsea facilities and pipelines.

Engineer

MY
Available
DHIYAUDDIN I.

DHIYAUDDIN I.

MYR 425/daySenior

I am a passionate instrument engineer with ten strong years of experiences specializing in Instrumentation & Controls, Fire & Gas and Telecommunication systems spans from oil & gas to construction industries. I offer a unique combination of technical expertise, strong interpersonal skills, and unwavering commitment to excellence. I am confident in my ability to contribute effectively to any project in the instrument engineering field

Engineer

MY
Available
Hanif M.

Hanif M.

$285/daySpecialist

Specialized in instrumentation and control with over 15 years of experience in fabrication yard and upstream offshore oil and gas industry with major projects for greenfield and brownfield. Experienced in EPCIC work environment, interfacing and managing various stakeholders. Well versed in fabrication yard and upstream offshore work environment, international codes and standards practices, quality and safety requirements inclusive SIMOPs, SIPROD and turnaround campaign. Proficient in turnkey project phases from engineering, procurement up to construction, commissioning and project close out. Experienced in field instrumentation and control system packages. Familiar with project execution for CPP, WHP, FSO, FPSO, compressor module and LQ facilities. Used in serving and working in international work environment and with international project team. Assigned as an offshore team lead in projects. Experienced in fast track project implementation.

Engineer

MY
Available
Fahmi S.

Fahmi S.

MYR 280/daySenior

Electrical & Instrument Engineer (Project Management Team) Bach. in Electrical & Electronic Engineering (major in Instrumentation & Control System) with 5 years working experience in Oil & Gas industry. Experienced in Hook-Up & Commissioning for Greenfield, Brownfield, and Well head Platform (WHP) as Project Management Team (PMT). Involved and experienced in engineering, procurement, construction, load out, fabrication & HUC operation. Experienced in safety principles, able to contribute to HAZOPs and Risk Assessments. Determined & positive person. Able to work under pressure. Fast learner and have decent communication skills. Majorly involved in MPFM validation, UPS, DCS and SIS.

Engineer

MY
Available
Meylan R.

Meylan R.

$275/dayLead

A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. I have more than 10 years' experience in onshore & offshore Fabrication, Surface Wellhead X mass Tree & Subsea Wellhead. I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature.

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

ID
Available
Rendra  M.

Rendra M.

$260/daySenior

I have experienced in Oil & Gas and Marine ship building as a Project Engineer with more than 10 years education-working related experienced in engineering, design, and analysist with having good knowledge on International code and standard (ASME, API, ASTM, etc). Familiar on static & rotating equipment, weight control, experienced in sequence of work based on project priority to follow up each discipline related painting, and read engineering drawing. Able to work with ISO9001, ISO14001 and OHSAS18001 Standardization and Quality Management System. Knowledge and experience in project engineer, quality control, production and planning engineer, sales engineer, and construction for various project. Self-motivated possessing, strong written and verbal communication skill, team work, leadership, fast learner and strong personal with ability to communicate at all level

Engineer, Manager, Superintendent, Supervisor / Technician

ID
Available
Mohd Azrin A.

Mohd Azrin A.

$500/dayLead

Malaysian national with almost 15 years of experience in the oil and gas industry projects, maintenance and engineering with specialty in electrical, instrumentation, measurement and control.

Engineer, Manager

MY
Available
Jeffrey J.

Jeffrey J.

MYR 500/daySenior

Instrument and Control Engineer with over 7 years experience in construction, commissioning and maintenance experience in oil and gas industry. Possess a TUV Safety Engineer with experience in different safety shutdown systems.

Engineer, Superintendent

MY
Available
Ade F.

Ade F.

$82/dayLead

Over 11 years of experience in cycles Instrumentation and Control Systems Project activities. Wide understanding of Instrumentation and Control System, including but not limited to Field Instrument and Control System aspect at different stages of Project until completion (FEED, Detail Engineering, HAZOP, FAT, Construction & Pre- Commissioning, Commissioning & Start-Up). Hands-on experience to typical task for Control System and Automation engineer, i.e.: Control System Architecture, Programming/ Control logic implementation and troubleshooting. Familiar with Automation System (DCS and Safety System) mostly with Yokogawa DCS, Yokogawa Prosafe-RS, Emerson Delta-V DCS & SIS and also conversant with kinds of Control System integration with interfacing to other Control System or other Package System (Compressor's PLC, Tank-Gauging, Machinery Protection System (GE Bently-Nevada 3500 and System 1), Analyzer Houses/Building, Metering System, etc). Experiences on Safety Life Cycle as per IEC 61511 and IEC 61508, SIL classification, SIL verification and SIF design. Participate and contributing on PHA, LOPA, HAZOP, HAZID, etc. Competence with Instrument Calculation software and Instrument Database software mostly with InstruCalc. Competence on Typical task for Field Instrumentation engineer, i.e. Field Instrument (Transmitter, Control and On Off Valves, Gauges and Fire and Gas devices, Analyzer, etc.) Specification, Requisition, Technical Bid Evaluation, Datasheet and Calculation. Instrumentation design review for Package Vendor Equipment (i.e. Gas Turbine Generator, Gas Turbine Compressor, Steam turbine Generator, Waste Heat Boiler, Thermal Oxidizer, Water Treatment Package, Flare Ignition Package, HVAC, etc.). Conversant with International Codes and Standard such as ASME/ANSI, API, ATEX, ISA, ISO, IEC, AGA, GPA, NEC, NFPA, ITU and other international codes and standards applicable for Instrumentation & Control System design used in Refinery, Petrochemical, and Oil and Gas Industry. Deep understanding of Hazardous area classification and protection method. Have good coordination and communication with other disciplines as Engineer and Lead Engineer. Experience on construction, pre-commissioning, and commissioning phases, review Material Handling Facilities, Methodology and Requirements for Fabrication, Installations and Operation where applicable

Engineer, Manager, Superintendent

ID
Available
AHMAD FARIDZUAN BIN C.

AHMAD FARIDZUAN BIN C.

$75/daySenior

Graduated from Universiti Teknologi Malaysia (UTM). Multi-tasking persons and well experience in designing of front end engineering for Fire Fighting System, Life Saving Appliances - Lifeboat& Davit, Liferaft, Material Handling Equipment, Lifting, Rigging, & Handling, Electrical Distribution System, Piping & Instrumentation System for the Offshore Platform Oil & Gas Greenfield & Brownfield Project in Malaysia (Peninsular, Sarawak, & Sabah). Field Service Representative Engineer for the company to most of the Offshore Platform in Malaysia. Always willing to learn a new chapter and cooperate with a new team member by sharing the experiences and generate a new ideas. Intend to create an opportunity to level up the value added.

Engineer, Manager, Drafter / Designer

MY
Available
Mohd Rizal N.

Mohd Rizal N.

$200/daySpecialist

* A focused and diligent Instrument and Telecommunication Engineer with broad experience in oil & gas, marine, power plant and commercial building. * Well experienced in (Invitation to Bid) ITB process cycle, Technical Clarification, Technical Bid Evaluation, proposal preparation, telecommunication system design and engineering, project execution and commissioning. * Quick and thorough learner, leadership, sense of responsibility and ownership, creative and resourceful

Engineer

MY
Available
Tan Yen S.

Tan Yen S.

MYR 400/dayJunior

Versatile Project & Process Engineer with over 4.5 years experience in chemical industry. Skilled in chemical process engineering, process improvement, and project management. My understanding in piping, mechanical, E&I, control (PLC) enables me to work independently or as a part of a team to deliver quality projects on time and within budget. Seeking a new opportunity in project or process engineering to apply skills and contribute effectively.

Engineer

MY
Available
Lalit B.

Lalit B.

$400/daySenior

Asset Integrity management operations and sales professional with nearly 9 years of experience in Oil & Gas sector in field inspection surveys, projects, operations, engineering assessments and product development. Thorough with various standards & codes relevant to midstream industry such as API, ASME, NACE, DNV.  Technical Consultant for ESTN Private Limited, responsible for performing engineering assessments on multiple inspection data sets including Intelligent Pigging, NDT, CIPS Survey, ACVG & DCVG Surveys, project & field operations management for ESTN's business partners. Field assessment on in-situ basis and identifying requisite inspection program, raw data management and budget estimation.  Project Coordinator for research and development of inline inspection tool at Transpipe Integrity Solutions, Vadodara. Managed a team of 12 research engineers working on mechanical fabrication, electronics, hardware testing, software development and overall testing. Developed statistical models and linear equations for data plotting and feature sizing. Successfully piloted the interface of individual components and commercialization of technology.  Worked as Engineer for Intelligent Inline Inspection Operations & Maintenance at T D Williamson, India. Responsible for inspection tool preparation, logistics management, pipeline (asset) readiness for inspection activity, tool box talk, conducting inspection survey, GIS Mapping, data collection & preliminary verification of data quality on P6, Go-NoGo reporting, report handover and post inspection defect verification. Successfully completed on job specialized training and certification as ASNT ILI PQ-2010 Level 1 Tool Operator for MFL & XYZ Technology from T. D. Williamson, Swindon, United Kingdom.  Worked as Instrument & Control Engineer at Coke Handling Plant at IOCL, Gujarat Refinery, Vadodara through Super Shutdown (Thyssenkrupp); directly responsible for safe operations, RCM implementation, maintenance support by managing a team of 15 Technicians and 10 Operators.

Engineer

IN
Available
Bambang Tri  W.

Bambang Tri W.

$118/dayLead

Hello, my name is Bambang Tri Wahyudi, and I work as the OHS Assistant Manager for Karadeniz Holding. My current project involves managing and maintaining Karpowership, a marine vessel power plant. As a health and safety industry professional with 15 years of experience, I am fully capable of providing expert guidance on the H&S Management System for both management and staff. I am confident in my abilities to lead the Health and Safety Department for any project or ongoing business process. My areas of expertise include oil and gas operations, mining, chemical manufacturing, and marine vessel power plants.

Superintendent, Manager, Supervisor / Technician

ID
Available
Daniel I.

Daniel I.

$200/daySenior

Targeting new heights of success with integrity, hard work and dedication , and leaving a mark of excellence on every step with a company providing continuous learning and development opportunities in a fast-paced and continually evolving environment.

Engineer, Supervisor / Technician, Inspector

NG
Available
Wasay M.

Wasay M.

$350/daySenior

Senior Process Engineer with more than 10+ years of enriched Process Engineering experience in EPC Design and Plant technical services. Expertise in developing and utilizing process engineering and Plant monitoring tools for optimization and troubleshooting of Plant Operations. Well versed in using Process Engineering software and international standards for Design & execution of mega EPC projects

Engineer, Superintendent

SA
Available
Salah A.

Salah A.

$360/daySenior

Rotating Equipment Engineer / QC Inspector with more than Five Years experience in the field of oil and gas industry, working as a part of EPC scope, going through all project phases form Equipment Selection in the engineering phase till equipment start-up at site. I have developed a passion for becoming a Machinery Engineer with a strong skillset and expertise. I am committed to constantly enhancing my knowledge and skills, and I actively seek out new opportunities to do so.

Engineer, Inspector

EG
Available
VASISHTA KUMAR REDDY V.

VASISHTA KUMAR REDDY V.

$450/daySpecialist

I amassed 16+ years of experience in Oil & Gas industry (Both Exploration & Refinery Business) out of which 10+ Years of FPSO (Offshore) and 5 Years of Refinery FCCU, Gas Processing, Treatment, MEROX Treaters experience with 5 Commissioning Projects and 3 Annual Shutdown Projects.   Worked at various positions for 3 Indian Leading Oil & Gas Companies in which i am pivotal in various commissioning, revamping and annual turnaround projects. Commissioned India's first Ultra-Deepwater Gas Projects R-Cluster, Satellite Cluster and MJ Fields Production.   As a Production Supervisor , Experienced and led all phases of FPSO RUBY Project i.e from FAT, Hull & Topside Modules erection, Yard Commissioning, Sea Trails, Sailing, Subsea Hookup, STP buoy connection, Offshore Commissioning and RFHC, 72 Hrs Performance Test to Steady State Operations phase. Commissioned 1 FPSO, 1 Onshore Gas Plant, 2 Refinery FCCU Projects successfully. Handled 2 Refinery Turnarounds and Revamping Projects and 1 Onshore Gas plant modification Project.   Adept in Subsea Facilities Commissioning and Well Head Operations, Gas Treatment & Processing, Gas Compression, FCCU Operations and MEROX Treaters. Played a key role in Reviewing and Implementing ICSS & ESD Control Systems successfully for FPSO Ruby and Onshore Gas Plant Projects. 

Engineer, Manager, Supervisor / Technician, Superintendent

IN
Available
Alexandre B.

Alexandre B.

€650/dayLead

Chef de projets Construction ENR – 10 ans d'expérience

FR
Available
Selva Prakash R.

Selva Prakash R.

$700/daySpecialist

Selva Prakash has 30 years Safety, Risk, HSE & Asset Integrity experience, mostly oil & gas operations and projects, in Malaysia, Singapore, Myanmar, Brunei, Indonesia, UAE, Qatar and India. He is familiar with HSSE and Technical Safety Standards, Codes and Practices such as API, ASME, NFPA and Industry Best Practices in PETRONAS, Shell, QatarEnergy. He has the worldwide multi cultural experience and has proven capabilities on FEED, Basic Design, Detailed Design, Commissioning and O&M roles. Selva is a technical HSE lead on major oil, gas and chemical projects. He is an experienced practitioner of risk assessment/risk reduction techniques and also experienced in closure demonstration of residual risk acceptance for major projects and leading organizations. He has shown effective HSE implementation in facilities design, construction, installation, commissioning and operation. Selva is currently providing risk consultancy, specializing in technical HSE for oil and gas major hazard assessment and investigative studies. Selva is a highly motivated and result-oriented person, who has a successful career track record as a best fit person to hold senior positions in any challenging project as Principal (Safety & Risk) and/or Head of Department of EHSQ for Onshore and Offshore Operations, Construction Safety, Process Safety, Fire Safety, Risk Management, Asset Management, Operations & Maintenance, Asset Integrity Assurance, Sustainability & Climate Change Initiatives (CCS/H2/low-carbon energy).

Engineer, Inspector, Manager, Supervisor / Technician

MY
Available
Sathaniswarman R.

Sathaniswarman R.

MYR 400/dayJunior

Mechanical Engineering Ph.D candidate specializing in nanotechnology seeking to apply expertise on the industry level

Engineer, Drafter / Designer

MY