Completion freelance

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

Bachelor's degree in Mechatronics Engineering with 14 years of extensive experience in project management across various organizational levels and portfolios. Expertise includes sub-contractor management, client interactions, and adaptability to diverse working environments. Proficient in navigating management setups, contract execution strategies, and project-specific requirements. Well-versed in government and local regulations, client-specific standards, and international best practices (DEP, ASME, API), as well as design and operational codes/standards. Demonstrated ability to effectively oversee and managing project budgets and funds, with a strong foundation in contract management and procurement.

Manager

I am a Bachelor of Science in Instrumentation and Control Engineering graduate from Batangas State University, Philippines batch March 2004. My 16+ years experience in the Power Generation (Renewable-Binary Geothermal), O&G, Sulphur Granulation / Storage / Shiploading, Petrochemical, Water Desalination, and Construction/Commissioning/Maintenance Industry has provided me with the opportunity to enhance my overall knowledge of a variety of facets and the workflows in Engineering, Construction, Completions/Commissioning, Maintenance, and Operations. Being a versatile Instrument Engineer is the key to any successful and safely executed project and working in challenging environments has provided me a unique understanding of the requirements necessary to deliver great results in a safe productive manner. 

Engineer, Inspector, Supervisor / Technician

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

    I am a young, energetic, well-motivated professional. I have excellent Technical skill and believe in participatory learning process and approach. I can maintain the technical matters relating to Mechanical, Civil, hydraulic and Industrial mechanics. I have done my work with Saudi Aramco & Dar Petroleum. I am having ability to function in a multicultural environment, to lead and motivate multinational teams and familiarity with cost management processes.  Assuring of my best services at all 

Inspector, Engineer, Supervisor / Technician

Hi, I’m Mohamed. Fifteen years of experience in Petrophysics, Geological Operations, and Geological Studies. Seeking a Job opportunity in a well-established company with an environment that will challenge and enhance professionally both my knowledge and work experience in petroleum engineering.

Engineer, Other, Supervisor / Technician

15 years of experience in Drilling, Completion, Workover & Rigless Wellwork. Technical expertise in drilling & completion operations using  jack up rig, hydraulic/conventional workover, tender (barge) assisted platform rig onshore land rig. Drilled ERD wells, infill, development, appraisal wells and in H2S (Sour) environment. Sandstone and carbonates reservoirs. Drilled tight margin wells with MPD technique. ExxonMobil trained in Fast Drill Borehole Management, Flat Time Reduction (FTR) process & trained in long reach ERD wells. Exp in offshore Southeast Asia, Caspian Sea (Turkmenistan) and onshore Middle East (Abu Dhabi, Sharjah). Driller with competent knowledge in well completion design & well intervention.

Manager, Engineer, Superintendent

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

Project Document Management professional with 20 years of experience with Oil & Gas, LNG, EPC, FPSO, Construction, Mining and Industrial Engineering. As working for Client and PM /CM organization I am responsible for Developing, Creation and implementation of Documents management system Procedure and Process on projects / Organizations. Using Different Electronic Document Management System (EDMS) Application like Aconex, Share Point, and Primavera Contract Management Creation of Automated Workflow as per project Contractual Communication Protocol. Provide Documents Management Training to Internal and external stake holders of Project / Organization. Hiring and Managing Document Management Team on Projects. Ensure all stake holders compliance with implemented Document Management Procedure and smooth collaboration within Internal stake holders. Conducted External Audit with Quality team as per ISO 9001:2015 Standards.

Manager, Supervisor / Technician, Inspector, Engineer

PROFILE Experienced Mechanical Completion (Subsea) & QC Welding/Insulations with certification from TWI & ICorr. Exhibits strong attention to detail in inspecting weld qualities (Boiler, Jacket & Topside structure), subsea equipment & cryogenic insulations. Currently pursuing part time Bachelor of Engineering Technology Welding Quality & Inspection with over 12 years of practical experience. Known as a self-driven and practical professional with solid multitasking capabilities. Demonstrated an unwavering commitment towards delivering exceptional technical standards and driving the organizations to greater heights.

Engineer

I'm a dedicated individual with almost 2 years experience as a Service Engineer, and I'm waiting for my Paper 1 & Paper 4 Safety Officer Examination by NIOSH

Engineer

Vast experience in Construction and commissioning in oil and gas platforms and FPSO in Malaysia and abroad especially for Brownfield and greenfield projects.

Engineer, Superintendent, Manager

My name is Ekni Han Bin Abd Rahman. I am a multi discipline Professional. I have been involved for over 20 years in oil and gas industries consist of  1. Onshore LNG Process facilities , 2. Offshore process & utilities facilities at ( Platform /Island /FPSO/MOPU ) 3. EPC companies. General Key abilities : · Energetic work ethic and detail-oriented. · Motivates Team members. · Able to Supervise , manage & Coordinate works · Able to bring competitive & positive work Environment at work place. · Able to work in multicultural working environment. ·Understand the important of Communications and Team work at difference level / parties. ·To ensure task given in good progress and completed on time. · Proven Experience & expert in Coordination of Construction activities in Brownfield area. · Abilities to Lead and meet Client expectation (Time Frame) of work activities as per Instructions and target. · Specialize in monitoring and contribute information cross department during Construction Project phase , · Keep All Parties from ( Client / EPC / PMT) at the same page toward job completion Production/Operation Key Abilities · Familiar and understand work Instructions, work procedure, Permit to Work system, Fire Fighting System (Fields and Panel) and Housekeeping. · Expert of plant Operations (Panel and Fields ), Normal Operation & Troubleshooting. · A wide ranges of experiences in Pre-commissioning, Commissioning stages, Normal Operations, Start-up and Shutdown) · Provide , Coaching, Mentoring &Training (Field & DCS) for Operation team members . ·  Experience in process control & field troubleshooting.      

Supervisor / Technician, Other

A Professional Engineer with more than twenty-five (25) years of experience in various phase of mechanical /piping scope of works. Involved in FEED, Detail Design (fluent with design software, i.e. PDMS and Caesar II), planning, contracting, tender bid evaluation, procurement, fabrication, construction, commissioning and project management scope of work within Petrochemical Plant, Upstream Oil & Gas, FPSO, Power Plant and Pulp/Paper Plant. More than 15 years in engineering and 10 years in project /construction management. Familiar with international standard

Are you looking for a certified and experienced QA/QC Electrical & Instrument Inspector for your oil & gas or industrial project? I am Al Fuzail, a certified professional with over 5 years of experience in inspection, testing, and compliance in hazardous areas (Ex/EEHA) for major international projects including Qatar Gas and Santos (Barossa). 🔧 My services include: * Electrical and Instrumentation (E&I) inspections * Hazardous Area (Ex) inspections – IEC 60079-17 * EEHA (Electrical Equipment in Hazardous Area) audits * Punch list verification & system completions * Telecom & control panel inspections * As-built documentation and QA/QC reports * AutoCAD drawing reviews * Remote or site-based support 🎓 Certifications: * CompEx 01-04 (2024–2029) * E&I Inspector (Global Pro International) * Hazardous Location Inspection * Bachelor in Electrical Engineering 📍 Based in Indonesia – Available for on-site assignments globally or remote review/documentation tasks. Let's ensure your electrical and instrumentation systems meet global safety and quality standards. Message me today to discuss your project needs!

Inspector, Supervisor / Technician

HSE Professional with more than 20 years of experience in Health, Safety & Environment with various industry. Demonstrated excellent HSE Culture, behaviour, leadership and commitment in achievement of Company’s HSE Objective and Vision. 4+ Years of experience in Refinery & Petrochemical Development Project (RAPID) in the Engineering, Procurement, Construction & Commissioning of Ethylene Oxide & Ethylene Glycol (EO&EG) Plant and including with the Construction of Contractor Based Facilities. 9+ Years with multi experience in the Construction, Fabrication, Commissioning, Maintenance and Load Out for Topside, Jacket, Turret Block, Self Erecting Drilling Barge including Life Extension and Refurbishment of FPSO and FSO Project. 1+ Years of experience in Ready Mix Concrete Industries to supply and distribute to Pengerang Deep Water Jetty and Pengerang Deep Water Terminal. 6+ Year of experience in Port Service comprising of Marine, Logistics, Maintenance, Warehousing and Transportation.

Supervisor / Technician, Inspector, Other

Civil/Structure Engineer with 10+ years of experience designing and managing projects for a variety of clients from FEED stage, DED stage, construction stage, pre-commissioning stage, until mechanical completion. Skilled in leading teams and resolving technical issues. Create a positive and productive work environment by communicating with team members and interdisciplinary to mitigate potential concerns.   Provide structural analysis following design basis such as structural building, non-structural building, or non-structural component building and designed in accordance with codes or specifications. In charge of developing and preparing general specifications and construction specifications for civil structures and buildings. Generate the engineering concept, work volume breakdown, specification, and schedule during the FEED (Front End Engineering Design) stage.   Review Material Approval Request proposed by subcontractor to meet general and construction specifications, including following up on the delivery schedule of material. Assist the proposal team with requests for quotations for commercial purposes. Coordinate and identify technical queries, deviations, and alternatives to be submitted by the subcontractor. Prepare and coordinate with the QC Department for the ITR or inspection check list. Perform functional tests of indoor firefighting systems, for instance, one of the completion requirements before handover to the client

Engineer

Accomplished Senior Instrumentation and Control Systems Engineer with over 15 years of experience executing and leading diverse EPC projects, including, Oil & Gas, Water Treatment Facilities, and Infrastructure projects. Skilled in translating project strategies into detailed execution plans, and procedures. Demonstrated leadership abilities in delivering small-scale to large-scale projects domestically and internationally. Expertise spans proposal, execution, automation, control, analyzer, and fiscal metering systems

Engineer

Motivated and dedicated Drilling & Completions Superintendent with over 30 years of experience in the oil and gas industry, specializing in offshore drilling operations, well completion design, and high-pressure/high-temperature (HPHT) drilling. Known for strong leadership, teamwork, and communication skills, I have a proven track record in overseeing complex drilling operations and managing multidisciplinary teams to ensure safety, efficiency, and regulatory compliance. Highly goal-oriented, I consistently drive collaboration to achieve high-performance outcomes and am adept at executing challenging drilling programs, including extended reach drilling (ERD), managed pressure drilling (MPD), and managed pressure cementing (MPC). With expertise in overseeing 24/7 drilling operations, I bring hands-on experience and technical depth to lead projects, optimize drilling designs, and drive operational excellence across diverse technical domains and global partnerships.   My role required seamless integration of engineering principles with operational decision-making to address technical challenges, optimize performance, and maintain well integrity across all phases of well delivery. This included collaboration with multidisciplinary teams, service partners, and regulatory bodies to ensure the highest standards of safety and operational efficiency.   Extensive experience collaborating with the Malaysia-Thailand Joint Authority (MTJA) for Block A18 during my tenure with Carigali Hess, along with significant engagement with shareholders Hess and Petronas Carigali (PCJDA). Additionally, I have a strong background in adhering to MPM guidelines and regulations during operations in the Hess North Malay Basin (NMB)   I possess a strong understanding of safety, progress, and cost monitoring, along with the critical importance of effective communication among all stakeholders to ensure projects are completed successfully, safely, and efficiently. My training in the Offshore Drilling Industry has enabled me to combine technical expertise with practical rig experience, developing engineering and operational skills that consistently deliver practical and effective solutions.

Superintendent

In my over 30+ years’ experience in the Oil & Gas, Petrochemical and Marine fabrication / construction industry (mainly in the UAE) my knowledge of fabrication / construction in onshore greenfield / brownfield development as well as offshore arena is extensive and I pride myself with my technical know-how that includes welding engineering / quality control / design engineering and construction engineering.

Manager

Energy, Oil & Gas, PV, CSP, Power Plant & Mega Projects Management ● Highly analytical project manager with excellent Mech, Elec, I&C engineering professionalism with broad experience managing overall of Mega Projects such as : power plant EPC & commissioning, installation, maintenance & operations within the Energy, Oil & Gas industry. ● Track record of leading large-scale projects from initial planning to final handover within timely and budgetary constraints. Excel at building professional relations with project teams, peers and Key stakeholders , customers, state & regulatory offices, and to ensure achievement of project objectives. ● Proven ability to maintain All safety, Health and Environment laws and regulations, quality of work, versus speed, and cost in accordance with pre-defined company requirements with a focus on improving operational efficiency internationally . ● Privately owned business: "GHnery SP"- professional support and consulting services within the Power Energy sector and Mega Projects – Energy Renewables: PV- Solar, wind, Thermo-solar, Combined cycle/Co-generation Turbo generators Gas & Steam turbines , power plant BOP engineering.

Engineer, Inspector, Manager, Superintendent

Since 2018 In Oil & Gas Industries: 5 years experienced in EPCC / EPCIC. 1. Baram Bravo Reinstatement Project HUC EPCIC 2. Baram South Redevelopment Project HUC EPCIC 3. Bokor-A Make Safe Project HUC EPCC 4. Bokor BODP-E Bokor phase 3 Preservation HUC EPCC 5. SK408W Jerun Development Project EPCIC 6. Tennet 2G Programme Ijmuiden Ver Alpha Offshore Wind Farm EPC 7. Integrated Bekok Oil: Tiong-A, Bekok-A, Bekok-AA, Bekok-BB & Bekok-C Execution HUC EPCIC 8. Module 9 for Integrated Bekok Oil Project PCC

Engineer

A Quality Management Professional with extensive experience typically in the capacity of a Quality Manager, employed by Owner Operator or Main Contractor, Originating Full QMS Quality Management Systems & Documentation (Design & Write QMS plans, procedures, ITP, related data record formats, etc.), Leading Audit program, Managing QA department and QC team, including associated planning, recruitment, training, logistics, budget and Safety. Predominant Industry experience has been on Energy, Oil & Gas Projects involving Offshore assets (Subsea Pipelines and equipment, Jackets, MSF, Topsides, Semi-Submersibles, etc.), Onshore Installations; (Refineries [inc. major shut-downs], Cross Country Pipelines [inc. compressor, metering and distribution stations] and Power Plant) and Manufacturing (subsea equipment, pipe, fittings, etc.). Assignments have included all Project Phases EPCIC (engineering, procurement, manufacturing & assembly, construction, load-out, transportation, Installation, modification, hook-up, commissioning and survey), covering all Disciplines (pipeline, civil, structural steelwork, mechanical, piping, electrical, instrumentation, control, coating, insulation, etc.).

Manager