Hire the best freelancers in corrosion for your project
Asset Integrity Management EMAS Asset Integrity Management · Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. · Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. · Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. · Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. · Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells · Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. · Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project · Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. · Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster · Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster · Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster · Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc. Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) · Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK · Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster · Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 · Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster · Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. · Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period. Safety & Constructability Review Studies Drop Object Protection – KND Platform · Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster · Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines · Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster · Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex · Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. · Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster · Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) · Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification. Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: · Conducted Pre-Project Kick-Off Meeting activities, including: · Defining the Scope of Work · Establishing the Project Schedule · Developing the Master Deliverables Register · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. · Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: · Performed Steady-State Flow Assurance Analysis using PIPESIM. · Developed the Subsea Production System Report detailing subsea configurations and system integrity. · Created the Design Basis for Process, outlining key process parameters and design considerations. · Formulated the Overall Field Development Scheme to optimize production and operational efficiency. · Developed the Brownfield Modification Report for integration with existing facilities. · Engineering Studies & Reporting: · Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. · Conducted a Concept Screening Assessment to evaluate viable development options. · Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. Feasibility Study for FB-1 Market & Commercial Analysis: · Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. · Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. · Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. · Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: · Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. · Process Safety & Design Evaluation: · HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: · Two tie-in options: MPPL or Existing WHP · Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 · Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant · Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements. BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification · Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. · Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: · Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. · Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: · Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: · Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: · Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. · Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: · Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. · Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: · Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis · Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency · Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration · Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield · Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. · Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. · Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. · Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. · Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. · System testing, commissioning, and performance verification to ensure operational readiness. · Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. · Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. · Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.
Engineer
An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks
Engineer, Manager, Other, Supervisor / Technician
Detail-oriented Mechanical Engineering graduate with 2 years of experience in the oil and gas industry, specializing in Asset Reliability, Availability, and Maintainability. Proven track record of contributing to Turnaround and Inspection teams, with hands-on involvement in asset integrity, corrosion management, and regulatory compliance. Strong technical skills, paired with a problem-solving and analytical mindset, allow for effective decision-making in fast-paced environments. Passionate about continuous learning and eager to contribute to dynamic engineering teams that drive operational excellence.
Engineer
I'm Scientist, Pipeline and Engineering in Specialist Structure/Construction of Body with H-Beam, Plate and Weld: 1. Pipeline Engineer: Welding Engineer & Field Joint Coating 2. Mechanical Engineer in Structure of Body: Aerospace, Submarine/Naval Architect, Hangars, Storage Tank, Vessel, Over Head Cranes, Pipe Rack, Shelter, Bridge and Girder. STRENGTHS: Adaptable, Team-Player, Goal Oriented, Optimistic and Managerial Skill Achievement: I am Indonesian who first discovered the rubber coating chipped in Project Pipeline in Sumatera 370KM from Belawan / Medan to Arun / Aceh and Pipeline in Jakarta MKMT (Muara Karang-Muara Tawar) 30KM from Muara Karang to Muara Tawar coral that has never been detected / Inspection in the project pipeline conducted by PT. Pertamina (circa 1980s), caused by pipes that are already on standby in the above Weld Joint longer to be influenced by several factors such as the effect of hot weather, the cold night rain resulting in chipped rubber joints Coating
Engineer, Manager, Inspector, Superintendent
A corrosion expertise in engineering, and inspection with an advanced detail-focused associated with integrity of corrosion protection (paint/coating, insulation, cathodic protection, fireproofing, etc), developing material & metallurgical corrosion assessment and failure analysis, and comprehensive knowledge and understanding of international standard codes (NACE, DNV, SSPC, BS, ASTM, Norsok, & ISO), site execution, inspection, testing, specifications, procedures and safety codes and has practices for paint/coating, insulation & refractory operations and general site safety. Specialize in the upstream and downstream of the onshore and offshore oil and gas industries who has over 10 (ten) years of invaluable experience in both the domestic and overseas markets. Multi-faceted executive with expertise in: Quality Assurance/Control – Corrosion engineer – Performance Audits – Testing, Inspection (nondestructive & destructive) and Supervision – Monitor Specifications – P&ID, General Arrangement & Isometric Drawings – Schedule & cost control – Familiar with welding inspection – Blasting/Surface Preparation – Corrosion assessment – Internal pipe coating – Internal tank coating/ Lining coating – Concrete Coating – Field Joint Coating for Pipeline (Liquid epoxy pack, Heat Shrink Sleeve,High, Density Poly Urethane Foam) – Thermal Spray Aluminum – Pipeline coating (3 or Multiple Layer Poly Propylene / Layer Poly Ethylene, Concrete Weight Coating) – Glass Flake Lining – Rubber Lining (Vulcanized & Non-vulcanized) – Fiberglass Reinforced Plastic (FRP) – Glass Reinforced Plastic (GRP) – Passive Fire Protection (Chartek series, Jotachar, etc) – Thermal Insulation Coating (Mascoat Coating) – Cold Insulation – Hot insulation, Acoustic Insulation – Subsea & Immersion service, FPSO (Jacket and Top Module) Fabrication Yard, LNG Tank – Mineral processing plants (Smelting) – Refractory (Ceramic Fiber).
Engineer, Inspector, Superintendent
A graduated engineer of Oil and Gas Engineering at UiTM Shah Alam | Experienced in several projects related to project planning, project management, sustainability, project design, well drilling and exploration, and subsurface development | Skilled in several engineering software such as QUE$TOR, AutoCAD, MATLAB and Petrel | Skilled in several Microsoft software such as Words, Excel, Power Point, Project, Visio, and Power BI | Indulge in volunteering activities and several sports | Engaged in leadership, excellent communication, wise time-management and teamwork | Open and searching for new experiences and up to any challenges and task.
Engineer
I’m a Mechanical Engineer with 23 years of experience with a proactive mindset, a good teamwork spirit and an eagle eye for process improvement. I’m driven by efficiency of operations and functions such as project/site/operations management are my target. My core values are: discipline, accuracy, sense of urgency, resilience and teamwork.
Manager, Superintendent, Engineer, Supervisor / Technician
My previous project for the NFPS project and seasoned interface and materials lead with 16+ years of experience in EPC and Oil & Gas sectors, chemical, infrastructure, and renewable energy sector. Proven success in material and document control, warehouse and logistics, and leading cross-functional coordination between procurement, construction, engineering, QA/QC, HSE and client stakeholders. Strong familiarity with Indonesia, Gulf and global projects, including PERTAMINA and QatarEnergy LNG. I am a Mechanical Engineering graduate and ready to immediately relocate internationallyMy previous project for the NFPS project and seasoned interface and materials lead with 16+ years of experience in EPC and Oil & Gas sectors, chemical, infrastructure, and renewable energy sector. Proven success in material and document control, warehouse and logistics, and leading cross-functional coordination between procurement, construction, engineering, QA/QC, HSE and client stakeholders. Strong familiarity with Indonesia, Gulf and global projects, including PERTAMINA and QatarEnergy LNG. I am a Mechanical Engineering graduate and ready to immediately relocate internationally
Engineer, Manager, Superintendent, Inspector, Supervisor / Technician, Other
Irfan has an accumulative 26 years of experience in the oil and gas, petrochemical and refinery industry to cover some projects across Asia (Indonesia, Singapore, Malaysia, Brunei, HongKong and China), Middle East (Oman, Kuwait, UAE and Saudi Arabia), North and Central Africa (Algeria, Congo) and Latin America (Mexico, Ecuador and Suriname), with specific set of skills: 1. Surface Production Facilities: Separation technologies, Process Engineering, Gas processing and acid removal system, Flow Assurance, Chemical Treatments, Corrosion Engineering, plant and piping modification, plant performance monitoring, plant optimization and troubleshooting through the Management of Change (MOC) to the newly adopted system to ensure proper oil & gas plant operation. 2. Subsurface Engineering: Production Engineering, Production Optimization, Reservoir simulation, Well treatment, Production chemistry and Well Integrity for HPHT, sweet and sour environment. 3. Enhancement of Oil Recovery (EOR) process such: Water injection, Steam flood, CO2 and Polymer injection system 4. Refinery and Petrochemical projects (CDU, RFCC, para-xylene, Polypropylene, Polyethylene, Steam Cracker Unit, LDPE/LLDPE Unit, heavy aromatics unit, Tank Farm, Utilities). 5. Subject Matter Expert (SME) for Scale and Corrosion aspect and its related subject such: production chemistry, fluid sampling, mitigation strategy and its application. 6. Familiarity with process hazard analysis requirements, including experience of HAZOP analysis /
Manager
Organized, driven, and ambitious young professional with outstanding attention to detail and a thirst for knowledge who wants to work closely with experienced engineers and contribute to the development of a dynamic engineering company. Offering a degree in Mechanical Engineering and over 2 years of work experience in reliability and inspection department, seeking an entry-level engineer permanent position.
Engineer
A Quality Management Professional with extensive experience typically in the capacity of a Quality Manager, employed by Owner Operator or Main Contractor, Originating Full QMS Quality Management Systems & Documentation (Design & Write QMS plans, procedures, ITP, related data record formats, etc.), Leading Audit program, Managing QA department and QC team, including associated planning, recruitment, training, logistics, budget and Safety. Predominant Industry experience has been on Energy, Oil & Gas Projects involving Offshore assets (Subsea Pipelines and equipment, Jackets, MSF, Topsides, Semi-Submersibles, etc.), Onshore Installations; (Refineries [inc. major shut-downs], Cross Country Pipelines [inc. compressor, metering and distribution stations] and Power Plant) and Manufacturing (subsea equipment, pipe, fittings, etc.). Assignments have included all Project Phases EPCIC (engineering, procurement, manufacturing & assembly, construction, load-out, transportation, Installation, modification, hook-up, commissioning and survey), covering all Disciplines (pipeline, civil, structural steelwork, mechanical, piping, electrical, instrumentation, control, coating, insulation, etc.).
Manager
I m am fresh graduated from umk jeli course in geology /geoscince
Supervisor / Technician
SENIOR ENGINEER /SUPERVISOR/SUPERINTENDENT (MECHANICAL/PIPING/CONSTRUCTION/COMMISSIONING) Discipline Lead | Project Engineering Management Bachelor’s Degree in Mechanical Engineering | Executive Master in Construction Management | 20+ Years’ Experience | Oil & Gas | Offshore | EPCIC | PMC | Engineering & Operational Readiness Strategic and technically accomplished Lead/Senior Mechanical/Piping Engineer/Supervisor with over 20 years’ success in managing large-scale, multidiscipline engineering and project execution across offshore and onshore oil and gas developments. Proven expertise in mechanical and piping systems design, static and rotating equipment management, operational readiness, construction/deconstruction and commissioning/decommissioning leadership. Trusted to lead cross-functional engineering teams, enforce project controls (cost, schedule, risk), develop and manage discipline execution strategies, maintain quality and safety standards, and ensure full compliance with international codes, Owner’s specifications, and project requirements. Track record includes leading critical projects for PETRONAS, QatarEnergy, Brunei Shell Petroleum, Chevron, ExxonMobil and Shell — consistently delivering excellence in technical execution, team leadership, and stakeholder collaboration CORE COMPETENCIES Construction & Execution Leadership • Brownfield Execution & Hook-up (Onshore & Offshore) • SIMOPS / IPOP / PTW Coordination • Flange Management, Pressure Testing, System Handover • Construction Work Pack Challenge, Punchlist Management, • EPIC SOW , Method of Statement Preparation and Approvals • Equipment Fabrication & Factory Acceptance Test (FAT) • Mechanical Completion, MCC Walkdowns, PSSR, LOSH • Health and Safety Compliance Engineering & Technical Assurance • Mechanical and Piping Disciplines Engineering and Design (Pressure Vessels, Heat Exchanger, Coolers, Tank, Crane, Rotating Equipment, piping components and Valves) • Equipment Installation (GTs, Compressors, Packages, Pumps) • FEED & EPCIC Execution, Deviation Handling, Design Clarifications • Welding & Inspection (WPS, NDT, QA/QC Oversight) • Constructability Reviews, 3D Model Reviews, HAZOP/HAZID,VCA Workshop • Material/Mechanical Handling, Layout Coordination, Material Selection, Technical Requisition, Datasheets and Specifications • Engineering Calculation for Pressure Vessel / Piping Operational Readiness, Commissioning and Decommissioning • Commissioning Strategy & CSU Planning • Pre-Decommissioning / DFPV (Drain, Flushing, Purging and Vent) Coordination • Pre-Commissioning, Systemization and Completion Management System • Redlining & As-builts • Spare Parts Strategy and Preservation Project Integration & Interface Control • Multidiscipline Coordination (Civils, E&I, Pipelines) • Interface Management (Owner, Contractor, Vendors) • Risk Mitigation & Permit Systems under Live Plant Conditions
Engineer, Inspector, Supervisor / Technician, Superintendent
Result driven and detail-oriented professional with 25 years of experience in Asset Integrity, Risk Management, Quality Control, Turnaround planning and execution. Driver for change in the asset integrity department to adopt digitalization and use of artificial intelligence. Efficient team leader with a sharp focus on manpower planning and optimization, task prioritization and performance evaluation. Supervision and coordination of on-stream and Turnaround/Shutdown inspections of static equipment, pipework systems, pipelines & storage tanks. Experienced in RBA engineering and identification of damage mechanisms.
Engineer
Detail-oriented Mechanical Engineer with material selection and static-equipment integrity knowledge. Proven track record in developing and deploying corrosion-control strategies, integrity operating windows, and inspection plans for fixed equipment and piping. Compliance experience with API, ASME, ISO, ASTM, and PTS standards; skilled in data-driven optimization, cathodic protection, failure analysis, and additive-manufacturing qualification. Collaborative global team player ready to deliver proactive asset improvements.
Engineer
Degree - Executive Bachelor in Industrial Engineering Technology (Mechanical & Maintenance), Diploma in Engineering Technology in Mechanical & Maintenance with More than 23 years of OIL & GAS hands-on experience in the varies Project in oil and gas Green/Brown Field, EPCC, EPCC+I, TOPSITE, SUBSEA and Pipeline Coating and Installation. Entrusted to handle and manage important role in overall project package and organization itself. Proven capability to lead in coordinating and managing from initiation stage Engineering (Detail Engineering), Procurement, Pre-fabrication and Construction onshore, offshore installation (Hook-up and Commissioning) and Handover to operation (asset owner). Task project and operation execution, strong thinker and highly motivated. Good in communication skill, exceptional work ethics and discipline, and good understanding on organization, relationship building and HSE. Involving in Inspection Engineering Technical, Quality Control Inspection and Assurance, Coating/Painting Subsea, Pipeline and Upstream, Material Coordination and Management, Project Expediting & Procurement, Heavy Structural Fabrication Installation, Pipeline Coating and Installation, Fabrication/modification Piping and Vessel maintenance/Integrity, Hook Up/Commissioning and Logistic. Ensure all Critical inspection or activities in accordance to applicable written standard, Codes and procedure and Comply with HSE. Conversant with the International Codes and Standard (ASME / AWS /ANSI / ASNT / API / ASTM / BS / ISO Quality Procedures).
Inspector, Superintendent, Engineer, Manager, Other
I'm metallurgical student, i like to learn about material, corrosion, and inspection
Inspector, Engineer
Dear sir/Madam I am writing to apply for the position Assistant QA/QC Engineer With my background in welding,inspection And Engineering, I am confident I am the ideal candidate for this post.I have 15 years of experience in the welding industry (Tankage, Piping & structural), I have gained a solid understanding of welding and inspection processes, as well as the ability to make quick and accurate inspection decisions. I have certified welding inspector CSWIP 3.1 and ASNT Level-II (RT, PT, UT, MPT, and RFI) I am also familiar with various welding codes, such as ASME, API 650, API 653, AWS D1.1, ASME B31.3, ASME B31.1, ASME sec IX, ASME V, and understand their requirements for welding. I am also well versed in the inspection of welds for conformance to these various codes. I am a detail-oriented person who pays close attention to detail and can identify any defects or inconsistencies in welds. I have the ability to communicate effectively with welders and other personnel involved in the welding process. I am also proficient in the use of various measuring and testing equipment, such as calipers, micrometers, and hardness testers. I am confident that my knowledge, skills, and experience make me the perfect candidate for this position. I am eager to join your team and contribute to your success. Please find my resume and references attached. I look forward to hearing from you
Engineer
Total 14 years consecutive experience in the structure engineering, with variety of onshore and offshore projects in oil and gas industry. Perform structure integrity in planning, designing, inspecting and overseeing construction of building structure and facilities. Responsibility in the design operations, installation, including maintenance ensuring all aspects operation and associated process are in incompliance with project specifications and completed with planned and budget constraints
Engineer
I have over seven years of experience in the oil and gas industry and have worked across various companies with a strong focus on planning and execution of projects based on clients' requirements. In my recent successful role as freelance field engineer for the company called IronFlex sdn bhd. I led a team of 2 to deliver onsite sand sampling by installing a sand sampling system to the producing well to identify the maximum flow rate without producing sand. I am proficient with onsite sampling and testing instruments such as NIC (mercury analysis), online sand sampling, acoustic sand monitoring, sampling separators, qPCR, and Coriolis flow meters, and I have a strong track record of onsite sampling and testing for production wells. I believe my expertise in project delivery, team leadership, and problem-solving would be an asset to any offshore and onsite project.
Engineer, Inspector, Supervisor / Technician