Corrosion freelance

Innovative and results-driven engineer. Skilled in process simulation and modelling, equipment sizing and selection, plant troubleshooting. Excellent communication skills, both verbal and written, with a strong focus on safety and environmental compliance. Seeking a challenging chemical engineering position at your company that will allow me to leverage my skills and experience to drive business success and growth.

Engineer

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

BEM certified Graduate Engineer with over five years of experience in managing onshore and offshore plant maintenance projects. Experienced in planning and executing maintenance projects involving mechanical piping, structure maintenance, rotating equipment and integrating design engineering principles into execution. Strong execution exposure in SIMOPS environments, PTW controlled activities, shutdown and turnaround support and contractor supervision. Available to start immediately.

Engineer

Petroleum Engineering graduate with 2+ years of hands-on field experience in well intervention, wireline logging and coil tubing perforation across offshore platforms as a Field Engineer. Proficient in variety of well-known software for well data analysis and operational planning. Experienced in using all conveyance executing projects related to stimulation, optimizing well productivity and integrity. Able to work in fast-paced environment while maintaining technical oriented decision-making ensuring flawless operations.

Engineer

Highly experienced Quality Control Coating Inspector, Supervisor, and Engineer with over 15 years of expertise across oil & gas, renewable energy, and shipbuilding/repair projects. Proven Subject Matter Expert in coating, insulation, preservation, and passive fire protection, with hands-on experience in offshore pipelines, subsea systems, wellhead platforms, central gas processing facilities, and wind farm projects. Currently serving as Supervisor QC for the Qatar Energy NFPS 32” Offshore Pipeline Project, specializing in coating materials, inspection methodologies, and full compliance with international standards including ISO, NORSOK M-501, NACE, SSPC, and ASTM. Strong knowledge in coating material, corrosion control, coating systems, corrosion inhibitors, and working knowledge of welding processes. Demonstrated capability in developing and reviewing coating procedures, inspection & test plans (ITP), execution plans, and method statements. Known for analytical problem-solving, high safety awareness, and the ability to work effectively both independently and within multidisciplinary teams to deliver high-quality, standards-compliant project outcomes.

Inspector, Superintendent, Supervisor / Technician, Engineer, Manager

  Professional Engineer, with over 18 years of experience across upstream, downstream, LNG, and FPSO projects, specializing in FEED and EPCC execution. Proven expertise in piping design, mechanical packages, static equipment, and critical valve troubleshooting, with strong knowledge of ASME, API, BS EN, and operator standards including Shell DEP, PETRONAS PTS, ExxonMobil GP, and SAES. Demonstrated leadership in delivering complex projects such as MLNG plant upgrades, RAPID P7 Polypropylene, and BCOT system enhancements, managing multidisciplinary teams, and mentoring engineers to achieve technical excellence. Skilled in corrosion and reliability management, risk mitigation (HAZOP/HAZID), mechanical installation, commissioning, and project optimization, consistently delivering safe, compliant, and cost-effective solutions while generating significant operational and commercial value.

Engineer, Manager

Senior Maintenance Supervisor with 19+ years of experience in EPC, PMC, and owner-side projects across LNG, oil & gas production, pipelines, and industrial processing facilities. Proven expertise in Mechanical, Electrical, and Instrumentation (MEI) maintenance, midstream asset management, and cross-phase project execution from Project initiation through Commissioning to Operations. Skilled in Operations Readiness Plan (ORP) preparation, preventive/predictive/corrective maintenance, maintenance procedure development, RCA facilitation, CMMS/SAP PM execution, and reliability KPI improvement (MTBF, MTTR, downtime reduction). Demonstrated ability to build competent operational teams, coach personnel for government-mandated certifications, enforce HSE compliance (PTW, LOTO, SIMOPS), and deliver safe, reliable, and cost-efficient gas & condensate operations.

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

Passionate and disciplined engineer with a degree in mechanical engineering with involvement in mechanical field role(s) incl. engineering design, inspection, and asset integrity.

Engineer, Inspector, Other

Senior Asset Integrity Engineer (Mechanical) with extensive experience in Asset Verification (AV), Safety Critical Element (SCE) identification, Site-Specific Performance Standard (SSPS) development, and Equipment Criticality Assessments (ECA), alongside with the application of Equipment Reliability Strategy (ERS) methodologies (EDM, FMEA, RCM). Strong background in mechanical integrity, inspection, and maintenance planning, with a focus on optimizing preventive and corrective maintenance strategies based on the prior roles with the 3rd party company. Recognized for delivering high-quality outcomes, leading multidisciplinary teams, and supporting large-scale integrity and reliability programs across onshore, offshore, petrochemical, refinery and gas processing facilities.

Engineer

Remote Intervention Engineer with over 12 years of experience in the subsea industry, specializing in the seamless integration of complex subsea hardware and offshore installation operations. Expertise on ROV, Subsea intervention, SPS Connectors (FMC, Aker, OneSubea, etc.)

Engineer

Seeking a position to utilize my skills and experience in Engineering, Inspection& Quality Department while being resourceful, innovative, and flexible. A Competent Inspector with17 years of experience in Quality Assurance, Quality control of Mechanical Inspection including Welding, piping, NDT,painting, pipeline, storage tanks, and subsea structural offshore jackets,topside,bridges, structural, PDM decks,pipelaying vessel, wind farm projects, onshore NGL, refinery plant, BAB gas plant Keen understanding of the formalities and implementation of Quality Systems in the fabrication, Oil fields and excellent skills in complying with the norms of Regulatory Authorities in welding related line. And familiar fabrication process in onshore &offshore field.

Inspector, Engineer

permitting , project budget , tendering process, kick off , construction ,commissioning ,final fit out, handover , warranty defect , start up , operations ,maintenance , turnaround and shutdown

Manager, Superintendent, Engineer, Inspector, Other

Petroleum Engineer with solid experience in oil and gas operations, specializing in field execution, well testing support, and operational efficiency.

Engineer, Manager, Supervisor / Technician

Energy engineer and independent consultant specializing in reservoir, production, and integrated asset modeling for oil & gas and energy transition projects. I help operators improve well performance, reduce operational risk, and make decision-grade technical and economic choices using rigorous engineering analysis. Experienced across subsurface, production, facilities, and reliability workflows, with a focus on practical solutions that translate engineering insight into measurable cash-flow and efficiency improvements.

Engineer

I'm familiar with Blasting and Painting, Insulation, Passive Fire Protection, Thermal Spray Coating and Pipes Coatings.

Inspector, Manager, Other