Estimation freelance

Responsible for participating in the design, preparation and checking of construction plans, site investigations, cost estimates, specifications and report for the construction of improvement projects including slope rectification, storm water and drainage improvements; supervising and assisting in project planning, design and contract administration.

Engineer

Seasoned Senior Instrumentation and Control Engineer with more than 11 years in the oil and gas as well as EPCIC sectors. Focused on field instrumentation, comprehensive engineering, SPI (INTOOLS), on-site commissioning, and vendor interaction. Demonstrated success in producing technical documentation, engineering outputs, and site assistance for both onshore and offshore projects. Acquainted with global standards such as ISA, IEC, API, ANSI, and ASME. Aiming for Sr Instrument/Instrument Engineer roles

Engineer

Civil Engineer with around 8 years of experience in construction, infrastructure, project planning, and site supervision. Experienced in Primavera P6 scheduling, progress monitoring, quality control, technical coordination, and housing/infrastructure projects. Currently working with Sindh People’s Housing for Flood Affectees (SPHF) on large-scale rehabilitation and construction projects. Open to international opportunities and relocation worldwide.

Engineer, Inspector, Other, Superintendent, Manager

lectrical Engineer with 7 years of experience in power generation and petrochemical industries, specializing in high-voltage system maintenance, outage management, and EI&C engineering. Currently working as Outage Engineer – EI&C at PT Paiton Operation & Maintenance Indonesia, managing outage planning and execution for three coal-fired power plant units (>1,300 MW combined). Previously at PT Asahimas Chemical for nearly 6 years, handling HV/MV maintenance, large-scale MCC and switchgear replacement, transformer commissioning up to 80 MVA, and CAPEX project management. Technical expertise covers protection relay coordination, transformer diagnostics (DGA, SFRA, Tan Delta), GIS and switchgear maintenance, induction motor overhaul, ETAP power system analysis, and UPS/EDEG systems. Familiar with IEC and IEEE standards, hazardous area classification, and CMMS tools (SAP, Maximo). Certified Internal Energy Auditor (BNSP). Available for remote or on-site consultancy in power plant O&M, outage management, electrical maintenance planning, and technical advisory for energy and EPC projects.

Engineer, Supervisor / Technician

I am having exposure and experience in project and construction management of large EPCIC for offshore structure facilities as being employed by the contractors and clients.

Engineer, Manager

I am currently seeking new opportunities and would like to express my interest in engineering roles such as Senior Project Engineer/Project Engineer/Construction Engineer,within the oil and gas sector, particularly in upstream or downstream projects. With over 14 years of experience leading multidisciplinary projects and a Bachelor’s degree in Electrical Engineering, I bring a strong technical foundation and proven leadership across domains including Process, Mechanical, Instrumentation, Process Safety, Civil, and Structural. My career has spanned the full project lifecycle from Front-End Loading (FEL) studies to construction and commissioning (EPCC) with a consistent focus on safety, quality, and timely delivery. 

Engineer

EPCC OF 800 KW POWER + 1400 KW COOLING CAPACITY COGENERATION FACILITY Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 12 million Duration: May 2022 – Oct 2023 * Led turnkey EPCC execution of an integrated cogeneration system comprising 800 kW Capstone microturbine, 1,400 kW absorption chiller, cooling tower, and auxiliary systems. * Directed end-to-end project lifecycle from concept, detailed engineering, procurement, construction, to commissioning. * Achieved regulatory approvals from BOMBA, DOE, and MDPT with zero re-submissions — first-pass compliance on all technical dossiers and safety submissions. * Delivered mechanical completion and system commissioning 3 weeks ahead of schedule, with zero punch list on client handover. * Integrated SCADA and power management systems across thermal, electrical, and chilled water assets with full load synchronization. SCADA SYSTEM MODIFICATION & OPTIMIZATION – 1MW CAPSTONE MICROTURBINE Client: KURZ Production Sdn Bhd Role: Project Manager Value: RM 1.7 million Duration: May 2022 – Oct 2023 * Engineered a full PLC/SCADA revamp for 1MW Capstone C1000S microturbine integrated with solar PV, thermal oil heater, and plant-wide MSBs. * Implemented advanced logic for fault detection, dynamic load balancing, and power prioritization across multi-source energy systems. * Optimized system sequencing for microturbine and auxiliary operations, improving thermal-electrical efficiency by over 15%. * Achieved system commissioning and performance validation within 2 weeks, including HMI development and I/O mapping across redundant PLC networks. PETRONAS RAPID – ALLOY PIPING FABRICATION & INSTALLATION Client: OUIJV Role: Project Manager Value: RM 8 million Duration: Sep 2016 – Jan 2018 * Managed fabrication, logistics, and installation of over 100,000 Dia-inch of high-alloy piping (Inconel, Duplex SS) to ASME B31.3 and client specifications. * Led full QA/QC regime including RT, UT, PMI, and hydrotesting, achieving 100% client acceptance on first inspection. * Coordinated construction interfaces with civil, structural, and mechanical contractors in live plant environments. * Delivered project on schedule with zero NCRs and full compliance with Petronas and DOSH standards. OFFSHORE HOOK-UP & FLOWLINE INSTALLATION – DANA PLATFORM Client: PCPP Operating Company Role: Senior Project Engineer Value: RM 1 million Duration: Jan 2009 – 2012 * Executed offshore hook-up, spool fabrication, and installation works for flowline and topside piping under PETRONAS and PTS specifications. * Maintained 100% LTI-free record throughout offshore campaign. * Successfully secured two follow-up contracts: * D2 Flow Line Replacement * 6” Piper Valve Service Order * Oversaw cross-discipline coordination (piping, structural, E&I) ensuring seamless interface and “first-time-right” installation during shutdown window.

Manager, Engineer

My personality is trustworthy, honest, high integrity, open minded, energetics, agile, responsible, adaptable, humorous, smart and fast learner. And my orientations are targets, benefits, outputs, outcomes and impacts for company by best quality and on time, firm but have empathetic. I love to expand my experiences by new challenge, although I have been involved in Constructions Project Management for more than 18 years, especially construction management and civil works, both in integrated buildings including MEP (Mechanical Electrical and Plumbing), as well as infrastructures, water resources and special constructions such as hospitals, SUTT, offshore radar towers, reclamation and dredging. I also have experiences for 12 years as Management Consultant for Constructions in projects related to the Indonesian government, private companies, NGOs, Grant and Loan Programs by IBRD, OECF, IDA Credit, ADB, JICA/JBIC, AusAID, etc. I can carry out in all projects process from planning/preconstruction to completed (PHO and FHO), like as the bidding process, proposals, work methods, negotiations and/or auctions, budgeting, scheduling, implementation, construction, cost control, quality control and assurance, rescheduling, equipment and man power analysis, contract changes orders, variation orders, and others activities to completed the project implementation. My main frames to implementation the projects are CTQ-HSSE (Cost, Time Schedule, Quality - Health Safety Security and Environments). Tools of CTQ that are Methods of Work, Permits to Work (PTW), site inspection, defects list, punch list, weekly meeting, and others. Tools control of HSSE that are Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA), Site Supervision, Tool box meetings (TBM), Safety morning, etc. Important things to support the implementation of CTQ-HSSE are Quality Management System (QMS) and Standard Operating Procedure (SOP). By the references standard are : ISO 9001, ISO 14001, OHSAS 18001 or ISO 45001 and SMK3. The main literature to run projects are PMBOK and others to Define, Plan, Organized, Action, Control and Close up (D'POAC-C) supported by RCSA to deal with risks, SWOT analysis for problem solving, and HIRA for Health Safety Security and Environments assurance. While the software and computer programs that I use are Microsoft Project, Microsoft Office (Excel, Power point, Word, Outlook, etc.), supported by other engineering software such as AutoCad, SketchUp, SAP2000, Etabs, etc. And now, I am looking for a new opportunity to do my best at a right company, as General Manager Construction, Project Manager, Construction Manager, Engineering Manager, Project Plan and Control, or equivalent, at anywhere.

Engineer, Manager, Superintendent

Marine Professional with more than 20 years experience in Ship Management, Shipbuilding and Ship Surveying. Area of specialization: Shipbuilding - New Construction project management. Marine survey - Class survey, Pre Purchase, Condition Survey, etc. ISM/ISPS/ML Audit - Audit and document review. Ship Management - Shore based ship operation, procurement, shore repair, dry docking, etc.

Engineer, Manager, Superintendent

A process engineer with strong experience in process unit monitoring, dynamic simulation, and plant optimization. Proven ability to analyze and improve process performance through advanced engineering studies including blowdown adequacy, slug flow, compressor surge, and flow assurance at Synergy Engineering and East One Zero One. Skilled in PSV, pump, and line sizing, with design contributions to Water Injection Facilities, FPUs, and Mercury Removal Units. Proficient in Aspen HYSYS, UniSim, OLGA, and Pipenet for evaluating unit performance, energy utilization, and material balances. Currently, researching on the economic feasibility of CCU processes which requires the application of knowledge on heterogeneous reaction, adsorption and process economics.

Engineer

I am a highly experienced Petrophysicist and Reservoir Characterization Specialist with more than 35 years of international experience supporting exploration, appraisal, development, and mature field projects. Having worked with operators, service companies, laboratories, and consulting organizations across multiple countries, I bring a practical, integrated approach to solving complex subsurface challenges. My expertise spans petrophysical evaluation, clastics, shaly sandstone and carbonate reservoir characterization, rock typing, saturation-height modeling, permeability prediction, core analysis integration, and field development planning. Clients can expect technically robust, fit-for-purpose solutions, clear communication, and a strong commitment to delivering high-quality results that support informed business and development decisions.

Engineer

Civil Engineer specialized in construction cost estimating, budgeting, quantity surveying, cost analysis, and project planning. I have extensive experience in preparing budgets and commercial proposals for civil infrastructure, buildings, airports, industrial facilities, drainage systems, roads, and other construction projects. My expertise includes cost composition, quantitative takeoffs, unit price analysis, BDI calculation, SINAPI and SICRO cost references, subcontractor and labor cost research, physical-financial schedules, and bidding/tender proposals. I am highly proficient in Excel and experienced with construction budgeting and estimating software. I am detail-oriented, analytical, and committed to delivering accurate and reliable cost estimates that support effective decision-making and project execution.

Senior Project Controls, Cost Engineering, Quantity Surveying, and Project Engineering professional with 29 years of experience supporting major EPC, EPCI, Offshore Oil & Gas, LNG, FPSO, Brownfield, Fabrication Yard, Construction, Manufacturing, and Industrial projects. More than 19 years with McDermott Indonesia, supporting Project Controls, Cost Engineering, Cost Control, Project Engineering, Quantity Surveying, Material Management, Procurement Coordination, Forecasting, Progress Measurement, Earned Value Management (EVM), Cost Reporting, and Project Performance Management for complex multi-billion-dollar capital projects. Extensive experience establishing and maintaining integrated cost control processes covering budget development, commitment control, expenditure monitoring, cost forecasting (EAC/ETC), cash flow monitoring, cost variance analysis, trend management, change impact assessment, quantity verification, progress validation, earned quantity assessment, Value of Work Done (VOWD), and executive project reporting. Highly experienced in reviewing and interpreting Client Specifications, IFC, AFC, Isometric, MTO, BOQ, fabrication, and engineering drawings to support constructability reviews, Quantity Take-Off (QTO), Material Take-Off (MTO) reconciliation, fabrication planning, procurement readiness, progress measurement, engineering coordination, and project execution. Strong understanding of EPC project delivery throughout engineering, procurement, fabrication, construction, installation, commissioning, start-up support, and project closeout, working closely with Engineering, Procurement, Construction, Contracts, Planning, Finance, Supply Chain, Material Management, and Project Management teams to ensure alignment between cost, schedule, quantities, procurement, and project objectives. Experienced in supporting independent cost performance monitoring, validating project progress, monitoring budget utilization, identifying emerging cost trends, evaluating potential change impacts, supporting risk and contingency reviews, and providing timely cost and performance reporting to project leadership for effective decision-making. Recognized as Subject Matter Expert (SME) for SAP, MCPM, Oracle, and SPMAT/SMAT systems, supporting reporting standardization, governance compliance, dashboard development, data integrity, process improvement, and integrated cost-progress reporting across multicultural EPC organizations. Known for strong analytical capability, attention to detail, cross-functional coordination, commercial awareness, stakeholder communication, and the ability to deliver reliable cost and project performance information in complex, fast-paced EPC environment. CORE COMPETENCIES Cost Engineering & Cost Control ü Cost Engineering ü Cost Control ü Project Cost Management ü Budget Development & Control ü Cost Forecasting (EAC / ETC) ü Cash Flow Monitoring & Forecasting ü Commitment & Expenditure Control ü Cost Variance Analysis ü Cost Performance Reporting ü Cost Trending & Trend Register ü Change Management ü Cost Impact Assessment ü Estimate at Completion (EAC) ü Estimate to Complete (ETC) ü Executive Cost Dashboard Project Controls ü Integrated Project Controls ü Project Performance Management ü Cost & Schedule Integration ü Progress Measurement & Validation ü Earned Value Management (EVM) ü Earned Quantity Assessment ü Value of Work Done (VOWD) ü KPI Monitoring ü Schedule Performance Monitoring ü Forecast Accuracy Improvement ü Project Reporting ü Project Governance ü Risk & Opportunity Reviews ü Contingency Monitoring Quantity Surveying & Engineering ü Quantity Surveying ü Quantity Take-Off (QTO) ü Material Take-Off (MTO) ü Bills of Quantities (BOQ) ü Engineering Drawing Review ü IFC / AFC / Isometric Interpretation ü Fabrication Drawing Review ü Quantity Verification ü Fabrication Quantity Measurement ü Client Specification Review ü Constructability Support Procurement & Material Management ü Procurement Coordination ü Purchase Requisition (PR) Preparation ü Purchase Order (PO) Technical Review ü Material Requirement Schedule (MRS) ü Material Status Reporting ü Material Management ü Material Control ü Logistics Coordination ü Procurement Progress Monitoring ü Supply Chain Coordination Project Engineering ü Project Engineering Support ü Engineering Coordination ü Multidisciplinary Interface Coordination ü Engineering Deliverable Monitoring ü Fabrication Planning Support ü Construction Readiness Support ü Commissioning Support ü Brownfield Project Support ü EPC / EPCI Project Execution ü Offshore Fabrication Yard Operations Systems ü SAP ü MCPM ü Oracle R2P ü SPMAT / SMAT ü Navisworks ü AutoCAD ü AutoCable ü PIMS ü Microsoft Excel (Advanced) ü Microsoft Office ü DocuSign / MySign ü Kronos / MyTime