Hull freelance

Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.

Engineer, Superintendent, Supervisor / Technician, Inspector

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

Detailed in resume

Manager

Experienced as a QA/QC Welding Inspector in Oil & Gas and Shipyard industry. Excellent reputation for resolving problems and improving client satisfaction.

Inspector, Manager, Superintendent

I am experienced in oil and gas company over 12 years, i have background from Associate’s Degree of Mechanical Engineering. Related experience working in Quality department until 10 years and 3 years as assistant structural/piping supervisor. During as Quality, i was experience of jacket and topsides, jacket foundation of windfarm, piping, mining surface part, ship building fabrication, inspections related carbonsteel materials, stainless steel, Mining Surface Product, piping completion system, and pre-commissioning activity. Also having knowledge in engineering, manufacturing, familiar with international codes and standards. This involved shop fabrication to site construction, and erection, quality assurance and quality control for steelworks as material receiving inspection, prefabrication, blast and paint, field assembly, installation, inspection, testing, handover works for steel structures, piping, storage tanks and pressure vessels, Onshore Pipeline fabrication, More other phases of the works in oil & gas industries including onshore fabrication, and load out process.

Inspector, Engineer, Supervisor / Technician

**Senior Electrical Field Lead Engineer | Chief ETO (M.Sc.)**  *18+ Years in Hull Conversions, New-Builds & Shipyard Leadership*  I am a hands-on electrical field engineer specializing in **complex marine projects**, from hull conversions to DP3 vessel commissioning. With **direct CMHI Shipyard (Nantong) experience**, I bridge the gap between EPC contractors, construction teams, and design offices—resolving critical Technical Queries (TQs) and ensuring seamless HV (up to 10 kV), DP, and hybrid ESS integration.  **Key Strengths:**  - **On-Site Leadership**: Autonomous decision-making for electrical systems in shipyard environments.  - **CMHI Expertise**: Recent success in commissioning and inspections at Nantong yard.  - **Global Readiness**: Based in Shanghai/Nantong with valid Chinese visa; mobilizable after brief EU familiarization.  - **Technical Breadth**: HV installations, Kongsberg DP systems, Orca ESS, and FAT/SAT oversight.  I deliver **field-to-commissioning excellence**, combining rigorous standards with cross-cultural collaboration. Let’s connect to discuss how I can mitigate risks and accelerate your project’s electrical scope. 

SENIOR PROCESS-SAFETY/PROJECT ENGINEER (20 YEARS) MASTER IN REFINING, ENGINEERING & GAS (IFP, FRANCE) ENGINEERING, FIELD OPS, CONSTRUCTION and TRAINING EXPERIENCE in ON/OFFSHORE, UPSTREAM, MIDSTREAM, DOWNSTREAM, WATER TREATMENT and POWER PLANT

Engineer

Working as Senior Project Engineer on EPCI company, current assignment for FPU Integration Scope. Have experience on yard management, construction, project execution plan.

Engineer, Superintendent, Other

Athinarayanan Rajaram Mobile: +971 503382756, E-Mail: expatqcengg@gmail.com Hello,   Please find the CV attached for the POSITION of QUALITY ENGINEER/ INSPECTION PROFESSIONAL I'm particularly interested in this position, which relates strongly to my more than 15 years of experience in Project Management, Quality Assurance & Control, ISO Auditing and Welding Inspections across various geographies including United Arab Emirates, Qatar, Oman, Singapore and India.   Recently, I am working for a short term FPSO re-vamp project on MODEC MV10 Vessel at Dry Dock World Dubai as Quality Engineer; I believe I meet all the essential criteria for the position. Please find below a summary of my experience and key accomplishments across my career: · Expertise in applying QA & QC standards to various processes within the business unit; formulating & maintaining quality control & assurance objectives complementary to corporate policies / customer demands · Hands-on experience in implementing WHSE International Codes and Standards like OHSAS, ISO 14001 & NEBOSH; Offshore Marine Standards like ABS, DNV Classifications & MODU standards as well as Piping & Equipment Codes & Standard like API,ASME, ASTM · Successfully executed EPC projects for Oil & Gas, Offshore Marine, Water Desalination Plant in structural, piping, Pressure vessel and valves inspections · A result-oriented individual with strong analytical, negotiation, communication, interpersonal and organizational skills   I am targeting assignments in Project Management, Quality Assurance & Control and Consulting Operations.   I am keen to join your organization due to its leading position in the industry, great organizational culture, spirit of innovation, professionalism that characterizes your organization and its employees. I am attracted to this role on account of the organizational performance, values, challenges that it offers.   I appreciate your efforts in taking the time to review my credentials and experience. Looking forward to your response.   Sincerely, Rajaram Athinarayanan +971 503382756

Engineer, Inspector, Superintendent, Supervisor / Technician

More than 20 years of work experience in upstream and downstream, oil and gas industry specifically as an exploration & production (E&P) offshore facility engineer, refinery process engineering specialist, crude oil trader, and petroleum fuels retailer. Possess deep industry knowledge and competency in business development, customer relationship management (CRM), sales, marketing & trading, enterprise resource planning (ERP), supply-chain procurement & management, logistics, and, project engineering & management.

Manager, Engineer, Drafter / Designer

I am an experienced FEA Engineer with over 10 years of expertise in the offshore, subsea and marine industry. My career has been dedicated to solving complex engineering challenges using advanced simulation techniques, primarily leveraging ANSYS software. I specialize in structural analysis and design, linear and nonlinear analyses, fatigue assessment, lifting analysis and various other analyses. With a strong foundation in engineering principles and a proven ability to deliver accurate and reliable analyses, I am passionate about optimizing designs to enhance safety, efficiency, and performance in demanding environments. My hands-on experience with industry standards and collaborative approach to problem-solving make me a valuable contributor to multidisciplinary teams. I am now seeking an opportunity to bring my skills and experience to a dynamic organization, where I can continue to advance innovative engineering solutions for the offshore and marine sector.

Engineer

Engineering Manager with 17+ years of experience in Oil & Gas (Topsides and Hull). Experienced in detailed engineering operating centers, fabrication yard field engineering, and managing carry-over works. Proficient in live plant change management. Client experience includes ARCTIC LNG, Yamal LNG, Saudi Aramco, BAPCO, and ADMA-OPCO, with country experience in Japan, China, KSA and UAE.

Manager

* Technical Skills:Software Proficiency: Keahlian menggunakan berbagai perangkat lunak seperti AutoCAD, Solidworks, atau Inventor untuk desain dan analisis. * Machining Skills: Kemampuan mengoperasikan mesin manufaktur konvensional dan non-konvensional. * Fabrication Skills: Kemampuan merencanakan dan melaksanakan proses fabrikasi. * Mathematical and Scientific Knowledge: Pemahaman mendalam tentang prinsip-prinsip matematika dan ilmu pengetahuan yang relevan dengan bidang rekayasa. * Soft Skills (Kemampuan Lunak):Problem-Solving: Kemampuan utama untuk mengidentifikasi, menganalisis, dan menyelesaikan masalah yang kompleks. * Communication: Kemampuan untuk menyampaikan ide dan informasi secara efektif, baik lisan maupun tulisan. * Teamwork: Kemampuan bekerja sama dalam tim untuk mencapai tujuan bersama. * Creativity: Kemampuan menghasilkan solusi inovatif untuk berbagai tantangan teknik. * Project Management: Keterampilan untuk merencanakan, melaksanakan, dan mengelola proyek teknik dari awal hingga akhir. 

Engineer, Superintendent, Supervisor / Technician

Experienced QAQC Welding Inspector with certification from The Welding Institute (CSWIP 3.1) and NDT level 2 ASNT (UT/MT/PT). Exhibits strong attention to detail in inspecting weld qualities. Comes with a Diploma in Metal Fabrication Technology with more than 10 years experiences working in oil and gas industries especially in QAQC department with major involvement in welding inspection.

Inspector, Engineer, Supervisor / Technician

General engineer with 14 years experience oil and ga industry. I am actually working as a Subsea Equipments SPS/SURF Inspector

I've been working in many countries in various project covering variois aspect and position in oil n gas, marine, power, subsea and many others. My skill and experience will provide a valuable asset to the ompany

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

Experienced project professional with more than 25 years international experience in the industrial and energy sectors, herunder Industrial Drying & Evaporation, Floating Power, Offshore Oil & Gas and Offshore Maritime (FSO/FPSO/FSRU). International people management experience from managing cross-functional and multicultural teams globally across various regions. A strong background in General Management, Engineering, Project Management, Construction Management, Business Development and International Business. Broad practical experience of all phases of large and technical complex EPC CAPEX and OPEX projects with a good understanding of economic evaluation and technical analysis. Solid experience from Client and Contractor organizations with considerably site management experience from fabrication yards and shipyards. Strong stakeholder management skills and a proven ability to explain and implement complex technical matters to both internal and external partners. High personal commitment to HSE. Fellow of the Institute of Marine Engineering, Science and Technology – FIMarEST

Manager

It is noteworthy to mention that I embarked on my journey in the oil and gas drilling industry back in 2007, where I assumed the role of a rigger. Through dedicated perseverance and a commitment to honing my skills, I steadily ascended the ranks within the industry Central to my professional growth was the completion of rigorous competency training programs provided by esteemed international training providers. My practical experience encompasses a diverse range of drilling rigs, including Jack-Up drilling rigs, Submersible rigs, Tender rigs and Semi-submersible crane vessel. Each assignment presented unique challenges and opportunities, contributing to a well-rounded skill set and a nuanced understanding of the industry's intricacies. .s of 2017, i proudly hold the position of Barge Master, Assistant Barge Master, BCO (Ballast Control Operator)/ Ballast Engineer, a role that underscores my dedication to excellence and continuous advancement within the oil and gas sector, Each milestone in my career journey has enriched my knowledge base and reinforced my passion for the industry, driving me to seek new avenues for professional development and growth.

Other, Supervisor / Technician

Im currently working as a Commissioning Manager. Interested to work in China.

Manager

Certified Project Management Professional with 18+ years of experience managing large EPCM/EPCI projects in mechanical engineering for the Oil & Gas industry (offshore and onshore), as well as in marine and shipbuilding projects. Adept at leading multi-disciplinary teams to deliver projects safely, on time, and within budget.

Engineer, Manager

I am a highly motivated, and focused FPSO Construction & Quality professional, with excellent communication and man management skills, with extensive experience in TOP SIDE fabrication, FPSO Integration & commissioning of onshore and Responsible for Safety, Environment and on Site, the management of construction and pre commissioning activities, with multi-cultural contractors and workforces, with excellent project interdisciplinary interface and coordination experience, my key responsibilities being Safety, Quality and Progress. My responsibilities include HSE, ensuring contractor’s compliance with Schedule, Company Specifications, the approval of all Construction & Quality Procedures, Method Statements and ITP’s (Inspection and Test Plans) the management of Piping and Structural Fabrication at multiple fabrication yards, management of the onsite site installation of Piping, Structural, Mechanical equipment, Static and Rotating Equipment and Vendor Packages for Topsides Modules, the coordination of all Piping Pre Commissioning activities, Piping and Equipment Preservation, Nitrogen Helium Leak Testing.

Inspector, Engineer, Supervisor / Technician

More than Twenty years of experience in the multi-discipline quality personnel in Oil & Gas construction field of quality engineering, quality inspection, coordination, and projects experience. Knowledgeable / Experienced in working as a Quality Lead for Pipelay, Facility works Gas transportation, Storage tanks. Great ability to make sound decisions in a manner consistent with the essential job functions, good decision-making authority & responsibility skill. Good supervisory skills to identify root of problem, good analyzing skill for Problem Solving when the issue is more Complexity. Knowledgeable in Supervision/Coordination for Inspection of welding, Coating/painting, Insulations, civil works and E&I works for onshore Jacket, topside fabrications and offshore installations, pipelines and Subsea pipe lay, Tie-In works. Offshore worked on vessel Leighton Eclipse, Technip Global G1200, JASCON 34 Barg (Sea Trucks group-STG), TECHNIP Deep Blue pipeline installation, Blue Titanium, Posh Endurance and Posh Enterprises. Cryogenic LNG and Oil Storage Tanks, pressure vessels, Structural Steel and Static & Rotating Equipments Installation. Thorough knowledge of codes, Standards as per the relevant job. Well organized and have excellent problem-solving skills and good interpersonal and communication skills Extensive experience in Co-ordination with Inspectors, TPIA, Quality Inspection, RT film Interpretation and NDT Testing for Piping, Tanks, Pressure Vessels and structures works. Familiarity with welding processes SMAW, GTAW, and Electro fusion welding of HDPE. Material types A333 gr6, 316L Stainless Steel, Super Duplex.  Common knowledge of sound safety practices and personnel supervision.

Inspector, Manager, Superintendent, Supervisor / Technician, Engineer

Marine engineer with over 15 years of experience across vessel operations, shipyard projects, offshore platforms (FSO, FPSO, MOPU, jack-up rigs), and shore-based maintenance roles. Currently serving as a Maritime Maintenance Manager, overseeing the upkeep and operational readiness of a fleet of RoRo passenger ferries in Malaysia. Specialized in: ⚓ Marine engineering maintenance & repair ⚓ Dry docking and refit project supervision ⚓ Predictive and condition-based monitoring ⚓ Technical diagnostics and root cause analysis ⚓ Vessel asset management systems and IoT-based monitoring Known for effectively managing complex projects under tight operational constraints, optimizing maintenance strategies, and ensuring compliance with marine safety and regulatory standards. Passionate about improving vessel reliability, operational efficiency, and lifecycle performance while mentoring cross-functional technical teams. Open to global opportunities in marine operations, technical consultancy, or sales within the maritime industry.

Highly skilled and meticulous QA/QC Inspector with over 10 years of extensive experience in the oil and gas industry. Proven expertise in inspection and quality control, including supervision, preparing quality reports, assisting engineers in procedure preparation, and ensuring compliance with specified procedures from client or customer requirements. Demonstrated ability to conduct comprehensive inspections, ensure compliance with code and standard, and implement rigorous quality control procedures. Proficient in identifying and resolving defects, performing root cause analysis, and driving continuous improvement initiatives to enhance operational efficiency and product quality. Strong background in collaborating with cross-functional teams, managing quality documentation, and participating in internal and external audits. Committed to maintaining the highest standards of safety and quality, with a proven track record of contributing to successful project completions. Adept at training and mentoring junior inspectors, fostering a culture of quality and excellence.

Inspector, Engineer

6+ years of experience in project execution, document control, and legacy data management across the oil & gas and marine industries.

Other