Hire the best freelancers in installation for your project
Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.
Engineer, Inspector
Accomplished logistics professional with over 30 years of experience in logistics operations within the Oil & Gas industry. Specializing in project logistics for ECPI, and T&I contracts across various regions, including ASEAN, Middle East, and Africa. Proven track record in cost optimization, efficient planning, and successful project execution. Strong global network and expertise in leading cross-functional teams to deliver projects on time and within budget.
Manager
II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.
Supervisor / Technician, Superintendent, Engineer, Inspector
Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels. Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA. Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling. Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification. Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board. Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects. Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors. Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties. Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment. Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects
Superintendent, Engineer, Supervisor / Technician, Inspector
I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) • Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. • Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety
Engineer, Manager, Superintendent, Inspector, Supervisor / Technician
Senior Instrument and Control System Engineer with 20 years of experience in project execution, design validation, and commissioning of instrumentation systems across petrochemical, power generation plants, and oil & gas sectors. Proven ability to coordinate multidisciplinary engineering activities, prepare technical documentation, and support construction teams during installation and commissioning phases. Extensive experience in validating vendor-supplied control valves, process sensors, and safety elements in compliance with international standards
Engineer, Supervisor / Technician, Superintendent, Inspector
6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.
Engineer
Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.
Engineer
I am a Bachelor of Science in Instrumentation and Control Engineering graduate from Batangas State University, Philippines batch March 2004. My 16+ years experience in the Power Generation (Renewable-Binary Geothermal), O&G, Sulphur Granulation / Storage / Shiploading, Petrochemical, Water Desalination, and Construction/Commissioning/Maintenance Industry has provided me with the opportunity to enhance my overall knowledge of a variety of facets and the workflows in Engineering, Construction, Completions/Commissioning, Maintenance, and Operations. Being a versatile Instrument Engineer is the key to any successful and safely executed project and working in challenging environments has provided me a unique understanding of the requirements necessary to deliver great results in a safe productive manner.
Engineer, Inspector, Supervisor / Technician
Subsea Engineering Management and Expertise My career starts in 1981 by joining Comex SA a diving-subsea Company based in Marseille-France. I follow then a long international career as subsea engineer/manager to design, construct, and install Oil & gas production fields world-wide. I have been working for various recognized subsea Companies contracted by major offshore Operators. My professional skills and strength stand in my capacity to: • propose innovative and cost-effective technical solutions, • lead efficiently large engineering teams, • bring challenging project objectives to success.
Manager
* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage
Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician
Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.
Engineer
An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks
Engineer, Manager, Other, Supervisor / Technician
SUMMARY I am a Subsea Engineer with twelve years' work experience. Currently working as freelance consultant Project Engineer for onshore and offshore project. I previously worked as a senior subsea engineer at WorleyParsons on the HESS Deep Water Tano Ghana Project on riser/pipeline, subsea controls/ hardware & Flow Assurance SURF FEED design and also as Subsea Field Engineer at WorleyParsons Atlantic with TechnipFMC on Tullow oil's Tweneboa, Ntomme, and Enyinra (TEN) and Jubilee oil fields project in Ghana and Technip FMC Bonga project in Nigeria for two years. At TechnipFMC, I was responsible for performing Site Receival Test, mobilization and demobilization subsea operations, SIT (System Integration Test), FAT (Factory Acceptance Test), Load Out, EFAT (Extended Factory Acceptance Test) and mandatory/periodic maintenance/installation operations on subsea equipment including tubing hanger, Christmas tree, Manifolds, Riser Base, PLET, SCM, ROV tools and other subsea equipment, running tools. Provided support for offshore completions of well and part of the TEN oil and gas field Subsea Umbilical Riser Flowline (SURF) and Installation Hook-Up and Commissioning (IHUC) commissioning team for topside and subsea structure on Tullow TEN FPSO in Singapore. Also involved in the TEN field operational field start-up, pre commissioning activities, installation of flowlines, in-line umbilicals, Hydraulic Flying Leads, EFLs, flexible pipelines and subsea structures in Ghana. Gained expert knowledge in subsea engineering (MSc) from the University of Aberdeen, Scotland which entails the use of CAE/FEA Software for various designs relating to subsea production systems, pipelines design, installation and soil mechanic, Subsea Construction, Inspection and Maintenance, Subsea Equipment Integrity, Safety and Reliability Engineering, Risers and Hydrodynamics and Subsea controls and currently working toward attaining chartered engineering status and a member of the Project Management Institute (PMI). Four and half years' experience in the Mining industry, mainly working as operational maintenance superintendent, senior maintenance supervisor and maintenance planner with an Australian mining contracting company called African Mining Services (AMS) and was responsible for operations and maintaining mobile heavy-duty mining equipment.
Engineer, Superintendent, Supervisor / Technician, Manager
I am an experienced Electrical Instrument Inspector with over 9 years of experience in the electrical field. Proficient in inspecting, testing, and maintaining a wide range of electrical instruments and equipment. Strong knowledge of electrical codes and regulations, as well as excellent problem-solving and communication skills. Committed to safety and quality workmanship I have had the opportunity to work on a variety of oil and gas projects. I have worked on multi-national teams and have experience communicating with contractors, engineers, and other professionals from different cultural backgrounds. I am well-versed in using inspection and testing equipment, and I am comfortable working in both indoor and outdoor environments. I am an excellent problem solver and am able to think critically and make sound decisions. I am a highly organized and detail-oriented professional. I am dedicated to ensuring the safety and compliance of all electrical systems and am always willing to go the extra mile to ensure the satisfaction of my clients. In summary, I am an experienced electrical Instrument inspector with a strong background in codes and regulations, extensive knowledge of electrical systems and components, and experience working on multi-national teams. I am dedicated to ensuring the safety and compliance of all electrical systems and am committed to providing excellent service to my clients.
Inspector, Supervisor / Technician
Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides
Engineer, Manager, Inspector
*Construction / Quality Controller / Mechanical Completion* Fabrication and erection of Jack up Drilling Rig, Offshore (Platform). Completely knowledgeable in Welding, HVAC, Piping, and Rotating and Static Equipment Installations. Various types of Testing during Mechanical Completion i.e. Pressure Test (pneumatic & hydro) on process piping, HVAC and testing for pre-commissioning.
Inspector, Engineer
19 years’ diverse range of relevant experience in the oil and gas Brownfield/Greenfield. Contribute a dynamic, result - oriented and offering focus leadership in delivering safety and project as Offshore Construction Site Representative within time frame and budget given. Consistently achieve performance goal through enthusiasm, tenacity and initiative, which complement knowledge / expertise in upstream and downstream.
Superintendent, Other, Manager
An enthusiastic, energetic, and experienced Chemical Engineer with over 14 years of experience in Operations, Systems Engineering, Installation, Commissioning, Maintenance, WANO Peer Reviews and Design review for PWR Nuclear Power Plants. Throughout my career, I have consistently demonstrated strong work ethics, led multidisciplinary teams successfully, and have gained valuable experience in system analysis, troubleshooting, equipment maintenance, plant operations and design review. During the commissioning phase, I have carried out cold/hot tests, pre-startup tests, turbine rolling; reactor critically and load rejection tests jointly with CNNC, CZEC and QNPC. I have vast experience of nuclear reactor operations as a senior reactor operator. Being an SRO and shift engineer, I have worked with WANO teams to focus on one goal: “Excellence in Nuclear and industrial Safety, and to maximize nuclear safety and reliability of nuclear power plant.”
Engineer, Drafter / Designer
Orchestrated the successful implementation, testing, and activation of intricate electrical systems within the Oil and Gas/Marine sectors, leveraging 35 years of industry expertise. Ensured strict adherence to safety regulations, resulting in an impeccable safety record throughout all projects. Actively seeking a challenging role as an Electrical Project Engineer to utilise my exceptional project management skills and deliver unmatched electrical installations. Recognized for demonstrating outstanding proficiency in electrical construction/commissioning roles, cultivating partnerships with prestigious EPC companies including Shell, BP, Technip, AMEC, Chiyoda, Samsung, Maersk, SBM, and Total. Showcasing extensive experience in onshore/offshore Marine, Oil & Gas, FPSO conversions/new builds. Proficiently navigating the ATEX Directives and skillfully installing electrical equipment in hazardous environments. Dedicated to providing efficient electrical solutions and fostering overall success.
Superintendent, Inspector, Supervisor / Technician
* Hardworking * Can handle pressure working offshore * Dedicated and organize * Extensive knowledge on process workflow.
Engineer, Drafter / Designer
I am a young, energetic, well-motivated professional. I have excellent Technical skill and believe in participatory learning process and approach. I can maintain the technical matters relating to Mechanical, Civil, hydraulic and Industrial mechanics. I have done my work with Saudi Aramco & Dar Petroleum. I am having ability to function in a multicultural environment, to lead and motivate multinational teams and familiarity with cost management processes. Assuring of my best services at all
Inspector, Engineer, Supervisor / Technician
I have extensive experience and in-depth familiarity with Oil & Gas offshore fabrication and construction projects. My professional journey has been enriched through involvement in diverse projects, exposure to various construction disciplines, and collaboration in multinational and multicultural working environments. My career objective is to contribute as a representative and team member in an establish company, utilizing my skills and experience to archive project goals effectively and drive organizational success. Following with my general duties and responsibilities as a Construction Manager / Superintendent / Engineer. General duties and responsibilities Understand, strategize, and coordinate the project construction scope and requirement on the project. Liaise and coordinate with project stakeholders, including clients, discipline leads, department managers, engineers, subcontractors, and vendors to ensure seamless execution. Enforce strict in site execution meeting project QHSE expectations, engineering requirements, and project specifications. Delegate action, responsibilities, and define project deliverable requirements in terms of both scope and schedule to subordinates. Supervise & guide subordinates and contractors, ensuring alignment with project goals and address construction challenges, resolve conflicts, and implement effective corrective active. Track project milestones and prepare progress reports to managers and planning team. Present updates, heads-up risks, and recommend actions to maintain construction progress momentum.
Engineer, Manager, Superintendent
Result-driven Mechanical Rotating Engineer with over 13 years of progressive experience in rotating equipment, project management and maintenance within oil & gas and petrochemical industry. Expertise in overseeing rotating & turbomachinery equipment FAT, installation, pre-commissioning, commissioning, maintenance, overhaul, refurbishment, Plant shutdown and Turnaround ensuring compliance with API, ASME, ISO and Petronas Technical Standard. Proven track record in delivering technical solutions and managing cross-functional teams for clients such as Petronas and TNB Genco.
Engineer
MSc. in Petroleum Engineering and BEng. in Mechanical Engineering, as a Senior Engineer with 13 years of experience in the oil and gas sector, I bring 10 years of specialized expertise as a Rotating Equipment Engineer. My skills encompass rotating equipment design, installation, and commissioning for both onshore and offshore projects, along with operation and maintenance. I have hands-on experience in condition monitoring and reliability improvement, focusing on optimizing operational performance, on top of proven skills in troubleshooting, supervising, and executing repairs and overhauls of turbomachinery (steam turbines, centrifugal and reciprocating compressors, pumps, fans, blowers, gas turbine). I am an enthusiastic, goal-driven professional with a strong commitment to safety as my top priority.
Engineer, Superintendent