Marine System freelance

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Summary: Detail-oriented PE with 5 years of experience and a zest for solving complex problems. Seeking to use proven project management and design skills to improve quality, cost and time

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

6 years experience as civil/structural/marine engineer in various company. Most of them related to oil & gas sector, has also been involved in offshore jacket fabrication. With a robust background in structural design and facility engineering, I bring extensive engineering expertise encompassing diverse projects. Eager to pivot into a project engineering role, I aim to leverage my experience to drive successful project outcomes through strategic planning, coordination, and innovative problem-solving.

Engineer

14 years working experience in the oil and gas industry. Area of expertise includes pipe stress analysis, piping material specification and piping design. Various of project stages has been involved including Conceptual, FEED, Detailed Design, Green Field and Brown Field. Familiar with international codes and standards such as ASTM, ASME, ANSI, API, BS, NFPA and NACE as well as client's technical standards such as PTS, SHELL's DEP and EPMI GS. Has been involved extensively in Piping Stress Analysis using CAESAR II Software for onshore and offshore. Responsible for Static Analysis of Critical Piping systems connected to Pumps, Heat Exchangers, Vessels, Compressors, Pig Launchers and Receivers, Air Coolers, etc. Perform variety of Analyses (Flange Leakage, Transportation, Blast, API 610 Pump, API 617 Centrifugal Compressors and etc). Well conversant with various load cases for Seismic, Spring Hanger, Pumps, Bridge, Wellhead and etc.

Engineer

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

I have with more than 10 years work experience in Health Safety and Environment Department In Onshore & Offshore field such in Drilling & Completion campaign, Oil & Gas Fabrication , Spool Base subsea pipe line, Subsea equipment Fabrication, Marine services and Maintanance, Port & Logistic, Civil & Earth Work construction and CPO Refinery Construction. I am undertake a challenging career opportunity in Occupational Health & Safety where I can utilise my broad training and skills. Willing to be place in remote area and able to complated tasks and responsibilities. Healthy physically, energetic, able to work in team or individual, friendly and like challenge, fast learning with new enviromental.

Supervisor / Technician, Inspector, Engineer

Orchestrated the successful implementation, testing, and activation of intricate electrical systems within the Oil and Gas/Marine sectors, leveraging 35 years of industry expertise. Ensured strict adherence to safety regulations, resulting in an impeccable safety record throughout all projects. Actively seeking a challenging role as an Electrical Project Engineer to utilise my exceptional project management skills and deliver unmatched electrical installations. Recognized for demonstrating outstanding proficiency in electrical construction/commissioning roles, cultivating partnerships with prestigious EPC companies including Shell, BP, Technip, AMEC, Chiyoda, Samsung, Maersk, SBM, and Total. Showcasing extensive experience in onshore/offshore Marine, Oil & Gas, FPSO conversions/new builds. Proficiently navigating the ATEX Directives and skillfully installing electrical equipment in hazardous environments. Dedicated to providing efficient electrical solutions and fostering overall success.

Superintendent, Inspector, Supervisor / Technician

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Experienced Electrical Designer with over 13 years in the offshore and shipbuilding industries, including 3 years in Engineering Management. Proven expertise in SP3D/SM3D modeling, electrical system design, and inter-discipline coordination. Adept at preparing and supervising electrical deliverables, including ship design elements such as docking plans, shell expansion plans, and general arrangement plans. Demonstrated ability to thrive in high-pressure environments, with strong interpersonal skills and a commitment to delivering high-quality work. Dedicated to continuous learning and improvement in a dynamic and evolving field.

Drafter / Designer, Engineer, Manager

I am hold title Professional Engineer certified by Board of Engineer Malaysia (BEM). A position as a Marine or Professional Mechanical Engineer allowing me to develop my knowledge and skills in marine system design and Mechanical especially in develops Oil and Gas (Rotating&Static). I am specialist in HVAC design system, Rotating and lubricant oil application&specification.

Engineer, Manager

Able to take any challenges, able to work in various culture and environmental, self-motivated person, able to make a rational decision with limit of authority, hardworking, responsible and supportive to team member.

Drafter / Designer

I'm Scientist, Pipeline and Engineering in Specialist Structure/Construction of Body with H-Beam, Plate and Weld: 1. Pipeline Engineer: Welding Engineer & Field Joint Coating   2. Mechanical Engineer in Structure of Body: Aerospace, Submarine/Naval Architect, Hangars, Storage Tank, Vessel, Over Head Cranes, Pipe Rack, Shelter, Bridge and Girder. STRENGTHS:   Adaptable, Team-Player, Goal Oriented, Optimistic and Managerial Skill   Achievement: I am Indonesian who first discovered the rubber coating chipped in Project Pipeline in Sumatera 370KM from Belawan / Medan to Arun / Aceh and Pipeline in Jakarta MKMT (Muara Karang-Muara Tawar) 30KM from Muara Karang to Muara Tawar coral that has never been detected / Inspection in the project pipeline conducted by PT. Pertamina (circa 1980s), caused by pipes that are already on standby in the above Weld Joint longer to be influenced by several factors such as the effect of hot weather, the cold night rain resulting in chipped rubber joints Coating

Engineer, Manager, Inspector, Superintendent

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

• Dedicated, competent and experienced in Marine Engineering works with capability in planning and developing multiple shipyard repair projects and oil and gas operation. • Proven track record of preparing and executing project plans and programs • Ability to ensure safety procedures are complied with • Adept in overseeing project implementation - ensuring work is carried out in accordance with companies, authorities, and Class procedures • Ability to work with other professionals to ensure that projects are successfully completed to customer's satisfaction.

Superintendent, Manager

I have over 20 years of experience Occupational Health, Safety and Environment in Offshore & Onshore Rig environment, including more than 11 year's in  occupational health and safety, I bring a wealth of expertise in risk management, incident investigation, and compliance with HSE standards. I have actively contributed to improving workplace safety by conducting regular hazard assessments and implementing effective control measures. My efforts have consistently ensured compliance with industry standards and reduced incident rates. I would be honored to bring my skills and commitment to your team. Valid courses: OGUK, BOSIET, HUET, Seaman Book, OPITO H2S, IOSH.MS, NEBOSH, NVQ-Level 6.

Engineer

Proficient in cross-functional leadership roles throughout the FPSO product lifecycle, encompassing project initiation, construction, mechanical completion, commissioning, testing, client pre-acceptance, first oil & client validation, ongoing operations, and brownfield offshore project management.  I Master Mariner, PMP ongoing with 29 years of experience across leadership roles in EPCI projects in shipyards as well as offshore, marine construction, conversion & topsides integration, offshore operations, ship management, drydocking, and ship operations.  Marine Construction and EPCI:  ·      Led projects as brownfield Offshore Project Manager, Deputy Construction Manager, Site Manager, and Marine Superintendent for FPSO hull repairs, conversions, and topside integration.  ·      Technical & Operational Management: Extensive hands-on experience in vessel inspections, condition assessments, and maintenance planning, ensuring operational readiness and minimizing downtime. Familiar with contracts and charters to assess critical systems' operational conditions. ·      Compliance & Regulatory Oversight: Expertise in ISM implementation, internal audits, and preparing vessels for surveys and external audits. Led initiatives to ensure alignment with evolving marine legislation and industry standards. ·      Offshore & Marine Projects: Led structural repairs and tank conversions on operational FPSOs, collaborating with stakeholders to ensure safety and efficiency without disrupting production. Experience in new-build FPSO commissioning, moorings, riser pull-ins, and operational readiness. ·      Fleet & Asset Management: Proficient in overseeing vessel takeovers, flag transitions, and ensuring compliance with Oil Major requirements. Skilled in risk mitigation, system evaluations, and implementing lessons learned to enhance operational efficiency. ·      Team Leadership & Stakeholder Engagement: Demonstrated ability to lead multi-disciplinary teams across geographies, fostering collaboration between technical, operational, and regulatory stakeholders.   Project Management: EPCI Brownfield Project Manager, (MODEC), Deputy cConstruction manager for EPCI FPSO hull repairs, conversion & top sides Integration Management: Held leadership roles as Marine Superintendent, Deputy DPA.  Ship Operations: Extensive experience as Master in ship operations out at sea managing VLCC’s and all tanker types, including shuttle tankers.   I have worked in diverse environments in offshore operations, office-based roles, project sites, and sail/towage activities. My contributions during project phase in engineering, equipment selection, piping layouts, and equipment upgrades have been consistently recognized and appreciated by senior management. These efforts have led to improvements in project schedules, cost reduction, and operational efficiency. Operations & Offshore Have extensive experience in conducting FPSO marine equipment performance testing, hull integrity assessments, arrival preparations, mooring, and first oil operations. My expertise includes overseeing the startup and ensuring the operational readiness of FPSOs. I have led the planning, development of operational procedures, and execution of key activities such as mooring, riser pull-in, first oil production, bunkering, and offloading.   The operational procedures and safety practices established during these initial phases of operations have been continued and sustained over the subsequent eight years of continuous operations. Participated in the pre-operations team for new hull construction in Japan and integration at a Singapore shipyard. Led hull acceptance sea trials, hull and marine integrity tests, and class acceptance, ensuring readiness for sailing to the Singapore integration yard. Oversaw the startup of all marine equipment, from final loop testing to cold operation checks. Played a key role in the FPSO pre-acceptance process for all marine systems by Petrobras. Managed the operations and testing of marine equipment, including pumps and pipelines, during the transit. EPCI , Shipyards My expertise includes directing complex flare tower repairs and converting voids to ballast tanks on an operational FPSO without shutdown as offshore project manager. In shipyard environments, have coordinated engineering and construction processes to meet hull strengthening requirements for topsides and integrated riser and mooring support structures as deputy construction & integration manager. As site manager and deputy construction & integration manager have ensured seamless alignment between engineering, procurement, and construction, mitigated risks, and maintained high levels of stakeholder satisfaction. Notably, I led VLCC conversions, overseeing tank cleaning, gas freeing, dry docking, hull repairs, and conversion, as well as towage operations, while collaborating with engineering teams to optimize marine system selection. I have actively participated in lesson learnt to bring forward good practices and design upgrades to future projects. Office FPSO - Have been part of project management team, marine schedule planning, identifying reducing dependencies, identifying major construction that can executed in a parallel process increasing float, reducing risks. Have  participated in the discussions of optimisation of marine hull spaces, pump room, engine room for top sides and marine deck equipment spaces and other marine engineering opas.   Brownfield project on operating FPSO - Developed a comprehensive project plan and process for hot work, structural repairs, and converting void tanks to ballast tanks in adjacent spaces containing heated products at 55°C, ensuring compliance with national labor heat stress regulations without plant shutdown. Created detailed timelines and budgets, assembled the project team, facilitated team building. Prepared SIMOPS dossier in accordance with TOTAL's requirements to commence major activities and led project execution, effectively managing risks and controlling costs to achieve successful completion within budget as project manager. I am looking forward to assisting during feed, contracts, analysing best suited marine deliverables & optimizing budget as per requirements, help plan the schedule, w.b.s. and identify schedule dependencies to deliver marine completion prior integration. Be at site during schedule phase closures, commissioning & equipment performance tests, attend FATs and preparation of all marine equipment to be operational and ready prior vessel moving to final location. Be offshore during start-up, develop and explain all operational procedures to ensure safe operations and backup offshore as required.

Manager, Superintendent

Experienced Tender/Proposal Manager with a robust background of international and multicultural experience aligned to oil & gas industry needs. Strong history of successfully analyzing international tenders, preparing, and evaluating tenders, winning multimillion-dollar contracts, and leading diverse expert teams. Able to expertly balance technical and commercial needs to deliver exceptional results. Preparing for energy transition and ready to learn new concepts and technologies.

Engineer, Manager

Bachelor’s degree professional with over 15 year’s profile of generation top quality work performance and delivering successful results within lively business scenarios. Proven expertise in handling overall supply chain management, operation and marine with EPCC fabrication and manufacturing background. Possess exceptional negotiation, admirable client convincing and excellent communication skills. Keenly interested to explore a more challenging work profile to utilize gained experience and developed expertise and leadership attributes.  Highly motivated, versatile and workaholic . With over 10 years experienced in the Supply Chain Management which includes from Tendering, Procurement, Logistics & Warehousing process. Delivering the task base on the timeline or schedule given with zero LTI. Passionate about empowering people to work towards their potential.   

Manager

I am experienced engineer with a diverse background, I possess the skills and knowledge gained throughout my career. I have gained extensive experience in a variety of engineering fields in Oil&Gas onshore and offshore projects, Petrochemical, Nuclear, Shipbuilding sectors. I have worked for many companies and in many countries, which has allowed me to gain a unique perspective on engineering practices and processes. I am proficient in 2D/3D modelling and calculation software, and have experience in engineering design and field construction. I have consistently delivered high-quality results, and have been recognized for my ability to think creatively and strategically, to find innovative solutions to complex challenges. In addition to my technical skills, I possess excellent communication and interpersonal skills, which have allowed me to work effectively with colleagues, clients, and stakeholders at all levels. I am self-motivated and able to work independently, as well as be part of a team. I am a strong problem-solver, and I am able to think creatively and strategically to find innovative solutions to complex challenges.

Engineer

I'm very well experience in design engineering and project execution types of projects.

Engineer, Drafter / Designer, Superintendent

I am Senior Marine Engineer who experienced in floaters engineering such as FPSO, FSO, MOPU, FSU, and TLP. My experienced concentrated on the Marine Systems discipline in FEED, Detail Engineering, Construction, Procurement and Operations and Maintenance. Able to prepare calculations, datasheet, specification, report and all related with engineering requirement.

Engineer

    Dear Hiring Manager, This letter expresses my keen interest in applying for a suitable position in your organization. Below are the details that make me a potential candidate for your organization. I am an accomplished and proactive Project Manager with 15+ years of experience in the upstream oil/gas and marine industries. Proven expertise in planning, directing, and executing complex engineering design projects.   At CTS Offshore and Marine LLC, I have successfully led engineering projects across Europe, UAE, and Singapore, acting as the Group Project Manager. My role involved managing all commercial activities related to engineering work, from preparing RFQs to selecting and finalizing vendor quotes for outsourcing, invoicing and payment follow-up. My comprehensive knowledge of the commercial and financial aspects of the marine business, combined with my technical expertise, has enabled me to deliver turnkey Green technology marine retrofits/ upgrades and decarbonization projects. This included coordinating 3D scanning, feasibility studies, basic and detailed engineering, material purchases, prefabrication, and installation works.   My ability to liaise effectively with major stakeholders, including Ship Owners, Ship Managers, OEMs, and classification societies, has been instrumental in ensuring project success. Additionally, my experience in preparing P&L statements and managing project budgets has equipped me with the financial acumen necessary for this role. I pride myself on my problem-solving skills and my commitment to process improvement, which has consistently led to operational excellence.   At Goltens India Pvt Ltd, I managed green technology projects for various types of vessels, providing technical expertise during material purchases, fabrication, and installation work. My previous roles at Harris Pye and Zentech India Offshore and Marine Ltd further honed my skills in mechanical and marine piping design, project planning, and stakeholder coordination.   Additionally, I hold a degree Bachelor of Technology in Mechanical Engineering from Anna University, India.   My resume is enclosed for your consideration. I am available for a net-based interview process or please feel free to call me at +971- 543 903 530. I look forward to hearing from you soon. I appreciate your time and consideration.                   Regards, Sudhir Subramanian    

Manager, Other, Superintendent

Engineering-based professional with experiences in fabrication (construction) and installation for various type of platforms/modules/subsea structures. Have strong knowledge on heavy productivity arrangement and optimilization, lifting & transportation plan, constructability review, and preferable construction sequence based on available resources. Apart from above, exposures and experiences on shop drawing aspects and various departments interface handling are in top notch level.

Engineer