Material freelance

Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.

Engineer, Superintendent, Supervisor / Technician, Inspector

Onur is an experienced oil and gas, heat exchangers, pressure vessels, static equipment, and packages engineer and engineering manager with 20 years of international experience and very good project track in FEED, EPC, PM especially for Oil & Gas, Energy and chemical projects including also grassroots, revamp and de-bottlenecking phases. Supervises and coordinates engineering activities thermal and mechanical design, preparation of material requisitions, datasheets, engineering drawings, vendor follow-up, vendor calculation and drawing check. Supervises and coordinates engineering activities, technical bid evaluation and procurement activities of equipment and vendor expedition. Coordinates project execution, manhour expedition and estimates, engineering activities and budget. Follows-up and coordinates PMC company activities.

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

I have more than 9 years experience on Marine Consultant, Shipyard, Oil & Gas and Power Plant industry in engineering modeling design, fabrication, budgeting/cost control, and project management scope.

Engineer, Superintendent, Manager

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

Asset Integrity Management EMAS Asset Integrity Management ·       Developed a comprehensive Asset Register for all tagged equipment, including electrical, rotating, static, civil, and instrumentation assets. ·       Prepared a detailed Bill of Materials (BOM) for all tagged equipment to support maintenance planning and inventory management. ·       Established a structured Maintenance Plan (MPlan) for rotating, static, electrical equipment, and instrument. ·       Developed Failure Modes and Effects Analysis (FMEA) to identify potential failure points and improve equipment reliability. ·       Created an Equipment Reliability Strategy (ERS) to optimize maintenance schedules and minimize equipment downtime. Gas Lift Compressor (GLC) – J4DP-A Wells ·       Performed a comprehensive RAM analysis of the GLC process system using MAROS Software, optimizing system efficiency and uptime. ·       Developed a complete BOM for the GLC process system based on the Piping & Instrumentation Diagram (P&ID) provided by the vendor. FEED NC8 GFD Project ·       Conducted a detailed RAM study inclusive of Basis of Study and RAM report for the NC8 Wellhead Platform (WHP) using MAROS Software. ·       Developed a CR report and TOR for CR workshop inclusive of the following nodes: o Installation of riser from NC8-WHP o Installation of new pipeline within the field o Installation of Jackets and Topsides of NC8-WHP o Installation of HTI at NC3-WHP o Installation of subsea cable FEED – Baram Junior Cluster ·       Conducted an Safety Critical Element-Performance Standard (SCEPS) study for HTI at BNCPP-B platform. BED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. DED – Baram Junior Cluster ·       Conducted an SCEPS study for HTI at BNCPP-B platform. The SCEPS is updated based on the newly provided P&ID, EESA report, Fire Fighting Layout, etc.   Corrosion Design & Material Selection EPCC Kerteh Rejuvenation Project (KREJUV) ·       Conducted a Corrosion Design Basis Memorandum (CDBM) for an onshore pipeline for KREJUV and utilized ECE 5.8 and ASPEN Hysys for process and SLC calculation. BED for Industrial Effluent Treatment System (IETS) Upgrading Project at GPK ·       Conducted a CDBM for non-metallic piping and tanks within the system. FEED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at Fatimah Drilling Platform-A (FTDP-A), Salbiah Drilling Platform-A (SLDP-A), and Baronia Central Processing Plant-B (BNCCP-B) using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. BED Quadruple Project Phase 2 ·       Conducted the CDBM and Material Selection Study as part of the Basic Engineering Design, including comprehensive simulations, calculations, and technical evaluations. DED – Baram Junior Cluster ·       Conducted Material Selection Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period, supported by process data from ASPEN HYSYS. ·       Conducted CDBM Studies for topside piping, utility piping, and pipelines at SLDP-A and BNCPP-B using ECE 5.8 to assess corrosion rates for a 10-year operation period.   Safety & Constructability Review Studies Drop Object Protection – KND Platform ·       Developed HAZID and Constructability Review (CR) reports for Drop Object Protection Study. FEED – Baram Junior Cluster ·       Scriber for HAZOP and HAZID studies for BNCPP-B and SALBIAH & FATIMAH Drilling Platforms. DED for BEKOK-AA New Gas Injection Flowlines ·       Developed HAZOP, HAZID, and Thermal Radiation & Gas Dispersion Studies to ensure safe and efficient flowline design and operation. DED – Baram Junior Cluster ·       Conducted Bow-Tie study for SLDP-A based on existing HSE Case for BNCPP-B and HER report developed. Firewater System Analysis for PM3S Bunga Raya Complex ·       Developed an Assumption Register for Firewater Demand and Hydraulic Calculations. ·       Prepared the Firewater Demand Calculation Report. DED – Baram Junior Cluster ·       Conducted an Bow-Tie study for HTI at SLDP-A WHP (Greenfield). EPCC Kerteh Rejuvenation Project (KREJUV) ·       Developed Firefighting, Lifesaving, and Safety Equipment Datasheet and Specification.   Front-End Engineering Design, Feasibility Study, & Project Management Feasibility Study for PILOT Project (Current) Project Planning & Coordination: ·       Conducted Pre-Project Kick-Off Meeting activities, including: ·       Defining the Scope of Work ·       Establishing the Project Schedule ·       Developing the Master Deliverables Register ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Technical Design: ·       Performed Steady-State Flow Assurance Analysis using PIPESIM. ·       Developed the Subsea Production System Report detailing subsea configurations and system integrity. ·       Created the Design Basis for Process, outlining key process parameters and design considerations. ·       Formulated the Overall Field Development Scheme to optimize production and operational efficiency. ·       Developed the Brownfield Modification Report for integration with existing facilities. ·       Engineering Studies & Reporting: ·       Prepared the Risk and Opportunity Report to identify potential project challenges and mitigation strategies. ·       Conducted a Concept Screening Assessment to evaluate viable development options. ·       Compiled the comprehensive Final Feasibility Report, consolidating all technical, commercial, and risk assessments. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting.   Feasibility Study for FB-1 Market & Commercial Analysis: ·       Conducted a Market Survey Research to evaluate potential vendors, technologies, and cost implications. ·       Developed a comprehensive Procurement and Contracting Strategy to streamline project execution and optimize costs. ·       Developed a Cost Estimation Report based on AACE Class 5 standards to establish preliminary project budgeting. ·       Created a Technical Assurance Plan for the FEED Phase to ensure compliance with industry standards, technical integrity, and project quality. Risk Management: ·       Prepared a detailed Risk and Opportunity Assessment to identify potential challenges and strategic opportunities throughout the project lifecycle. ·       Process Safety & Design Evaluation: ·       HAZID (Hazard Identification) Study featuring twelve (12) nodes, evaluating: ·       Two tie-in options: MPPL or Existing WHP ·       Comparative assessment between Wellhead Platform (WHP) and Subsea Production System (SPS) configurations. Pipeline Engineering & Integrity Assessments for PL354 & PL359 ·       Executed detailed pipeline integrity assessments and provided technical solutions to enhance operational reliability and safety. HSE & Fire Protection Philosophy Development for BioMEG Commercial Plant ·       Led the development of the HSE and Fire Protection Philosophy, ensuring alignment with industry best practices and regulatory requirements.   BED Dam Doi and Khanh My WHP and Pipeline Installation and Modification ·       Developed Value Engineering (VE) reports for DD-WHP, KM-WHP, and HTI at BK-C WHP. ·       Developed CR reports for the following nodes: o Installation and modification of new extension deck at BK-C WHP o Installation of riser at BK-C WHP o Installation of Jackets and Topsides for DD-WHP and KM-WHP o Installation of new pipelines Advanced Diagnostics & Predictive Modelling: ·       Designed models using iCON (Symmetry) by SLB for rotating equipment, including pumps, compressors, gas turbines, and steam turbines. ·       Utilized live input variables from OPUs to assess equipment health, collaborating closely with Group Digital and Process Engineers. Fault Diagnostics & Reliability Analysis: ·       Developed Failure Mode and Effects Analysis (FMEA) for extruders and Hydraulic Power Recovery Turbine (HPRT) based on ISO 14224 and Equipment Reliability Study (ERS) data. System Integration & Monitoring: ·       Deployed MRCSB and PGB trains into PRiSM Client, integrating alarms, P&ID diagrams, and DCS snapshots for continuous monitoring. Asset Life & Extension Studies: ·       Conducted an Asset Life Study (ALS) for 18 rotating equipment units at Subang Airport in collaboration with PETRONAS Dagangan Berhad (PDB), providing recommendations for future maintenance and operational strategies. ·       Performed an Asset Life Extension Study (ALES) for rotating equipment Kasawari CCS M1, assessing long-term asset viability. Rotating Equipment Design: ·       Operational optimization in the design evaluation of the E11 Fac and E11 Fac Phase 1 projects, contributing to the extension of the MLNG gas production plateau by an additional 1.5 years, with a focus on booster condensate pumps and compressors. ·       Conducted fire incident case studies involving rotating equipment at PETRONAS plants, identifying detectable symptoms and key monitoring parameters for future incident prevention. Renewable Energy: ·       Designed and modelled a biomass-based Combined Heat & Power (CHP) unit for commercial buildings, demonstrating cost-effective carbon reduction through HomerPro feasibility analysis ·       Engineered a 6.5 MW Horizontal Axial Wind Turbine blade design using Qblade software, optimizing for maximum power generation efficiency ·       Led design team for utility-scale Wind and Solar Hybrid Renewable Energy System, incorporating Sustainable Development Goals (SDGs) and achieving 85% renewable energy penetration ·       Performed detailed site analysis for wind farm implementations using WindPro, optimizing turbine placement for maximum energy yield ·       Design and installation of Grid-Connected Photovoltaic (GCPV) systems for residential and commercial applications. ·       Comprehensive site assessments, including shading analysis and load profiling, to optimize system design and layout. ·       Selection of photovoltaic (PV) modules and inverters, ensuring design efficiency and cost-effectiveness. ·       Performed single-phase electrical wiring and system integration in compliance with safety and regulatory standards. ·       Installation and assembly of PV system components, including mounting structures, modules, inverters, and protective devices. ·       System testing, commissioning, and performance verification to ensure operational readiness. ·       Maintenance support and troubleshooting for underperforming systems, implementing corrective actions to improve efficiency. ·       Full compliance with Malaysian Standards MS 1837:2018 and MS 2692:2020 throughout design and installation stages. ·       Certified SEDA Malaysia GCPV Systems Design, applying advanced skills in sizing, system layout, and regulatory alignment.

Engineer

HSSE Manager | HSE Engineer | HSE Specialist | HSE Training Coordinator Bach, Degree in Industrial Engineering. An HSE visionary & leader, having 20+ years of rich experience in providing management, leadership and technical oversight for Health, Safety, and Environmental initiatives for multi-million USD Construction/Projects, Plant Operations/Facilities Operation, Security, Production Facilities and Power Plants. Enabling organizations to become their best through HSE process optimization and improvement. Drove project safety excellence as well as optimization and execution methodologies.

Manager, Superintendent, Engineer

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

Highly experienced Electrical Engineer with 24 years of expertise in Conceptual Design, Pre-FEED, FEED, Detailed Engineering Design, EPC, Project Management, and Field Construction within the Oil & Gas industry, encompassing both Offshore and Onshore Projects. Proven ability to lead and coordinate engineering teams, optimize design for efficiency and safety, and ensure project deliverable align with specifications and international standards.

Engineer, Drafter / Designer

- 22 years industry experience in engineering, construction and project management in multi-cultural and challenging environments. - Proven experience and achievement in Oil & Gas greenfield/brownfield onshore and offshore projects, civil works and buildings, power plant, logistics and agrifood industry, air traffic control facilities. - International experience from small to large scale projects within different types of organizations such as operating, engineering and construction contractor companies, joint ventures.

Engineer

Detail-oriented Mechanical Engineering graduate with 2 years of experience in the oil and gas industry, specializing in Asset Reliability, Availability, and Maintainability. Proven track record of contributing to Turnaround and Inspection teams, with hands-on involvement in asset integrity, corrosion management, and regulatory compliance. Strong technical skills, paired with a problem-solving and analytical mindset, allow for effective decision-making in fast-paced environments. Passionate about continuous learning and eager to contribute to dynamic engineering teams that drive operational excellence.

Engineer

I worked in quality assurance and quality control for 20 years, I have developed a keen eye for detail and a strong understanding of quality control processes. My experience includes Oil & Gas, Pipeline, power, shipyard as Quality Lead Engineer, Coordinator and Manger.

Inspector, Manager, Engineer

Possessing more than 10 years of professional experience in Engineering and Construction projects as Piping Engineering specialized in Piping Materials Engineering. Experience in National projects for oil and gas, refinery, fertilizer, industrial & building service. Comprehend with project management, EPC project flow activities and familiar with engineering code and standards. Responsible in preparing and reviewing piping documents include datasheet, calculation and drawing, supervising engineering and construction phase, providing technical assistance and risk management analysis. Excellent experience with Smart Plant Material software, Piping Bill of Material Software, Spool Drawing Software, Control Joint Software, and Material Control Software. A hard-working and multitasking person thrives on a challenge and works equally as well individual or as part of a team. Strong engineering professional with a Bachelor's degree focused in Metallurgical and Materials Engineering from University of Indonesia.

Engineer

• More than 15 years experiences in oil & gas /or related industries in QA/QC Department. • Understanding on welding, static equipment, structure inspection, piping, NDT inspection/ tool/ method and corrosion monitoring. • Familiar with the relevant drawing and another relevant international code & standards (API, ASME, AWS, BS, JIS, DIN, etc)

Inspector, Supervisor / Technician

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

Dedicated Process Project Engineer specialist with 5 years of experience in oil & gas, waste gases recovery system, and process industry. Knowledgeable Process Engineer leads projects to optimise processes and products. Exposures to multi-disciplinary engineering teams for greenfield and brownfield development projects. Demonstrates focused attention on improving performance through enhancing processes. Keeps well informed of pertinent industry changes and advances. Partners easily with technical and non-technical team members to accomplish shared goals.

Manager, Superintendent, Supervisor / Technician

Over 6 years of experience in QA/QC Inspector (Welding/Piping/Structural) in the field of Oil and Gas Fabrication such as Offshore Wellhead Platforms, Subsea Modules & Foundation of Production Manifold, Production SSIV, Export PLEM, HUB SSIV, Deep Water SDU, Shallow Water SDU, ROPL, Suction Pile, Production FTA, MEG Pipeline FTA, Rigid Spools, etc. Earning bachelor’s degree in majoring Metallurgical Engineering and diploma degree in majoring Mechanical Engineering and certified CSWIP 3.1 (Welding Inspector), CSWIP RI Level 2, ASME VIII Division 1 Pressure Vessel, Feritscope FMP30, SonoDur 3 Portable UCI Hardness Tester, XRF Analyzer for Positive Material Identification. Avidly interesting in QA/QC Inspection for Welding/Piping/Structural with experiences inspection prior to welding, during welding and after welding such as checking preparation of base metal before welding, fit up inspection, checking parameter during welding, visual inspection after welding including checking discoloration inspection using Borescope, Hardness Test, Ferrite Test and PMI. Also having experience to witness Mechanical Testing, Metallurgical Testing, Metallography Examination, Chemical Composition, and Corrosion Testing (i.e. Sulfide Stress Corrosion Cracking based on NACE TM0316, NACE TM0177, Pitting Corrosion based on ASTM G48 Method A, Intergranular Corrosion based on ASTM A262 Method E) for Welder / Welding Operator Qualification Test, Procedure Qualification Test.

Inspector

 I trust this message finds you in good spirits. I am writing to express my genuine interest in the Project/Construction Engineer/Material Coordinator position and other relevant roles within your esteemed organization. My enthusiasm for the role is matched by a willingness to relocate or work internationally, driven by a desire to immerse myself in diverse work cultures and expand my professional horizons. My career path includes a substantial foundation in project management, asset coordination, and material management specifically within the oil and gas sector. Here's a concise overview of my pertinent experiences: Professional Highlights: Piping Construction Engineer (MMHE/Sapura Energy/MIE Industrial): Projects: 1.  EPCIC of CPP KASAWARI Gas Development Project, Petronas Carigali 2.  EPCIC of Integrated Central Processing Platform (ICPP) PEGAGA, Mubadala Petroleum 3. EPCC of B7IN INTEL Falcon Project, K005 Mechanical & Piping Works ·   Managed EPCIC projects for gas development, ensuring adherence to stringent standards across the project lifecycle. ·  Supervised piping installation, hydrotesting, and reinstatement activities, optimizing material delivery schedules for improved project efficiency. Material Management Engineer (Sapura Energy): ·  Effectively governed material databases, efficiently tracked deliveries, and ensured timely supplies by fostering collaboration between warehouse and quality departments. ·  Strategically coordinated material movements, expediting inspections and meticulously maintaining comprehensive reports for streamlined management review. SAP Material Cataloguer (Mecip Global Engineering): ·  Spearheaded the cataloging of equipment parts and managed BOM entries in the SAP system for pivotal plant modification projects, guaranteeing precise data alignment. Education & Proficiencies: Bachelor of Science (Hons.) in Industrial Mathematics: Actively participated in extracurricular activities, demonstrating strong leadership qualities. Language Proficiency: Proficient in spoken, written, and listening skills in both English and Malay. Compliance and Skills: Possesses industry certifications, excels in site engineering, project management, material coordination, piping construction, safety compliance, and proficient database management. I am enthusiastic about the opportunity to discuss how my diverse skill set and experience could bring value to your team. Continuous learning and personal development are values I hold dear and am eager to apply in a new role. For your convenience, I have attached my application package and remain available for any queries at +601-11026 2405 or via email (hadiomaq@gmail.com). Thank you for considering my application. I am eagerly looking forward to the possibility of contributing to your team's success.

Engineer, Supervisor / Technician

Highly motivated and enthusiast person who seeks new working experiences to improve my skills. Experience as Laboratory Technical Engineer for Welding Procedure Qualification, Welder Qualification & Material Verification Test, familiar with code/standard of welding inspection, procedure.

Inspector

Piping Designer with 6+ years of experience in the Oil & Gas industry. Skilled in AutoCAD 2D/3D, AutoCAD Plant 3D, and 3D modeling. Strong knowledge of piping design, drafting, and field measurement, with hands-on exposure to SmartPlant 3D (SP3D), AVEVA E3D, AVEVA PDMS, and CAESAR II. Holds a Bachelor’s degree in Mechanical Engineering from Mercu Buana University. Technical Skill: AutoCAD 2&3D AutoCAD Plant 3D AVEVA PDMS AVEVA E3D (Everything 3D) Smart Plant 3D (S3D) Piping Stress Analysis (Software Caesar II) Sketchup Microsoft Office: Excel, Word, Power Point Drone Pilot (Certified) Languange : Indonesian and English

Drafter / Designer, Engineer, Other

> 20 years experience in ofshore, subsea & pipeline including deep water experience in oil & gas across Concept, FEED, Detail Design and EPCI. Familiar with various codes and standards such as ASME, API, DNV and ISO. Experienced in Subsea, Umbilical, Riser, Flowline (SURF) expertise, subsea field development involving various subsea production, control, distribution system, umbilicals, risers and flowlines.

Engineer, Manager

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Turnaround planner 13 years of experience in leading oil and gas companies. Primavera and SAP.

Engineer, Other

Hello, Irfan's here. I am a metallurgical/process engineering, specifically in extractive metallurgy. I graduated from Institut Teknologi Bandung for my bachelor degree and Colorado School of Mines for my master's degree, both in metallurgical engineering. I worked at the biggest steelmaking in Indonesia for 3 years before moving to the biggest grinding media producer in the world. I had an opportunity to do an intern as a metallurgist at Freeport McMoRan, Morenci Operation, Arizona, USA after I finished my master degree. I'm a passionate engineer, eager to learn, and always strive to do better. Let's get to know each other better!

Engineer, Superintendent

Organized, driven, and ambitious young professional with outstanding attention to detail and a thirst for knowledge who wants to work closely with experienced engineers and contribute to the development of a dynamic engineering company. Offering a degree in Mechanical Engineering and over 2 years of work experience in reliability and inspection department, seeking an entry-level engineer permanent position.

Engineer