Package freelance

● Mechanical equipment, process engineering and material handling equipment knowledge. ● Total 15 years of working experience in engineering of mechanical equipment for offshore platform Oil and Gas industries, FPSO Topside equipment and Power plant industry. ● Experience work together with commercial team, QA/QC team, logistic and construction engineer in EPCC company. ● Working experience inclusive of FEED, Pre-bid engineering, and detail engineering. ● Attend Factory Acceptance Test. ● To reply Site technical query or provide support at site if required. ● Equipment knowledge covering static, rotating and packaged equipment e.g., Gas turbine driven equipment, pumps, lifesaving appliances, screw compressor, filters, packaged equipment etc. ● Experience of dealing with many EPC Contractors and equipment Vendors. ● Familiar with International Codes and Standards and wide range of client's specification, ● Knowledgeable in interdisciplinary activities for the integration of packages / equipment. ● Experience working with global team.

Engineer

A professional equipped with intermediate level of experience for engineering design in oil and gas as well as manufacturing industry. Seeking a career opportunity in engineering field which enables me to develop my potential, knowledge, skills while carry out my responsibilities and assist company to achieve its goals.

Engineer

•Total 24 Years •3 years in Pump industry •6 years in Auto industry •15 years in Oil & Gas industry •Project Management •Construction Management •Hook Up & Commissioning •Wind farm Jacket ü Understand the scope of work to be executed and prepare procedures and policies are in line with project scope of work. ü Identify & mitigate the construction issues in design phase. ü Monitor the construction progress Structural & Piping on a daily/weekly/monthly basis & provide reports to the Project Manager. Ensure milestones are understood & are being met. ü Carried out fabrication, execution & installation of onshore pipeline for Bul Hanine project in Halul Island, Qatar with subcontractor Galfar. ü Carried out hydrotesting, gauging, pigging for Bul Hanine Project in Qatar with subcontractor TransAsia pipeline. ü Carried out N2- He leak testing with subcontractor TransAsia pipeline. ü Perform golden joints in splash zone area with proper precaution and necessary arrangement ü Preserved the pipeline with nitrogen at 2 bars. ü Performed dewatering activity inside the sea with proper arrangement and necessary approval taken from environment ministry. ü Carried out intelligent pigging with proper coordination of vendor Rosen ü Commissioning of all equipment's and instruments with team members ü Successfully changeover the pipeline from 20” to 16” and handover the line to production with proper shutdown (SIMOPS). ü De-cruding the existing 20” line with proper chemical by proper coordinating with vendor and client ü Preserved the existing 20” pipeline with less than 15 ppm with 3 bar and handover the line to client for observation ü Completion of fabrication in accordance with the scope of work, contract specifications and requirements. ü Approve bid tabulations for all major purchase orders. ü Directing work to sub-contractors, supervising & evaluate contractors claims & make recommendation to accept/reject/negotiate & prepare final VO submissions for approval. ü Project risk identification and risk response planning. ü Utilized the Earned Value Management (EVM) for performance analysis and forecasting. ü Preparation of list of hook up material & work pack for hook up activity. ü Proper coordination for spool fabrication, erection, painting, testing, leak testing, flange management, heat tracing, insulation & preservation ü Leading the Hydro test meeting on daily basis for better planning. ü Raise material requisition for consumables as well as commissioning items and maintain record. ü Raise technical query to client for any unclear information on drawing / specifications & unfeasible task in the field. ü Planning of resources, material procurement, fixtures required for production & transportation of the job. ü Maintaining critical projects documents like MTO, sub-contractor register, additional work register etc. ü Coordination/organizing meetings with Client, Vendor & Sub contractor. ü Report and take remedial actions on schedule slippages. ü Check impact of deliverable delays on project schedule and advice Project Manager. ü Maintain functional links with unit heads in the project viz, Engineering, Planning, Quality, HSE, Production, Accounts, Procurement, Quantity Survey, Admistration etc. ü Provide input into the scheduling of projects, which meets the client required date & maintain resources to acceptable level. ü Captures lessons learned, communicates lessons to other project teams and implements lessons learned in future project planning ü Coordinate with different vendor for different activities. Name of vendors are ACT, APS, Unique Wellube, SLM, Claymore, Al Swiss, PEMCO, Lloyds Register, RDC, Mifab, Nash, Chalmers, Axist, Lobster television etc. ü Project Material Reconciliation at L&T Sohar, Oman Yard & Jebel Ali Yard, Dubai. ü Participate in Weighing & Load Out activities. ü Shutdown projects handled in Oxy Oman, Dewa, HPC Bahrain, Sewa for retubing, lance cleaning, GT coil installation, etc… 

Manager, Superintendent

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

B.Sc degree (Mechanical Engineer) Offshore Drilling Systems Rig ( New-Build/ Survey/ Inspection/ Refurbishment/ Modification/ Classification ) Engineering, Procurement & Installation Supervision (Mechanical/Piping) NORSOK / DNV / API International Projects SINGAPORE, Middle East & Caspian-Sea Shipyards (Owner/ Contractor team) Norway Work Permit Available for job Worldwide Relocate / Rotation

Superintendent, Engineer, Inspector, Manager

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

I have over 15 years of experience in the Oil & Gas industry, with 10 years specifically in Material Management and 5 years in various engineering positions. With a strong combination of enthusiasm, adaptability, and effective communication skills, my aim is to contribute to a company's success by utilizing my expertise in achieving effective results.

Engineer, Inspector, Superintendent, Supervisor / Technician

Adib Sofwan is a highly skilled Engineer with 7 years of experience in the construction and oil and gas sectors. He has a proven track record in project management, leadership, communication, and planning, particularly in the execution of mechanical static and package equipment. Adib is well-versed in international standards such as ASME, API, FEM, BS, EN, PetroBras Standards, and PETRONAS Technical Standards (PTS). He has successfully collaborated with esteemed clients including Petronas, PetroBras, Sapura Energy, Dialog, and Top Glove. Adib possesses extensive hands-on experience and proficiency in utilizing Solidworks and AutoCAD for designing safety catch net systems, shoring supports, and 2D and 3D access scaffolds. He is now actively seeking a dynamic role where he can work closely with senior management, further develop his technical skills, and expand his knowledge in project management around the world.

Engineer

Greetings!! Briefly, I am Ashish Shrivastava, Independent Engineering Consultant (with group of freelancers) core being Piping stress with 15+ years of experience. I have done wide range of stress analysis in different sectors like Offshore/onshore, Marine, LNG/LPG, Petrochemical, Solar/ Thermal powerplants.    I take turnkey projects of pipe stress analysis  My client list has MNCs names like KBR, Technip energies, RINA-SPA along with long list of startups and small companies.  I would be happy if you can consider my profile for pipe stress analysis work that would like to outsource. I assure you this will help you reduce schedule and cost by 40%.

Engineer, Manager, Superintendent

Onur is an experienced oil and gas, heat exchangers, pressure vessels, static equipment, and packages engineer and engineering manager with 20 years of international experience and very good project track in FEED, EPC, PM especially for Oil & Gas, Energy and chemical projects including also grassroots, revamp and de-bottlenecking phases. Supervises and coordinates engineering activities thermal and mechanical design, preparation of material requisitions, datasheets, engineering drawings, vendor follow-up, vendor calculation and drawing check. Supervises and coordinates engineering activities, technical bid evaluation and procurement activities of equipment and vendor expedition. Coordinates project execution, manhour expedition and estimates, engineering activities and budget. Follows-up and coordinates PMC company activities.

Professional Profile Experienced Design/Drafting Piping/Process/Process Safety for Design Competition, FEED, Detail Drawing using Auto CAD/ MicroStation for Oil and Gas Onshore/Offshore and Petrochemical Project. Several times working for Prepare data material to input CQS system. Piping Quality Control, Piping Inspector, Piping test package/Punch List at fabrication and Field Construction Career Objective I am seeking a position which will allow me to apply and enhance my skills of being SP3D Designer Piping Process/Process Safety, Piping. But it does not rule out the position of the piping test package/punch list because I have that experience. In addition, I am eager to contribute my knowledge, experience and hard work towards the success of your company and to the growth of the fast-developing field.

Drafter / Designer, Inspector

"To utilize my technical skills for achieving the target and developing the best performance in the organization. I would like to implement my innovative ideas, skills and creativity for accomplishing the projects"

Engineer, Manager, Superintendent, Other

- 22 years industry experience in engineering, construction and project management in multi-cultural and challenging environments. - Proven experience and achievement in Oil & Gas greenfield/brownfield onshore and offshore projects, civil works and buildings, power plant, logistics and agrifood industry, air traffic control facilities. - International experience from small to large scale projects within different types of organizations such as operating, engineering and construction contractor companies, joint ventures.

Engineer

I'm an experienced mechanical and control system design professional Engineer with 15 years of relevant design experience. I have excellent mechanical product and control system design expertise, including the complete product lifecycle from initial concept to project delivery.

Engineer

Results-driven Mechanical Engineer with 17 years of experience in the oil and gas sector, specializing in static, mechanical package equipment and engineering design assurance. Adept at project execution, risk assessment, and vendor coordination, with a proven track record of delivering complex engineering solutions for major oil and gas projects. Strong analytical skills, excellent teamwork, and a commitment to continuous improvement.

Engineer

20 years of experience in Instrumentation & Controls and SURF. Specialized in Engineering Design including Concept Select, FEED and Detailed Design. Participate in all project development cycle including Assembly & Testing, Fabrication & Construction and Hook-Up & Commissioning for Topside, Floater and Subsea project.

Engineer

Dedicated, high-management standart, talented and result oriented professional to apply hands-on experience in process engineering & field expeirence (pre-commissioning & commissioning engineer). Learning on the Fly, Problem Solving, Intellectual Horsepower, Written Communications, Drive For Results, Decision Quality, Informing, Listening, and Dealing with Ambiguity. Intermediate knowledge of engineering design principles and applicable design guides and standards related to assigned engineering discipline.

Drafter / Designer, Engineer

A Project Management Professional with 9 years experience handling both onshore and offshore projects throughout the project life cycle from Front End Loading until Commissioning and Handover.

Engineer, Manager

Over 20 years of experience as a mechanical and piping engineer in multi‐projects of the Oil and Gas, Power Plant, MEP Building and industrial sector from Pre‐FEED,

Engineer

My experience in EPC company is about 13 years. My strength is on Engineering Design and Inspection, mostly Static, Rotating & Package Equipment and Piping material. I’m familiar with PID, Process Flow Diagram, Mechanical Datasheet, Technical Specification, Technical Bid Evaluation, Strength Calculation, Pipe Stress Calculation, Piping Plan etc. I also familiar with Code & Standard such as API 620, API 650, ASME VIII Div. 1 & Div. 2, ASME RTP 1, API 610, API 598, ISO 9906, ANSI/HI 9.8, ASME B31.3 , ASME B31.4, NFPA 20, API 2510

Engineer

* I have almost 14 years of diverse experience in FEED/detail engineering as well as maintenance sector. This gives me unique edge of understanding the aspects from maintenance side as well as design side which can benefit client in achiving overall reliability.

Engineer

Results-driven project and fabrication manager with over 10 years of experience in the oil & gas, green hydrogen, and petrochemical industries. Specialized in site supervision, fabrication execution, and cross-border project coordination. Proven track record of managing multi-million-dollar fabrication projects across China, Vietnam, Singapore, and Malaysia. Skilled in project planning, stakeholder communication, and quality compliance to global standards (ASME, API, EU, AS/NZS).

Manager, Supervisor / Technician

Construction Manager, with multidisciplinary management background, excellent communication, organisation and co-ordination skills. Focused on ensuring timely, safe, cost-effective design and implementation during the life cycle of projects from conception to delivery.

Dedicated and detail-oriented Mechanical Engineer with 7 years combined experience as a Design Engineer, Project Engineer and Executive Piping Maintenance Engineer. Extremely interested in seeking opportunities and challenges at a new company to further develop my skills. With outstanding problem-solving skill coupled with solid project management expertise, I believe that I can make a significant contribution to the team and company itself.

Engineer

●Engineered/Constructed/Commissioned 250+projects worldwide: 150+ small $1-$10 million; 75 medium $10-$99 million; 16 large $100-$900 million; & 10 mega-projects of $1 to $24 billion. ●Successfully Managed – Up to 30 concurrent projects. ●Licensed Professional Engineer: California & Alaska, can be licensed anywhere worldwide by comity. ●Education: BSME from University of California, Berkeley (always in the top 5, worldwide). ●Upstream Oil & Gas: 36 Oil & Gas Production / Separation / Reinjection / Shipping Facilities; Sealift modules to 2,600T/2320mT; 100s of Drillsites / Truckable Modules to 40T/36mT; 4000mi/6400km of Gathering / Injection Lines up to 60”/1500mm x 740psig/50barg and 24”/600mm x 3,280psig/221barg. ●Midstream Oil & Gas: 18,260mi / 29,216km of Transport Pipelines. Diameters to 60” / 1.5m & pressures to 5230psig / 361barg. Largest: 48” / 1.2m x 1180psig / 80barg x 800mi / 1280km and 40” / 1m x 1480psig / 100barg x 2400mi / 4000km (onshore, offshore, oil, gas, products, CO2, batching, spiking, conversions, reversals)., 75 Pump Stations; 45 Compressor Stations; 100+ Meter Stations; 3 underground gas storage plants; 11 major Terminals (marine, pipeline, railroad, truck, piers, loading arms, AFFF, recycle pipelines, fixed & floating roof tanks to 500,000bbl / 60,000cm, gas storage bullets and spheres). ●Downstream Oil & Gas: 6 Refineries (including 2 majors $3.5B & $1.5B; 30 concurrent turnaround projects), 1 Gas Plant; 20 retail gasoline / diesel / lubricant / LPG stations; 4 distribution centers. ●BU Power Plants Combined-Cycle CoGeneration: 40 to 50 MWe backup power plants as part of larger projects. ●BU Power Plants Diesel: 150+ 0.25 to 4.5 MWe backup power / remote main power plants as part of larger projects. ●Power Plants Solar: 300+ 0.25 to 2.5 MWe off-grid valve & meter station power as part of larger projects.

Manager