Package freelance

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Greetings!! Briefly, I am Ashish Shrivastava, Independent Engineering Consultant (with group of freelancers) core being Piping stress with 15+ years of experience. I have done wide range of stress analysis in different sectors like Offshore/onshore, Marine, LNG/LPG, Petrochemical, Solar/ Thermal powerplants.    I take turnkey projects of pipe stress analysis  My client list has MNCs names like KBR, Technip energies, RINA-SPA along with long list of startups and small companies.  I would be happy if you can consider my profile for pipe stress analysis work that would like to outsource. I assure you this will help you reduce schedule and cost by 40%.

Engineer, Manager, Superintendent

"A steady stream and self-control will harness curiosity and passion"

Drafter / Designer, Engineer, Inspector

Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides

Engineer, Manager, Inspector

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Results oriented International Supply Chain and Procurement professional with specializing in contracts and Bids, Revenue Recognition, Process Improvements, Bid Analysis, and SAP MM and R/3 modules. Efectively able to evaluate contractual claims and ensure technical compliance with agreements and deadlines. Skilled in working with cross-functional teams in time sensitive environment. Propensity for learning new concepts quickly, organizational ability to adjust and prioritize additional workloads, and capacity for creating a unified work environment through efective leadership and communication.

Engineer, Manager

Electrical engineer with more than 12+ years of experience at Oil & Gas sector. Familiar with PTS, IEC, EX requirement on electrical package. Experience with Detail Design Engineering, Electrical inspection, Construction, Pre-commissioning & Commissioning. Has involve in EPCC, PCC, Brownfield, and Greenfield & Hook-up Commissioning.

Engineer

Well organized and motivated piping engineer with a demonstrated ability to work in high stress condition, skilled individual with experience over 10+ years in engineering design of piping/ pipelines. Handles various projects including piping for power plant, industrial, chemical and oil & gas industries.

Engineer

Ø Seventeen Years of combined Piping Engineering Experience (Project Engineering, Package, Supervision, Design, Quality Control and Drawing Detailing) Ø Conversant in 2D Microstation Software Ø Conversant in PDS 3D Modeling Software for Piping and Equipment Ø Conversant in PDMS Modeling Software for Piping and Equipment Ø Conversant in SMART Plant Review (SPR) Ø Conversant in Navis Works Ø Conversant in E3D Software Ø Conversant in MS Office Applications (Word and Excel) Ø Knowledgeable in Engineering Applications (AutoCAD R2004-R2007) Ø Adept in oral and written English  

Engineer, Drafter / Designer

I am an experienced engineer with up to 15 working years in Project, Technical and Construction disciplines. I have been involved in large-scale Energy Projects (Oil & Gas and Power Generation) with the Project Team. Experience with Multinational Corporations (MNCs) has developed my technical knowledge, management skills and intra-personal attributes. Throughout my professional role as Lead Engineer at GE, my mission is to steer complex EPC projects to success. The leadership role in the APAC region has honed my skills in ensuring the fulfillment of project expectations. I am looking forward to seeking senior positions related to Project Management and Technical to deliver positive results with performance-oriented organizations.

Engineer, Manager

Having solid experience in M&E and Project Management in various industries such as Port & Terminals, Kernel Crushing Plants, Palm Oil Mills and Industrial Pumps.

Engineer, Supervisor / Technician

My name is Ekni Han Bin Abd Rahman. I am a multi discipline Professional. I have been involved for over 20 years in oil and gas industries consist of  1. Onshore LNG Process facilities , 2. Offshore process & utilities facilities at ( Platform /Island /FPSO/MOPU ) 3. EPC companies. General Key abilities : · Energetic work ethic and detail-oriented. · Motivates Team members. · Able to Supervise , manage & Coordinate works · Able to bring competitive & positive work Environment at work place. · Able to work in multicultural working environment. ·Understand the important of Communications and Team work at difference level / parties. ·To ensure task given in good progress and completed on time. · Proven Experience & expert in Coordination of Construction activities in Brownfield area. · Abilities to Lead and meet Client expectation (Time Frame) of work activities as per Instructions and target. · Specialize in monitoring and contribute information cross department during Construction Project phase , · Keep All Parties from ( Client / EPC / PMT) at the same page toward job completion Production/Operation Key Abilities · Familiar and understand work Instructions, work procedure, Permit to Work system, Fire Fighting System (Fields and Panel) and Housekeeping. · Expert of plant Operations (Panel and Fields ), Normal Operation & Troubleshooting. · A wide ranges of experiences in Pre-commissioning, Commissioning stages, Normal Operations, Start-up and Shutdown) · Provide , Coaching, Mentoring &Training (Field & DCS) for Operation team members . ·  Experience in process control & field troubleshooting.      

Supervisor / Technician, Other

Senior Maintenance Engineer with 10 years' of experience in Oil & Gas Industries specifically in Rotating Equipment and Equipment Reliability. Constantly ensuring high equipment availability and strive for minimum equipment downtime by performing proper planning and execution with safety as the first priority. In addition, led Root Cause Failure Analysis (RCFA) investigation, Management Of Change (EMOC) & managing financial budgeting. My main responsibility as a rotating engineer is to reduce likelihood of emergency/unplanned maintenance in which causes downtime & delay in production target.

Engineer, Manager, Other

With kindly i would like introduce myself to join in your company as QA/QC Engineer My name is Muhammad Syahril ST. I have certificated and qualified as Welding Inspector & ASNT NDT Level II ( RI, UT, MT & PT ) . I enclosure my curriculum vitae on attachment file. I hope to hear from you if have an opening job with my qualifications.

Engineer, Manager, Inspector

Having 14 years of experience in For Refinery(RCC Pertamina RU VI), Power Plant(Coal Fired Suge Belitung, Mobile Power Plant Banda Aceh), Petrochemical(Sriwijaya Fertilizer, Banggai Amonia Plant), Geothermal (Lahendong Geothermal), FPSO(Feed Inpex Masela FPSO,Inpex Ichthys FPSO, FPSO Petronas 1), Well Head Platform(Tutung Platfotm, OO-OX Platform), LNG Plant(Donggi Senoro LNG,FEED Malaysia LNG Train 9) projects in FEED, detailed engineering design and construction support, as Senior, and Engineer in Mechanical Static and Piping Pipeline Engineering design (Offshore and Onshore Project) Pre-Service, and In-Service (Greenfield and Brownfield), with a variety of projects in Oil and Gas Industry. Experience working with National and Multinational Company for Oil and Gas Company (Client-side), EPCI company (Contractor) and Engineering Consultant Company. Mechanical Piping engineering expertise/experience includes the following: •        Piping Stress Analysis and Piping Material of fixed offshore platform, and Floating Offshore ,Refinery, Power Plant,Pertochemical and Geothermal, LNG Plant for feasibility study, conceptual, basic engineering, FEED, detailed design, and EPC/EPCM projects. •        Mechanical Engineer For Static Equipment(Pressure Vessel, Pig receiver, Reactor, Flare Stack, Regenerator, Orifice Chamber,etc), Rotating Equipment (Pump, Compressor, Turbine), Package Equipment(CO2 Snuffing Package, N2 Package, Crude Oil Crude Oil Stabilization Package, Dilution Water Package, Produced Water Treatment Package, Chemical Injection Package) •        Experience in detail engineering and EPC project for mechanical and piping analyses of offshore structure (jackets and topsides) for Green Field and Brown Field Project during in-service and pre-service conditions such as in-place analysis, seismic analysis, fatigue analysis, lifting analysis, load-out analysis, and transportation/tow analysis. Detail design through local checks that covered connections, supports member strengthening, plate design, etc. Review of Design Drawings and Shop Drawing and coordinate interdisciplinary engineer tasks in the detail engineering stage. •        Reviewed, provided necessary recommendations, and approved EPC Contractor both offshore and onshore Greenfield and Brownfield Mechanical Piping engineering-related deliverables (Calculation, Drawings, and 3D Model). Providing and consolidating Company comments for the associated discipline in respect to the detailed design of onshore and offshore for Pre-service & in-service analysis, Pipe supports, Equipment supports, foundations, etc., during the EPC phase to ensure the Offshore Platform scope of supply is engineered, designed, and integrated to the overall project design and is consistent with project requirements. •        Prepared Material Take-Off (MTO) and Preparation of RFQ (Request for Quotation) and Technical Bid Evaluation (TBE), Commercial bid evaluation, clarification, reviewing vendor documents, and selecting qualified subcontractor at Procurement stage for Piping material. •        Attended Regular Internal, External, and Kick of Meeting (KOM), HAZID and HAZOP meetings, construction review meetings, coordination, and technical meetings with the internal project team, vendor, and subcontractor. •        Has strongly knowledge in the engineering/design, especially the piping material selection, piping components, pipe support, stress analysis, corrosion/erosion, painting, welding, QA/QC, construction, PDMS and piping codes & standards •        Familiar with piping design code and standard and related software e.g. Caesar •        Extensive experience in detailed equipment layout design, 3D model review incorporating piping design, operation and maintenance requirement. •        Experienced in engineering, fabrication, pre-commissioning and commissioning of piping component. •        Experienced in high H2S and high CO2 gas contents including the design of CRA material i.e. Inconel,Alloy •        Experienced in high temperature / high pressure (HPHT) facilities •        Having knowledge Carbon Capture Storage Utilities (CCSU) technology. Main Equipment of Carbon Capture Storage Utilities (CCSU) technology are Compressor,CO2 absorber, Coolers, Pulsation dampers and Diaphragm pump

Engineer

Seeking a challenging & rewarding opportunity in an organization of high repute which recognizes & utilities my true Potential work & Ability with my Analytical & Technical Knowledge towards my profession. PROFESSIONAL SYNOPSIS :- As a Mechanical Engineer - Rotating Equipments with 15+Yrs' of experience in the field of MECHANICAL ENGINEERING in Oil & Gas, Petrochemical, Refineries & all Projects from Industrial Engineering Environments in Locations at INDIA,SAUDI ARABIA ,BAHRAIN & QATAR with Good source of Knowledge in Mechanical Field of Engineering.

Engineer, Manager

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

I would like to present my ability in Offshore Process & Piping and Pipeline Design. Have a lot of experience in brownfield engineering and wellhead platform design. First step you should give a chance to brownfield modification project, and wellhead platform projects. I have good ability to review the process/piping design document

Mechanical Engineer with 20 years of experience in Boiler, Furnace and Static equipment Design, Installation, Construction and Pre-Commissioning till Handover to Client. Technical review of method statements for lifting and installation of equipment’s, other procedures as per the client requirement. Review of 3D drawings of overall layout and performed clash check and maintenance integrity by superimposing all other discipline models.

Engineer

Experienced Rotating Equipment Engineer with a demonstrated history of working in the oil & energy industry, especially in the Refinery and Petrochemical Plant Maintenance, FEED and Detail Engineering, as well as the Construction, Commissioning and Completion part of Projects. Held the Vibration Analyst and Project Management Professional Certificate

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

20 years of experience in Instrumentation & Controls and SURF. Specialized in Engineering Design including Concept Select, FEED and Detailed Design. Participate in all project development cycle including Assembly & Testing, Fabrication & Construction and Hook-Up & Commissioning for Topside, Floater and Subsea project.

Engineer

Experienced Engineer with a Bachelor of Engineering (B.Eng.) focused in Mechanical Engineering from Institut Teknologi Bandung (ITB) and Master degree in Mechanical Engineering from Sriwijaya University. Strong experience in the oil & energy industry with almost 13 years working portofolio in Equipment handling, Piping System on LNG Plant, Oil Refinery, Petrochemical, Power Plant, and Mining. Specialized in Construction, Engineering Design, API, ASME Standards, Engineering, EPC, life cycle improvement of equipment, Stock Planning, and Total Cost Ownership of Equipment. I am able to lead /supervise integrated process of Design Review, Fabrication, Erection as Project Interface Engineer which is included in parts of Engineering Design, Procurement Process, Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Specialties: Project Planning, Engineering & Construction. Commissioning New Equipment and Processes. Process Piping and Mechanical Installations. Process Troubleshooting, Maintenance, and Replacement Team Leadership Technical Writer (procedures)

Engineer, Superintendent

I would like to apply my professional resume with experience more than 14 years in EPC & Oil and Gas Project of Piping Designer (AP3D/SP3D/AutoCAD). For this moment I'm currently working in Engineering Procject for PT Mipcon Konsultan Utama starting since January 2018 until present. I'm had been finished for MSM New Turbine Plant Project in Sumba & Jakarta, and my specialist in this sector are piping 3D designer. And pipe modification at PERTAMINA EP SUBANG for piping design & structure platform designer. And for the last of more than 7 years I had been in piping/mechanical, structure designer & draftsman position for any engineering project in Mipcon Konsultan Utama.   I'm sure that I'm qualified and have much experiences for the position. Wish that I'm the one of which company need for. I'm hard worker who can work with the team, English speaking and writing, good for color vision and good in high places. Best wishes that I would get the opportunity and be part of the team.  

Drafter / Designer, Engineer

I am looking for a role that would bring together my extensive experience in quality, health, safety and environment compliance with my dedicated and proven management skills to achieve remarkable outcomes for my employer. My ability to work closely with a range of stakeholders, bringing together their collective knowledge, I am able to manage the successful implementation of integrated management programs of organizations I have been with.

Overall 16 years of working experiences with EPCIC/EPCC project for offshore platform (Modular, WHP and CPP platform), HUC brownfield, onshore refinery/petrochemical (construction & brownfield) and FLNG project for reputable local and international client such as Sarawak Shell, ONGC, KPOC, LUNDIN, Shell Australia and PETRONAS.