Piping freelance

My peers describe me as a sincere individual with a keen willingness to learn

Manager

A bachelor's of Naval Architecture with more than 11 year professional experience as piping engineer at shipyard and piping engineer at oil and gas. I have basic knowledge such as mechanical and piping system, ship design and modeling. Strong analytical skill, team-work, communication skill, be able to work in team player or self-player. Familiar with international codes, standards, and software engineering skill.

Engineer

Result oriented BTech Chemical from ICT, Mumbai with 16 years' experience in Plant Engineering for Oil Gas (both Onshore & Offshore), Pharma, Chemical, Water Treatment and Other Process Industries.

Engineer, Drafter / Designer, Manager

Approximately 3 years experience as a piping engineer in shipyard industry and EC industry. And has been participating in several projects to make sure the schematic drawing and production drawing compliance with the regulation and classification.

Engineer

My name is Bambang Aldhi Satrio Heriyono and I graduated from Institut Teknologi Nasional Bandung with a bachelor's degree in Mechanical Engineering. I have more than 15 years of experience as a QAQC Coordinator/ QAQC Engineer/ QAQC Inspector (with Welding, Mechanical, Piping, Structure and Tank construction activity) in Power Plants, Oil and Gas, and Mining projects and a valid qualification for International Welding Engineer, Welding Inspector-CSWIP 3.1, Welding Inspector-B4T, NDT ASNT-TC-1A Level II of UT/MT/PT, Radiographic Interpreter and Corrosion Inspector.

Inspector, Supervisor / Technician, Other

PROJECT: ZLNG(FPSO), PETRONASH, MALASIYA. • Piping Layout study and 3D Modeling using E3D. • Checking the clashes of designed piping systems by E3D and Navisworks software and presenting the solution. • Reviewing/commenting the vendor GAs. • Generating the piping documents (piping plan, isometric, MTOs) • Participating in technical and model review meetings with clients, • Structural primary/secondary loading info preparation.

Drafter / Designer

Registered Grad Eng. under Board of Engineers Malaysia (BEM) with 7 years of working experience in various downstream EPCC greenfield and brownfield projects (Oil and gas, Petrochemical/Refinery, Construction and Data Centre) in multi-discipline engineering (Civil, Structural, Mechanical, Piping and E&I). Highly proficient in Project & Construction management, Project planning & scheduling, and Project cost control.

Engineer

I'm Rinaldi, 29 years old. I have more than 3 years of experience in an oil and gas company as a structural drawing engineer. My background is a marine engineering graduate. I really enjoy completing new work from start to finish.

Drafter / Designer

* More than 10 years of experience across India, Abu Dhabi, Iraq, Oman, Kuwait & Qatar as Piping Engineer, Piping Supervisor, Construction Supervisor in executing Oil & Gas projects. * Worked on fabrication & erection activities of U/G & A/G piping, CS, SS, LTCS & as in live and new plant. * Worked for Piping, Structure, Equipment, Cladding and all Mechanical related work. * Proficient with Eng. codes & specifications like ASME B.31.3, B.31.1, ASME-16.5 NACE standards * Rich experience of preparing piping related drawings like isometric, general arrangement, P&ID, pipe support drawings, plan, plant smart viewer (3D) and structure drawings * Perform piping Line Check and writing punch list then carrying out A punch clearing work prior to hydro test. * Supervised & led teams, allocated work profiles, prepared various reports and reported to the management & client. * Successfully led completion of projects MEGA TURN AROUND 2021 EP1 Machine Replacement Shutdown Project (QAPCO) Mesaieed, Doha Qatar, Kuwait New Refinery Project Package-5 Al-Zour (KNRP) Kuwait, Sohar Refinery Improvement Project (SRIP) Oman, Central Processing Facility (CPF) Badra Oil Field Iraq, Asab F F D Project Abu Dhabi (UAE) * Erection and alignment of fractionation columns, stripper column, sweetening and stabilization column, sour water stripper column and Amine regeneration column, Compressor, Turbine, Exchanger, Condenser, Pumps and Lube oil skid. * Erection and alignment of flare HP and LP knock out drums, slag catcher, water draw of vessels, electrostatic deserters, stage separators, fin-fan coolers, heat exchangers, purge bins, instrument air and plant air receivers, degassing gas boots, fuel gas scrubber, nitrogen purification vessel. * Supervise for installation of 1.6 KM onshore and 1.7 KM offshore Sulphur Belt Conveyor System including main Conveyor structure, 5 Transfer Tower structure, Magnetic Separator, Elevated Gallery, Ship loader and all Cladding work. * Skilled in executing piping erection, punch listing, hydro testing, and commissioning activities of complete piping system. * Collaborated with cross-functional teams to ensure completion of project. * Excellent communication & interpersonal skills with strong analytical, problem-solving, and organizational capabilities

Engineer, Superintendent, Supervisor / Technician, Inspector, Other

I am a team player who has a very good problem solving and public relation skills

Engineer

Dedicated and results-driven Project Engineer with 5 years of experience in offshore/onshore industry. Adept at P&ID Drawing, Commissioning, and Instrumentation, with a proven track record of delivering high-quality results in challenging and dynamic environments. Possesses a strong background in Process and Piping Services complemented by a solid educational foundation in Degree of Process Instrumentation and Control. Am a strategic thinker and collaborative team player seeking to contribute expertise and drive success in Oil and Gas Company.

Engineer

Profession: 22 years' Experience as a Certified QA/QC Inspector Welding & Painting / Tanks / Piping / Structures / Cross Country Pipelines / Piping Isometric checker / ISO / Pre-Fabrication / Fabrication shop & site / Offshore - Subsea Pipeline / IHUC - Offshore Platform Jacket Installation & Hook-up & commissioning / Offshore wellheads Structure fabrication & Piping skids, NDT Coordinators / PAUT with TOFD & AUT discontinuities analysis & RT Film Interpretation / Punch list Coordinator.

Inspector

Experienced Piping Designer with 9 years designing piping & layout systems for oil and gas projects. Knowledgeable in PDMS, E3D, SP3D, AutoCAD, MS office, and Pipe stress analysis.

Drafter / Designer

CORE SKILLS -         Conceptual Engineering Design, Fabrication Monitoring, Inspection, Installation / Construction Supervision, Project planning, Cost Estimation, Commissioning and Start-Up. Oil & Gas, Power Plant and Mining -         Excellent in using and operates related software for the project such as: Microsoft Office ( MS Word and Excel, Power Point ), Microsoft Project, PV ELITE, COMPRES, AMETANK, STAAD PRO, CAESAR II. PROFESSIONAL SUMMARY -         Having almost 10 years of experiences as Mechanical Engineer in various industries (Power Plant, Oil & Gas & Mining Industries). -         Experienced in preparing and accommodating project requirements from the design stage through to construction and commissioning such as: Calculation documents, Datasheet, TBE, RFQ, Drawing, Procedure, Project schedule and review VENDOR documents. -         Hands-on experience on project equipment design including: Storage Tank, Pressure Vessel, Equipment Skid, and Lifting equipment. -         Experienced and directly involved in supervising construction work including: Installation Boiler and Auxiliary equipment, Installation Steam Turbine and Generator, Sea Water Intake, Fire Fighting system, Balance of Plant, Conveyor, WTP and WWTP. -         Experienced in preparing tender document such as : cost estimation including direct and indirect cost, resources schedule plan, cash-flow plan and construction procedure.

Engineer

Highly motivated Oil and Gas Engineering graduate with over a year of experience in piping and structural project for EPCC (Engineering, Procurement, Construction, and Commissioning) within the Oil industry. Proficient in interpreting ISO and P&ID drawings to ensure accurate and project execution. Skilled in utilizing project management tools such as Microsoft Office, Navisworks, and MS Project to enhance productivity and streamline workflows. Committed to leveraging engineering expertise and technical skills to contribute to the successful delivery of complex oil and gas projects.

Engineer

A performance and result-driven professional Asset Integrity Engineer with a decade of extensive experience, specializing in Mechanical Static, Asset Integrity Management, Inspection, Corrosion, Materials, and Risk-Based Inspection, demonstrating a proven track record of successfully delivering comprehensive Risk-Based Inspection (RBI), Corrosion Management Plan (CMP), Corrosion Design Basis Memorandum (CDBM) and Anomaly Management. Currently, I have successfully developed my own API 581 Probability of Failure (POF) and Consequence of Failure (COF) Level 1 calculation using Microsoft Excel, showcasing my proficiency in the field. I have developed key project management skills and the ability to improve communication with broader project teams, coupled with a profound understanding of Upstream, Downstream, and Marine (FSO & FPSO) aspects of Operations Management.

Engineer

I have experiences in oil & gas, petrochemical construction 20 years in Construction management level 15 years. Preparing construction bidding proposal, selecting sub-contractor candidate each discipline piling, civil (foundation, building, structure), mechanical (static, rotating, package), piping (HDPE, steel pipe), insulation, electrical, instrument and HVAC by CBE (Commercial Bid Evaluation) and TBE (Technical Bid Evaluation) system component. Simulation each discipline bidder and discussing with construction team leader selecting sub-contractor award.

Manager

Highly motivated, self-directed individual and able to work well in a team and able to work under pressure to produce impactful outcome for an organization. Possess strong background in numeracy skills and familiar with multiple Petroleum Engineering software help in solving engineering problems.

Engineer

A person with more than 11 years experiences in Technical Drawing (2D) and 3D modeling as draftsman in various industries sectors in Malaysia especially construction industies. Besides, 5 years experiences in construction Industries as Project Engineer and also have 2 years experiences as site supervisor.

Drafter / Designer, Engineer, Supervisor / Technician

Good team player, vast experience working in more than fifteen countries, able to perform in multirole assignment and wide range of inspection experience

Engineer, Inspector

Within five (5) years experience including multi discipline as Quality Control, Certification Authority Welding Inspector. Non Destructive Examination (NDE) and Document. Multi discipline experience in Structural, Piping & Shipbuilding projects and all related document. Familiar with international codes and specification. Inspection of material such as carbon steel, stainless steel, alloy steel. Familiar with welding process include automatic welding (GMAW & FCAW), SAW, GTAW and SMAW. Familiar with NDT method such as MPT,LPT,UT&RT.

Inspector, Engineer

Prepare and assist implementation of QA/QC function, documents, and deliverables management, by providing support and execution to project and works. Main objective is to ensure, maintain, develop, all QA/QC practices are implemented in accordance with company quality policy and relevant Quality Management System compliance.

Inspector, Engineer, Supervisor / Technician, Superintendent

My name is Wan Fitri Daniel, a Mechanical Engineering Graduate from University Malaya. During my Mechanical Engineering Study, I was exposed with subject such as computational fluid dynamics, mechanics of material for static and dynamic structure and project management which strengthen my fundamental in engineering and project management. During my previous role as a Junior Quality Engineer in Hyoerwave System Engineering, I was experienced in TurnAround project (PCC for PSR-1 CDU-1/CFU Heat Intergration Project (CHIP) MRCSB TA 2024) and achieved mechanical completion on 20/2/2024. In this project, I was mainly developing procedure, coordinating testing and inspection, documenting reports and ensuring all the work done are complying with standard. Transitioning to my current job as Mechanical Design Engineer at GUTOR Electronics Asia Pacific Sdn Bhd, I able to challenge my skills in 3D Modelling while honing my skills in SolidWorks and Creo Parametric as I am responsible for creating 3D Models for North Field Expansion Project for LNG Onshore Facilities. Given my skills and experience, I am confident that I am the best candidate for your company.

Engineer

Result-oriented, meticulous and adaptable mechanical engineer, equipped with extensive operational, maintenance & procurement management skills and 10+ years of professional experience in Oil & Gas Upstream MNCs.

Highly experienced and dedicated QA/QC professional with an impressive track record of over 30 years in the oil & gas construction industry. Proven expertise in ensuring the highest quality standards in project execution and delivery. A strong commitment to safety, compliance, and continuous improvement, resulting in successful completion of numerous projects within budget and schedule constraints. Adept at coordinating with multidisciplinary teams and managing quality control processes to drive operational excellence. Possesses outstanding leadership, communication, and problem-solving skills, enabling effective collaboration with stakeholders at all levels. Committed to achieving organizational goals and fostering a culture of quality and excellence.

Manager