Hire the best freelancers in project for your project
Managed EPC projects
Manager
I’m a Civil Engineer with work experience of 33 years in project management, construction site supervision, detailed engineering and construction of civil works, heavy steel fabrication, load-out, transportation, erection works, offshore installation, heavy lift, brown field works, hook-up and commissioning in oil and gas industries specifically in offshore platforms and jackets, pipe racks, power plants, refineries, FPSO topside and other related works for civil works and steel structures. - Project engineering experience, supervising contractors' execution of engineering design, equipment and materials procurement, module fabrication, transportation, offshore installation, and civil works.
Engineer, Manager, Superintendent, Supervisor / Technician
Dynamic HSE professional with over 16 years of experience in health, safety, and environmental management across diverse industries. Proven track record in enhancing compliance, reducing incident recurrence, and implementing effective safety training programs. Skilled in risk assessment, process safety management, and emergency response planning. Committed to fostering a strong safety culture and driving continuous improvement. Currently pursuing a Master of Science in Process Safety, I am eager to leverage my expertise to ensure safety excellence as an HSE Manager / Senior Engineer / Officer.
Engineer, Inspector, Manager, Other, Drafter / Designer
Experience : An Electrical Engineer in consulting and EPCC environment, undertaking roles of an assigned engineer, team lead, technical lead, independent checker and electrical engineering lead. Over the years I have the invaluable opportunity to successfully lead and deliver complete pre‐project / tender stage proposals, executing conceptual design, detailed design, coordinating and managing stake holders during design stage, FAT, SAT, equipment installation, and power supply application to authority. I have the privilege to be exposed to various industries including oil & gas, railway, water works and infrastructure. My experience to deliver pre‐project / tender stage proposals include producing / reviewing / approving ITB review, clarifications to Owner, preparation of requisitions to procurement, technical and commercial evaluation for selection of Vendors, manhour estimation, technical writeup, preparation of cost summary and preparation of bill of quantities for electrical scope. My hands on experience during conceptual and detailed design stages include producing / reviewing / approving deliverables for power distribution system, building services and layouts, interfacing with various equipment and disciplines, review & approval of power system studies. In addition to design related exposure, I am fortunate to have the opportunity to manage an electrical Team which includes manhour control, progress & coordination meetings, assignment of tasks, KPI setting and evaluation, training, mentoring and developing electrical skills).
Engineer
I trust this message finds you in good spirits. I am writing to express my genuine interest in the Project/Construction Engineer/Material Coordinator position and other relevant roles within your esteemed organization. My enthusiasm for the role is matched by a willingness to relocate or work internationally, driven by a desire to immerse myself in diverse work cultures and expand my professional horizons. My career path includes a substantial foundation in project management, asset coordination, and material management specifically within the oil and gas sector. Here's a concise overview of my pertinent experiences: Professional Highlights: Piping Construction Engineer (MMHE/Sapura Energy/MIE Industrial): Projects: 1. EPCIC of CPP KASAWARI Gas Development Project, Petronas Carigali 2. EPCIC of Integrated Central Processing Platform (ICPP) PEGAGA, Mubadala Petroleum 3. EPCC of B7IN INTEL Falcon Project, K005 Mechanical & Piping Works · Managed EPCIC projects for gas development, ensuring adherence to stringent standards across the project lifecycle. · Supervised piping installation, hydrotesting, and reinstatement activities, optimizing material delivery schedules for improved project efficiency. Material Management Engineer (Sapura Energy): · Effectively governed material databases, efficiently tracked deliveries, and ensured timely supplies by fostering collaboration between warehouse and quality departments. · Strategically coordinated material movements, expediting inspections and meticulously maintaining comprehensive reports for streamlined management review. SAP Material Cataloguer (Mecip Global Engineering): · Spearheaded the cataloging of equipment parts and managed BOM entries in the SAP system for pivotal plant modification projects, guaranteeing precise data alignment. Education & Proficiencies: Bachelor of Science (Hons.) in Industrial Mathematics: Actively participated in extracurricular activities, demonstrating strong leadership qualities. Language Proficiency: Proficient in spoken, written, and listening skills in both English and Malay. Compliance and Skills: Possesses industry certifications, excels in site engineering, project management, material coordination, piping construction, safety compliance, and proficient database management. I am enthusiastic about the opportunity to discuss how my diverse skill set and experience could bring value to your team. Continuous learning and personal development are values I hold dear and am eager to apply in a new role. For your convenience, I have attached my application package and remain available for any queries at +601-11026 2405 or via email (hadiomaq@gmail.com). Thank you for considering my application. I am eagerly looking forward to the possibility of contributing to your team's success.
Engineer, Supervisor / Technician
I communicate effectively towards team / project’s stakeholders and dedicate a fast learning attitude to update latest competencies’ knowledge in order to deliver quality assurance
Inspector, Manager, Engineer, Supervisor / Technician
Seasoned Mechanical Engineer with 20+ years of experience in Oil & Gas, Offshore Construction, and Mechanical Static Engineering. Proven track record in executing offshore rejuvenation projects, managing multi-disciplinary teams, and ensuring compliance with safety and quality standards. Adept at project lifecycle management, technical troubleshooting, and delivering engineering solutions under high-pressure environments.
Engineer, Superintendent, Supervisor / Technician, Manager
Over 13 years’ broad experience in leading from mechanical installation to full cycle pre-commissioning and commissioning rotating & static equipment’s from onshore to offshore of over 20 major brownfield and greenfield platform’s along with FPSO comprises of EPCC, EPCIC, EPCM and PCC projects with set deadlines, budgets along with scopes. Skilled in leading and managing construction & commissioning teams, decommissioning/ make safe of major equipment’s, troubleshooting, generating commissioning test plans, start up, stabilizing till performance test as well as managing mechanical completion systems. Known as a flexible and dedicated professional with solid technical background as well as outstanding time management, interpersonal and multitasking capabilities.
Engineer, Supervisor / Technician, Superintendent
Motivated civil engineer that has interested in field engineering especially project management, civil structure, Quality Assurance and Quality Control (QA/QC) engineer. Experienced & having good capability for more than two years as Site Civil Engineer, QC Engineer, and Project Supervisor.
Engineer, Supervisor / Technician
Civil Engineer with over 12 years of experience in assets development, maintenance and operation for both upstream and downstream oil and gas sectors, hands on experience for engineering supports in oil exploration and maintenance, engineering intervention for production facilities capital projects.
Engineer, Inspector, Drafter / Designer
Licensed Mechanical Engineer with 3 years of hands-on experience in design, 3D modeling, and cost estimation of HVAC systems, plumbing, and other mechanical utilities across a diverse range of building types. These include Advanced Technology & Life Sciences (ATLS) facilities – particulary Pharmaceutical and Cleanroom Environments – as well as Data Centers, Industrial/Manufacturing Plants, Commercial spaces, and Residential projects. Demonstrated expertise in Project Management, with a strong track record of problem-solving and a proactive approach to engineering challenges. Dedicated to delivering high-quality, accurate work that meets both technical and client standards. Skilled in a range of design and modeling tools including Hexagon Smart 3D, Bluebeam, BricsCAD, Autodesk Revit, AutoCAD Plant 3D, Navisworks Simulate, PlanSwift, AutoCAD, Duct Sizer, and Pipe Sizer.
Drafter / Designer, Engineer, Inspector, Supervisor / Technician
• 14 years’ experience as Instrumentation & Control Engineer and Project Engineer role in Offshore Oil & Gas, Chemical, LNG, Power industry, Engineering Design background, graduated from Beijing University of Chemical Technology which is a national key university for “Project 211” in China. • Involved project phases including: Tendering/Proposal, PSR, Concept, Pre-FEED/FEED, DED, Construction, Installation, Pre-Commissioning/Commissioning, Start-Up, etc. • Coordination for Project Engineering & Execution, Stewardship for Vendors and associated FAT/SAT, Facilitation for Procurement and site Construction & Commissioning, Support for Process Unit System Completion: TO, MC and HO, etc. • Steward contractor’s performance, engaging/aligning key stakeholders, engaging discipline engineers and other project resources as required, to complete the assigned scope consistent with the Project Objectives. • Support Procurement to prepare Material Requisition and assess vendor’s Proposal and Quotation, help to expedite vendor’s fabrication to meet project Critical Path requirement. • Engage Project Team and Contractors to verify that the design, procurement and construction is consistent with project requirements and completed within the established schedule. • Actively manage interfaces and ensure adequate engagement between all stakeholders (i.e. Construction, Commissioning, Engineering, Operations, Maintenance, 3rd Party Suppliers, etc.). • Coordinate procurement packages with Contractor and Company Technical Personnel to ensure technical requirements are met and equipment delivery dates support the Project schedule. • Ensure smooth transitions between project stages, across sites and between key stakeholders. Coordinate constructability inputs, project issues resolution, and change requests. • Familiar with Process Control System (PLC/DCS), Safety Instrumented System (SIS), Fire and Gas System (FGS), System Hardware Designing/Modeling, Proficient in Field Instrumentation, Analyzer, Control Valve, Mastered at IC&S Engineering Deliverables, e.g. Index, I/O List, Technical Data Sheet, Hook-up, Cable Routing, Cause & Effect, Logic Diagram, etc., Familiar with Field Engineering, Red Line Mark Up, Site Instruction Sheet (SIS), Quality Control Form (QCF), Advanced Check Sheet (ACS), Punch Closure, DCN Implementation, etc. • Skilled with Office & Graphic Software like: Microsoft Office & AutoCAD & Adobe Acrobat, Familiar with HMI Software like: InTouch, FactoryTalk, Familiar with 3D Model Review Software like: SmartPlant, Navisworks, Familiar with Engineering Design Software like: Autoplant, COMOS, AVEVA, SPIntools. • Familiar with Standards & Codes like: IEC, ASME, ANSI, API, ISA, PIP, etc. • Dedicated, Team-Oriented, Detail-Focused, with Strong Communication and Problem-Solving abilities.
Engineer
Electrical Engineer with 7+ years of experience in the oil & gas and mining industries, particularly in brown field projects involving both detailed engineering and construction phases. Demonstrates comprehensive knowledge of 50Hz and 60Hz electrical systems, including high, medium, and low voltage equipment such as power generation protection systems, switchgear, variable speed drives, soft starters, transformers, motors, UPS, DC systems, chillers, compressors, and power distribution and control systems. Well-versed in international standards including NEC, IEC, ATEX, and IEC-Ex, with hands-on experience in hazardous area classification and equipment selection. Proficient in reviewing and approving technical drawings, calculations, cable schedules, and layouts related to power, lighting, grounding, communication, heat tracing, cathodic protection, and fire & gas systems. Skilled in preparing equipment specifications, data sheets, technical bid evaluations, and purchase requisitions. Brings strong troubleshooting capabilities using a wide range of diagnostic tools including multimeters, oscilloscopes, spectrum analyzers, vibration testers, and meggers. Known for a proactive mindset, strong initiative, and effective problem-solving skills in challenging field environments.
Engineer
🔧 Marine Engineer | Sustainability Strategist | Lubrication Services Leader (APAC & Middle East) 📍 Chartered Engineer | PhD Researcher | Member of RINA, IMarEST, SNAME With over a decade of experience spanning shipboard engineering, marine research, and global technical leadership, I specialize in bridging deep technical insight with strategic innovation. Currently heading Lubrication Services across APAC and the Middle East at The Viswa Group, I lead cross-functional teams driving sustainability, digital transformation, and client-centric solutions in marine lubrication and emissions control. My academic journey—from a First Class B Tech and M Tech in Marine Engineering to ongoing PhD research in Ship Technology at CUSAT—has been anchored in advancing green shipbuilding, delay-time maintenance modeling, and safety systems. I’ve published in international journals, presented at national seminars, and contributed to cutting-edge R&D in scrubber systems and fuel diagnostics. Whether collaborating with shipyards, leading robotisation initiatives, or optimizing lubricant analysis protocols, I bring a systems-thinking approach rooted in engineering rigor and global maritime context.
Other, Engineer, Superintendent, Manager
Experienced Instrumentation & Control Engineer with 18+ years of proven experience in the oil and energy industry. Demonstrated expertise across the full project lifecycle, including Feasibility Study, Technology Selection, Pre-FEED, FEED, Detailed Engineering Design (DED), EPC, Commissioning & Start-Up, Operations - Productions Transition, and Facility Maintenance. Well-versed in delivering integrated solutions from concept to handover, ensuring safety, efficiency, and compliance at every stage. Holds a Master’s degree in Instrumentation Engineering from Sepuluh Nopember Institute of Technology (ITS), with a strong background in both engineering execution and cross-functional project management.
Engineer, Superintendent
HSE Leader
Engineer, Manager
Total 3 years’ experience in the oil and gas industry as an HVAC engineer for HVAC contractors and consultants. Worked on HVAC system design for onshore and project management. Knowledge in the design of HVAC systems such as heat load, duct pressure loss, equipment selection, air distribution system etc. Major experience in project management, Engineering works, technical evaluations, cost estimation, Operation and maintenance, and preparing HVAC system documents and drawings. Total 4 years’ experience in M&E systems for industrial and commercial buildings. Worked on ACMV, HVAC systems, Building Automation Systems (BAS) for HVAC installation and testing, and commissioning. Major worked in the semiconductor industry and focused on the cleanroom system which included design and build, renovation and improvement of HVAC system.
Engineer, Manager
> 20 years experience in ofshore, subsea & pipeline including deep water experience in oil & gas across Concept, FEED, Detail Design and EPCI. Familiar with various codes and standards such as ASME, API, DNV and ISO. Experienced in Subsea, Umbilical, Riser, Flowline (SURF) expertise, subsea field development involving various subsea production, control, distribution system, umbilicals, risers and flowlines.
Engineer, Manager
17 years of Project & Construction Management experiences in oil and gas industry for both Greenfield/Brownfield onshore and offshore projects.
Other
Has more than 25 years of experience with involvement in engineering process design including process engineering design offshore oil and gas facilities. Software tools used for offshore, and onshore process engineering design:Aspentech Engineering Suite family products,SIMSCI family products, Unisim Design R440, Softbits family products and Sunrise pipe net family products. Software tools used for subsea process engineering design: Schlumberger pipesim and Scanpower OLGA. Managerial role: Managed a number of technically disciplined projects and managed multi-disciplinary studies. The role involves execution of concept studies, feasibility studies and FEED in accordance with client requirements. Design role: Applying experience and expertise in process system and equipment specification and design. This role works closely with the project managers, engineering team, and operations team to provide process engineering support and technical input. Carry out process simulations, hydraulic analysis, and equipment evaluations for existing and new process system
Engineer
1. Total working experience of 15 years in engineering field. 2. Have worked with vendor, consultant and end-user companies. 3. Specialized in valve and instrument engineering. 4. Tough nature to work at both on & off site jobs.
Engineer, Manager
19 years of experience as an Engineer and Business Development professional in the Oil and Gas industry, bring expertise in driving projects and securing partnerships. Holding a Bachelor’s degree in Chemical Engineering and fluent in English, currently serve at PT Wijaya Karya (Persero) Tbk., specializing in EPC/EPCI Oil and Gas Industries. Proven track record in securing new contracts and fostering collaborations with National / International companies to successfully execute oil and gas projects.of ex
Engineer, Manager, Superintendent, Other
My name is Saqib Ali, and I hold a degree in Mechanical Engineering with 05 years of valuable professional experience. During my career, I had the privilege of contributing to significant projects, including the greenfield project at Nishat Sutas Dairy and a brownfield project at COCA-COLA Beverages PAKISTAN(CCI). In these roles, I played a pivotal role in managing utility and process piping projects, overseeing the installation of Piping, valves, Pumps, and Plate Heat Exchangers (PHEs). My expertise extends to creating comprehensive 2D and 3D drawings, Hydrotesting of piping, piping, enabling precise project execution as per engineering specifications. I have excellent skills of Solidworks and AutoCAD and good knowledge of International standard (ASME,ISO,ASTM,API ). I am enthusiastic about exploring new opportunities where I can leverage my skills and experience to make meaningful contributions.
Engineer
Committed and professional electrical, instrumentation and automation engineer familiar with standard electrical, instrumentation and automation requirements. More than twenty years experiences in proposal/tender, engineering design, procurement and project execution of electrical, instrumentation, automation control system and its construction for oil and gas, manufacturing and petrochemical industry. Strong management and leadership abilities for delegating tasks or providing instruction clearly and accurately. Prioritize, organize work and meet deadline. Strong communication skills, ability to work independently with best in team, self-motivated and ability to manage changing priorities.
Engineer, Manager
graduated in
Drafter / Designer