Rotating freelance

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Experienced electrical engineer with a proven track record in engineering, commissioning, and construction within the Oil and Gas and energy sectors. Specialised in power plant control, protection systems, and high voltage equipment. Adept at collaborating with cross-functional teams to develop comprehensive electrical and instrumentation solutions. Proven success in project management, compliance with industry standards, and troubleshooting complex issues. Seeking opportunities to expand expertise in high voltage electrical systems to further contribute to the field. Committed to professional growth and aiming to become a Professional Electrical Engineer within the next 5 years.

Engineer

Seeking challenging position in Mechanical with growing organization that can enable me to apply my knowledge, skills and experience in the best interests of organization to further my personal and organization goals. Professional Experience • Thirteen years vast experience in Machinery/mechanical/Maintenance field different Organization Onshore and Offshore pre-commissioning, Commissioning, Start-Up & Maintenance field such as, Oil & Gas Industry (FPSO) and merchant vessel. Leverage strong values & substantial Technical experience to continuous moves ahead & strive s to achieve high professional capabilities thereby adding values to organization and s elf. An effective communicator with excellent relationship management skills and stro ng analytical, leadership, problem solving & organizational abilities. Career summary Oil and Gas ( FPSO ) Industry Experience • 5 years of experience on FPSO, Offshore Maintenance and Operations of Engine Room and Topside machinery. • Major Contribution to Conversion and commissioning of traditional oil tanker in to FPSO and sail away to location. • Compliance and pro-active with Safety and Environmental procedures. • Daily Job Planning and Supervision. • Fully conversant with Offshore PTW system and major contributor in Job Safe Analysis (Risk Assessment) to all routine and critical jobs. • Yearly (TAR) Turn Around :- Job Planning and execution and supervision • Conversant with Fire and Gas System, Plant behaviour on ESD0, ESD1 and ESD2 • Engine Room and Top side Steam Plant Operation and Maintenance Panning, scheduling, supervising. • Continuous Training to local Watch Keepers. • Creating and establishing safe working practices/procedures for E/R and topside operations/ maintenance. • MDO bunkering and Oil Record Book updation.

Engineer, Supervisor / Technician

Graduate in mechanical engineering with 2 years of professional experience in piping of EPC projects like petrochemical plants, thermal power plant, and chemical plant, and 5 years in mechanical packages design (static and rotating) for oil & gas applications. Familiar with various types of welding processes, welding electrodes, welding electrode selection, WPS, PQR, NDT, PWHT, P91 welding, Induction heating machine. Experienced in overhauling centrifugal and reciprocating pumps, and a successful package engineer in delivery of various mechanical skid packages. Solid command of technologies, tools and best practices in designing mechanical equipment using AutoCAD and engineering drawings. Strong team collaboration skills, highly organized, prioritizes communication, and able to implement analysis and evaluation skills.

Engineer

Detail-oriented mechanical & piping engineer with 2 years of experience in oil & gas industry. Proven ability to manage and contribute to design, stress analysis, and layout of piping systems while ensuring compliance with industry standards and maximize safety.

Engineer

Proactive and multi-skilled Instrumentation & Control professional offering over 35 years of cross-functional experience in Design, Engineering, Project management, Functional safety lifecycle management, OT cybersecurity lifecycle management, OT systems networking and integration, Rotating machinery control & monitoring system, Pipeline control and monitoring system, Analyzers and shelters, Steam & water analysis system, Continuous Emission Monitoring System, Tank Gauging and Metering system, Vendor Package systems, Plant maintenance, Plant reliability, Technical coaching & training, SAP, Six sigma, Total Quality Management system, Internal and external auditing, Human resources planning and management.

Engineer, Manager, Inspector

A first-class Petroleum Engineering Technology graduate, with a strong focus on process optimization, process safety management, plant operation, performance monitoring and safety compliance enhancement. Available to start working immediately and willing to relocate for suitable opportunities.

Engineer

Fifteen years experiences in the O&G company and Detail Design of various projects for oil & gas.

Engineer, Superintendent

Senior Maintenance Engineer with 10 years' of experience in Oil & Gas Industries specifically in Rotating Equipment and Equipment Reliability. Constantly ensuring high equipment availability and strive for minimum equipment downtime by performing proper planning and execution with safety as the first priority. In addition, led Root Cause Failure Analysis (RCFA) investigation, Management Of Change (EMOC) & managing financial budgeting. My main responsibility as a rotating engineer is to reduce likelihood of emergency/unplanned maintenance in which causes downtime & delay in production target.

Engineer, Manager, Other

Results-driven mechanical engineering professional with a strong background in project planning, execution, and maintenance within the energy and oil & gas sectors. Proven track record in optimizing mechanical systems for enhanced operational efficiency. Collaborative team player with expertise in ensuring project delivery within specified timelines. Adaptable to dynamic work environments, committed to continuous improvement, and compliance with industry standards. Seeking a role to contribute technical prowess and strategic insights to a growth-focused organization.

Supervisor / Technician

Engineer Mechanical Commissioning and O&M with experience in pre-commissioning of piping and connected equipment, project management, and maintenance activities. Proficient in supervising, monitoring, controlling phases of project lifecycle, inter-discipline coordination, administration, and resource planning.

Engineer, Supervisor / Technician

My name is Bambang Aldhi Satrio Heriyono and I graduated from Institut Teknologi Nasional Bandung with a bachelor's degree in Mechanical Engineering. I have more than 15 years of experience as a QAQC Coordinator/ QAQC Engineer/ QAQC Inspector (with Welding, Mechanical, Piping, Structure and Tank construction activity) in Power Plants, Oil and Gas, and Mining projects and a valid qualification for International Welding Engineer, Welding Inspector-CSWIP 3.1, Welding Inspector-B4T, NDT ASNT-TC-1A Level II of UT/MT/PT, Radiographic Interpreter and Corrosion Inspector.

Inspector, Supervisor / Technician, Other

Having 14 years of experience in For Refinery(RCC Pertamina RU VI), Power Plant(Coal Fired Suge Belitung, Mobile Power Plant Banda Aceh), Petrochemical(Sriwijaya Fertilizer, Banggai Amonia Plant), Geothermal (Lahendong Geothermal), FPSO(Feed Inpex Masela FPSO,Inpex Ichthys FPSO, FPSO Petronas 1), Well Head Platform(Tutung Platfotm, OO-OX Platform), LNG Plant(Donggi Senoro LNG,FEED Malaysia LNG Train 9) projects in FEED, detailed engineering design and construction support, as Senior, and Engineer in Mechanical Static and Piping Pipeline Engineering design (Offshore and Onshore Project) Pre-Service, and In-Service (Greenfield and Brownfield), with a variety of projects in Oil and Gas Industry. Experience working with National and Multinational Company for Oil and Gas Company (Client-side), EPCI company (Contractor) and Engineering Consultant Company. Mechanical Piping engineering expertise/experience includes the following: •        Piping Stress Analysis and Piping Material of fixed offshore platform, and Floating Offshore ,Refinery, Power Plant,Pertochemical and Geothermal, LNG Plant for feasibility study, conceptual, basic engineering, FEED, detailed design, and EPC/EPCM projects. •        Mechanical Engineer For Static Equipment(Pressure Vessel, Pig receiver, Reactor, Flare Stack, Regenerator, Orifice Chamber,etc), Rotating Equipment (Pump, Compressor, Turbine), Package Equipment(CO2 Snuffing Package, N2 Package, Crude Oil Crude Oil Stabilization Package, Dilution Water Package, Produced Water Treatment Package, Chemical Injection Package) •        Experience in detail engineering and EPC project for mechanical and piping analyses of offshore structure (jackets and topsides) for Green Field and Brown Field Project during in-service and pre-service conditions such as in-place analysis, seismic analysis, fatigue analysis, lifting analysis, load-out analysis, and transportation/tow analysis. Detail design through local checks that covered connections, supports member strengthening, plate design, etc. Review of Design Drawings and Shop Drawing and coordinate interdisciplinary engineer tasks in the detail engineering stage. •        Reviewed, provided necessary recommendations, and approved EPC Contractor both offshore and onshore Greenfield and Brownfield Mechanical Piping engineering-related deliverables (Calculation, Drawings, and 3D Model). Providing and consolidating Company comments for the associated discipline in respect to the detailed design of onshore and offshore for Pre-service & in-service analysis, Pipe supports, Equipment supports, foundations, etc., during the EPC phase to ensure the Offshore Platform scope of supply is engineered, designed, and integrated to the overall project design and is consistent with project requirements. •        Prepared Material Take-Off (MTO) and Preparation of RFQ (Request for Quotation) and Technical Bid Evaluation (TBE), Commercial bid evaluation, clarification, reviewing vendor documents, and selecting qualified subcontractor at Procurement stage for Piping material. •        Attended Regular Internal, External, and Kick of Meeting (KOM), HAZID and HAZOP meetings, construction review meetings, coordination, and technical meetings with the internal project team, vendor, and subcontractor. •        Has strongly knowledge in the engineering/design, especially the piping material selection, piping components, pipe support, stress analysis, corrosion/erosion, painting, welding, QA/QC, construction, PDMS and piping codes & standards •        Familiar with piping design code and standard and related software e.g. Caesar •        Extensive experience in detailed equipment layout design, 3D model review incorporating piping design, operation and maintenance requirement. •        Experienced in engineering, fabrication, pre-commissioning and commissioning of piping component. •        Experienced in high H2S and high CO2 gas contents including the design of CRA material i.e. Inconel,Alloy •        Experienced in high temperature / high pressure (HPHT) facilities •        Having knowledge Carbon Capture Storage Utilities (CCSU) technology. Main Equipment of Carbon Capture Storage Utilities (CCSU) technology are Compressor,CO2 absorber, Coolers, Pulsation dampers and Diaphragm pump

Engineer

Able to take any challenges, able to work in various culture and environmental, self-motivated person, able to make a rational decision with limit of authority, hardworking, responsible and supportive to team member.

Drafter / Designer

Experienced Engineer with a Bachelor of Engineering (B.Eng.) focused in Mechanical Engineering from Institut Teknologi Bandung (ITB) and Master degree in Mechanical Engineering from Sriwijaya University. Strong experience in the oil & energy industry with almost 13 years working portofolio in Equipment handling, Piping System on LNG Plant, Oil Refinery, Petrochemical, Power Plant, and Mining. Specialized in Construction, Engineering Design, API, ASME Standards, Engineering, EPC, life cycle improvement of equipment, Stock Planning, and Total Cost Ownership of Equipment. I am able to lead /supervise integrated process of Design Review, Fabrication, Erection as Project Interface Engineer which is included in parts of Engineering Design, Procurement Process, Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Specialties: Project Planning, Engineering & Construction. Commissioning New Equipment and Processes. Process Piping and Mechanical Installations. Process Troubleshooting, Maintenance, and Replacement Team Leadership Technical Writer (procedures)

Engineer, Superintendent

I was a man with background from Mechanical Engineering. Have experience in Construction Project in Plant, Factory, Ship Yard and Oil & Gas.A highly motivated and dynamic individual, creative, fully of ideas and intention toward improvements, capable to work independently and as a team either.Easily to communicate among all levels of people good team player and multitasking capabilities. Familiar in using several kind of welding and measurement tools, tensioning and bolting. 

Inspector, Supervisor / Technician

Having experience more than 10 (Ten) years in Inspection & Quality Control including supervision & coordination, inspection and responsible for general quality control activities to confirm that they comply with specified procedure or Client requirement. Having experiences of job covering in QA / QC as Welding Inspector , NDT Inspector are in fabrication , erection and installation of piping fabrication installation of various material ( CS, SS, Duplex , FRP , PVC ) , pipeline fabrication installation both onshore & Offshore

Inspector

I am writing to put myself forward for the role of Mechanical Maintenance. As you can see from my CV, I have many skills pertinent to this role gained from various sectors, I wish to move into Your group, Because of my Career Development .The skills that I have and believe to be highly relevant to this job and your company/include. During my career . I have had many successes, Additionally, I have undertaken qualifications/training/voluntary work/research/name effort in destination career and believe my unique blend of skills can offer a great deal. I am confident that I possess the attributes you're looking for and that my experiences gained in my previous organizations, would provide invaluable insight and capability to your I would welcome the opportunity to discuss my application in person.

Supervisor / Technician

17+ years of experience in mechanical engineering, specializing in engineering and maintenance activities of Turbo-machinery - Gas Turbine for power generation and driving mechanical device (gas compressor and pumps), and also for centrifugal gas compressor for gas injection and export - for upstream oil and gas.

Mechanical Engineer with a strong educational background and experience in design, analysis, and project management. Skilled in computer-aided design, programming, data management, and fluent in Malay and English.

Engineer

Document Controller with 5 years of work experience working on various projects documentation. Personally handled all documentation daily (Correspondence, Technical, Field Inspection Notice, NCR, MCC, Turnover, Final Documentation) while maintaining Master Document List. This significant achievement ensures seamless workflows & reliable information access for various department.

Other

* Eager to learn new things and enthusiastic of doing works.

Engineer

Dedicated Petroleum Engineer with over 2 years of experience in upstream data analysis, field operations, and petroleum engineering. Proficient in managing subsurface data, real-time drilling analysis, and automation workflows using industry-standard tools like Petrel, Petra, and Schlumberger Studio. Known for analytical problem-solving, effective collaboration, and a strong commitment to operational excellence in the oil and gas sector.

Engineer, Supervisor / Technician, Inspector

Dedicated and highly motivated Mechanical Engineerwith 5 years experience in oil and gas industry aspiring to work for a company where expertise and skills in Mechanical Rotating Equipment can be used to achieve company's goals and targets

Engineer