Start Up freelance

* Total experience in the Oil and Gas Industry is more than 25 years, with details of 6 years in the field of oil refinery operations, and 18 years in the field of processing facility design (consisting of 15 years onshore and 3 years offshore) both in Indonesia and abroad (Sultanate of Oman and Brunei Darussalam) * Extensive experience in Concepts, FEED (Front End Engineering Design), DD (Detailed Design) for onshore/offshore processing facilities, refinery operations (Crude Oil Distillation Unit, Naphtha Hydro Treating Unit and Catalytic Reforming Unit) and also start-up & commissioning. * Experience in process studies (flow assurance study, dispersion study, etc.) and proficient in several process simulation software (HYSYS/UniSim, Shell FRED, FLARESIM, PIPESIM and OLGA).

Engineer

·      Forty-three years in the Safety, Industrial & Petroleum Industry. [February 1979-Present]   ·      Sixteen years as the Senior Canadian [Newfoundland] Government OH&S Officer for the offshore drilling industry, service companies and industrial onshore sites.   ·      Twenty-one years overseas experience in hostile and harsh/ hostile environments in safety and training.   ·      Work & Regulatory experience on Semi-Submersibles / Jack-ups / DP ships / Barges / Tenders / Pipe Lay Vessels/ Production Platforms/ Land Drilling and Work Over operations.   ·      Safety Specialist/Manager for the Government of Saudi Arabia in Al-Jubal, K.S.A.   ·      Senior HSE Manager for Nabors Drilling International in Dhahran, Saudi Arabia.   ·      Senior HSE Advisor & HSE Manager for Pride International in Chad, Africa.   ·      PHSE Manager - Project Management Team for National Petroleum Construction Company in Abu Dhabi, U.A.E.   ·      PHSE Engineer - Project Management Team for Eni Iran BV in Darquain, Iran.   ·      PHSE Manager - Project Management Team for Angola Drilling Company in Luanda, Angola.   ·      Drilling Standards Safety Specialist for Brunei Shell Petroleum [BSP] in Darussalam, Brunei.   ·      Safety Engineer for Sonangol P&P in Luanda, Angola & Accra, Ghana.   ·      Senior HSE Advisor for Petro Canada in Tripoli, Libya.   ·      HSE Advisor for Flint Energy Services Ltd.  in Ft. McMurray, Alberta   ·      Senior HSE Advisor for Genel Energy International in Dahuk, Iraq   ·      Senior HSE Advisor for Sterling Energy International Ltd. in Sulaymaniyah, Iraq   ·      HSE Advisor for Onyx International Inc. in Saskatchewan, Canada ·      Senior HSSE Advisor with BP/ Rumaila Operating Organization [ROO] in Basra, Iraq.   ·      Drilling EHS Operations Team Lead for Tullow Oil in Accra, Ghana.   ·      Safety Training Coordinator for Smedvig Asia in Pointe Noire, Congo.   ·      Senior Consultant with National Safety Consultants Co. Inc. [1983-1988]   ·      Owner & Senior Consultant with World Wide Safety Co. [1996 – Present]   ·      President S & D Communications Ltd. [1988]   ·      Certified Competent Toastmaster [CTM] from Toastmasters International. [1990]   ·      Canadian Registered Safety Professional – CRSP [1989]   ·      Safety Degrees from the United Nations thru World Safety Organization [WSO] with two specialties as below.   ·      Certified Safety and Security Director – CSSD [1986]   ·      Certified Safety Executive – CSE [1986]   ·      Certified Safety Manager – CSM [1986]   ·      Certified Safety Specialist in "Occupational Health & Safety" [CSS OHS] [2002]   ·      Certified Safety Specialist in "Oil Well Drilling and Systems" – CSS [OWD&S] [2002]   ·      Certified Professional Manager – P. Mgr. [2007]   ·      Police Trained Professional Accident Investigator – RCMP & RNC [1980’s]   ·      Assisted in Investigation of the Ocean Ranger rig sinking disaster – [1982 – 1984].   ·      Government OHS Officer for the fabrication of the Hibernia GBS platform for offshore Eastern Canada.   ·       Countries worked – Canada/ Egypt/ Saudi Arabia/ Chad/ U.A.E/ Iran/ Angola/ Algeria/ Congo/ Ghana/ Libya/ Thailand/ Kurdistan/ Iraq and Brunei.   ·      International Membership in the Association for Canadian Registered Safety Professionals [1984].   ·      International Member in World Safety Organization - United Nations [1986].   ·      Member International Institute Risk & Safety Management [2012]   ·      Member Association for Canadian Registered Safety Professionals [1989]   ·      Government representative on Board of Directors “Safety Engineering Technology” Program for Memorial University of Newfoundland - Marine Institute of Canada [1984-1986].   ·      Refer " LinkedIn" professional profile –   https://www.linkedin.com/in/david-russell-crsp-cssd-cse-csm-css-ohs-owds-ctm-86a62a1b0/

Manager, Superintendent, Inspector

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

Senior Upstream Oil and Gas industry technical professional; over 25 years' experience providing solutions in demanding engineering, operations, and project management roles. Extensive global network. Key skills include: Comprehensive E&P Industry knowledge: Thorough understanding of the key fundamentals of the E&P industries' engineering disciplines. Proven ability to leverage these effectively to create business value and reduce HSSE risk. Project Management Exploration, Production Use basic and appropriate safety engineering practices, involve workforce in Process Safety, Improve safety culture, shared values in attitude and approach comes from leadership. Manage project delivery schedule, strictly implement project compliance to ensure project delivery complies with regulations. Responsible for project scope, schedule and cost, detailed planning and motitoring progress and delivery during the implementation phase. Operations Management: Expertise leading Field Development and Operational plans. Held line management project, production, maintenance & HSSE responsibility for complex offshore operation with annual CAPEX and OPEX budget. > $100M. Highly experienced and skilled in setting and managing budgets, operations and safety. FPSO's, subsea facilities and pipelines.

Engineer

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

Luis Antonio, is a motivated, energetic, accomplished professional with extensive experience in the upstream oil and gas: Drilling, Workover, Completion, P&A Wells Projects and Decommissioning Well Operations as well. Determined and Decisive; Uses Initiative to Develop Effective Solutions to Problems and Provide Technical Support to Resolve Challenges of the Well Engineering Planning-Design, and Rig/Well-Site Operational Support. Results-Driven, Logical and Methodical Approach to

Engineer

Over

Over two decades of experience in design office and fieldwork combined for both offshore and onshore environments, managing related scope of work for oil and gas facilities in both green and brown field. Performed various duties and responsibilities throughout career in every facet of asset life cycle, covering engineering, construction, offshore hook-up & commissioning, plant start-up, and offshore facilities operation activities. Additionally, led a successful offshore campaign for asset’s end of life cycle, seeing through production cessation, facilities’ hydrocarbon free status, asset demobilization, field’s plug and abandonment, and decommissioning activities with occasional involvement in shutdown campaign. Recently involved in one of high capacity FPSO, executing Detailed Engineering Design for Petrobras’ P82 FPSO including procurement support and FEED verification activities, as well as involvement in FEED for Malaysia’s first CCS (Carbon Capture & Storage) facilities at Kasawari CCS. Prior to joining Ranhill-Worley, Faroak has expanded his experience in mechanical engineering and overall facilities functionality, leading overall campaign of Hook-Up & Commissioning for Mubadala’s Pegaga (SK320) until early phase of operation. End-to-End experience in mechanical equipment engineering and application, primarily in rotating and packaged equipment encompassing DED, FEED, feasibility study, HUC, O&M and asset revitalisation for topside facilities, in various roles and functions. Sound knowledge and experience with field activities including operational duties, commissioning, hands-on experience in equipment alignment, fault findings and troubleshooting. Also equipped with experience and understanding of process scheme and requirement with the knowledge of essential components of instruments, electrical and other multi-disciplines requirement. All these experience and involvement have supplemented value added knowledge to every role and function at any execution phase. Well versed in overall roles and functions in EPCIC framework, managing team of engineers executing engineering activities, procurement support, contract management, vendor package management, bid evaluation to PO issuance, fabrication, testing (FAT), inspection and delivery and hook-up commissioning & start-up, meeting the quality and delivery within the specification, schedule, and budget whilst keeping adherence to HSE values. Understand risk, change control, and interface management between disciplines, departments, and other stake holders. Capable to support tender proposals including CTR’s preparation and generation of scopes of work, and engineering studies for mechanical and HUC activities.  Management experience with strengths in leadership, communication, negotiation, with the ability to provide solution to engineering and operational problems, as demonstrated among others leading field operation at Repsol’s South Angsi ‘A’, HUC at Mubadala Energy and detailed engineering for Petrobras’ P82. Good in nurturing and guiding young engineers and developing high performance team.

Engineer, Manager, Other, Superintendent

This is to hereby submit my candidature, against the existing "Snr. Process Engineer" role. Kindly note that I hold a Bachelors of Engineering (B.E) chemical engineering degree , and I am experienced (17+ years) in natural gas sweetening/ dehydration, compression, LPG /NGL Recovery / oil stabilization, petrochemical, and plastic (PET resin) manufacturing plants' process design (Basic/ FEED and detailed engineering), project execution/pre-mechanical completions checking, pre-commissioning, commissioning, startup and operations. I am skilled at; 1. Process design (Conceiving of the Simulations; HMB, Hydraulics Studies, Equipment Sizing, Design documents and Manuals etc)  2. Pre-commissioning, commissioning and startup as well as the Process operations of; a) Petrochemical b) Plastic resin production c) Natural gas processing (sweetening, dehydration and LPG recovery), d) oil handling, multiphase flowlines and separation e) Gathering and dispatch systems & metering. f) Crude oil, LPG storage, metering and dispatch systems. g) OSBL/ Process utilities including Flare, Firewater network,Fuel gas, I/A & N2, P/W etc 3. Process and Operational Safety  4. Project execution/ Interfacing. Moreover, I am well versed in process plant design documents such as the PFDs, P&IDs, C&E matrix, Philosophies, Data sheets, Manuals. I have generated and been a part of the teams that developed SOPs I have been scribe and part of the several Safety studies (HAZID, HAZOP,SIL) I have working experience with applicable national and international codes & standards including but not limited to APIs, ASME, NFPA etc. I am a steadfast team player and also I would come handy in prolonged field assignments and different locations as well. Further to above please note that from Aug 01st, I am immediately available to join

Bachelor in Chemical Engineering, As a Process Engineer at OCIM Sdn. Bhd., I supervised production quality and supported technicians for smooth operation. Notable achievements include enhancing equipment design and process quality in 2023, leading a Distillation Tower start-up, and managing plant process enhancements in 2024. During my Testing Engineer training at SIRIM QAS International Sdn. Bhd., I specialized in product safety testing for metallic materials, gaining expertise in failure analysis.

Engineer

Aeronautical Engineer and brazilian entrepreneur, I'm looking for opportunies for my company to work with engineer not only in Brazil but also abroad. Passionate about new technologies, Airplanes and Energy transition, I'm eager to help your company accomplish your main tasks. Looking forward to hearing from you! Best regards, Abner.

Operations Process Engineer with 9+ years of experience in oil and gas production operations and project management. Proven expertise in supervising plant operations, commissioning activities, and ensuring compliance with HSEQ standards. Strong background in HAZOP participation, risk assessments, PSSR execution, and process optimization, particularly in debottlenecking and improving operational efficiency. Skilled in managing site teams during installation, commissioning, and startup phases, and supporting the development of operating procedures and training programs. NEBOSH-certified, with a focus on safety, leadership, and operational excellence in complex environments.

Engineer, Manager, Superintendent, Supervisor / Technician

Highly dedicated and skilled Instrumentation and Control Engineer with over 15 years of hands-on experience within Oil & Gas industry. Experience covers across DEFINE-SELECT-EXECUTE-OPERATE phases for both greenfield development and brownfield improvement projects. Proficient at communicating effectively and able to work independently with strong leadership traits to drive a synergy collaborative working environment. Expertise includes project engineering implementation within I&C discipline design deliverables specifically to ICSS (Integrated Control & Safety Systems) scope with wide exposure on all interfacing packages details. Broad career experiences across diversify job functions via various attachments to EP Operators, Design Consultants, HUC service providers, systems integrators, etc in EPC/ EPCIC contract environments. Well versed in EP Engineering Management Framework business model as previously described phases from identifying new business case with opportunity framing/ realization, PEP roadmap articulation, PS benchmarking - inadequacy Study including gaps closure/ recommendation and governance compliance to maximize/ safeguard values ensuring effective mission statement decision in line with FDP investment proposal. Paramount interest on Renewables technology, CCUS and its application deployment. Capable on representing COMPANY for official discussion with Host authorities, Client/Contractor, leading the team towards higher confidents with positive results.

Engineer, Manager, Other

WITH 30YRS AS COMMISSIONING AND START UP ENGINEER MAINLY IN LNG PLANTS OVERSEAS, 8YRS IN LIBYA LNG, 8YRS IN NIGERIA WITH SHELL LNG INCLUDING COMMISSIONING AND OPERATIONG 4 NEW LNG PLANTS INCLUDING ALL ASSOCIATED UTILITIES, LNG SHIP LOADING, CONDENSATE LOADING, GAS EXPORT COMPRESSORS,ALSO IMPLEMENT ELECTRONIC PTW SYSTEMS, INVOLVED WITH ALL CONSTRUTION MANAGEMENT TEAMS. AND NUMEROUS LNG PROJECTS WORLD WIDE AS COMMISSIONING ENGINEER/MANAGER

Engineer

Instrument & Control Engineer with 11 years of experience consist of Manufacturing and Oil & Gas Industry. Involve in various stages and project for Detail Design, Engineering (FEED),Installation, Hook up / Construction, Testing and Commissioning of DCS, plant maintenance for electrical and instrument, construction of interconnecting facility for telecommunication (fiber, system & telco cabinet, and gas detector), Instrumented Protective Function classification, verification & report and Fire & Gas Mapping, Control Systems, Safety Instrumented System Fire & Gas System, Field Instruments and various measurement equipment (custody transfer, metering, fire alarm system, fire and gas system, QMI analyzer, TGS etc) in Oil & Gas industry. Also Involve in production of TV and HDD Testing with a various software tools and debugging in Manufacturing Industry.

Engineer

10 years of experience working for electrical engineer (Field Engineer and Commissioning Engineer) in Oil and gas, petrochemical and power plant project is make me more excited and challenged to working on project (onshore and offshore).

Engineer

I work as Chief Rig Mechanic With 15 years of experience working in all stages of oil and gas field evaluation and development, their goal is to search for hydrocarbons in the most effective way and solve any operational problems. I can also be responsible for using drilling tools and techniques and getting the most out of old or poorly performing wells during the entire extraction process. It also reduces the impact of drilling on the environment and ensures compliance with environmental protection laws

I'm currently working with Pascal Energy, focusing on well intervention and pumping operations. This role has strengthened my skills in wellsite execution and pressure control. Previously, I worked as an Assistant Engineer at Pride Equip, where I was involved in equipment fabrication and refurbishment for oil and gas projects, including high-pressure pumps and hydraulic systems. With a First Class Honors in Petroleum Engineering from UTM, I offer a solid mix of technical knowledge and field experience, especially in well intervention and mechanical systems.

Engineer

* Offshore Operation Engineer at Reliance industries limited(May 2024- Present) * Control Room Engineer at Vedanta limited(Nov 2020- Mar 2024)

Engineer

Result-driven Equipment Engineer with 2 years of experience in manufacturing industry and 1 year in construction industry. + Specialize in installing, commissioning, and troubleshooting production equipment, including junction boxes, connectors, and framing machines. + Collaborates effectively with cross-functional teams to identify and address challenges. Proficient in troubleshooting and technical support. + Committed to maintaining compliance with industry regulations. Excellent communications and interpersonal skills facilitate productive relationships with stakeholders. + Ensured safety and operational compliance across diverse industrial processes.

Engineer

Accomplished operations leader with over 10 years of experience driving operational excellence, cost optimization, and organizational growth in the chemical and energy sectors. Adept at leading cross-functional teams, implementing strategic initiatives, and fostering a culture of continuous improvement to achieve sustainable business results.  

Manager

Profile: An experienced Subsea Controls Lead Engineer, currently responsible for the design, build, testing and delivery of a new state of the art in-riser control system. Other experience includes successfully delivering the FEED, design engineering, testing, commissioning, and start up of the Subsea Control System for Total's 70 well, 20 manifold deep-water Kaombo project. Chartered Engineering qualified (CEng) with over 8 years' experience that has covered all stages of major projects, including leadership and management responsibilities. To complement this diverse wealth of experience is a 1st Class Engineering Master's Degree with Honours, obtained from the highly prestigious University of Glasgow. A well-rounded Professional Engineer with charisma and passion that becomes infectious to others. Obtains a natural ability to read difficult situations quickly which has been a formidable skill when leading a team and developing fellow colleagues. Ensures a high focus on Client requirements as well as timely results, always adhering to HSE and others well-being.

Engineer

Electrical and instrumentation technician specialist in commissioning and start-up.

Supervisor / Technician

Top-performing Project Logistics and Materials Professional with 32 years industry experience, diverse and flexible experience in Green and Brownfield International Frontier locations on and off-shore, leading project teams & Contractors through diligent Site Safety Leadership during:   ·       Setting up of In-Country Infrastructure, Supply Bases, Fabrication Facilities in remote locations ·       The Fabrication, Installation and Commissioning of SPS/SURF developments in Ultra Deep Water ·       FPSO Shipyard preparedness and Sail away through to HUC ·       LNG construction from early works to commissioning and systems handover. ·       Experienced in Off-shore Installation operations on Pipelay vessels, MPCV’s and Cable Laying ·       Decommissioning and Recycling of recovered Subsea Infrastructure   16 years of Major Operator experience, excellent Contractor performance management. A collaborative communicator focused on building relationships. Owning the scope, building team morale, having a bias for action, spotting trends through data analysis and acting on them