Static Equipments freelance

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Ø Twenty-Four (24) years combined work experience mostly mechanical/Piping/structural/Welding within Oil and Gas industry covering construction, mechanical completion and commissioning of offshore platforms such as FPSO, FLNG, Semi-Submersible FPU, Jack-up Drilling Rigs, topsides, hull, LQ, Turret and onshore facilities such as petrochemical and oil refinery plants. Ø Poses good technical knowledge in project management, detailed engineering, site supervision, work planning, cost estimation, QA/QC inspection/ QMS audit, mechanical completion, pre-comm and commissioning of process/utility/power piping and static/rotating mechanical equipment’s/packages (pressure vessels, moorings, pedestal cranes, compressors, Power generators, motor & gas driver pumps, Gas Turbines Generators, Steam and diesel Generators, and various processing and utility skids/packages). Ø Currently looking for job and previously held a position of Mechanical/Piping Construction Lead at British Petroleum (BP), Mechanical Construction Superintendent, Lead Mechanical/Piping Commissioning Tech, Lead Construction/MC (Mechanical/Piping/Structure/HVAC), Piping Construction Superintendent, Site Piping/HVAC Engineer, Project Engineer (Piping/Mechanical), QA/QC Engineer, QC/MC System Coordinator (Piping/Mechanical/HVAC), Lead QC Inspector (Mechanical/Piping) and QC Inspector (Mechanical/Piping/HVAC) in performing assigned responsibilities/duties within the client, Third party consultant, and main contractor. Ø Working experience in reviewing, auditing, and checking contractor’s QA/QC, Construction, MC & Commissioning procedures. Ø Working experience in reviewing of detailed engineering drawing and ensure shop drawing deliverables within schedule. Ø Well verse in installation supervision and inspection of Mechanical/ packages from construction, through MC, Pre-com and commissioning of process, marine, utility, firefighting, lifesaving, lifting and mooring equipments. Ø Well verse in piping installation and inspection, MC/Pre-com/Comm documentation & execution such as line check, flushing/cleaning, pressure test, air blowing, chemical cleaning, bore scoping, oil flushing/testing, flange management system, re-instatement, tri-party system walk down, N2/He leak test, cleanliness & preservation, tightness test and nitrogen purging/inerting, smoke testing of deluge system, function/running test, etc. Ø Good working knowledge in welding Inspection/supervision, procedure preparation and review (WPS, PQR, WQT) Ø Working experience in conducting/interpreting NDT/E (UT, RT, MPI & PT). Ø Experienced in carrying out close loop cold/hot commissioning on process and utility systems, static and running test of process & safety equipment and fuel gas introduction. Ø Conversant with commonly used construction codes & standards in oil and gas such as: AWS D1.1, ASME V, IX, XIII, B31.1, B31.3, B16.1, B16.5, API, ASTM, Shell DEP, MESC, Norsok, British Standard, etc. Ø Have strong working knowledge of construction contracts, project technical specifications, contractor procedures and Construction work sequences/constructability for topside and hull. Ø Conversant with Engineering drawings such as GA, P&ID, PFPS, and Isometrics. Ø Proficient in using computer programs/Software (MS word, excel, power point, outlook, etc.). Knowledge/Experienced in AutoCAD and Naviswork PDMS modeling. Ø Knowledge/experienced in implementing Quality Management System and Quality auditing in accordance with ISO 9001, provided the understanding and knowledge required in implementing project Quality Management System successfully. Ø Attended various HSSE Induction, Trainings and Awareness programs and gained broad knowledge on safety throughout those years of involvement in construction of offshore/ on shore platforms to work safe and can influence colleagues/contractors to deliver the project safely. Ø Good working knowledge in preparing/implementation of JSA/JHA and lifting procedure. Ø Good leadership skills and good communication skills with ability to influence and encourage personnel. Ø Capable of proposing project adjustments and alterations promptly and efficiently Ø Can work independently/ in teamwork under pressure and adoptable with multi-national/cultural personnel at all levels.

Engineer, Superintendent, Supervisor / Technician, Inspector

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

A mechanical engineering graduate now working as project engineer. Come with technical skills such as technical and commercial proposals, project management, planning, scheduling, fabrication, cost controlling and also design. Familiar with standards from ASME, API, PETRONAS and ExxonMobil. Have experience dealing with quality control, procurement process and managing sub-contractors and also vendors. Also been exposed with several soft skills development such as teamwork, leadership and professional communication. Aspiring to seek for career advancement in the industry.

Engineer, Inspector

Graduate in mechanical engineering with 2 years of professional experience in piping of EPC projects like petrochemical plants, thermal power plant, and chemical plant, and 5 years in mechanical packages design (static and rotating) for oil & gas applications. Familiar with various types of welding processes, welding electrodes, welding electrode selection, WPS, PQR, NDT, PWHT, P91 welding, Induction heating machine. Experienced in overhauling centrifugal and reciprocating pumps, and a successful package engineer in delivery of various mechanical skid packages. Solid command of technologies, tools and best practices in designing mechanical equipment using AutoCAD and engineering drawings. Strong team collaboration skills, highly organized, prioritizes communication, and able to implement analysis and evaluation skills.

Engineer

Well versed in planning with exceptional problem solving and troubleshooting skills seeking a position in which these skills can be utilized and enhanced for betterment. Adept in carefully diagnosing and assessing issues and offering viable solutions.

Engineer

To be part of a reputed firm and to work as a key player in challenging and creative environments that offers ample opportunities to add value to the firm and improve my personal skills, & To provide satisfactory services to Client.

Engineer, Manager

Bachelor’s Degree in Mechanical Engineering, with extensive experience in asset integrity and inspection. Certified as an API 510 Pressure Vessel Inspector and API 570 Piping Inspector, I bring a strong background in non-destructive testing (NDT) techniques. I am proficient in interpreting technical drawings and conducting thorough inspections of both offshore and onshore static equipment. My expertise includes evaluating the condition of static assets, recommending corrective actions, coordinating NDT activities, overseeing repair works, and compiling detailed reports using asset integrity management systems. Well-versed in international construction and inspection codes, including API and ASME standards, I am eager to apply my skills and knowledge to ensure the integrity and reliability of static equipment and structures within a dynamic engineering team. 

Inspector

I was a man with background from Mechanical Engineering. Have experience in Construction Project in Plant, Factory, Ship Yard and Oil & Gas.A highly motivated and dynamic individual, creative, fully of ideas and intention toward improvements, capable to work independently and as a team either.Easily to communicate among all levels of people good team player and multitasking capabilities. Familiar in using several kind of welding and measurement tools, tensioning and bolting. 

Inspector, Supervisor / Technician

·      Accomplished professional with over 2 decades of global experience (Gulf 21 Years, India 2 Years) in Pre commissioning and Commissioning of Rotary & Static Equipment, Installation. ·      Approve the CMMS (Maintenance Management System) database to make sure that all equipment has the correct technical details, master maintenance documents and properly scheduled preventive. ·      Maintenance to achieve the Asset Care Policy RCM. ·      Working with Rotary & Static equipment MCL & BCL Type Centrifugal Compressor, Integral gear compressor, Screw compressor, Reciprocating Compressor, Heavy duty dear boxes. ·      Extensive experience in leadership, planning, scheduling, and implementing maintenance of rotating equipment in the Petroleum Refineries, Petrochemical, Oil & Gas Plants and Chemical Industries ·      Proficient in developing & streamlining systems with proven skills to enhance operational effectiveness & meet operational goals within cost, time & quality parameters. ·      Comprehensive knowledge of various API standards for Rotary Equipment like API-610, API-682, API-672 API-618, API-619, API-692. ·      In-depth knowledge of safe working practices, ISO 9001: 2000, ISO 14001: 1996, and ISO 18001: 2000, ISO5199, ISO9906 and so on ·      Commands proficiency in Diagnosis & Troubleshooting, Root Cause Analysis, Site Removal, Rotating Equipment Maintenance, Procurement and Fabrication Operations ·      SAP System supervises the execution of major overhauls, specific repairs, and troubleshooting. ·      An enterprising leader with excellent communication, analytical, problem-solving & man management skills. ·      Discussed the commissioning sequence with the OEM/ Commissioning and Start-up Team. ·      Technical evaluation of FAT / SAT performance of major rotating equipment. ·      Familiar with sound knowledge of SAP-PM-CMM others MS Office applications. ·      Prepared the section’s budget and daily organizing the work orders through SAP System, supervises the execution of major overhauls, specific repairs, and troubleshooting.

Superintendent, Engineer

To secure position in the field of Mechanical Engineering, where I can apply my engineering skills to develop my career and company benefits.

Engineer

Results-driven mechanical engineering professional with a strong background in project planning, execution, and maintenance within the energy and oil & gas sectors. Proven track record in optimizing mechanical systems for enhanced operational efficiency. Collaborative team player with expertise in ensuring project delivery within specified timelines. Adaptable to dynamic work environments, committed to continuous improvement, and compliance with industry standards. Seeking a role to contribute technical prowess and strategic insights to a growth-focused organization.

Supervisor / Technician

25 years of experience in Petroleum Oil refinery Maintenance and project.

Manager, Engineer

An adroit Sr QA/QC Manager and Quality/Technical Lead Auditor/ Quality Control Coordinator (QCC) professional with 19 years of rich in hand working experience

Engineer, Manager, Superintendent

Dynamic and results-oriented Mechanical Engineer with a solid foundation in engineering mechanics, proficient in mechanical design, materials science and manufacturing processes, with a keen eye for details and a passion for innovation. Experienced in maintenance, project, collaboration and communication. Adept at leading multiple teams to deliver exceptional results. Skilled in using various software and stimulation tools. Proven track record of success in diverse industries including petrochemical, chemical manufacturing and oil and gas with a commitment to excellence and continuous improvement. Ready to leverage expertise to drive impactful solutions and contribute to challenging engineering projects in the oil & gas/petrochemical industry.

Engineer

Detail-oriented mechanical & piping engineer with 2 years of experience in oil & gas industry. Proven ability to manage and contribute to design, stress analysis, and layout of piping systems while ensuring compliance with industry standards and maximize safety.

Engineer

Results-driven Mechanical Engineer with 11 years' working experience in Oil & Gas and Petrochemical Industry. Strong combination of technical, cross-functional and project management skills. Certified Technology Professional (Ts.) under MBOT. Have vast capability skills & experience in Asset Integrity & Reliability Management, Process Safety Management (PSM), Operation & Maintenance and HSSE fields for offshore and onshore facilities.

Engineer

Bringing my Chemical Engineering background into the downstream petrochemical refinery operations, optimizing mixed-butane hydrocarbons for organic acid production - Maleic Anhydride through the partial oxidation of n-Butane. My role involves stabilizing process upsets and managing operations across the Upstream UOP Reverse Butamer Isomerization Plant Unit and the Downstream Distillation Plant Unit. Additionally, I focus on the reaction kinetics of CSTR fixed bed reactor operations and the Utility and Demineralized Water (DM) plant, along with preventive maintenance and turnaround activities. Previously, played a part in the Semiconductor Manufacturing line of PCB's for an American MNC and a minor role in the Renewable Energy industry, focusing on methane biogas generation from Palm Oil Mill Effluent (POME) for power generation and distribution. Aspiring to specialize in energy management, carbon crediting, and footprint control as part of low-carbon, sustainable growth solutions. 🌎🌡️🧪⚗️

Engineer

I am writing to put myself forward for the role of Mechanical Maintenance. As you can see from my CV, I have many skills pertinent to this role gained from various sectors, I wish to move into Your group, Because of my Career Development .The skills that I have and believe to be highly relevant to this job and your company/include. During my career . I have had many successes, Additionally, I have undertaken qualifications/training/voluntary work/research/name effort in destination career and believe my unique blend of skills can offer a great deal. I am confident that I possess the attributes you're looking for and that my experiences gained in my previous organizations, would provide invaluable insight and capability to your I would welcome the opportunity to discuss my application in person.

Supervisor / Technician

Well organized and motivated piping engineer with a demonstrated ability to work in high stress condition, skilled individual with experience over 10+ years in engineering design of piping/ pipelines. Handles various projects including piping for power plant, industrial, chemical and oil & gas industries.

Engineer

Having experience more than 10 (Ten) years in Inspection & Quality Control including supervision & coordination, inspection and responsible for general quality control activities to confirm that they comply with specified procedure or Client requirement. Having experiences of job covering in QA / QC as Welding Inspector , NDT Inspector are in fabrication , erection and installation of piping fabrication installation of various material ( CS, SS, Duplex , FRP , PVC ) , pipeline fabrication installation both onshore & Offshore

Inspector

I am Fahim Fahmi with a background in Mechanical, Bachelor Hons. 8 Years professional experience in the oil gas static mechanical equipment, offshore/onshore in Pressure Safety Valve. I am currently in Australia based on site, Woodside onshore plant for Engineering and Maintenance for Pressure Safety Valve.

Engineer

* More than 11 years of experience across India, Abu Dhabi, Iraq, Oman, Kuwait & Qatar as Piping Engineer, Piping Supervisor, Construction Supervisor in executing Oil & Gas projects. * Worked on fabrication & erection activities of U/G & A/G piping, CS, SS, LTCS & as in live and new plant. * Worked for Piping, Structure, Equipment, Cladding and all Mechanical related work. * Proficient with Eng. codes & specifications like ASME B.31.3, B.31.1, ASME-16.5 NACE standards * Rich experience of preparing piping related drawings like isometric, general arrangement, P&ID, pipe support drawings, plan, plant smart viewer (3D) and structure drawings * Perform piping Line Check and writing punch list then carrying out A punch clearing work prior to hydro test. * Supervised & led teams, allocated work profiles, prepared various reports and reported to the management & client. * Successfully led completion of projects MEGA TURN AROUND 2021 EP1 Machine Replacement Shutdown Project (QAPCO) Mesaieed, Doha Qatar, Kuwait New Refinery Project Package-5 Al-Zour (KNRP) Kuwait, Sohar Refinery Improvement Project (SRIP) Oman, Central Processing Facility (CPF) Badra Oil Field Iraq, Asab F F D Project Abu Dhabi (UAE) * Erection and alignment of fractionation columns, stripper column, sweetening and stabilization column, sour water stripper column and Amine regeneration column, Compressor, Turbine, Exchanger, Condenser, Pumps and Lube oil skid. * Erection and alignment of flare HP and LP knock out drums, slag catcher, water draw of vessels, electrostatic deserters, stage separators, fin-fan coolers, heat exchangers, purge bins, instrument air and plant air receivers, degassing gas boots, fuel gas scrubber, nitrogen purification vessel. * Supervise for installation of 1.6 KM onshore and 1.7 KM offshore Sulphur Belt Conveyor System including main Conveyor structure, 5 Transfer Tower structure, Magnetic Separator, Elevated Gallery, Ship loader and all Cladding work. * Skilled in executing piping erection, punch listing, hydro testing, and commissioning activities of complete piping system. * Collaborated with cross-functional teams to ensure completion of project. * Excellent communication & interpersonal skills with strong analytical, problem-solving, and organizational capabilities

Engineer, Superintendent, Supervisor / Technician, Inspector, Other

My name is Bambang Aldhi Satrio Heriyono and I graduated from Institut Teknologi Nasional Bandung with a bachelor's degree in Mechanical Engineering. I have more than 15 years of experience as a QAQC Coordinator/ QAQC Engineer/ QAQC Inspector (with Welding, Mechanical, Piping, Structure and Tank construction activity) in Power Plants, Oil and Gas, and Mining projects and a valid qualification for International Welding Engineer, Welding Inspector-CSWIP 3.1, Welding Inspector-B4T, NDT ASNT-TC-1A Level II of UT/MT/PT, Radiographic Interpreter and Corrosion Inspector.

Inspector, Supervisor / Technician, Other

•Reviewing fabrication and testing procedure (welding, painting, hydro test & NDT) to assure compliance with client specification. •Issue the project quality plan and inspection test plan •Perform or/and coordinate inspection when required. •Reviewing NDT and QC reports to assure result are within tolerance •Assist with engineering to assure that material selection and grades as per client requirement. •Managing interface with skidder through all the construction phases •Managing deviation request and technical inquires •Ability to perform skid P&ID conformity •Managing interface between notified body and company to get CE conformity certificate •Perform or/and coordinate CE dossier

Inspector, Manager, Supervisor / Technician